scholarly journals Optimum design of reference points distribution in three-dimensional reconstruction of dental model in intercuspal position

2021 ◽  
Vol 21 (1) ◽  
Author(s):  
Yujia Wu ◽  
Zhewen Hu ◽  
Xinyue Zhang ◽  
Hefei Bai ◽  
Yuchun Sun ◽  
...  
Keyword(s):  
Reference Point ◽  
Three Dimensional ◽  
Coordinate Measuring Machine ◽  
Distribution Patterns ◽  
Accurate Method ◽  
Reference Points ◽  
Rigid Fixation ◽  
Point Distribution ◽  
Dental Models ◽  
Measuring Machine

Abstract Purpose The scanning of plaster models for three-dimensional (3D) construction requires their rigid fixation in the intercuspal position. Factors such as installation, motion, and scanning procedures influenced the accuracy of this method, which ultimately influence the results. Therefore, the present study attempted to provide an optimal and accurate method with less complex procedures and a more accessible equipment for determining the intercuspal relation in the 3D occlusal construction of dental models. Methods A pair of plastic mounting plates that could be directly attached to a mechanical articulator was designed and 3D printed. Nine axial hemispherical concaves were introduced on the axial surface of each plate. The rigidly fixed maxillary and mandibular dental models were scanned directly. The distances DR between nine pairs of concaves on both mounting plates adhered to the maxillary and mandibular sections of the articulator were measured using the three-coordinate measuring machine Faro Edge as the reference. The present study comprised seven test groups varying in number and location. Assessing the reference points from each of the seven groups performed the 3D construction. The Geomagic Studio software was used to construct the concaves of digital casts, and the distances DM between the pairs of concaves were measured as test values. Variable differences between DR and DM were analyzed. Results An optimum distribution scheme was obtained for reference point registration by quantitatively evaluating accuracy levels of the 3D constructions of different reference point distribution patterns. This scheme can serve as a reference for related studies and dental clinic operations. Conclusions Three-dimensional construction of the intercuspal relation during scanning of the maxillary and mandibular models with an accuracy of 0.046 mm ± 0.009 mm can be achieved using the improved design of mounting plates.

Evaluation of Parts Produced by a Novel Additive Manufacturing Process

2013 ◽  
Vol 315 ◽  
pp. 63-67 ◽  
Author(s):  
Muhammad Fahad ◽  
Neil Hopkinson
Keyword(s):  
Additive Manufacturing ◽  
Rapid Prototyping ◽  
Manufacturing Process ◽  
High Speed ◽  
Three Dimensional ◽  
Coordinate Measuring Machine ◽  
Layer By Layer ◽  
Nylon 12 ◽  
Measuring Machine ◽  
End Use

Rapid prototyping refers to building three dimensional parts in a tool-less, layer by layer manner using the CAD geometry of the part. Additive Manufacturing (AM) is the name given to the application of rapid prototyping technologies to produce functional, end use items. Since AM is relatively new area of manufacturing processes, various processes are being developed and analyzed for their performance (mainly speed and accuracy). This paper deals with the design of a new benchmark part to analyze the flatness of parts produced on High Speed Sintering (HSS) which is a novel Additive Manufacturing process and is currently being developed at Loughborough University. The designed benchmark part comprised of various features such as cubes, holes, cylinders, spheres and cones on a flat base and the build material used for these parts was nylon 12 powder. Flatness and curvature of the base of these parts were measured using a coordinate measuring machine (CMM) and the results are discussed in relation to the operating parameters of the process.The result show changes in the flatness of part with the depth of part in the bed which is attributed to the thermal gradient within the build envelope during build.

scholarly journals Enabling Technology for Remote Prosthetic Alignment Tuning

2021 ◽  
Vol 186 (Supplement_1) ◽  
pp. 659-664
Author(s):  
David A Boone ◽  
Sarah R Chang
Keyword(s):  
Machine Learning ◽  
Learning Algorithm ◽  
Three Dimensional ◽  
Coordinate Measuring Machine ◽  
Software Application ◽  
Prosthetic Socket ◽  
Prosthetic Alignment ◽  
Prosthesis Alignment ◽  
Alignment Tool ◽  
Measuring Machine

