scholarly journals The effect of movement variability on putting proficiency during the golf putting stroke

2018 ◽  
Vol 13 (4) ◽  
pp. 590-597 ◽  
Author(s):  
Ashley K Richardson ◽  
Andrew CS Mitchell ◽  
Gerwyn Hughes
Keyword(s):  
Three Dimensional ◽  
Movement Variability ◽  
Significant Relationships ◽  
Performance Variability ◽  
Ellipsoid Volume ◽  
Analysis System ◽  
Kinematic Measures ◽  
Movement Segment ◽  
Launch Angle ◽  
Golf Putt

Movement variability has been considered important to execute an effective golf swing yet is comparatively unexplored regarding the golf putt. Movement variability could potentially be important considering the small margins of error between a successful and a missed putt. The aim of this study was to assess whether variability of body segment rotations influence putting performance (ball kinematic measures). Eight golfers (handicap range 0–10) performed a 3.2 m level putt wearing retro-reflective markers which were tracked using a three-dimensional motion analysis system sampling at 120 Hz. Ball roll kinematics were recorded using Quintic Ball Roll launch monitor. Movement (segment) variability was calculated based on a scalene ellipsoid volume concept and correlated with the coefficient of variation of ball kinematics. Statistical analysis showed no significant relationships between segment variability and putting proficiency. One significant relationship was identified between left forearm variability and horizontal launch angle, but this did not result in deficits in putting success. Results show that performance variability in the backswing and downswing is not related to putting proficiency or the majority of ball roll measures. Differing strategies may exist where certain golfers may have more fluid movement patterns thereby effectively utilising variability of movement. Therefore, golf instructors should consider movement variability when coaching the golf putt.

scholarly journals Maneuverability of the Scope and Instruments within Three Different Single-Incision Laparoscopic Ports: An Experimental Pilot Study

Animals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1242
Author(s):  
Georg Haider ◽  
Ursula Schulz ◽  
Nikola Katic ◽  
Christian Peham ◽  
Gilles Dupré
Keyword(s):  
Motion Analysis ◽  
Single Incision ◽  
Single Port ◽  
Three Dimensional ◽  
Analysis Software ◽  
Port Access ◽  
Port System ◽  
Sils Port ◽  
Glove Port ◽  
Analysis System

Single-port access systems (SPASs) are currently used in human and veterinary surgeries. However, they pose technical challenges, such as instrument crowding, intra- and extracorporeal instrument collision, and reduced maneuverability. Studies comparing the maneuverability of the scopes and instruments in different SPASs are lacking. This study aimed to compare the maneuverability of three different SPASs: the Covidien SILS-port, Storz Endocone, and glove port. A clear acrylic box with artificial skin placed at the bottom was used to mimic the abdominal wall and cavity. The three SPASs were placed from below, and a 10-mm endoscope and 5-mm instrument were introduced. A motion analysis system consisting of 18 cameras and motion analysis software were used to track the movement of the endoscope and instrument, to determine the volume of the cone-shaped, three-dimensional figures over which movement was possible, with higher values indicating greater maneuverability. The Mann–Whitney U test was used for the analysis. The maneuverability of the endoscope alone was significantly higher in the glove port system than in the other two SPASs. When inserting an additional instrument, the maneuverability significantly decreased in the SILS-port and Endocone, but not in the glove port. The highest maneuverability overall was found in the glove port.

ELEMENT-FREE METHODS VS. MESH-LESS CAE

2006 ◽  
Vol 03 (04) ◽  
pp. 445-464 ◽  
Author(s):  
HIDEYUKI SAKURAI
Keyword(s):  
Mesh Generation ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Generation Task ◽  
3D Objects ◽  
Computer Aided ◽  
Analysis System ◽  
Mesh Less ◽  
Element Free ◽  
Cae System

Element-free methods (EFreeMs) are expected to eliminate the mesh generation task. However, a computer aided engineering (CAE) system by EFreeM for complex three-dimensional (3D) objects has not yet been developed. This paper discusses the obstacles to the CAE and way to solve them. A 3D groundwater flow analysis system with an EFreeM is presented as a practical CAE. In the system, instead of pursuing mesh-less CAE, a unique mesh is employed to achieve the practical CAE. Some 3D examples show the performance and usefulness of the system. Two serious drawbacks of the EFreeM are also discussed from the viewpoint of the practical CAE.

Development and Application of Graphics Displays for a Mini-Computer Based Vibration Analysis System

1992 ◽  
Author(s):  
Bill Trevillion
Keyword(s):  
Three Dimensional ◽  
Large Data ◽  
Electric Utility ◽  
Chemical Processing ◽  
Acoustic Data ◽  
Interactive Display ◽  
Computer Based ◽  
Data Files ◽  
Vibration Problems ◽  
Analysis System

Abstract Radian Corporation has developed extensive data display capabilities to analyze vibration and acoustic data from structures and rotating equipment. The Machinery Interactive Display and Analysis System (MIDAS) displays data collected through the acquisition functions of MIDAS. The graphics capabilities include displaying spectra in three-dimensional waterfall and in X-Y formats. Both types of plots can relate vibrations to time, equipment speed, or process parameters. Using menu-driven parameter selection, data can be displayed in formats that are the most useful for analysis. The system runs on a popular mini-computer, and it can be used with a great variety of graphics terminals, workstations, and printer/plotters. The software was designed and written for interactive display and plotting. Automatic plotting of large data files is facilitated by a batch plotting mode. The user can define display formats for the analysis of noise and vibration problems in the electric utility, chemical processing, paper, and automotive industries. This paper describes the history and development of graphics capabilities of the MIDAS system. The system, as illustrated in the examples, has proven efficient and economical for displaying large quantities of data.

