scholarly journals Geophysical properties of an epithermal Au-Ag deposit in British Columbia, Canada

2018 ◽  
Vol 6 (4) ◽  
pp. T907-T918
Author(s):  
Bahman Abbassi ◽  
Li Zhen Cheng ◽  
Jeremy P. Richards ◽  
Juliane Hübert ◽  
Jean M. Legault ◽  
...  
Keyword(s):  
British Columbia ◽  
Magnetic Susceptibility ◽  
Volcanic Rocks ◽  
Magnetization Vector ◽  
Direct Access ◽  
Vector Model ◽  
High Potassium ◽  
Epithermal System ◽  
Magnetic Inversion ◽  
Felsic Volcanic

The Newton Au-Ag deposit is an intermediate sulfidation state epithermal system in British Columbia, Canada. Multiple types of geophysical data are interpreted and evaluated with drillcore petrophysical, geochemical, and geologic observations to better understand the geophysical signature of the Newton epithermal system. Airborne [Formula: see text]-ray data sets indicate elevated emission counts of K, eTh, and eU over the Newton epithermal system, which are caused by hydrothermal alteration. Drillcore [Formula: see text]-ray measurements also indicate high potassium concentrations related to the K-rich phyllosilicates in the form of argillic and quartz-sericite alteration assemblages. Magnetization vector inversion (MVI) is used to recover an unconstrained 3D magnetization vector model of the system on regional and deposit scales. The regional MVI has resolved a deep concentric-shaped low magnetic zone that is interpreted as a porphyry system beneath the epithermal deposit. At the deposit scale, 3D direct current (DC) resistivity and induced polarization (IP) inversion, and unconstrained MVI revealed finer details of the epithermal system architecture. Cooperative DC/IP and magnetic inversion, at the deposit scale, constrained the magnetic susceptibility model and recovered a more precise susceptibility image of the epithermal system that is well-matched with borehole geology. The integrated geophysical interpretation helped to resolve several 3D latent geologic features in places without direct access to drillcore samples. We identified four petrophysical domains based on the three cooperatively inverted physical properties, including electrical resistivity, IP chargeability, and magnetic susceptibility. The combined geophysical models differentiated porphyritic intrusions (chargeability/susceptibility lows), disseminated sulfides (resistivity lows and chargeability highs), a Cu-rich zone in mafic volcanic rocks (susceptibility/chargeability highs and resistivity lows), and an Au-Ag-Cu-rich zone with silicification in felsic volcanic rocks (chargeability/susceptibility lows and resistivity highs). These petrophysical domains also provide useful exploration vectors for identification of similar epithermal systems.

scholarly journals Three-dimensional imaging of a Ag-Au-rich epithermal system in British Columbia, Canada, using airborne z-axis tipper electromagnetic and ground-based magnetotelluric data

Geophysics ◽  
2016 ◽  
Vol 81 (1) ◽  
pp. B1-B12 ◽  
Author(s):  
Juliane Hübert ◽  
Benjamin M. Lee ◽  
Lijuan Liu ◽  
Martyn J. Unsworth ◽  
Jeremy P. Richards ◽  
...  
Keyword(s):  
British Columbia ◽  
Volcanic Rocks ◽  
Three Dimensional ◽  
Data Sets ◽  
Borehole Data ◽  
Magnetotelluric Data ◽  
Electric Field Amplitude ◽  
Epithermal System ◽  
Geologic Model ◽  
Felsic Volcanic

We have evaluated results from a study combining airborne z-axis tipper electromagnetic (ZTEM) and ground-based magnetotelluric (MT) data to image an epithermal system in British Columbia. The spatially coincident use of these two methods allowed for a direct comparison of both data sets in the overlapping frequency band and showed that both measurements were consistent. Inversion of just the ZTEM data suffered from the lack of electric field amplitude information, which could be provided by the MT data. Three-dimensional inversion modeling of the two individual data sets was performed. Models of electrical resistivity derived from both data sets were consistent and could be correlated with the geological and structural setting of the mineralization. Gold is associated with disseminated pyrite and marcasite in quartz-sericite-altered felsic volcanic rocks and intrusions, especially near the contact with mafic volcanic rocks and a late diorite intrusion. The quartz-sericite alteration yields a conductivity anomaly, relative to the more resistive mafic country rocks. Although ZTEM and MT do not possess the resolution of the geologic model derived from borehole data, our model agrees well with a regional assessment of the deposit.

scholarly journals Geochemistry, geochronology, and fluid inclusion study of the Late Cretaceous Newton epithermal gold deposit, British Columbia

