scholarly journals Preoperative X-ray C2C6AR is applicable for prediction of difficult laryngoscopy in patients with cervical spondylosis

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Yang Zhou ◽  
Yongzheng Han ◽  
Zhengqian Li ◽  
Yuqing Zhao ◽  
Ning Yang ◽  
...  

Abstract Background Airway management is one of the most important techniques in anesthesia practice and inappropriate airway management is related with airway injury, brain hypoxia, and even death. The patients with cervical spondylosis are often confronted with difficult laryngoscopy who are more prone to appear difficult airway, so it is important to figure out valuable predictors of difficult laryngoscopy in these patients. Methods We randomly enrolled 270 patients undergoing elective cervical spine surgery and analyzed the cervical mobility data in predicting difficult laryngoscopy. The preoperative X-ray radiological indicators were measured by an attending radiologist. Cormack-Lehane scales were assessed during intubation, and patients with a class III or IV view were assigned to the difficult laryngoscopy group. Results Univariate analysis showed that the hyomental distance (HMD, the distance between the hyoid bone and the tip of the chin) and the hyomental distance ratio (HMDR, the ratio between HMD in the extension position and the one in the neutral position) might not be suitable indicators in patients with cervical spondylosis. Binary multivariate logistic regression (backward-Wald) analyses identified two independent correlative factors from the cervical mobility indicators that correlated best as a predictor of difficult laryngoscopy: modified Mallampati test (MMT) and C2C6AR (the ratio of the angle between a line passing through the bottom of the second cervical vertebra and a line passing through the bottom of the sixth cervical vertebra in the extension position and the one in the neutral position). The odds ratio (OR) and 95 % CI were 2.292(1.093–4.803) and 0.493 (0.306–0.793), respectively. C2C6AR exhibited the largest area under the curve (0.714; 95 % CI 0.633–0.794). Conclusions C2C6AR based on preoperative X-ray images may be the most accurate predictor of cervical mobility indicators for difficult laryngoscopy in patients with cervical spondylosis. Trial registration The study was registered at the Chinese Clinical Trial Registry (http://www.chictr.org.cn; identifier: ChiCTR-ROC-16,008,598) on June 6, 2016.

2020 ◽  
Author(s):  
Yang Zhou ◽  
Yongzheng Han ◽  
Zhengqian Li ◽  
Yuqing Zhao ◽  
Ning Yang ◽  
...  

Abstract Background: Airway management is one of the most important techniques in clinical anesthesia practice, and inappropriate airway management is related with airway injury, brain hypoxia, and even death. The patients with cervical spondylosis are often confronted with difficult laryngoscopy and are more prone to appear unexpected difficult airway, so it is important to figure out the most valuable predictor of difficult laryngoscopy in these patients.Methods: We randomly enrolled 270 patients undergoing elective cervical spine surgery and analyzed the cervical mobility data in predicting difficult laryngoscopy. The preoperative X-ray radiological indicators were measured by an attending radiologist. Cormack–Lehane scales were assessed during intubation, and patients with a class III or IV view were assigned to the difficult laryngoscopy group.Results: Univariate analysis showed that the hyomental distance (HMD, the distance between the hyoid bone and the tip of the chin) and the hyomental distance ratio (HMDR, the ratio between HMD in the extension position and the one in the neutral position) might not be suitable indicators in patients with cervical spondylosis. Binary multivariate logistic regression (backward-Wald) analyses identified two independent risk factors from the cervical mobility indicators that correlated best as a predictor of difficult laryngoscopy: modified Mallampati test (MMT) and C2C6AR (the ratio of the angle between a line passing through the bottom of the second cervical vertebra and a line passing through the bottom of the sixth cervical vertebra in the extension position over the one in the neutral position). The odds ratio (OR) and 95% CI were 2.292(1.093-4.803) and 0.493 (0.306-0.793), respectively. C2C6AR exhibited the largest area under the curve (0.714; 95% CI 0.633–0.794).Conclusions: C2C6AR based on preoperative X-ray images may be the most accurate predictor of cervical mobility indicators for difficult laryngoscopy in patients with cervical spondylosis.Trial registration: The study was registered at the Chinese Clinical Trial Registry (http://www.chictr.org.cn; identifier: ChiCTR-ROC-16008598) on June 6, 2016.


Coatings ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 570
Author(s):  
Olga Sánchez ◽  
Manuel Hernández-Vélez

ZnOTe compounds were grown by DC magnetron cosputtering from pure Tellurium (Te) and Zinc (Zn) cathodes in O2/Ar atmosphere. The applied power on the Zn target was constant equal to 100 W, while the one applied on the Te target took two values, i.e., 5 W and 10 W. Thus, two sample series were obtained in which the variable parameter was the distance from the Te targets to the substrate. Sample compositions were determined by Rutherford Backscattering Spectroscopy (RBS) experiments. Structural analysis was done using X-Ray diffraction (XRD) spectrometry and the growth of the hexagonal w-ZnO phase was identified in the XRD spectra. RBS results showed high bulk homogeneity of the samples forming ZnOTe alloys, with variable Te molar fraction (MF) ranging from 0.48–0.6% and from 1.9–3.1% for the sample series obtained at 5 W and 10 W, respectively. The results reflect great differences between the two sample series, particularly from the structural and optical point of view. These experiments point to the possibility of Te doping ZnO with the permanence of intrinsic defects, as well as the possibility of the formation of other Te solid phases when its content increases. The results and appreciable variations in the band gap transitions were detected from Photoluminescence (PL) measurements.


Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1362
Author(s):  
Joao Augusto Oshiro ◽  
Angelo Lusuardi ◽  
Elena M. Beamud ◽  
Leila Aparecida Chiavacci ◽  
M. Teresa Cuberes

Ureasil-Poly(ethylene oxide) (ureasil-PEO500) and ureasil-Poly(propylene oxide) (u-PPO400) films, unloaded and loaded with dexamethasone acetate (DMA), have been investigated by carrying out atomic force microscopy (AFM), ultrasonic force microscopy (UFM), contact-angle, and drug release experiments. In addition, X-ray diffraction, small angle X-ray scattering, and infrared spectroscopy have provided essential information to understand the films’ structural organization. Our results reveal that while in u-PEO500 DMA occupies sites near the ether oxygen and remains absent from the film surface, in u-PPO400 new crystalline phases are formed when DMA is loaded, which show up as ~30–100 nm in diameter rounded clusters aligned along a well-defined direction, presumably related to the one defined by the characteristic polymer ropes distinguished on the surface of the unloaded u-POP film; occasionally, larger needle-shaped DMA crystals are also observed. UFM reveals that in the unloaded u-PPO matrix the polymer ropes are made up of strands, which in turn consist of aligned ~180 nm in diameter stiffer rounded clusters possibly formed by siloxane-node aggregates; the new crystalline phases may grow in-between the strands when the drug is loaded. The results illustrate the potential of AFM-based procedures, in combination with additional physico-chemical techniques, to picture the nanostructural arrangements in polymer matrices intended for drug delivery.


1975 ◽  
Vol 68 ◽  
pp. 239-241
Author(s):  
John C. Brown ◽  
H. F. Van Beek

SummaryThe importance and difficulties of determining the height of hard X-ray sources in the solar atmosphere, in order to distinguish source models, have been discussed by Brown and McClymont (1974) and also in this Symposium (Brown, 1975; Datlowe, 1975). Theoretical predictions of this height, h, range between and 105 km above the photosphere for different models (Brown and McClymont, 1974; McClymont and Brown, 1974). Equally diverse values have been inferred from observations of synchronous chromospheric EUV bursts (Kane and Donnelly, 1971) on the one hand and from apparently behind-the-limb events (e.g. Datlowe, 1975) on the other.


2014 ◽  
Vol 69 (11-12) ◽  
pp. 1229-1236
Author(s):  
Matthias Wörsching ◽  
Constantin Hoch

Abstract Cesium hydroxide, CsOH, was for the first time characterised on the basis of single-crystal data. The structure is isotypic to the one of the room-temperature modification of NaOH and can be derived from the NaCl structure type thus allowing the comparison of all alkali metal hydroxide structures. Raman spectroscopic investigations show the hydroxide anion to behave almost as a free ion as in the gas phase. The X-ray investigations indicate possible H atom positions.


2011 ◽  
Vol 286 (41) ◽  
pp. 35699-35707 ◽  
Author(s):  
Attila Iliás ◽  
Károly Liliom ◽  
Brigitte Greiderer-Kleinlercher ◽  
Stephan Reitinger ◽  
Günter Lepperdinger

Hyaluronan (HA), a polymeric glycosaminoglycan ubiquitously present in higher animals, is hydrolyzed by hyaluronidases (HAases). Here, we used bee HAase as a model enzyme to study the HA-HAase interaction. Located in close proximity to the active center, a bulky surface loop, which appears to obstruct one end of the substrate binding groove, was found to be functionally involved in HA turnover. To better understand kinetic changes in substrate interaction, binding of high molecular weight HA to catalytically inactive HAase was monitored by means of quartz crystal microbalance technology. Replacement of the delimiting loop by a tetrapeptide interconnection increased the affinity for HA up to 100-fold, with a KD below 1 nm being the highest affinity among HA-binding proteins surveyed so far. The experimental data of HA-HAase interaction were further validated showing best fit to the theoretically proposed sequential two-site model. Besides the one, which had been shown previously in course of x-ray structure determination, a previously unrecognized binding site works in conjunction with an unbinding loop that facilitates liberation of hydrolyzed HA.


