The Study of Modification Process of the Indian Rubber with Functional Groups by Ozonolysis of Latex

2014 ◽  
pp. 181-192
Keyword(s):  
Functional Groups ◽  
Modification Process

scholarly journals FTIR analysis of chemical changes in wood induced by steaming and longitudinal compression

Cellulose ◽  
2020 ◽  
Vol 27 (12) ◽  
pp. 6811-6829 ◽  
Author(s):  
Mátyás Báder ◽  
Róbert Németh ◽  
Jakub Sandak ◽  
Anna Sandak
Keyword(s):  
Functional Groups ◽  
Cell Walls ◽  
Beech Wood ◽  
Industrial Applications ◽  
Structural Elements ◽  
Longitudinal Compression ◽  
Chemical Mechanisms ◽  
Modification Process ◽  
Physical Chemical ◽  
Detailed Interpretation

Abstract Pleating is an optimal way to increase bendability of wood used in diverse industrial applications. It results in the excessive buckling of cell walls and modifications of constitutive polymers. However, thoughtful understanding of the physical–chemical mechanisms of that modification process is very limited. The main purpose of the present study was to identify changes in functional groups of wood polymers induced by longitudinal compression. Four types of wood samples prepared from beech and sessile oak (untreated, steamed, longitudinally compressed and fixated for 1 min as well as longitudinally compressed and fixated for 18 h) were assessed by infrared spectroscopy. The spectra interpretation revealed that changes can be observed in hydroxyl as well as in carbon–oxygen single and carbon-hydrogen functional groups of polysaccharides and lignin. Beech wood seems to be more susceptible to investigated modification processes as compared to oak. Detailed interpretation of infrared spectra allows identification of changes in the hygroscopicity of wood as well as alterations in the linkage between structural elements in the polymer matrix of wood induced by the applied treatments. Graphic Abstract

scholarly journals Characteristics and Stability of Mercury Vapor Adsorption over Two Kinds of Modified Semicoke

2014 ◽  
Vol 2014 ◽  
pp. 1-7 ◽  
Author(s):  
Zhang Huawei ◽  
Liu Xiuli ◽  
Wang Li ◽  
Liang Peng
Keyword(s):  
Functional Groups ◽  
Active Sites ◽  
Chemical Properties ◽  
Mercury Vapor ◽  
Vapor Adsorption ◽  
Modification Process ◽  
Delocalized Electron ◽  
The Stability ◽  
Physical And Chemical ◽  
And Chemical Properties

In an attempt to produce effective and lower price gaseous Hg0adsorbents, two methods of HCl and KMnO4/heat treatment were used respectively for the surface modification of liginite semicoke from inner Mongolia. The different effects of modification process on the surface physical and chemical properties were analyzed. The characteristics and stability of mercury vapor adsorption over two kinds of modified semicoke were investigated. The results indicated that modification process caused lower micropore quantity and volume capacity of semicoke; the C-Cl functional groups, C=O bond and delocalized electronπon the surface of Cl-SC, the amorphous higher valencyMnx+, and O=C–OH functional groups on the surface of Mn-H-SC were the active sites for oxidation and adsorption of gaseous Hg0. Modification process led to higher mercury removal efficiency of semicoke at 140°C and reduced the stability of adsorbed mercury of semicoke in simulated water circumstance simultaneously.

Improving integration between functional groups: A case in organization change and implications for theory and practice

1971 ◽  
Author(s):  
Warren G. Bennis ◽  
Michael Beer ◽  
Gerald R. Pieters ◽  
Alan T. Hundert ◽  
Samuel H. Marcus ◽  
...  
Keyword(s):  
Functional Groups ◽  
Organization Change ◽  
Theory And Practice

HYDROXYAPATITE, ALGINATE, AND CHITOSAN FOR BONE SCAFFOLDS: SPECTROSCOPY STUDY

2016 ◽  
Vol 19 (2) ◽  
pp. 93-100
Author(s):  
Lalita El Milla
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Functional Groups ◽  
Bone Growth ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Tissue Engineering Scaffolds ◽  
Hydroxyapatite Powder ◽  
Materials Used

