Theoretical analysis of SWCNT- MWCNT/H2O hybrid flow over an upward/downward moving rotating disk

2021 ◽  
pp. 239779142098028
Author(s):  
R.J. Punith Gowda ◽  
R. Naveenkumar ◽  
J.K. Madhukesh ◽  
B.C. Prasannakumara ◽  
Rama Subba Reddy Gorla
Keyword(s):  
Heterogeneous Reaction ◽  
Three Dimensional ◽  
Rotating Disk ◽  
Heterogeneous Reactions ◽  
Hybrid Nanofluid ◽  
Boundary Constraints ◽  
Wide Range ◽  
Contraction Parameter ◽  
Dimensional Parameters ◽  
Source Sink

The flow-through various disk movement has wide range of applications in manufacturing processes like, computer storage equipment’s, rotating machines, electronic and various types of medical equipment’s. Inspired from these applications, here we scrutinised the consequences of homogeneous-heterogeneous reactions and uniform heat source/sink on the three-dimensional (3D) hybrid SWCNT-MWCNT’s flow on time dependent moving upward/downward rotating disk. The renowned innovation of this paper is the application of the hybrid nanofluid made up of SWCNT and MWCNT’s. Heat generation/absorption effect for the disk that does not move up or down creates a dual flow on the disk. Alternatively, the rotation and upright motion of the disk creates a 3D flow on the surface which has not been considered in the open literature. The modelled PDE’s are reduced in to ODE’s by opting suitable similarity variables and boundary constraints. Here, we used RKF-45 method to obtain the numerical approximations by adopting shooting technique. The analysis of rate of heat transfer is done through graphs. Further, change in velocity, thermal and concentration profiles for various non-dimensional parameters are deliberated briefly and illustrated with the help of suitable plots. The results reveal that, the, rise in values of homogeneous and heterogeneous reaction parameters improve the rate of reaction which results in reduction of the distribution rate and diminishes the concentration gradient. An increase in expansion/contraction parameter enhances the velocity and thermal gradients.

Three-dimensional flow of radiative hybrid nanofluid past a permeable stretching/shrinking sheet with homogeneous-heterogeneous reaction

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Najiyah Safwa Khashi'ie ◽  
Norihan Md Arifin ◽  
Natalia C. Rosca ◽  
Alin V. Rosca ◽  
Ioan Pop
Keyword(s):  
Heterogeneous Reaction ◽  
Three Dimensional ◽  
Heterogeneous Reactions ◽  
Shrinking Sheet ◽  
Hybrid Nanofluid ◽  
Three Dimensional Flow ◽  
Suction Parameter ◽  
Content Type ◽  
Fluid Concentration ◽  
The Stability

Purpose The purpose of this paper is to study the effects of thermal radiation and homogeneous-heterogeneous reactions in the three-dimensional hybrid nanofluid flow past a permeable stretching/shrinking sheet. Design/methodology/approach The combination of aluminum oxide (Al2O3) and copper (Cu) nanoparticles with total volumetric concentration is numerically analyzed using the existing correlations of hybrid nanofluid. With the consideration that both homogeneous and heterogeneous reactions are isothermal while the diffusion coefficients of both autocatalyst and reactant are same, the governing model is simplified into a set of differential (similarity) equations. Findings Using the bvp4c solver, dual solutions are presented, and the stability analysis certifies the physical/real solution. The findings show that the suction parameter is requisite to induce the steady solution for shrinking parameter. Besides, the fluid concentration owing to the shrinking sheet is diminished with the addition of surface reaction. Originality/value The present findings are novel and can be a reference point to other researchers to further analyze the heat transfer performance and stability of the working fluids.

scholarly journals Heterogeneous reaction of HO<sub>2</sub> with airborne TiO<sub>2</sub> particles and its implication for climate change mitigation strategies

