scholarly journals Enhanced heat transfer in working fluids using nanoparticles with ramped wall temperature: Applications in engine oil

2019 ◽  
Vol 11 (11) ◽  
pp. 168781401988098 ◽  
Author(s):  
Muhammad Arif ◽  
Farhad Ali ◽  
Nadeem Ahmad Sheikh ◽  
Ilyas Khan
Keyword(s):  
Molybdenum Disulfide ◽  
Wall Temperature ◽  
Base Fluid ◽  
Maxwell Fluid ◽  
Graphical Analysis ◽  
Engine Oil ◽  
Mathematical Expressions ◽  
Laplace Transform Technique ◽  
The Laplace Transform ◽  
Graphene Nanoparticles

The purpose of this article is to investigate the flow of Maxwell fluid with nanoparticles, that is, molybdenum disulfide and graphene with ramped temperature condition at the boundary, and engine oil is considered as base fluid. Furthermore, molybdenum disulfide and graphene nanoparticles are uniformly distributed in the base fluid. The problem is modeled in terms of partial differential equations with physical initial and boundary conditions. To make the system of governing equations dimensionless, we introduced some suitable non-dimensional variables. The obtained dimensionless system of equations is solved using the Laplace transform technique. From graphical analysis, it can be noticed that the velocity is high with isothermal wall temperature and lower for ramped wall temperature. These solutions are verified by comparing with the well-known published results. In addition, the physics of all parameters of interest is discussed through graphs. The mathematical expressions for skin friction and Nusselt number are mentioned and the obtained results are presented in tabular form. Finally, the effect of molybdenum disulfide and graphene nanoparticles is briefly discussed for the flow and heat profiles for Maxwell nanofluid.

scholarly journals Maxwell Nanofluid Flow over an Infinite Vertical Plate with Ramped and Isothermal Wall Temperature and Concentration

2021 ◽  
Vol 2021 ◽  
pp. 1-19
Author(s):  
Naveed Khan ◽  
Farhad Ali ◽  
Muhammad Arif ◽  
Zubair Ahmad ◽  
Aamina Aamina ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Molybdenum Disulfide ◽  
Wall Temperature ◽  
Base Fluid ◽  
Vertical Plate ◽  
Maxwell Fluid ◽  
Engine Oil ◽  
Isothermal Wall ◽  
The Impact ◽  
Infinite Vertical Plate

The aim of this study is to investigate how heat and mass transfer impacts the unsteady incompressible flow of Maxwell fluid. An infinite vertical plate with ramped and isothermal wall temperature and concentration boundary conditions is considered with the Maxwell fluid. Furthermore, in this study, engine oil has been taken as a base fluid due to its enormous applications in modern science and technologies. To see the importance of nanofluids, we have suspended molybdenum disulfide in engine oil base fluid to enhance its heat transfer rate. To investigate the flow regime, the system of equations was derived in the form of partial differential equations. The exact solutions to the complex system are obtained using the Laplace transform technique. Graphically, the impact of different embedded parameters on velocity, temperature, and concentration distributions has been shown. Through using the graphical analysis, we were interested in comparing the velocity, temperature, and concentration profiles for ramped and isothermal wall temperature and concentration. The magnitude of velocity, temperature, and concentration distributions is greater for an isothermal wall and less for a ramped wall, according to our observations. We observed that adding molybdenum disulfide nanoparticles to the engine oil increased the heat transfer up to 12.899%. Finally, the corresponding skin friction, Nusselt number, and Sherwood number have been calculated and presented in a tabular form.

A comparative study of heat transfer analysis of fractional Maxwell fluid by using Caputo and Caputo–Fabrizio derivatives

2020 ◽  
Vol 98 (1) ◽  
pp. 89-101 ◽  
Author(s):  
Nauman Raza ◽  
Muhammad Asad Ullah
Keyword(s):  
Exact Solutions ◽  
Fractional Derivatives ◽  
Numerical Solutions ◽  
Maxwell Fluid ◽  
Heat Transfer Analysis ◽  
Flow Parameters ◽  
Fluid Parameter ◽  
Laplace Transform Technique ◽  
The Laplace Transform ◽  
Temperature And Velocity Fields

