scholarly journals Study on low-temperature crack resistance of zirconium tungstate modified asphalt mastic and asphalt mixtures

2021 ◽  
pp. 38-47
Author(s):  
Z.S. Pei ◽  
J.Y. Yi* ◽  
D.C. Feng ◽  
J.J. Li
Keyword(s):  
Low Temperature ◽  
Crack Resistance ◽  
Asphalt Mixtures ◽  
Zirconium Tungstate ◽  
Modified Asphalt ◽  
Asphalt Mastic ◽  
Temperature Crack

scholarly journals Feasibility Evaluation of Preparing Asphalt Mixture with Low-Grade Aggregate, Rubber Asphalt and Desulphurization Gypsum Residues

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1481 ◽  
Author(s):  
Xiaoliang Zhang ◽  
Ben Zhang ◽  
Huaxin Chen ◽  
Dongliang Kuang
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Crack Resistance ◽  
Asphalt Mixture ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Limestone Powder ◽  
Low Grade ◽  
High Temperature Stability ◽  
Temperature Crack

Road construction consumes great amounts of high-grade natural resources. Using low-grade natural rocks or some solid wastes as substitute materials is a hot topic. Considering this, the feasibility of using low-grade granite aggregate, solid waste-based filler (desulphurization gypsum residues, DGR) and binder (waste tire rubber modified asphalt, RMA) simultaneously in asphalt mixtures has been fully investigated in this research. The commonly used base asphalt and limestone powder (LP) filler were control groups. Material characteristics of raw materials mainly including micro-morphology, functional group, mineral phase, chemical composition and thermal stability were first evaluated in order to recognize them. Four asphalt mixtures (two asphalt binder and two filler) were then designed by standard Superpave method. Finally, a detailed investigation into the pavement performance of asphalt mixtures was carried out. The moisture damage resistance and low-temperature crack resistance were detected by the changing rules of stability, strength and fracture energy, and the high-temperature stability and fatigue performance were determined by wheel tracking test and indirect tensile (IDT) fatigue test, respectively. Results suggested that RMA and DGR both showed positive effects on the low-temperature crack resistance and fatigue property of the granite asphalt mixture. DGR also strengthened moisture stability. The contribution of RMA on high-temperature deformation resistance of the granite asphalt mixture was compelling. It can offset the insufficiency in high-temperature stability made by DGR. A conclusion can be made that asphalt mixture prepared with granite, DGR and RMA possesses satisfactory pavement performances.

Research on Crack Resistance Evaluation of Asphalt Mixture at Low Temperature

2013 ◽  
Vol 753-755 ◽  
pp. 668-672
Author(s):  
Li Jie Ma ◽  
Hai Bin Chen ◽  
Jin Yu Zhang
Keyword(s):  
Low Temperature ◽  
Crack Resistance ◽  
Tensile Strain ◽  
Unit Volume ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Bending Test ◽  
Test Unit ◽  
Research Areas ◽  
Temperature Crack

In order to improve the low temperature evaluation, on the basis of the low temperature bending test unit volume destruction to evaluate the low temperature crack resistance of asphalt mixtures. Since the destruction can be indicators of unit volume mixture critical flexural tensile strain and flexural strength of two indicators integrated. Therefore, use it to assess the low temperature crack resistance of asphalt mixture is more scientific, the indicators has also become a new method of low-temperature research areas.

Characteristics of Different Warm Mix Asphalt Compacted at Low Temperature

2011 ◽  
Vol 255-260 ◽  
pp. 3166-3170
Author(s):  
Li Ming Wang ◽  
Yi Qiu Tan ◽  
Zhen Wu Shi
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Crack Resistance ◽  
Temperature Stability ◽  
High Temperature Stability ◽  
Obvious Effect ◽  
Water Sensitivity ◽  
Active Additive ◽  
Surface Active ◽  
Temperature Crack

Additives on low temperature compaction and performances of compacted mixtures, the author devised low temperature environment compaction test, and then, comparison tests of volume parameters, high temperature stability, low temperature crack resistance and water sensitivity were conducted. Tests results showed that the wax additives and the surface-active additive can significantly contribute to mixtures low-temperature compactibility. The wax additive helps to improve high temperature stability obviously, and has no significant contribution to low temperature crack resistance and water sensitivity. The surface-active additive directly reduces water sensitivity, the wax additive indirectly plays the role of reducing water sensitivity by increasing the density of mixture, and the foam additive has no obvious effect on the water sensitivity.

