scholarly journals Design and analysis of a six degrees of freedom serial–parallel robotic mechanism with multi-degree of freedom legs

2018 ◽  
Vol 15 (6) ◽  
pp. 172988141881264
Author(s):  
Ziwei Zhang ◽  
Guoying Meng
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Simple Structure ◽  
Parallel Mechanisms ◽  
Universal Joint ◽  
Six Degrees Of Freedom ◽  
In Series ◽  
Peristaltic Movement ◽  
High Flexibility ◽  
Analytic Models

A novel mobile serial–parallel mechanism with legs for in-pipe use is proposed. The mobile robotic mechanism is composed of two identical three-universal joint–prismatic joint–universal joint parallel mechanisms connected in series and two gripping modules. The proposed parallel mechanism has two rotational freedoms and one translational freedom. In addition, the parallel mechanism can achieve continuous and equivalent rotation. The singularities of the parallel mechanism are analyzed. The overall serial–parallel mechanism has six degrees of freedom, and each gripping module has four degrees of freedom. Each parallel mechanism in the waist module is driven by three servo-electric cylinders and each leg mechanism in the gripping modules is controlled by a linear actuator. The robotic mechanism can perform peristaltic movement and turning in space. The robotic mechanism possesses a simple structure and high flexibility, along with the merits of serial–parallel mechanism. In this article, analytic models for the kinematics and dynamics of the robotic mechanism are derived. Additionally, numerical examples are given, and their solutions are validated based on results obtained by SimMechanics and Adams.

scholarly journals Reconfiguration Analysis of a 3-DOF Parallel Mechanism

Robotics ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 66
Author(s):  
Maurizio Ruggiu ◽  
Xianwen Kong
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Operation Mode ◽  
Parallel Mechanisms ◽  
Universal Joint ◽  
Kinematic Chains ◽  
Constraint Equations ◽  
The Third ◽  
Equilateral Triangles ◽  
Moving Platform

This paper deals with the reconfiguration analysis of a 3-DOF (degrees-of-freedom) parallel manipulator (PM) which belongs to the cylindrical parallel mechanisms family. The PM is composed of a base and a moving platform shaped as equilateral triangles connected by three serial kinematic chains (legs). Two legs are composed of two universal (U) joints connected by a prismatic (P) joint. The third leg is composed of a revolute (R) joint connected to the base, a prismatic joint and universal joint in sequence. A set of constraint equations of the 1-RPU−2-UPU PM is derived and solved in terms of the Euler parameter quaternion (a.k.a. Euler-Rodrigues quaternion) representing the orientation of the moving platform and of the Cartesian coordinates of the reference point on the moving platform. It is found that the PM may undergo either the 3-DOF PPR or the 3-DOF planar operation mode only when the base and the moving platform are identical. The transition configuration between the operation modes is also identified.

Motion/Force Transmission Analysis of Parallel Mechanisms With Planar Closed-Loop Subchains

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
Kristan Marlow ◽  
Mats Isaksson ◽  
Jian S. Dai ◽  
Saeid Nahavandi
Keyword(s):  
Performance Measures ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Closed Loop ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Force Transmission ◽  
Six Degrees Of Freedom ◽  
Lower Mobility ◽  
Transmission Ability

Singularities are one of the most important issues affecting the performance of parallel mechanisms. A parallel mechanism with less than six degrees of freedom (6DOF) is classed as having lower mobility. In addition to input–output singularities, such mechanisms potentially suffer from singularities among their constraints. Furthermore, the utilization of closed-loop subchains (CLSCs) may introduce additional singularities, which can strongly affect the motion/force transmission ability of the entire mechanism. In this paper, we propose a technique for the analysis of singularities occurring within planar CLSCs, along with a finite, dimensionless, frame invariant index, based on screw theory, for examining the closeness to these singularities. The integration of the proposed index with existing performance measures is discussed in detail and exemplified on a prototype industrial parallel mechanism.