ABSTRACT Introduction This research has resulted in a system of sensors and software for effectively adjusting prosthetic alignment with digital numeric control. We called this suite of technologies the Prosthesis Smart Alignment Tool (ProSAT) system. Materials and Methods The ProSAT system has three components: a prosthesis-embedded sensor, an alignment tool, and an Internet-connected alignment expert system application that utilizes machine learning to analyze prosthetic alignment. All components communicate via Bluetooth. Together, they provide for numerically controlled prosthesis alignment adjustment. The ProSAT components help diagnose and guide the correction of very subtle, difficult-to-see imbalances in dynamic gait. The sensor has been cross-validated against kinetic measurement in a gait laboratory, and bench testing was performed to validate the performance of the tool while adjusting a prosthetic socket based on machine learning analyses from the software application. Results The three-dimensional alignment of the prosthetic socket was measured pre- and postadjustment from two fiducial points marked on the anterior surface of the prosthetic socket. A coordinate measuring machine was used to derive an alignment angular offset from vertical for both conditions: pre- and postalignment conditions. Of interest is the difference in the angles between conditions. The ProSAT tool is only controlling the relative change made to the alignment, not an absolute position or orientation. Target alignments were calculated by the machine learning algorithm in the ProSAT software, based on input of kinetic data samples representing the precondition and where a real prosthetic misalignment condition was known a priori. Detected misalignments were converted by the software to a corrective adjustment in the prosthesis alignment being tested. We demonstrated that a user could successfully and quickly achieve target postalignment change within an average of 0.1°. Conclusions The accuracy of a prototype ProSAT system has been validated for controlled alignment changes by a prosthetist. Refinement of the ergonomic form and technical function of the hardware and clinical usability of the mobile software application are currently being completed with benchtop experiments in advance of further human subject testing of alignment efficiency, accuracy, and user experience.

A new approach of kinematic geometry for error identification and compensation of industrial robots

2018 ◽  
Vol 233 (5) ◽  
pp. 1783-1794
Author(s):  
Zhi Wang ◽  
Huimin Dong ◽  
Shaoping Bai ◽  
Delun Wang
Keyword(s):  
Curve Fitting ◽  
Kinematic Model ◽  
Coordinate Measuring Machine ◽  
Reference Points ◽  
Industrial Robots ◽  
Kinematic Calibration ◽  
Kinematic Pair ◽  
Good Efficiency ◽  
New Approach ◽  
Measuring Machine

A new approach for kinematic calibration of industrial robots, including the kinematic pair errors and the link errors, is developed in this paper based on the kinematic invariants. In most methods of kinematic calibration, the geometric errors of the robots are considered in forms of variations of the link parameters, while the kinematic pairs are assumed ideal. Due to the errors of mating surfaces in kinematic pairs, the fixed and moving axes of revolute pairs, or the fixed and moving guidelines of prismatic pairs, are separated, which can be concisely identified as the kinematic pair errors and the link errors by means of the kinematic pair errors model, including the self-adaption fitting of a ruled surface, or the spherical image curve fitting and the striction curve fitting. The approach is applied to the kinematic calibration of a SCARA robot. The discrete motion of each kinematic pair in the robot is completely measured by a coordinate measuring machine. Based on the global kinematic properties of the measured motion, the fixed and moving axes, or guidelines, of the kinematic pairs are identified, which are invariants unrelated to the positions of the measured reference points. The kinematic model of the robot is set up using the identified axes and guidelines. The results validate the approach developed has good efficiency and accuracy.

Evaluation of Actual Geometric Tolerances Using Coordinate Measuring Machine Data

1989 ◽  
Author(s):  
W. H. ElMaraghy ◽  
Z. Wu ◽  
H. A. ElMaraghy
Keyword(s):  
Three Dimensional ◽  
Measurement Data ◽  
Simulated Data ◽  
Coordinate Measuring Machine ◽  
Optimization Techniques ◽  
Test Cases ◽  
Tolerance Zone ◽  
Geometric Tolerances ◽  
Measuring Machine

Abstract This paper focuses on the development of a procedure and algorithms for the systematic comparison of geometric variations of measured features with their specified geometric tolerances. To automate the inspection of mechanical parts, it is necessary to analyze the measurement data captured by coordinate measuring machines (CMM) in order to detect out-of-tolerance conditions. A procedure for determining the geometric tolerances from the measured three dimensional coordinates on the surface of a cylindrical feature is presented. This procedure follows the definitions of the geometric tolerances used in the current Standards, and is capable of determining the value of each geometric tolerance from the composite 3-D data. The developed algorithms adopt the minimum tolerance zone criterion. Nonlinear numerical optimization techniques are used to fit the data to the minimum tolerance zone. Two test cases are given in the paper which demonstrate the successful determination of geometric tolerances from given simulated data.

scholarly journals Trueness and Precision of Three-Dimensional Digitizing Intraoral Devices

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Hussam Mutwalli ◽  
Michael Braian ◽  
Deyar Mahmood ◽  
Christel Larsson
Keyword(s):  
Three Dimensional ◽  
Coordinate Measuring Machine ◽  
In Vitro Study ◽  
Vitro Study ◽  
Distance Measurements ◽  
True Value ◽  
Measuring Machine ◽  
One Way Anova ◽  
Intraoral Devices