Initial Ball Flight Characteristics of Curve and Instep Kicks in Elite Women’s Football

2012 ◽  
Vol 28 (1) ◽  
pp. 70-77 ◽  
Author(s):  
Alison Alcock ◽  
Wendy Gilleard ◽  
Nick A.T. Brown ◽  
John Baker ◽  
Adam Hunter
Keyword(s):  
Regression Models ◽  
Three Dimensional ◽  
Spin Axis ◽  
Vertical Coordinate ◽  
Ball Flight ◽  
Launch Angle ◽  
Target Center ◽  
Women's Football

Initial ball flight characteristics of curve and instep kicks were investigated. Fifteen international female footballers performed curve and instep kicks from a distance of 20 m from goal and at a 1 m2 target. Seventeen Vicon cameras tracked three-dimensional coordinates of four reflective markers adhered to the ball. Ball flight characteristics were quantified, and the coordinates of the ball relative to the target center were recorded. The lateral launch angle and the angle of the spin axis relative to the horizontal best predicted the horizontal placement of the ball relative to the target. The vertical launch angle, antero-posterior velocity and amount of backspin best predicted the vertical coordinate. Regression models demonstrated how carefully controlled the flight characteristics must be with launch angles constrained within 3° to hit the target. Curve kicks were characterized by significantly greater lateral and vertical launch angles, increased sidespin and spin about the antero-posterior axis, and a more vertical spin axis. This information is beneficial for coaches in training players to achieve the characteristics required to score a goal and avoid a defensive wall. For example, if players consistently kick above or below the target, these findings identify the variables that will help rectify that error.

scholarly journals Energy Absorption Strategies in the Lower Extremities during Double-Leg Landings in Knee Valgus Alignment

2020 ◽  
Vol 10 (23) ◽  
pp. 8742
Author(s):  
Akihiro Tamura ◽  
Kiyokazu Akasaka ◽  
Takahiro Otsudo
Keyword(s):  
Energy Absorption ◽  
Mechanical Load ◽  
Three Dimensional ◽  
Lower Extremities ◽  
Mechanical Work ◽  
Knee Valgus ◽  
Landing Position ◽  
Drop Jumps ◽  
Analysis System ◽  
Valgus Alignment

Landing with the knee in a valgus position may alter energy absorption strategies in the lower extremities and increase mechanical stress on the knee joint. We compared the energy absorption strategies in the lower extremities during valgus and varus landings. Seventeen females were divided into valgus and varus groups. Lower extremity kinetic data were obtained during drop jumps, using a three-dimensional motion analysis system. Negative mechanical work in the lower extremities were calculated during landing. The valgus group exhibited significantly more negative mechanical work at the knee, and less negative mechanical work at the hip, compared with the varus group. However, there was no difference in the negative mechanical work at the ankle between the two groups. Findings suggest that an increased valgus landing reduces the contribution of the hip to energy absorption and is associated with a reciprocal increased contribution by the knee. Hence a knee valgus landing position may be a key biomechanical factor that increases energy absorption in the knee, thereby increasing the risk of injury. Results further indicate that this can be prevented by adopting a knee varus position on landing, which facilitates absorption of the mechanical load at the hip, rather than at the knee.

scholarly journals Prognostic value of a three-dimensional dynamic quantitative analysis system to measure facial motion in acute facial paralysis patients

2020 ◽  
Vol 16 (1) ◽  
Author(s):  
Yang Zhao ◽  
Guodong Feng ◽  
Haiyan Wu ◽  
Surita Aodeng ◽  
Xu Tian ◽  
...  
Keyword(s):  
Quantitative Analysis ◽  
Facial Paralysis ◽  
Prognostic Value ◽  
Three Dimensional ◽  
Facial Motion ◽  
Analysis System

The relationship of hip rotation range, hip rotator strength and balance in healthy individuals

2020 ◽  
Vol 33 (5) ◽  
pp. 761-767
Author(s):  
Yongwook Kim ◽  
Seungmook Kang
Keyword(s):  
Motion Analysis ◽  
External Rotation ◽  
Dynamic Balance ◽  
Three Dimensional ◽  
Camera Motion ◽  
3D Motion ◽  
3D Motion Analysis ◽  
Balance Ability ◽  
Analysis System ◽  
The Relationship

BACKGROUND: Few studies have explored the relationship between muscle strength, range of motion (ROM), and balance in the horizontal plane of the hip joint using three-dimensional (3D) motion analysis. OBJECTIVE: We investigate the relationships of hip internal rotation (IR) and external rotation (ER) ROM, measured using a 3D motion capture system, with hip internal and external rotator strength and single-leg standing balance. METHODS: The participants were 40 healthy adults. Kinematic data on hip ROM were collected using an eight-camera motion analysis system. Hip rotational strength measurements were obtained using hand-held isometric dynamometry. A Single-leg standing test and a pendular test were conducted to evaluate static and dynamic balance ability using BioRescue. RESULTS: Significant correlations were found between hip strength and each variable measured during hip ROM assessments (p< 0.05). Significant positive correlations were found between the hip IR/ER strength ratio and the IR/ER ROM ratio (r= 0.72, p< 0.01). The subgroup with a normal IR/ER ratio of hip rotator strength and ROM showed significantly better dynamic balance ability than the subgroup with a hip rotator muscle imbalance (p< 0.05). CONCLUSIONS: There is a significant relationship between hip IR/ER strength and IR/ER ROM with a normal hip IR/ER strength and ROM ratio positively affecting dynamic balance ability.

Sign in / Sign up

Export Citation Format

Share Document