Implementation and Evaluation of a Three-Legged Six-Degrees-of-Freedom Parallel Mechanism as an Impedance-Type Haptic Device

2017 ◽  
Vol 22 (3) ◽  
pp. 1412-1422 ◽  
Author(s):  
Sajeeva Abeywardena ◽  
Chao Chen
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Haptic Device ◽  
Six Degrees Of Freedom

Design of a Novel Parallel Mechanism for Haptic Device

2021 ◽  
pp. 1-63
Author(s):  
Jin Lixing ◽  
Duan Xingguang ◽  
Li Changsheng ◽  
Shi Qingxin ◽  
Wen Hao ◽  
...  
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Force Feedback ◽  
Parallel Architecture ◽  
General Purpose ◽  
Haptic Device ◽  
Haptic Devices ◽  
Modeling And Optimization ◽  
Teleoperation Systems

Abstract This paper presents a novel parallel architecture with seven active degrees of freedom (DOFs) for general-purpose haptic devices. The prime features of the proposed mechanism are partial decoupling, large dexterous working area, and fixed actuators. The detailed processes of design, modeling, and optimization are introduced and the performance is simulated. After that, a mechanical prototype is fabricated and tested. Results of the simulations and experiments reveal that the proposed mechanism possesses excellent performances on motion flexibility and force feedback. This paper aims to provide a remarkable solution of the general-purpose haptic device for teleoperation systems with uncertain mission in complex applications.

Use of 1DOF Haptic Device for Remote-Controlled 6DOF Assembly

2014 ◽  
Vol 8 (3) ◽  
pp. 452-459 ◽  
Author(s):  
Ryoya Kamata ◽  
◽  
Ryosuke Tamura ◽  
Satoshi Niitsu ◽  
Hiroshi Kawaharada ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Force Feedback ◽  
Haptic Device ◽  
Prototype System ◽  
Assembly Operation ◽  
Six Degrees Of Freedom ◽  
Controlled Assembly ◽  
Sense Of Reality ◽  
Position And Orientation ◽  
Assembly Operations

This paper describes a remote controlled assembly using a haptic device. Most haptic devices have six Degrees Of Freedom (DOFs) for a higher sense of reality. However, for assembly operation, the simultaneous motion of parts with only one or two DOFs is required, and force feedback to operators is used only to maintain contact and detect collisions among parts. This leads to the possibility of assembly operations using a haptic device with a small number of DOFs. In this paper, we propose virtual planes to perform remote control of a 6DOF assembly by way of 1DOF user operations. Virtual planes separate the DOFs for user operation and for automatically generated motions that complement the user operation DOF in each assembly operation. A prototype system was developed with a 6DOF manipulator and camera. The system allows an operator to place virtual planes in any position and orientation using a camera image of the workspace. The experiment results showed the effectiveness of the method for remote controlled assembly without geometry information on the parts.

Kinematics of the Translational 3-URC Mechanism1

2004 ◽  
Vol 126 (6) ◽  
pp. 1113-1117 ◽  
Author(s):  
Raffaele Di Gregorio
Keyword(s):  
Explicit Form ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Industrial Applications ◽  
Parallel Architectures ◽  
Six Degrees Of Freedom ◽  
Spatial Mechanisms ◽  
Six Dof ◽  
And Control ◽  
Spherical Motion

The use of less than six degrees of freedom (dof) mechanisms instead of six-dof ones is always recommended when the application makes it possible, since their architectures and control are simpler to manufacture and implement respectively. Three-dof mechanisms constitute an important subset of less-than-six-dof mechanisms, since either translational or spherical motion can be obtained through three-dof spatial mechanisms and many industrial applications require the only translational or spherical motion. This paper presents a new translational parallel mechanism (TPM), named translational 3-URC. The new mechanism belongs to the parallel architectures with 3-URC topology, which contain another architecture that is a spherical parallel wrist. The proposed TPM is not overconstrained and has three equal legs whose kinematic pairs are three revolute pairs and one passive cylindrical pair per leg. Its actuated pairs are three revolute pair located on the frame. The position and velocity analyses of the translational 3-URC will be addressed and solved. Its singularity conditions will be written in explicit form and geometrically interpreted.

Motion/Force Transmission Analysis of Parallel Mechanisms With Planar Closed-Loop Subchains

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
Kristan Marlow ◽  
Mats Isaksson ◽  
Jian S. Dai ◽  
Saeid Nahavandi
Keyword(s):  
Performance Measures ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Closed Loop ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Force Transmission ◽  
Six Degrees Of Freedom ◽  
Lower Mobility ◽  
Transmission Ability