A comparative analysis is carried out to study the unsteady flow of a Maxwell fluid in the presence of Newtonian heating near a vertical flat plate. The fractional derivatives presented by Caputo and Caputo–Fabrizio are applied to make a physical model for a Maxwell fluid. Exact solutions of the non-dimensional temperature and velocity fields for Caputo and Caputo–Fabrizio time-fractional derivatives are determined via the Laplace transform technique. Numerical solutions of partial differential equations are obtained by employing Tzou’s and Stehfest’s algorithms to compare the results of both models. Exact solutions with integer-order derivative (fractional parameter α = 1) are also obtained for both temperature and velocity distributions as a special case. A graphical illustration is made to discuss the effect of Prandtl number Pr and time t on the temperature field. Similarly, the effects of Maxwell fluid parameter λ and other flow parameters on the velocity field are presented graphically, as well as in tabular form.

scholarly journals Influence of Thermal Radiation on Unsteady MHD Free Convection Flow of Jeffrey Fluid over a Vertical Plate with Ramped Wall Temperature

2016 ◽  
Vol 2016 ◽  
pp. 1-12 ◽  
Author(s):  
Nor Athirah Mohd Zin ◽  
Ilyas Khan ◽  
Sharidan Shafie
Keyword(s):  
Free Convection ◽  
Thermal Radiation ◽  
Wall Temperature ◽  
Vertical Plate ◽  
Convection Flow ◽  
Jeffrey Fluid ◽  
Dimensionless Time ◽  
Free Convection Flow ◽  
Laplace Transform Technique ◽  
The Laplace Transform

Influence of thermal radiation on unsteady magnetohydrodynamic (MHD) free convection flow of Jeffrey fluid over a vertical plate with ramped wall temperature is studied. The Laplace transform technique is used to obtain the analytical solutions. Expressions for skin friction and Nusselt number are also obtained. Results of velocity and temperature distributions are shown graphically for embedded parameters such as Jeffrey fluid parameterλ, Prandtl numberPr, Grashof numberGr, Hartmann numberHa, radiation parameterRd, and dimensionless timeτ. It is observed that the amplitude of velocity and temperature profile for isothermal are always higher than ramped wall temperature.

scholarly journals Application of water based drilling clay-nanoparticles in heat transfer of fractional Maxwell fluid over an infinite flat surface

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Imran Asjad ◽  
Rizwan Ali ◽  
Azhar Iqbal ◽  
Taseer Muhammad ◽  
Yu-Ming Chu
Keyword(s):  
Maxwell Fluid ◽  
Engine Oil ◽  
Convection Flow ◽  
The Novel ◽  
Governing Equations ◽  
Clay Nanoparticles ◽  
Integer Order ◽  
Flow Parameters ◽  
Laplace Transform Technique ◽  
The Impact

AbstractIn the present paper, unsteady free convection flow of Maxwell fluid containing clay-nanoparticles is investigated. These particles are hanging in water, engine oil and kerosene. The values for nanofluids based on the Maxwell-Garnett and Brinkman models for effective thermal conductivity and viscosity are calculated numerically. The integer order governing equations are being extended to the novel non-integer order fractional derivative. Analytical solutions of temperature and velocity for Maxwell fluid are build using Laplace transform technique and expressed in such a way that they clearly satisfied the boundary conditions. To see the impact of different flow parameters on the velocity, we have drawn some graphs. As a result, we have seen that the fractional model is superior in narrate the decay property of field variables. Some limiting solutions are obtained and compared with the latest existing literature. Moreover, significant results can be observed for clay nanoparticles with different base fluids.

scholarly journals Analytical Solutions of Upper Convected Maxwell Fluid with Exponential Dependence of Viscosity under the Influence of Pressure

Mathematics ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 334
Author(s):  
Constantin Fetecau ◽  
Dumitru Vieru ◽  
Tehseen Abbas ◽  
Rahmat Ellahi
Keyword(s):  
Fluid Motion ◽  
Maxwell Fluid ◽  
Newtonian Fluids ◽  
Exponential Dependence ◽  
Physical Parameters ◽  
Shear Stresses ◽  
Parallel Plates ◽  
Pressure Dependent Viscosity ◽  
Laplace Transform Technique ◽  
Dependent Viscosity