2007 ◽  
Vol 336-338 ◽  
pp. 1914-1917
Author(s):  
Lei Yang ◽  
Zhen Yi Zhang ◽  
Xiao Shan Ning ◽  
Guang He Li

In this paper, a novel and highly efficient hydroxyapatite (HA) carrier for cultivating hydrocarbon degradation bacteria (HDB) is introduced. The HA particles synthesized through a sol-gel method and different heat treatments were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and BET method. The microbial amount and activities of HDB cultivated on HA carriers were quantitatively investigated in order to assess their enriching capabilities. The results showed that HA synthesized at 550°C and the one without calcination could enrich HDB 3 and 2 magnitude orders more than the activated carbon, respectively. Mechanisms of bacterial enrichment on HA and activated carbon were also studied, and it is believed that the high bioactivity and the surface morphology of HA were responsible for the efficient reproduction of HDB. It is concluded that HA is a potential candidate to replace the conventionally used activated carbon as a novel carrier applied in the filed of bioremediation for oil contaminated soil.


2004 ◽  
Vol 76 (5) ◽  
pp. 959-964 ◽  
Author(s):  
J. Karolak-Wojciechowska ◽  
A. Fruzinski

Based on our contemporary studies on the structures of biologically active molecules, we focus our attention on the aliphatic chain and its conformation. That flexible spacer definitely influenced the balanced position of all pharmacophoric points in molecules of biological ligands. The one atomic linker and two or three atomic spacers with one heteroatom X =O, S, CH2, NH have been taken into account. The conformational preferences clearly depend on the heteroatom X. In the discussion, we utilize our own X-ray data, computation chemistry methods, population analysis, and statistical data from the Cambridge Structural Database (CSD).


1991 ◽  
Vol 46 (6) ◽  
pp. 491-498 ◽  
Author(s):  
L. Schultz ◽  
P. Lamparter ◽  
S. Steeb

AbstractThe structure of amorphous NiχZr100-χ-alloys (Χ= 30, 31, 34, 63.7, and 65), which were produced by melt spinning (MS), mechanical alloying (MA), and sputtering (SP) was studied by X-ray- and neutron diffraction yielding structure factors, pair correlation functions, coordination numbers, atomic distances, and Warren-Cowley chemical short range order parameters. The atomic arrangement within the first coordination sphere is independent of the method of preparation while in the second and higher spheres it differs between the MS- and the MA-alloys on the one side and the SP-specimens on the other side. Thus one understands that some physical properties of the different specimens differ


2000 ◽  
Vol 55 (3-4) ◽  
pp. 299-316 ◽  
Author(s):  
Dagmar Henschel ◽  
Karna Wijaya ◽  
Oliver Moers ◽  
Armand Blaschette ◽  
Peter G. Jones

Abstract In a study aim ed at the „deconstruction“ of the supramolecular aggregate 3(18C6) · 2HN( SO2Me)2 (1,18C6 = 18-crown-6), which is known to display a ladder structure with two isotactic [18C6 - Me SO2N(H)SO2Me···)∞ polymers forming the uprights and symmetrically N - H···O bonded 18C6 rings providing the rungs, the following crystalline complexes were isolated and (except for 2b) characterized by low-temperature X-ray diffraction: 18C6-ClN (SO2Me)2 (2a, triclinic, space group P1̅, Z = 2), 18C6-PhN (SO2Me)2 (2b), 18C6 -MeN(SO2Me)2 (3, monoclinic, P21/c, Z = 8), Bz18C6-HN(SO2Me)2 (4, Bz18C6 = benzo-18-crown-6, monoclinic, P21/n, Z = 4), 18C6-2 MeN (SO2Me)2 (5, triclinic, P1̅, Z = 1), 18C6-Me2SO- HN( SO2Me) (SO2Ph) (13, triclinic, P1̅, Z = 2), and 18C6-H2OMe2SO·2HN(SO2Me)2 (14, triclinic, P1̅, Z = 2). Each of the one-dimensional polymers 2a (syndiotactic), 3 (disyndiotactic) and 4 (isotactic) mimics a single upright of 1; in contrast to 1 and 2a, where the intra-catemer connectivity solely relies on S - Me ··· crow n and crown ··· O = S hydrogen bonds, this bonding system is reinforced in 3 by N -Me ··· crown and in 4 by N - H ··· crown hydrogen bonds. Complex 5 is monomeric and matches a fragment formally extruded from the catemer 3; moreover, 3 and 5 represent a rare case of two structurally characterized 18C6 complexes containing the same uncharged guest species in distinct molecular ratios. The surprising structure of the quaternary adduct 14 exhibits an [18C6 ··· MeSO2N(H)SO2Me ··· ]∞ chain, which can be regarded both as an isolated, though unmodified upright from the ladder 1 and, being syndiotactic, as a stereochemical analogue of 2a; the potentially rung-forming *NH functions in the chain are blocked by hydrogenbonded side chains of the type * N - H ··· water ··· sulfoxide ··· H - N (SO2Me)2. The ternary complex 13 consists of chains [18C6 ··· Me2SO ··· H - N (SO2Ph)SO2Me···]∞ and is not closely related to the other structures


Sign in / Sign up

Export Citation Format

Share Document