Singularities are one of the most important issues affecting the performance of parallel mechanisms. A parallel mechanism with less than six degrees of freedom (6DOF) is classed as having lower mobility. In addition to input–output singularities, such mechanisms potentially suffer from singularities among their constraints. Furthermore, the utilization of closed-loop subchains (CLSCs) may introduce additional singularities, which can strongly affect the motion/force transmission ability of the entire mechanism. In this paper, we propose a technique for the analysis of singularities occurring within planar CLSCs, along with a finite, dimensionless, frame invariant index, based on screw theory, for examining the closeness to these singularities. The integration of the proposed index with existing performance measures is discussed in detail and exemplified on a prototype industrial parallel mechanism.

scholarly journals Design and analysis of a six degrees of freedom serial–parallel robotic mechanism with multi-degree of freedom legs

2018 ◽  
Vol 15 (6) ◽  
pp. 172988141881264
Author(s):  
Ziwei Zhang ◽  
Guoying Meng
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Simple Structure ◽  
Parallel Mechanisms ◽  
Universal Joint ◽  
Six Degrees Of Freedom ◽  
In Series ◽  
Peristaltic Movement ◽  
High Flexibility ◽  
Analytic Models

A novel mobile serial–parallel mechanism with legs for in-pipe use is proposed. The mobile robotic mechanism is composed of two identical three-universal joint–prismatic joint–universal joint parallel mechanisms connected in series and two gripping modules. The proposed parallel mechanism has two rotational freedoms and one translational freedom. In addition, the parallel mechanism can achieve continuous and equivalent rotation. The singularities of the parallel mechanism are analyzed. The overall serial–parallel mechanism has six degrees of freedom, and each gripping module has four degrees of freedom. Each parallel mechanism in the waist module is driven by three servo-electric cylinders and each leg mechanism in the gripping modules is controlled by a linear actuator. The robotic mechanism can perform peristaltic movement and turning in space. The robotic mechanism possesses a simple structure and high flexibility, along with the merits of serial–parallel mechanism. In this article, analytic models for the kinematics and dynamics of the robotic mechanism are derived. Additionally, numerical examples are given, and their solutions are validated based on results obtained by SimMechanics and Adams.

A Screw Theory-Based Semi-Analytical Approach for Elastodynamics of the Tricept Robot

2019 ◽  
Vol 11 (3) ◽  
Author(s):  
Chenglin Dong ◽  
Haitao Liu ◽  
Tian Huang ◽  
Derek G. Chetwynd
Keyword(s):  
Lower Order ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Analytical Approach ◽  
Screw Theory ◽  
Mode Shapes ◽  
Fe Model ◽  
Six Degrees Of Freedom ◽  
Static Condensation ◽  
Elastodynamic Modeling

Taking the well-known Tricept robot as an example, this paper presents a semi-analytical approach for elastodynamic modeling of five or six degrees of freedom (DOF) hybrid robots composed of a 3-DOF parallel mechanism plus a 2- or 3-DOF wrist. Drawing heavily on screw theory combined with structural dynamics, the kinetic and elastic potential energies of the parallel mechanism and of the wrist are formulated using the dual properties of twist/wrench systems and a static condensation technique. This results in a 9-DOF dynamic model that enables the lower-order dynamic behavior over the entire workspace to be estimated in a very efficient and accurate manner. The lower-order natural frequencies and mode shapes estimated by the proposed approach are shown to have very good agreement with those obtained by a full-order finite element (FE) model. It thus provides a very time-effective tool for optimal design within a virtual prototyping framework for hybrid robot-based machine tools.

Singularity Analysis of Large Workspace 3RRRS Parallel Mechanism Using Line Geometry and Linear Complex Approximation

2010 ◽  
Vol 3 (1) ◽  
Author(s):  
Alon Wolf ◽  
Daniel Glozman
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Community Research ◽  
Parallel Mechanisms ◽  
Line Geometry ◽  
Equilibrium Equations ◽  
Six Degrees Of Freedom ◽  
Singular Configurations

During the last 15 years, parallel mechanisms (robots) have become more and more popular among the robotics and mechanism community. Research done in this field revealed the significant advantage of these mechanisms for several specific tasks, such as those that require high rigidity, low inertia of the mechanism, and/or high accuracy. Consequently, parallel mechanisms have been widely investigated in the last few years. There are tens of proposed structures for parallel mechanisms, with some capable of six degrees of freedom and some less (normally three degrees of freedom). One of the major drawbacks of parallel mechanisms is their relatively limited workspace and their behavior near or at singular configurations. In this paper, we analyze the kinematics of a new architecture for a six degrees of freedom parallel mechanism composed of three identical kinematic limbs: revolute-revolute-revolute-spherical. We solve the inverse and show the forward kinematics of the mechanism and then use the screw theory to develop the Jacobian matrix of the manipulator. We demonstrate how to use screw and line geometry tools for the singularity analysis of the mechanism. Both Jacobian matrices developed by using screw theory and static equilibrium equations are similar. Forward and inverse kinematic solutions are given and solved, and the singularity map of the mechanism was generated. We then demonstrate and analyze three representative singular configurations of the mechanism. Finally, we generate the singularity-free workspace of the mechanism.

Sign in / Sign up

Export Citation Format

Share Document