Aim. To measure the trueness and precision under repeatable conditions for different intraoral scanners (IOSs) when scanning fully edentulous arch with multiple implants. Materials and Methods. Three IOSs and one industrial scanner were used to scan one edentulous master cast containing five implant scan bodies and three spheres. The cast was scanned thirty times with each scanner device. All scans were analyzed in the inspect software, and three-dimensional locations of the implants and the interarch distance between the spheres were measured. The values were compared to measurements made with one coordinate measuring machine (true value). One-way ANOVA was used to calculate the differences between IOSs and in comparison with the true value. Results. Significant differences were found between all IOSs. For the implant measurements, Trios 3 had the lowest trueness (≤114 μm), followed by Trios 3 mono (≤63 μm) and Itero element (≤−41 μm). Trios had the lowest precision (≤135 μm), followed by Itero element (≤101 μm) and Trios 3 mono (≤100 μm). With regard to the interarch distance measurements, Trios 3 had the lowest trueness (≤68 μm), followed by Trios 3 mono (≤45 μm) and Itero element (≤40 μm). Trios 3 had the lowest precision (≤206 μm), followed by Itero element (≤124 μm) and Trios 3 mono (≤111 μm). Conclusion. The results from this in vitro study suggest that precision is low for the tested IOS devices when scanning fully edentulous arches with multiple implants.

scholarly journals 3D DIGITIZING TECHNOLOGY IN PRODUCT REVERSE DESIGN

2011 ◽  
Author(s):  
Qingjin Peng ◽  
Hector Sanchez
Keyword(s):  
Shape Recovery ◽  
Three Dimensional ◽  
Laser Scanner ◽  
Coordinate Measuring Machine ◽  
Cost Effective ◽  
3D Shape ◽  
3D Data ◽  
Cost Effective Approach ◽  
Measuring Machine ◽  
And Performance

The reverse design develops new products based on the improvement of existing products. The shape recovery of three-dimensional (3D) objects is the basis of the product reverse design. 3D digitization technology is an important tool for the 3D shape recovery. This paper analyses the current 3D data acquisition technology. The accuracy and performance of the 3D laser scanner is evaluated. A cost-effective approach is proposed to recover 3D shape of objects using a structured-light technique. Details of the proposed method are described. Application examples are presented. The accuracy is evaluated using a coordinate measuring machine.

Data Collection and Model Construction Methods for Reverse Engineering

2010 ◽  
Vol 102-104 ◽  
pp. 189-193
Author(s):  
Ling Yun Jiang ◽  
Zhi Biao Wang
Keyword(s):  
Data Collection ◽  
Point Cloud ◽  
Three Dimensional ◽  
Coordinate Measuring Machine ◽  
Digital Measurement ◽  
Original Design ◽  
Regular Feature ◽  
Technical Problems ◽  
Construction Methods ◽  
Measuring Machine

The process of creating a CAD model from an object is mainly made up of two steps: the data collection through digital measurement and the construction of parameterized and revisable model. This paper discusses the measuring process and technical problems of the Coordinate Measuring Machine (CMM) and non-contact sensor. Through comparative analysis, we determine the application scope of those approaches in measuring different dimensions of the same objects considering the time efficiency and tolerance requirement. This paper divide the objects into two categories: freeform feature objects and regular feature objects. As for the freeform feature objects, people could fit wrap-around B-spline surfaces to construct the model. Regular feature objects for mass produce contain machined surfaces which should be precisely measured and modeled. The model of regular feature object should be constructed by three-dimensional modeling software, so that it is parametric and revisable for changing and improving the original design. Sizes and position of important surfaces of the model are acquired from CMM, and those of non-important features are fitted though point cloud processing. Some profile can’t be measured directly from CMM but should be precise, so this paper proposed two methods to construct profile line and analyze error by comparing it with point cloud.

scholarly journals Research of three dimensional laser scanning coordinate measuring machine

2018 ◽  
Vol 232 ◽  
pp. 02015
Author(s):  
Zhihua Jiang ◽  
Wenjian Zhang ◽  
Lizhen Cui
Keyword(s):  
3D Printing ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Coordinate Measuring Machine ◽  
Coordinate Measuring Machines ◽  
Measuring Instrument ◽  
Calibration System ◽  
Measuring Range ◽  
Measuring Machine

Three dimensional laser scanning coordinate measuring machine is suitable for the measurement of 3D printing products, and its measuring range depends on the three coordinate measuring machine. It is the main 3D printing product measuring instrument [1]. In this paper, the principle of laser scanning three coordinate measuring machine is analyzed. The accuracy and reliability of the calibration system for 3D printing products are verified. According to the newly revised JJF 1064 Calibration specification for coordinate measuring machines [3], it is calibrated.

Sign in / Sign up

Export Citation Format

Share Document