Singularity Analysis of Large Workspace 3RRRS Parallel Mechanism Using Line Geometry and Linear Complex Approximation

2010 ◽  
Vol 3 (1) ◽  
Author(s):  
Alon Wolf ◽  
Daniel Glozman
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Community Research ◽  
Parallel Mechanisms ◽  
Line Geometry ◽  
Equilibrium Equations ◽  
Six Degrees Of Freedom ◽  
Singular Configurations

During the last 15 years, parallel mechanisms (robots) have become more and more popular among the robotics and mechanism community. Research done in this field revealed the significant advantage of these mechanisms for several specific tasks, such as those that require high rigidity, low inertia of the mechanism, and/or high accuracy. Consequently, parallel mechanisms have been widely investigated in the last few years. There are tens of proposed structures for parallel mechanisms, with some capable of six degrees of freedom and some less (normally three degrees of freedom). One of the major drawbacks of parallel mechanisms is their relatively limited workspace and their behavior near or at singular configurations. In this paper, we analyze the kinematics of a new architecture for a six degrees of freedom parallel mechanism composed of three identical kinematic limbs: revolute-revolute-revolute-spherical. We solve the inverse and show the forward kinematics of the mechanism and then use the screw theory to develop the Jacobian matrix of the manipulator. We demonstrate how to use screw and line geometry tools for the singularity analysis of the mechanism. Both Jacobian matrices developed by using screw theory and static equilibrium equations are similar. Forward and inverse kinematic solutions are given and solved, and the singularity map of the mechanism was generated. We then demonstrate and analyze three representative singular configurations of the mechanism. Finally, we generate the singularity-free workspace of the mechanism.

Workspace Analysis of a Novel Six-Degrees-of-Freedom Parallel Manipulator With Coaxial Actuated Arms

2013 ◽  
Vol 135 (10) ◽  
Author(s):  
Mats Isaksson ◽  
Matthew Watson
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Limited Range ◽  
Parallel Mechanisms ◽  
Six Degrees Of Freedom ◽  
Serial Robots ◽  
High Acceleration ◽  
Redundantly Actuated

Parallel manipulators possess several advantages compared to serial robots, including the possibilities for high acceleration and high accuracy positioning of the manipulated platform. However, the majority of all proposed parallel mechanisms suffer from the combined drawbacks of a small positional workspace in relation to the manipulator footprint and a limited range of rotations of the manipulated platform. This paper analyses a recently proposed six-degrees-of-freedom parallel mechanism that aims to address both these issues while maintaining the traditional advantages of a parallel mechanism. The investigated manipulator consists of six actuated coaxial upper arms that are allowed to rotate indefinitely around a central cylindrical base column and a manipulated platform where five of the six joint positions are collinear. The axis-symmetric arm system leads to an extensive positional workspace while the proposed link arrangement increases the range of achievable platform rotations. The manipulator workspace is analyzed in detail and two methods to further increase the rotational workspace are presented. It is shown that the proposed manipulator has the possibility of a nonsingular transition of assembly modes, which extends the usable workspace. Furthermore, it is demonstrated how an additional kinematic chain can be utilized to achieve infinite platform rotation around one platform axis. By introducing additional mobility in the manipulated platform, a redundantly actuated mechanism is avoided.

Stiffness analysis of cable-driven parallel mechanisms with cables having large sustainable strains

2020 ◽  
Vol 234 (10) ◽  
pp. 1959-1968
Author(s):  
Hao Xiong ◽  
Xiumin Diao
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Sufficient Condition ◽  
Parallel Mechanisms ◽  
Stiffness Analysis ◽  
Six Degrees Of Freedom ◽  
Stiffness Matrices ◽  
Steel Cables ◽  
Isoprene Rubber

A cable-driven parallel mechanism is driven by a group of cables. Cable-driven parallel mechanisms can use various cables (e.g. steel cables, nylon cables, isoprene rubber cables, and extension springs) with different sustainable strains. This paper studies the stiffness of cable-driven parallel mechanisms with cables having large sustainable strains, aiming to achieve significantly adjustable overall stiffness. The overall stiffness of a cable-driven parallel mechanism can be decomposed into the constant base stiffness and the adjustable strain stiffness. This paper proposes and mathematically proves a theorem that guarantees that the overall stiffness of a cable-driven parallel mechanism at an arbitrary stable pose can be dominated by the adjustable strain stiffness when cable strains are larger than 100%. The theorem employs the minimum eigenvalues of stiffness matrices to characterize the stiffness of cable-driven parallel mechanism. The theorem provides a sufficient condition that guarantees that the overall stiffness of a cable-driven parallel mechanism at an arbitrary stable pose can be significantly adjusted (i.e. the adjustable strain stiffness contributes more than the constant base stiffness in determining the overall stiffness). The theorem is verified through the simulation of a cable-driven parallel mechanism with six degrees of freedom and seven cables.

scholarly journals Optimum Seeking of Redundant Actuators for M-RCM 3-UPU Parallel Mechanism