Laboratory Study of Pavement Performance of Basalt Fiber-Modified Asphalt Mixture

2011 ◽  
Vol 266 ◽  
pp. 175-179 ◽  
Author(s):  
Yuan Xun Zheng ◽  
Ying Chun Cai ◽  
Ya Min Zhang
Keyword(s):  
Asphalt Mixture ◽  
Basalt Fiber ◽  
Temperature Stability ◽  
Asphalt Mixtures ◽  
Polyester Fiber ◽  
Pavement Performance ◽  
High Temperature Stability ◽  
Modified Asphalt ◽  
And Control ◽  
Temperature Crack

In order to discuss the effect of the basalt fiber on reinforcing pavement performance of asphalt mixtures, the optimum dosage of asphalt and fibers were studied by the method of Marshall test and rut test firstly. Then pavement performances of basalt fiber-modified asphalt mixtures were investigated through tests of high temperature stability, water stability and low temperature crack resistance, and compared with that of polyester fiber, xylogen fiber and control mixture. The testing results showed that the pavement performance of fiber-modified asphalt mixture are improved and optimized comparing with control asphalt mixture, and the performance of basalt fiber-modified asphalt mixture with best composition were excelled than those of polyester fiber and xylogen fiber.

Low Temperature Fracture Properties of Polyphosphoric Acid Modified Asphalt Mixtures

2012 ◽  
Vol 24 (8) ◽  
pp. 1089-1096 ◽  
Author(s):  
Eyoab T. Zegeye ◽  
Ki H. Moon ◽  
Mugur Turos ◽  
Timothy R. Clyne ◽  
Mihai O. Marasteanu
Keyword(s):  
Low Temperature ◽  
Polyphosphoric Acid ◽  
Asphalt Mixtures ◽  
Fracture Properties ◽  
Modified Asphalt ◽  
Temperature Fracture

scholarly journals Laboratory Investigation of Carbon Black/Bio-Oil Composite Modified Asphalt

Materials ◽  
2021 ◽  
Vol 14 (17) ◽  
pp. 4910
Author(s):  
Ping Zhang ◽  
Lan Ouyang ◽  
Lvzhen Yang ◽  
Yi Yang ◽  
Guofeng Lu ◽  
...  
Keyword(s):  
High Temperature ◽  
Low Temperature ◽  
Carbon Black ◽  
Influencing Factors ◽  
Asphalt Mixture ◽  
Asphalt Mixtures ◽  
Test Results ◽  
Modified Asphalt ◽  
Temperature Performance ◽  
Bio Oil

As environmentally friendly materials, carbon black and bio-oil can be used as modifiers to effectively enhance the poor high-temperature and low-temperature performance of base asphalt and its mixture. Different carbon black and bio-oil contents and shear time were selected as the test influencing factors in this work. Based on the Box–Behnken design (BBD), carbon black/bio-oil composite modified asphalt was prepared to perform the softening point, penetration, multiple stress creep and recovery (MSCR), and bending beam rheometer (BBR) tests. The response surface method (RSM) was used to analyze the test results. In addition, the base asphalt mixtures and the optimal performance carbon black/bio-oil composite modified asphalt mixtures were formed for rutting and low-temperature splitting tests. The results show that incorporating carbon black can enhance the asphalt’s high-temperature performance by the test results of irrecoverable creep compliance (Jnr) and strain recovery rate (R). By contrast, the stiffness modulus (S) and creep rate (M) test results show that bio-oil can enhance the asphalt’s low-temperature performance. The quadratic function models between the performance indicators of carbon black/bio-oil composite modified asphalt and the test influencing factors were established based on the RSM. The optimal performance modified asphalt mixture’s carbon black and bio-oil content was 15.05% and 9.631%, and the shear time was 62.667 min. It was revealed that the high-temperature stability and low-temperature crack resistance of the carbon black/bio-oil composite modified asphalt mixture were better than that of the base asphalt mixture because of its higher dynamic stability (DS) and toughness. Therefore, carbon black/bio-oil composite modified asphalt mixture can be used as a new type of choice for road construction materials, which is in line with green development.

Sign in / Sign up

Export Citation Format

Share Document