2016 ◽  
Vol 53 (1) ◽  
pp. 10-33 ◽  
Author(s):  
Lijuan Liu ◽  
Jeremy P. Richards ◽  
S. Andrew DuFrane ◽  
Mark Rebagliati
Keyword(s):  
British Columbia ◽  
Gold Deposit ◽  
Late Cretaceous ◽  
Gold Mineralization ◽  
Volcanic Rocks ◽  
Fluid Inclusion Study ◽  
Epithermal Gold ◽  
Epithermal Gold Deposit ◽  
Felsic Volcanic ◽  
Felsic Volcanic Rocks

Newton is an intermediate-sulfidation epithermal gold deposit related to Late Cretaceous continental-arc magmatism in south-central British Columbia. Disseminated gold mineralization occurs in quartz–sericite-altered Late Cretaceous felsic volcanic rocks, and feldspar–quartz–hornblende porphyry and quartz–feldspar porphyry intrusions. The mineralization can be divided into three stages: (1) disseminated pyrite with microscopic gold inclusions, and sparse quartz–pyrite ± molybdenite veins; (2) disseminated marcasite with microscopic gold inclusions and minor base-metal sulfides; and (3) polymetallic veins of pyrite–chalcopyrite–sphalerite–arsenopyrite. Re–Os dating of molybdenite from a stage 1 vein yielded an age of 72.1 ± 0.3 Ma (published by McClenaghan in 2013). The age of the host rocks has been constrained by U–Pb dating of zircon: Late Cretaceous felsic volcanic rocks, 72.1 ± 0.6 Ma (Amarc Resources Ltd., unpublished data, reported by McClenaghan in 2013); feldspar–quartz–hornblende porphyry, 72.1 ± 0.5 Ma; quartz–feldspar porphyry, 70.9 ± 0.5 Ma (Amarc Resources Ltd., unpublished data, reported by McClenaghan in 2013). The mineralized rocks are intruded by a barren diorite, with an age of 69.3 ± 0.4 Ma. Fluid inclusions in quartz–pyrite ± molybdenite ± gold veins yielded an average homogenization temperature of 313 ± 51 °C (number of samples, n = 82) and salinity of 4.8 ± 0.9 wt.% NaCl equiv. (n = 46), suggesting that a relatively hot and saline fluid likely of magmatic origin was responsible for the first stage of mineralization. Some evidence for boiling was also observed in the veins. However, the bulk of the gold mineralization occurs as disseminations in the wall rocks, suggesting that wall-rock reactions were the main control on ore deposition.

scholarly journals Petrogenesis and Geodynamic Implications of Miocene Felsic Magmatic Rocks in the Wuyu Basin, Southern Gangdese Belt, Qinghai-Tibet Plateau

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 655
Author(s):  
Hanzhi Chen ◽  
Mingcai Hou ◽  
Fuhao Xiong ◽  
Hongwei Tang ◽  
Gangqiang Shao
Keyword(s):  
Lower Crust ◽  
Volcanic Rocks ◽  
Tibet Plateau ◽  
Southern Tibet ◽  
Mixed Product ◽  
Good Opportunity ◽  
Magmatic Rocks ◽  
Adakitic Rocks ◽  
Felsic Volcanic ◽  
Qinghai Tibet Plateau

Miocene felsic magmatic rocks with high Sr/Y ratios are widely distributed throughout the Gangdese belt of southern Tibet. These provide a good opportunity to explore the magmatic process and deep dynamic mechanisms that occurred after collision between the Indo and the Asian plates. In this paper, felsic volcanic rocks from the Zongdangcun Formation in the Wuyu Basin in the central part of the southern Gangdese belt are used to disclose their origin. Zircon U-Pb geochronology analysis shows that the felsic magmatism occurred at ca. 10.3 ± 0.2 Ma, indicating that the Zongdangcun Formation formed during the Miocene. Most of these felsic magmatic rocks plot in the rhyolite area in the TAS diagram. The rhyolite specimens from the Zongdangcun Formation have the characteristics of high SiO2 (>64%), K2O, SiO2, and Sr contents, a low Y content and a high Sr/Y ratio, and the rocks are rich in LREE and depleted in HREE, showing geochemical affinity to adakitic rocks. The rocks have an enriched Sr-Nd isotopic composition (εNd(t) = −6.76 to −6.68, (87Sr/86Sr)i = 0.7082–0.7088), which is similar to the mixed product of the juvenile Lhasa lower continental crust and the ancient Indian crust. The Hf isotopes of zircon define a wide compositional range (εHf(t) = −4.19 to 6.72) with predominant enriched signatures. The Miocene-aged crustal thickness in southern Tibet, calculated on the basis of the Sr/Y and (La/Yb)N ratios was approximately 60–80 km, which is consistent with the thickening of the Qinghai-Tibet Plateau. The origin of Miocene felsic magmatic rocks with high Sr/Y ratios in the middle section of the Gangdese belt likely involved a partial melting of the thickened lower crust, essentially formed by the lower crust of the Lhasa block, with minor contribution from the ancient Indian crust. After comprehensively analyzing the post-collisional high Sr/Y magmatic rocks (33–8 Ma) collected from the southern margin of the Gangdese belt, we propose that the front edge tearing and segmented subduction of the Indian continental slab may be the major factor driving the east-west trending compositional changes of the Miocene adakitic rocks in southern Tibet.