2020 ◽  
Author(s):  
Chen Zhao ◽  
Jingke Song ◽  
Xuechan Chen ◽  
Ziming Chen ◽  
Huafeng Ding
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Singularity Analysis ◽  
Universal Joint ◽  
Prismatic Joint ◽  
Transmission Index ◽  
Redundant Actuators ◽  
Force Transmissibility ◽  
Singular Configuration

Abstract This paper focuses on a 2R1T 3-UPU (U for universal joint and P for prismatic joint) parallel mechanism (PM) with two rotational and one translational (2R1T) degrees of freedom (DOFs) and the ability of multiple remote centers of motion (M-RCM). The singularity analysis based on the indexes of motion/force transmissibility and constraint shows that this PM has transmission singularity, constraint singularity, mixed singularity and limb singularity. To solve these singularproblems, the quantifiable redundancy transmission index (RTI) and the redundancy constraint index (RCI) are proposed for optimum seeking of redundant actuators for this PM. Then the appropriate redundant actuators are selected and the working scheme for redundant actuators near the corresponding singular configuration are given to help the PM go through the singularity.

Design of a Four Legged Parallel Mechanism to Improve the Dexterity of Walking Robot

2009 ◽  
Author(s):  
ChiHyo Kim ◽  
KunWoo Park ◽  
TaeSung Kim ◽  
MinKi Lee
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Topology Design ◽  
Condition Numbers ◽  
Walking Robots ◽  
Rough Terrain ◽  
Parallel Mechanisms ◽  
Walking Robot ◽  
Intermediate Mechanism

This paper designs a four legged parallel mechanism to improve the dexterity of three layered parallel walking robot. Topology design is conducted for a leg mechanism composed of four legs, base and ground, which constitute a redundant parallel mechanism. This mechanism is subdivided into four sub-mechanism composed of three legs. A motor vector is adopted to determine the 6×8 Jacobian of the redundant parallel mechanism and the 6×6 Jacobian of the sub-mechanisms, respectively. The condition number of the Jacobian matrix is used as an index to measure a dexterity. We analyze the condition numbers of the Jacobian over the positional and orientational walking space. The analytical results show that a sub-mechanism has lots of singularities within workspace but they are removed by a redundant parallel mechanism improving the dexterity. This paper presents a parallel typed walking robot to enlarge walking space and stability region. Seven types of three layered walking robots are designed by inserting an intermediate mechanism between the upper and the lower legged parallel mechanisms. They provide various types of gaits to walk rough terrain and climb over a wall with small degrees of freedom.

Kinematics and Workspace Analysis of 3-RPP Parallel Mechanism

2013 ◽  
Vol 456 ◽  
pp. 146-150
Author(s):  
Zhi Jiang Xie ◽  
Jun Zhang ◽  
Xiao Bo Liu
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Parallel Mechanisms ◽  
Vector Method ◽  
Workspace Analysis ◽  
Inverse Solutions ◽  
Three Degrees Of Freedom

This paper designed a kind of parallel mechanism with three degrees of freedom, the freedom and movement types of the robot are analyzed in detail, the parallel mechanisms Kinematics positive and inverse solutions are derived through using the vector method. And at last its workspace is analyzed and studied systematically.

Redundant Parallel Mechanism for Haptic Applications

2010 ◽  
Vol 4 (4) ◽  
pp. 338-345 ◽  
Author(s):  
Jumpei Arata ◽  
◽  
Hideo Fujimoto
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Display Device ◽  
Parallel Mechanisms ◽  
Prototype Implementation ◽  
Haptic Devices ◽  
Multiple Degrees Of Freedom ◽  
High Rigidity ◽  
Wide Range ◽  
Fixed Base

With haptic devices becoming increasingly common in both industrial field and consumer use, parallel mechanisms have been widely introduced for their high rigidity, output, accuracy and high backdrivability due to their multi-legged structure and fixed base actuators. In general parallel mechanism, redundancy enlarges the working area and avoids singularity. The redundant parallel mechanism we present introduces these advantages into haptic applications. Introducing this mechanism into a multiple degrees-of-freedom (DOF) structure realizes a wide range of working areas in rotation. The redundant parallel mechanism implemented in translational force display device, and multi-DOF force display device demonstrate the advantages of the redundant parallel mechanism in haptic applications. Following an overview, we introduce the prototype implementation and evaluation of these devices and discuss the effectiveness of the redundant parallel mechanism in haptic applications.

Sign in / Sign up

Export Citation Format

Share Document