2017 ◽  
Author(s):  
Daniel R. Moon ◽  
Giorgio S. Taverna ◽  
Clara Anduix-Canto ◽  
Trevor Ingham ◽  
Martyn P. Chipperfield ◽  
...  
Keyword(s):  
Transport Model ◽  
Heterogeneous Reaction ◽  
Three Dimensional ◽  
Mitigation Strategies ◽  
Heterogeneous Reactions ◽  
Chemical Transport Model ◽  
Flow Tube ◽  
Tio2 Particles ◽  
The Impact ◽  
Change Mitigation

Abstract. One geoengineering mitigation strategy for global temperature rises resulting from the increased concentrations of greenhouse gases is to inject particles into the stratosphere to scatter solar radiation back to space, with TiO2 particles emerging as a possible candidate. Uptake coefficients of HO2, γ(HO2), onto sub-micrometre TiO2 particles were measured at room temperature and different relative humidities (RH) using an atmospheric pressure aerosol flow tube coupled to a sensitive HO2 detector. Values of γ(HO2) increased from 0.021 ± 0.001 to 0.036 ± 0.007 as the RH was increased from 11 % to 66 %, and the increase in γ(HO2) correlated with the number of monolayers of water surrounding the TiO2 particles. The impact of the uptake of HO2 onto TiO2 particles on stratospheric concentrations of HO2 and O3 was simulated using the TOMCAT three-dimensional chemical transport model. The model showed that by injecting the amount of TiO2 required to achieve the same cooling effect as the Mt. Pinatubo eruption, heterogeneous reactions between HO2 and TiO2 would have a negligible effect on stratospheric concentrations of HO2 and O3.

Conversaziones 1955

1956 ◽  
Vol 12 (1) ◽  
pp. 9-20
Keyword(s):  
Boundary Layer ◽  
Three Dimensional ◽  
Rotating Disk ◽  
National Physical Laboratory ◽  
Turbulent Fluctuations ◽  
Research Activities ◽  
Physical Laboratory ◽  
Wide Range ◽  
Dimensional Boundary ◽  
Swept Wings

Conversaziones were held on 19 May and 28 June 1955. At the first there were thirty-six exhibits, covering a wide range of research activities. An acoustical demonstration of the instability of the laminar boundary layer on a rotating disk was given by Mr N. Gregory, Mr J. T. Stuart and Mr W. S. Walker, of the Aerodynamics Division, National Physical Laboratory. The rotating disk illustrates a phenomenon which also occurs in the flow over the swept wings of modern aircraft, the instability in the latter case being due to the growth of self-amplifying vortices in the three-dimensional boundary layer over the nose of the wing. By using a stethoscope the vibrations produced by the vortices and by the random turbulent fluctuations at the edge of the disk can clearly be heard.

Development and Research of Mathematical Models of Deployment of Mobole Parts of Transformable Space Construction. Part I

2020 ◽  
Vol 21 (1) ◽  
pp. 51-64
Author(s):  
S. A. Kabanov ◽  
B. A. Zimin ◽  
F. V. Mitin
Keyword(s):  
Mathematical Models ◽  
Three Dimensional ◽  
Transition Process ◽  
Natural Oscillation ◽  
Lagrange Equations ◽  
Brushless Dc ◽  
Wide Range ◽  
Space Construction ◽  
Dimensional Parameters ◽  
The Impact