Using polycyclic aromatic hydrocarbons to determine post-wildfire contamination and sediment sources in a large watershed in central British Columbia, Canada

2021 ◽  
Author(s):  
Kristen Kieta ◽  
Philip Owens ◽  
Ellen Petticrew
Keyword(s):  
British Columbia ◽  
Magnetic Susceptibility ◽  
Polycyclic Aromatic Hydrocarbons ◽  
Aromatic Hydrocarbons ◽  
Large Scale ◽  
Sediment Samples ◽  
Burned Areas ◽  
Total Pahs ◽  
Polycyclic Aromatic ◽  
The Impact

<p>The Nechako River Basin (NRB) in central British Columbia is a large (52,000 km<sup>2</sup>), regulated basin that supports populations of sockeye and chinook salmon and the endangered Nechako white sturgeon. These important species are experiencing population declines and one potential cause of this decline is excess sediment, which can clog their spawning habitat and reduce juvenile success. This excess sediment is likely the product of a combination of factors, the most visible being the significant land cover changes that have occurred in the basin, which includes pressure from forestry and agriculture, the Mountain Pine Beetle epidemic, and large-scale wildfires in 2018. Focusing specifically on the impact of the 2018 wildfires on sediment transport from upland burned areas to adjacent waterways, this research aimed to determine the spatial and temporal contamination of tributaries and the mainstem of the Nechako River with polycyclic aromatic hydrocarbons (PAHs), which are produced during the combustion of organic matter and have been identified as toxic to aquatic organisms and to humans. Additionally, this study intended to determine if burned areas were a more significant contributor of sediment than unburned areas and better understand the utility of PAHs as a potential tracer. Source soil samples were collected in 2018 and 2020 from burned and unburned sites, and suspended sediment samples were collected throughout the ice-free period from 2018-2020 in three tributaries and three mainstem sites. All samples were analysed for PAHs, magnetic susceptibility, colour, and particle size. Results from the fall 2018 source samples show a significant difference in PAH concentrations between unburned and burned soils, and while concentrations of PAHs in source soils in 2020 were lower than in 2018, they were still elevated compared to unburned soils. Sediment samples showed that concentrations of total PAHs are higher in the mainstem sites than in the tributaries, with the greatest concentrations consistently found at the most downstream site on the mainstem of the Nechako River. Concentrations across sites were highest in samples taken during the spring snowmelt period in 2019, have decreased throughout the rest of the sampling period (2019-2020), and are well below sediment quality guidelines for total PAHs. In addition to determining the spatial and temporal extent of PAH contamination, this study also aims to use PAHs along with colour and measurements of magnetic susceptibility to trace sediments associated with the 2018 wildfires. The high cost of PAH analysis limits the number of samples that can be analysed and thus, these additional tracers will allow for the use of models such as MixSIAR that improve with a more robust number of samples. As large-scale megafires continue to burn across the globe, understanding their potential to contribute PAHs to local waterbodies and potentially be used as a tracer is as prescient as ever.</p>

Geochemistry and Isotope Composition of Paleoproterozoic Granites and Felsic Volcanics of the Elash Graben: Evidence of the Heterogeneity of the Early Precambrian Crust

2021 ◽  
Vol 62 (10) ◽  
pp. 1175-1187
Author(s):  
A.D. Nozhkin ◽  
O.M. Turkina ◽  
K.A. Savko
Keyword(s):  
Isotope Composition ◽  
Volcanic Rocks ◽  
Rare Metal ◽  
Temporal Association ◽  
Metal Deposit ◽  
Wide Range ◽  
Rare Metal Deposit ◽  
Geochronological Study ◽  
Felsic Volcanic ◽  
Felsic Volcanic Rocks

