scholarly journals Life cycle assessment and leather production

2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Diego Navarro ◽  
Jianhui Wu ◽  
Wei Lin ◽  
Pere Fullana-i-Palmer ◽  
Rita Puig

Abstract Leather industry is facing new trends on production and consumption patterns due to society concerns. Circular economy is proposing a transition from the current economic model to a more sustainable one, in which waste is designed out and resources will be reused and recycled as long as possible. In this transition, Life Cycle Assessment (LCA) is an important tool to help decision-making. In the present review, 39 English-written peer-reviewed papers related to LCA and leather have been found, 30 of which were published in the last 6 years, meaning LCA is nowadays an important subject. Papers are presented within 4 types, focused on: 1) the whole leather production process, 2) a single step in the production process (e.g, new technologies for unhairing), 3) waste treatment and recycling, and 4) life cycle thinking with ideas on long-term strategies for leather industries. As discussed in the literature review, leather industry has important challenges to address: increasing sustainability and transparency on the supply chain, and strengthening the beauty of leather. Taking up these challenges from a life cycle perspective will help leather industry flourish in the coming future. Graphical abstract

2021 ◽  
pp. 0734242X2110179
Author(s):  
Daniela Camana ◽  
Sara Toniolo ◽  
Alessandro Manzardo ◽  
Mirco Piron ◽  
Antonio Scipioni

Life cycle assessment (LCA) and related tools are commonly used to evaluate the potential environmental impacts of waste treatment scenarios. This manuscript presents a mini-review of studies published over the last 10 years in Italy and aims to investigate how life cycle thinking tools are applied to assess the environmental sustainability of local-level waste policies. Results reveal that different waste flows, technologies and policies have been investigated independently and in varying detail. Review suggests that boundary selection significantly affects LCA results; integration of different waste systems is therefore crucial to avoid spatial or temporal shifts of environmental impacts. Moreover, the description of methodological characteristics, limitations and transversal aspects of Italian waste management studies allows various stakeholders to assess the reliability of past and future research for waste policy planning and rebound effects prevention. This review also highlights the need to define minimum requirements of transparency and ease of reporting of the studies to private and public stakeholders. Finally, the paper investigates whether using both the organisational LCA and the life cycle sustainability approach for the overall waste management process may be useful to develop a standard method to address multi-functionalities and multiple sites.


2020 ◽  
Vol 202 ◽  
pp. 01003
Author(s):  
Shabbir H. Gheewala

The current model of a linear economy with end-of-pipe waste treatment is not sustainable. Cleaner production helps reduce resource use and emissions, but is still not an optimal solution without considering a life cycle perspective. Life cycle-based tools such as life cycle assessment and life cycle costing are useful for identifying optimal environmental and economic options for product systems. SDG 12 dealing with responsible consumption and production is key for sustainability. Developing of a circular economy requires life cycle thinking and life cycle-based tools for assessment. All these issues are discussed along with illustrative examples.


Author(s):  
Serenella Sala ◽  
Andrea Martino Amadei ◽  
Antoine Beylot ◽  
Fulvio Ardente

Abstract Purpose Life cycle thinking (LCT) and life cycle assessment (LCA) are increasingly considered pivotal concept and method for supporting sustainable transitions. LCA plays a relevant role in decision support, for the ambition of a holistic coverage of environmental dimensions and for the identification of hotspots, possible trade-offs, and burden shifting among life cycle stages or impact categories. These features are also relevant when the decision support is needed in policy domain. With a focus on EU policies, the present study explores the evolution and implementation of life cycle concepts and approaches over three decades. Methods Adopting an historical perspective, a review of current European Union (EU) legal acts and communications explicitly mentioning LCT, LCA, life cycle costing (LCC), and environmental footprint (the European Product and Organisation Environmental Footprint PEF/OEF) is performed, considering the timeframe from 1990 to 2020. The documents are categorised by year and according to their types (e.g. regulations, directives, communications) and based on the covered sectors (e.g. waste, energy, buildings). Documents for which life cycle concepts and approaches had a crucial role are identified, and a shortlist of these legal acts and communications is derived. Results and discussion Over the years, LCT and life cycle approaches have been increasingly mentioned in policy. From the Ecolabel Regulation of 1992, to the Green Deal in 2019, life cycle considerations are of particular interest in the EU. The present work analysed a total of 159 policies and 167 communications. While in some sectors (e.g. products, vehicles, and waste) life cycle concepts and approaches have been adopted with higher levels of prescriptiveness, implementation in other sectors (e.g. food and agriculture) is only at a preliminary stage. Moreover, life cycle (especially LCT) is frequently addressed and cited only as a general concept and in a rather generic manner. Additionally, more stringent and rigorous methods (LCA, PEF/OEF) are commonly cited only in view of future policy developments, even if a more mature interest in lifecycle is evident in recent policies. Conclusion The EU has been a frontrunner in the implementation of LCT/LCA in policies. However, despite a growing trend in this implementation, the development of new stringent and mandatory requirements related to life cycle is still relatively limited. In fact, there are still issues to be solved in the interface between science and policy making (such as verification and market surveillance) to ensure a wider implementation of LCT and LCA.