The process of deployment elements of constructions and adjustment of the radio-reflecting network of large-sized transformable space-based reflector with the use of a cable-stayed form maintenance system is considered. The deployment process can be broken down into separate phases. At each stage, the movement is due to the impact on the design of the actuator — the element of the control system. Energy for the deployment of the reflector elements is produced by drives, in particular an electric machine. The use of this type of actuator allows you to control the process of disclosure. Due to the fact that currently achieved a huge process in computer technology that allows you to perform three-dimensional computing operations in a short time, it is particularly important to use optimal control algorithms. When deployment the reflector for two types of motion — rotational and translational — mathematical models based on Lagrange equations of the II-kind are obtained. These mathematical models take into account such parameters as dissipation, the presence of longitudinal and transverse deformation. The models provide for the presence of a stop and a lock, as an Executive element in the deployment selected brushless DC motor. All the observations made allow us to formulate a smooth statement disclose items on the stop with minimum oscillation of the structure. The developed models allow to analyze the n-th number of natural oscillation frequencies. Modeling with different parameters of the model is carried out. The parameters of the transition process of the spoke at the opening of the first link with the other links embedded in it and at the fully covered spoke are analyzed. It is shown that depending on the mass-dimensional parameters there is a significant change in the dynamics. For the spoke extension stage, the weight and size characteristics have little effect on the opening dynamics. The smaller the Young’s modulus and density of the material, the greater the damped longitudinal oscillations.. The simulation of this stage with a spoke made of different materials is carried out. Various methods are proposed to reduce the opening time at all stages and minimize transverse and longitudinal oscillations. The possibility of application of the developed mathematical models for a wide range of tasks is shown.

scholarly journals Gravity-driven hydromagnetic flow of couple stress hybrid nanofluid with homogenous-heterogeneous reactions

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Waseem ◽  
Taza Gul ◽  
Imran Khan ◽  
Arshad Khan ◽  
Anwar Saeed ◽  
...  
Keyword(s):  
Couple Stress ◽  
Heterogeneous Reaction ◽  
Thermal Characteristics ◽  
Heterogeneous Reactions ◽  
Hybrid Nanofluid ◽  
Heated Plate ◽  
Hydromagnetic Flow ◽  
Gravity Driven ◽  
Autocatalytic Kinetics ◽  
The Impact

AbstractThis investigation describes the hydromagnetic flow of gravity-driven couple stress hybrid nanofluid past a heated plate. The carbon nanotubes (CNTs) are used to characterize the hybrid nanofluid. The heated plate is placed vertically with an application of homogenous-heterogeneous reactions to the assumed flow system. The homogeneous reaction governs by isothermal cubic autocatalytic kinetics while the heterogeneous reaction governs by the first order kinetics. For current study the couple stress hybrid nanofluid is presumed to be conducted electrically with impact of non-uniform magnetic effects. An appropriate set of dimensionless quantities has employed to governing equations and then has solved by homotopy analysis method. The influence of emerging parameters encountered in this work has discussed in detail with the help of graphs. In this study it has examined that, flow of fluid reduces with upsurge in magnetic parameter and volumetric concentrations, whereas thermal and concentration characteristics augment with increase in volumetric concentrations. Moreover, growth in Prandtl number leads to a reduction in thermal characteristics and growth in Schmidt number result a reduction in concentration profile. The impact of various emerging parameters has also studied numerically upon physical quantities. It has established that, with augmentation in values of buoyancy parameter there is a growth in the values of skin friction. A comparison has also carried out between current and established results with a fine agreement in both results.

Effect of Nonlinear Thermal Radiation on 3D Jeffrey Fluid Flow in the Presence of Homogeneous–Heterogeneous Reactions

2015 ◽  
Vol 21 ◽  
pp. 52-68 ◽  
Author(s):  
C.S.K. Raju ◽  
N. Sandeep ◽  
M. Gnaneswara Reddy
Keyword(s):  
Thermal Radiation ◽  
Mass Transfer Rate ◽  
Three Dimensional ◽  
Dual Solutions ◽  
Heterogeneous Reactions ◽  
Jeffrey Fluid ◽  
Nonlinear Thermal Radiation ◽  
Friction Factors ◽  
Source Sink ◽  
Shrinking Surface