Abstract —The paper presents results of a petrogeochemical and isotope–geochronological study of the granite–leucogranite association of the Pavlov massif and felsic volcanics from the Elash graben (Biryusa block, southwest of the Siberian craton). A characteristic feature of the granite–leucogranites is their spatial and temporal association with vein aplites and pegmatites of the East Sayan rare-metal province. The U–Pb age of zircon from granites of the Pavlov massif (1852 ± 5 Ma) is close to the age of the pegmatites of the Vishnyakovskoe rare-metal deposit (1838 ± 3 Ma). The predominant biotite porphyritic granites and leucogranites of the Pavlov massif show variable alkali ratios (K2O/Na2O = 1.1–2.3) and ferroan (Fe*) index and a peraluminous composition; they are comparable with S-granites. The studied rhyolites of the Tagul River (SiO2 = 71–76%) show a low ferroan index, a high K2O/Na2O ratio (1.6–4.0), low (La/Yb)n values (4.3–10.5), and a clear Eu minimum (Eu/Eu* = 0.3–0.5); they are similar to highly fractionated I-granites. All coeval late Paleoproterozoic (1.88–1.85 Ga) granites and felsic volcanics of the Elash graben have distinct differences in composition, especially in the ferroan index and HREE contents, owing to variations in the source composition and melting conditions during their formation at postcollisions extension. The wide range of the isotope parameters of granites and felsic volcanic rocks (εNd from +2.0 to –3.7) and zircons (εHf from +3.0 to +0.8, granites of the Toporok massif) indicates the heterogeneity of the crustal basement of the Elash graben, which formed both in the Archean and in the Paleoproterozoic.

Rare earth element concentrations in Quaternary volcanic rocks of southwestern British Columbia

1984 ◽  
Vol 21 (6) ◽  
pp. 731-736 ◽  
Author(s):  
Nathan L. Green ◽  
Paul Henderson
Keyword(s):  
British Columbia ◽  
Earth Element ◽  
Volcanic Rocks ◽  
Crustal Contamination ◽  
Lake Area ◽  
Calc Alkaline ◽  
Lower Light ◽  
The Individual ◽  
High Level ◽  
Ree Patterns

A suite of hy-normative hawaiites, ne-normative mugearite, and calc-alkaline andesitic rocks from the Garibaldi Lake area exhibits fractionated, slightly concave-upward REE patterns (CeN/YbN = 4.5–15), heavy REE contents about 5–10 times the chondritic abundances, and no Eu anomalies. It is unlikely that the REE patterns provide information concerning partial melting conditions beneath southwestern British Columbia because they have probably been modified substantially by upper crustal processes including crustal contamination and (or) crystal fractionation. The REE contents of the Garibaldi Lake lavas are not incompatible with previous interpretations that (1) the hawaiites have undergone considerable fractionation of olivine, plagioclase, and clinopyroxene; and (2) the individual andesitic suites were derived from separate batches of chemically distinct magma that evolved along different high-level crystallization trends. In general, however, the andesites are characterized by lower light REE contents than the basaltic andesites. These differences in LREE abundances may reflect different amounts of LREE-rich accessory phases, such as apatite, sphene, or allanite, assimilated from the underlying quartz diorites.

Nd isotopic characteristics of metamorphic and plutonic rocks of the Coast Mountains near Prince Rupert, British Columbia

1998 ◽  
Vol 35 (5) ◽  
pp. 556-561 ◽  
Author(s):  
P J Patchett ◽  
G E Gehrels ◽  
C E Isachsen
Keyword(s):  
British Columbia ◽  
Volcanic Rocks ◽  
Metamorphic Rocks ◽  
Published Data ◽  
Isotopic Data ◽  
Crustal Component ◽  
Coast Mountains ◽  
Crustal Rocks ◽  
Metasedimentary Rocks ◽  
Plutonic Rocks

Nd isotopic data are presented for a suite of metamorphic and plutonic rocks from a traverse across the Coast Mountains between Terrace and Prince Rupert, British Columbia, and for three contrasting batholiths in the Omineca Belt of southern Yukon. A presumed metamorphic equivalent of Jurassic volcanic rocks of the Stikine terrane gives epsilon Nd = +6, and a number of other metaigneous and metasedimentary rocks in the core of the Coast Mountains give epsilon Nd values from +3 to +7. A single metasedimentary rock approximately 3 km east of the Work Channel shear zone gives a epsilon Nd value of -9. Coast Belt plutons in the traverse yield epsilon Nd from -1 to +2. The Omineca Belt plutons give epsilon Nd from -10 to -17. All results are consistent with published data in demonstrating that (i) juvenile origins for both igneous and metamorphic rocks are common in the Coast Belt; (ii) representatives of a continental-margin sedimentary sequence with Precambrian crustal Nd are tectonically interleaved in the Coast Mountains; (iii) Coast Mountains plutons can be interpreted as derived from a blend of metamorphic rocks like those seen at the surface, or as arc-type melts contaminated with the older crustal component; and (iv) Omineca Belt plutons are dominated by remelted Precambrian crustal rocks.

Sign in / Sign up

Export Citation Format

Share Document