2021 ◽  
Vol 13 (9) ◽  
pp. 4948
Author(s):  
Núria Boix Rodríguez ◽  
Giovanni Formentini ◽  
Claudio Favi ◽  
Marco Marconi

Face masks are currently considered key equipment to protect people against the COVID-19 pandemic. The demand for such devices is considerable, as is the amount of plastic waste generated after their use (approximately 1.6 million tons/day since the outbreak). Even if the sanitary emergency must have the maximum priority, environmental concerns require investigation to find possible mitigation solutions. The aim of this work is to develop an eco-design actions guide that supports the design of dedicated masks, in a manner to reduce the negative impacts of these devices on the environment during the pandemic period. Toward this aim, an environmental assessment based on life cycle assessment and circularity assessment (material circularity indicator) of different types of masks have been carried out on (i) a 3D-printed mask with changeable filters, (ii) a surgical mask, (iii) an FFP2 mask with valve, (iv) an FFP2 mask without valve, and (v) a washable mask. Results highlight how reusable masks (i.e., 3D-printed masks and washable masks) are the most sustainable from a life cycle perspective, drastically reducing the environmental impacts in all categories. The outcomes of the analysis provide a framework to derive a set of eco-design guidelines which have been used to design a new device that couples protection requirements against the virus and environmental sustainability.


2007 ◽  
Vol 8 (2) ◽  
pp. 32-56
Author(s):  
Shiaw‐Wen Tien ◽  
Chung‐Ching Chiu ◽  
Yi‐Chan Chung ◽  
Chih‐Hung Tsai ◽  
Chin‐Fa Chang

2020 ◽  
Author(s):  
Xinzhe Zhu ◽  
Chi-Hung Ho ◽  
Xiaonan Wang

<p><a></a><a>The production process of many active pharmaceutical ingredients such as sitagliptin could cause severe environmental problems due to the use of toxic chemical materials and production infrastructure, energy consumption and wastes treatment. The environmental impacts of sitagliptin production process were estimated with life cycle assessment (LCA) method, which suggested that the use of chemical materials provided the major environmental impacts. Both methods of Eco-indicator 99 and ReCiPe endpoints confirmed that chemical feedstock accounted 83% and 70% of life-cycle impact, respectively. Among all the chemical materials used in the sitagliptin production process, </a><a>trifluoroacetic anhydride </a>was identified as the largest influential factor in most impact categories according to the results of ReCiPe midpoints method. Therefore, high-throughput screening was performed to seek for green chemical substitutes to replace the target chemical (i.e. trifluoroacetic anhydride) by the following three steps. Firstly, thirty most similar chemicals were obtained from two million candidate alternatives in PubChem database based on their molecular descriptors. Thereafter, deep learning neural network models were developed to predict life-cycle impact according to the chemicals in Ecoinvent v3.5 database with known LCA values and corresponding molecular descriptors. Finally, 1,2-ethanediyl ester was proved to be one of the potential greener substitutes after the LCA data of these similar chemicals were predicted using the well-trained machine learning models. The case study demonstrated the applicability of the novel framework to screen green chemical substitutes and optimize the pharmaceutical manufacturing process.</p>


2017 ◽  
Vol 140 ◽  
pp. 1204-1216 ◽  
Author(s):  
Elena Maria Iannicelli-Zubiani ◽  
Martina Irene Giani ◽  
Francesca Recanati ◽  
Giovanni Dotelli ◽  
Stefano Puricelli ◽  
...  

Author(s):  
Sila Temizel-Sekeryan ◽  
Andrea L. Hicks

Global production and consumption of silver nanoparticles (nAg) are forecasted to increase due to their applications in modern technologies. This situation raises concerns related to their environmental and human health...


2019 ◽  
Vol 125 ◽  
pp. 10005
Author(s):  
Yoyon Wahyono ◽  
H. Hadiyanto ◽  
Mochamad Arief Budihardjo ◽  
Widayat

Energy balance analysis study for the production process of biodiesel needs to be done to find out whether a production process of biodiesel activity has a surplus energy or minus energy. This study aims to analyse the balance of energy of the plantation of palm, production of palm oil, and production process units of biodiesel with the life cycle assessment in Banyuasin - Indonesia. The results of this study indicate that the largest energy input in the plantation of palm, production of palm oil, and production process units of biodiesel sequentially is the use of urea as N-fertilizer, electricity, and methanol. The value of NEB and NER in the production process of palm biodiesel sequentially is 5871 MJ and 1.17. Finally, the production process of palm biodiesel in Banyuasin area has a positive energy balance. The activity of production of palm biodiesel is proper to operate because it produces an energy surplus.


Sign in / Sign up

Export Citation Format

Share Document