In this study, we analyzed the effects of nonlinear thermal radiation on three-dimensional flow of Jeffrey fluid past a stretching/shrinking surface in the presence of homogeneous-heterogeneous reactions, non-uniform heat source/sink and suction/injection. The transformed governing equations are solved numerically using Runge-Kutta based shooting technique. We obtained good accuracy of the present results by comparing with the exited literature. The influence of dimensionless parameters on velocity, temperature and concentration profiles along with the friction factors, local Nusselt and Sherwood numbers are discussed with the help of graphs and tables. We presented dual solutions for the flow over a stretching and shrinking surfaces and found that dual solutions exist only for certain range of stretching/shrinking parameter. It is also found that the heat and mass transfer rate on the flow over a stretching surface is high while compared with the flow over a shrinking surface.

scholarly journals Heterogeneous reaction of HO<sub>2</sub> with airborne TiO<sub>2</sub> particles and its implication for climate change mitigation strategies

2018 ◽  
Vol 18 (1) ◽  
pp. 327-338 ◽  
Author(s):  
Daniel R. Moon ◽  
Giorgio S. Taverna ◽  
Clara Anduix-Canto ◽  
Trevor Ingham ◽  
Martyn P. Chipperfield ◽  
...  
Keyword(s):  
Transport Model ◽  
Heterogeneous Reaction ◽  
Three Dimensional ◽  
Mitigation Strategies ◽  
Heterogeneous Reactions ◽  
Chemical Transport Model ◽  
Flow Tube ◽  
Tio2 Particles ◽  
The Impact ◽  
Change Mitigation

Abstract. One geoengineering mitigation strategy for global temperature rises resulting from the increased concentrations of greenhouse gases is to inject particles into the stratosphere to scatter solar radiation back to space, with TiO2 particles emerging as a possible candidate. Uptake coefficients of HO2, γ(HO2), onto sub-micrometre TiO2 particles were measured at room temperature and different relative humidities (RHs) using an atmospheric pressure aerosol flow tube coupled to a sensitive HO2 detector. Values of γ(HO2) increased from 0.021 ± 0.001 to 0.036 ± 0.007 as the RH was increased from 11 to 66 %, and the increase in γ(HO2) correlated with the number of monolayers of water surrounding the TiO2 particles. The impact of the uptake of HO2 onto TiO2 particles on stratospheric concentrations of HO2 and O3 was simulated using the TOMCAT three-dimensional chemical transport model. The model showed that, when injecting the amount of TiO2 required to achieve the same cooling effect as the Mt Pinatubo eruption, heterogeneous reactions between HO2 and TiO2 would have a negligible effect on stratospheric concentrations of HO2 and O3.

Physical impact of thermo-diffusion and diffusion-thermo on Marangoni convective flow of hybrid nanofluid (MnZiFe2O4–NiZnFe2O4–H2O) with nonlinear heat source/sink and radiative heat flux

2021 ◽  
pp. 2141006
Author(s):  
Ying-Qing Song ◽  
M. Ijaz Khan ◽  
Sumaira Qayyum ◽  
R. J. Punith Gowda ◽  
R. Naveen Kumar ◽  
...  
Keyword(s):  
Entropy Generation ◽  
Heat Sink ◽  
Zinc Ferrite ◽  
Rotating Disk ◽  
Hybrid Nanofluid ◽  
Soret And Dufour Effects ◽  
Boundary Constraints ◽  
Manganese Zinc ◽  
Carrier Liquid ◽  
Dufour Number

The objective of this study is to illustrate the influence of Marangoni convection, nonlinear heat sink/source, thermal radiation, viscous dissipation, activation energy, Soret and Dufour effects on magnetohydrodynamics flow of nanofluid generated by rotating disk. Further, the entropy generation equation is derived as a function of velocity, concentration, and thermal gradients. The governing equations of the model along with associated boundary constraints are reduced to ordinary differential equations by adopting suitable similarity transformation. Later, these equations are tackled numerically by means of shooting technique. The whole examination is performed by using two distinctive nanoparticles of ferrites in particular, manganese zinc ferrite (MnZnFe2O4) and nickel zinc ferrite (NiZnFe2O4) in a carrier liquid [Formula: see text]. The physical characteristics of velocity, thermal, concentration entropy generation, skin friction, and Nusselt number against numerous pertinent parameters are discussed in detail and deliberated graphically. Result reveals that thermal gradient shows substantial enhancement for advanced values of heat sink/source parameter. The entropy production increases with an augmentation in the Brinkman number and Marangoni ratio values. The escalation in Marangoni ratio and Dufour number improves the rate of heat transference.

