Rim slope failure mechanism in the Greek deep lignite mines – a case study

2003 ◽  
Vol 112 (3) ◽  
pp. 197-204 ◽  
Author(s):  
M. Leonardos ◽  
N. Terezopoulos
Keyword(s):  
Failure Mechanism ◽  
Slope Failure ◽  
Lignite Mines

Application of Lock-in Thermography on PCB for Fault Localization and Validation of Failure Mechanism Due to External Discrete Component Variation

2010 ◽  
Author(s):  
William Ng ◽  
Kevin Weaver ◽  
Zachary Gemmill ◽  
Herve Deslandes ◽  
Rudolf Schlangen
Keyword(s):  
Failure Mechanism ◽  
Integrated Circuit ◽  
Printed Circuit Board ◽  
Hot Spot ◽  
Circuit Board ◽  
Discrete Component ◽  
Printed Circuit ◽  
Thermal Signature ◽  
Lock In

Abstract This paper demonstrates the use of a real time lock-in thermography (LIT) system to non-destructively characterize thermal events prior to the failing of an integrated circuit (IC) device. A case study using a packaged IC mounted on printed circuit board (PCB) is presented. The result validated the failing model by observing the thermal signature on the package. Subsequent analysis from the backside of the IC identified a hot spot in internal circuitry sensitive to varying value of external discrete component (inductor) on PCB.

Case Study in Fault Isolation of a Metal Short for Yield Enhancement

2010 ◽  
Author(s):  
Sarven Ipek ◽  
David Grosjean
Keyword(s):  
Failure Analysis ◽  
Failure Mechanism ◽  
Photon Emission ◽  
Fault Isolation ◽  
Yield Enhancement ◽  
Analysis Technique ◽  
Laser Signal ◽  
Signal Injection ◽  
Microscopy Techniques

Abstract The application of an individual failure analysis technique rarely provides the failure mechanism. More typically, the results of numerous techniques need to be combined and considered to locate and verify the correct failure mechanism. This paper describes a particular case in which different microscopy techniques (photon emission, laser signal injection, and current imaging) gave clues to the problem, which then needed to be combined with manual probing and a thorough understanding of the circuit to locate the defect. By combining probing of that circuit block with the mapping and emission results, the authors were able to understand the photon emission spots and the laser signal injection microscopy (LSIM) signatures to be effects of the defect. It also helped them narrow down the search for the defect so that LSIM on a small part of the circuit could lead to the actual defect.

scholarly journals MAPPING LANDSLIDES IN LUNAR IMPACT CRATERS USING CHEBYSHEV POLYNOMIALS AND DEM’S

2016 ◽  
Vol XLI-B6 ◽  
pp. 17-24 ◽  
Author(s):  
V. Yordanov ◽  
M. Scaioni ◽  
M. T. Brunetti ◽  
M. T. Melis ◽  
A. Zinzi ◽  
...  
Keyword(s):  
Cross Sections ◽  
Chebyshev Polynomials ◽  
Slope Failure ◽  
Visual Analysis ◽  
Statistical Testing ◽  
Mass Wasting ◽  
Optical Images ◽  
Key Points ◽  
Lunar Impact

Geological slope failure processes have been observed on the Moon surface for decades, nevertheless a detailed and exhaustive lunar landslide inventory has not been produced yet. For a preliminary survey, WAC images and DEM maps from LROC at 100 m/pixels have been exploited in combination with the criteria applied by Brunetti et al. (2015) to detect the landslides. These criteria are based on the visual analysis of optical images to recognize mass wasting features. In the literature, Chebyshev polynomials have been applied to interpolate crater cross-sections in order to obtain a parametric characterization useful for classification into different morphological shapes. Here a new implementation of Chebyshev polynomial approximation is proposed, taking into account some statistical testing of the results obtained during Least-squares estimation. The presence of landslides in lunar craters is then investigated by analyzing the absolute values off odd coefficients of estimated Chebyshev polynomials. A case study on the Cassini A crater has demonstrated the key-points of the proposed methodology and outlined the required future development to carry out.

scholarly journals ROCK SLOPE SURFACE STABILITY ANALYSIS: A CASE STUDY ON HON LON ISLAND, KIEN HAI DISTRICT, KIEN GIANG PROVINCE, VIETNAM

2021 ◽  
Vol 56 (5) ◽  
pp. 340-350
Author(s):  
Ngoc Binh Vu ◽  
Truong Thanh Phi ◽  
Thanh Cong Nguyen ◽  
Hong Thinh Phi ◽  
Quy Nhan Pham ◽  
...  
Keyword(s):  
Slope Failure ◽  
Rock Slope ◽  
Slope Surface ◽  
Plane Failure ◽  
Surface Stability ◽  
Average Percentage ◽  
The Road ◽  
Wedge Failure ◽  
Analytical Results

The research aimed to study 24 rock slope surfaces along the road around Hon Lon Island, Kien Hai district, Kien Giang province, Vietnam. The analytical results have determined slope failure, wedge failure, and toppling, which occurred on almost slope surface and the average percentage of plane failure is the largest. The average percent of plane failure is 19.23%, the wedge failure is 15.35%, and the toppling fault is 6.73%. Besides, the analytical results have also identified the slope surfaces which can be the key blocks: ND-13, 18, 23, 25, 34, 37, 45, 51, 62, 63. The other analytical results show that the existence of key blocks at the rock slope surfaces in the N-S direction, dip to E at the survey locations: ND-13, 23, 63 and dip to W at the survey locations: ND-37, 45; in the NE-SW direction, dip to SE at the survey locations: ND-15, 62 and dip to NW at the survey locations: ND-18, 34; in the NW-SE direction, dip to SW at the survey location ND-51. These results have important significance to support for protecting slope surface safety.

Implementation of Decision Tree for Maintenance Policy Decision Making - A Case Study in Semiconductor Industry

2012 ◽  
Vol 591-593 ◽  
pp. 704-707 ◽  
Author(s):  
Siew Hong Ding ◽  
Teing Tien Goh ◽  
Pei Sze Tan ◽  
Siew Ching Wee ◽  
Shahrul Kamaruddin
Keyword(s):  
Decision Making ◽  
Decision Tree ◽  
Failure Mechanism ◽  
Semiconductor Industry ◽  
Policy Decision ◽  
Decision Making Process ◽  
Maintenance Policy ◽  
Machine Performance ◽  
Policy Decision Making

Suitable maintenance policy implemented in particular machine able to improve the machine performance as well as the product quality. However, selecting a suitable maintenance policy is a vital and hard work because it has to be decided from analysis of various criteria including failure mechanism and resources limitation. Thus, decision tree is suggested in this paper to provide assistance for maintenance crew in conducting a systematic and efficient decision making process in determining the suitable maintenance policy. In the end of the paper, a case study in semiconductor industry is conducted to illustrate the practicability of developed decision tree.

Sign in / Sign up

Export Citation Format

Share Document