Some unsteady motions of incompressible upper-convected Maxwell (UCM) fluids with exponential dependence of viscosity on the pressure are analytically studied. The fluid motion between two infinite horizontal parallel plates is generated by the lower plate, which applies time-dependent shear stresses to the fluid. Exact expressions, in terms of standard Bessel functions, are established both for the dimensionless velocity fields and the corresponding non-trivial shear stresses using the Laplace transform technique and suitable changes of the unknown function and the spatial variable in the transform domain. They represent the first exact solutions for unsteady motions of non-Newtonian fluids with pressure-dependent viscosity. The similar solutions corresponding to the flow of the same fluids due to an exponential shear stress on the boundary as well as the solutions of ordinary UCM fluids performing the same motions are obtained as limiting cases of present results. Furthermore, known solutions for unsteady motions of the incompressible Newtonian fluids with/without pressure-dependent viscosity induced by oscillatory or constant shear stresses on the boundary are also obtained as limiting cases. Finally, the influence of physical parameters on the fluid motion is graphically illustrated and discussed. It is found that fluids with pressure-dependent viscosity flow are slower when compared to ordinary fluids.

scholarly journals A global analysis of the atmospheric pollutant modeling

2007 ◽  
Vol 22 (1) ◽  
pp. 1-9
Author(s):  
Umberto Rizza ◽  
Jonas C. Carvalho ◽  
Davidson M. Moreira ◽  
Marcelo R. Moraes ◽  
Antônio G. Goulart
Keyword(s):  
Global Analysis ◽  
Turbulent Transport ◽  
Three Dimensional ◽  
Ground Level ◽  
Lagrangian Model ◽  
Linear Superposition ◽  
Atmospheric Pollutant ◽  
Advection Diffusion Equation ◽  
Laplace Transform Technique ◽  
The Laplace Transform

In this article is carried out a comparison between Lagrangian and Eulerian modelling of the turbulent transport of pollutants within the Planetary Boundary Layer (PBL). The Lagrangian model is based on a three-dimensional form of the Langevin equation for the random velocity. The Eulerian analytical model is based on a discretization of the PBL in N sub-layers; in each of the sub-layers the advection-diffusion equation is solved by the Laplace transform technique. In the Eulerian numerical model the advective terms are solved using the cubic spline method while a Crank-Nicholson scheme is used for the diffusive terms. The models use a turbulence parameterization that considers a spectrum model, which is given by a linear superposition of the buoyancy and mechanical effects. Observed ground-level concentrations measured in a dispersion field experiment are used to evaluate the simulations.

scholarly journals Heat Transfer Analysis for Viscous Fluid Flow with the Newtonian Heating and Effect of Magnetic Force in a Rotating Regime

Complexity ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Rashid Ayub ◽  
Shahzad Ahmad ◽  
Muhammad Imran Asjad ◽  
Mushtaq Ahmad
Keyword(s):  
Viscous Fluid ◽  
Fluid Motion ◽  
Velocity Fields ◽  
Heat Transfer Analysis ◽  
Convection Flow ◽  
Newtonian Heating ◽  
Flow Parameters ◽  
Laplace Transform Technique ◽  
The Laplace Transform ◽  
Temperature And Velocity Fields

In this article, an unsteady free convection flow of MHD viscous fluid over a vertical rotating plate with Newtonian heating and heat generation is analyzed. The dimensionless governing equations for temperature and velocity fields are solved using the Laplace transform technique. Analytical solutions are obtained for the temperature and components of velocity fields. The obtained solutions satisfy the initial and boundary conditions. Some physical aspects of flow parameters on the fluid motion are presented graphically.

scholarly journals Convergence of the uniaxial PML method for time-domain electromagnetic scattering problems

2021 ◽  
Author(s):  
Changkun Wei ◽  
Jiaqing Yang ◽  
Bo Zhang
Keyword(s):  
Time Domain ◽  
Electromagnetic Scattering ◽  
Scattering Problem ◽  
Three Dimensional ◽  
Scattering Problems ◽  
Laplace Transform Technique ◽  
The Laplace Transform ◽  
Time Domain Electromagnetic ◽  
Numer Anal ◽  
The Time Domain

In this paper, we propose and study the uniaxial perfectly matched layer (PML) method for three-dimensional time-domain electromagnetic scattering problems, which has a great advantage over the spherical one in dealing with problems involving anisotropic scatterers. The truncated uniaxial PML problem is proved to be well-posed and stable, based on the Laplace transform technique and the energy method. Moreover, the $L^2$-norm and $L^{\infty}$-norm error estimates in time are given between the solutions of the original scattering problem and the truncated PML problem, leading to the exponential convergence of the time-domain uniaxial PML method in terms of the thickness and absorbing parameters of the PML layer. The proof depends on the error analysis between the EtM operators for the original scattering problem and the truncated PML problem, which is different from our previous work (SIAM J. Numer. Anal. 58(3) (2020), 1918-1940).

Sign in / Sign up

Export Citation Format

Share Document