EXPERIMENTAL INVESTIGATION OF FLOW RESPONSE TO STATIONARY DISTURBANCE IN ROTATING-DISK FLOW

2019 ◽  
Vol XVI (2) ◽  
pp. 13-22
Author(s):  
Muhammad Ehtisham Siddiqui
Keyword(s):  
Boundary Layer ◽  
Boundary Layer Flow ◽  
Three Dimensional ◽  
Rotating Disk ◽  
Careful Analysis ◽  
Laboratory Frame ◽  
Transition To Turbulence ◽  
Turbulent Regime ◽  
Mean Velocity ◽  
Layer Flow

Three-dimensional boundary-layer flow is well known for its abrupt and sharp transition from laminar to turbulent regime. The presented study is a first attempt to achieve the target of delaying the natural transition to turbulence. The behaviour of two different shaped and sized stationary disturbances (in the laboratory frame) on the rotating-disk boundary layer flow is investigated. These disturbances are placed at dimensionless radial location (Rf = 340) which lies within the convectively unstable zone over a rotating-disk. Mean velocity profiles were measured using constant-temperature hot-wire anemometry. By careful analysis of experimental data, the instability of these disturbance wakes and its estimated orientation within the boundary-layer were investigated.

Turbulent three-dimensional dielectric electrohydrodynamic convection between two plates

2012 ◽  
Vol 696 ◽  
pp. 228-262 ◽  
Author(s):  
A. Kourmatzis ◽  
J. S. Shrimpton
Keyword(s):  
Spatial Data ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Energy Budgets ◽  
Turbulent Regime ◽  
Scalar Flux ◽  
Wide Range ◽  
Scalar Variance

AbstractThe fundamental mechanisms responsible for the creation of electrohydrodynamically driven roll structures in free electroconvection between two plates are analysed with reference to traditional Rayleigh–Bénard convection (RBC). Previously available knowledge limited to two dimensions is extended to three-dimensions, and a wide range of electric Reynolds numbers is analysed, extending into a fully inherently three-dimensional turbulent regime. Results reveal that structures appearing in three-dimensional electrohydrodynamics (EHD) are similar to those observed for RBC, and while two-dimensional EHD results bear some similarities with the three-dimensional results there are distinct differences. Analysis of two-point correlations and integral length scales show that full three-dimensional electroconvection is more chaotic than in two dimensions and this is also noted by qualitatively observing the roll structures that arise for both low (${\mathit{Re}}_{E} = 1$) and high electric Reynolds numbers (up to ${\mathit{Re}}_{E} = 120$). Furthermore, calculations of mean profiles and second-order moments along with energy budgets and spectra have examined the validity of neglecting the fluctuating electric field ${ E}_{i}^{\ensuremath{\prime} } $ in the Reynolds-averaged EHD equations and provide insight into the generation and transport mechanisms of turbulent EHD. Spectral and spatial data clearly indicate how fluctuating energy is transferred from electrical to hydrodynamic forms, on moving through the domain away from the charging electrode. It is shown that ${ E}_{i}^{\ensuremath{\prime} } $ is not negligible close to the walls and terms acting as sources and sinks in the turbulent kinetic energy, turbulent scalar flux and turbulent scalar variance equations are examined. Profiles of hydrodynamic terms in the budgets resemble those in the literature for RBC; however there are terms specific to EHD that are significant, indicating that the transfer of energy in EHD is also attributed to further electrodynamic terms and a strong coupling exists between the charge flux and variance, due to the ionic drift term.

Sign in / Sign up

Export Citation Format

Share Document