Scaffolds is three dimensional structure that serves as a framework for bone growth. Natural materials are often used in synthesis of bone tissue engineering scaffolds with respect to compliance with the content of the human body. Among the materials used to make scafffold was hydroxyapatite, alginate and chitosan. Hydroxyapatite powder obtained by mixing phosphoric acid and calcium hydroxide, alginate powders extracted from brown algae and chitosan powder acetylated from crab. The purpose of this study was to examine the functional groups of hydroxyapatite, alginate and chitosan. The method used in this study was laboratory experimental using Fourier Transform Infrared (FTIR) spectroscopy for hydroxyapatite, alginate and chitosan powders. The results indicated the presence of functional groups PO43-, O-H and CO32- in hydroxyapatite. In alginate there were O-H, C=O, COOH and C-O-C functional groups, whereas in chitosan there were O-H, N-H, C=O, C-N, and C-O-C. It was concluded that the third material containing functional groups as found in humans that correspond to the scaffolds material in bone tissue engineering.

High Resolution Displacement of Functional Groups onto Fluorocarbon Resin Surface by Using ArF Excimer Laser

1996 ◽  
Vol 451 ◽  
Author(s):  
T. Shimizu ◽  
M. Murahara
Keyword(s):  
Contact Angle ◽  
High Resolution ◽  
Laser Beam ◽  
Thin Layer ◽  
Functional Groups ◽  
Excimer Laser ◽  
Laser Fluence ◽  
Large Area ◽  
Three Solutions ◽  
Arf Excimer Laser

ABSTRACTA Fluorocarbon resin surface was selectively modified by irradiation with a ArF laser beam through a thin layer of NaAlO2, B(OH)3, or H2O solution to give a hydrophilic property. As a result, with low fluence, the surface was most effectively modified with the NaAlO2 solution among the three solutions. However, the contact angle in this case changed by 10 degrees as the fluence changed only 1mJ/cm2. When modifying a large area of the surface, high resolution displacement could not be achieved because the laser beam was not uniform in displacing functional groups. Thus, the laser fluence was successfully made uniform by homogenizing the laser beam; the functional groups were replaced on the fluorocarbon resin surface with high resolution, which was successfully modified to be hydrophilic by distributing the laser fluence uniformly.

Visible Light-Promoted Catalytic Ring-Opening Isomerization of 1,2-Disubstituted Cyclopropanols to Linear Ketones

2019 ◽  
Author(s):  
Marharyta V. Laktsevich-Iskryk ◽  
Nastassia A. Varabyeva ◽  
Volha V. Kazlova ◽  
Vladimir N. Zhabinskii ◽  
Vladimir A. Khripach ◽  
...  
Keyword(s):  
Visible Light ◽  
Functional Groups ◽  
Ring Opening ◽  
Radical Intermediates ◽  
Reaction Proceeds

In this article, we report a photocatalytic protocol for the isomerization of 1,2-disubstituted cyclopropanols to linear ketones. The reaction proceeds <i>via</i> radical intermediates and tolerates various functional groups.

Visible Light-Promoted Catalytic Ring-Opening Isomerization of 1,2-Disubstituted Cyclopropanols to Linear Ketones

2019 ◽  
Author(s):  
Marharyta V. Laktsevich-Iskryk ◽  
Nastassia A. Varabyeva ◽  
Volha V. Kazlova ◽  
Vladimir N. Zhabinskii ◽  
Vladimir A. Khripach ◽  
...  
Keyword(s):  
Visible Light ◽  
Functional Groups ◽  
Ring Opening ◽  
Radical Intermediates ◽  
Reaction Proceeds

In this article, we report a photocatalytic protocol for the isomerization of 1,2-disubstituted cyclopropanols to linear ketones. The reaction proceeds <i>via</i> radical intermediates and tolerates various functional groups.

Fe-Catalyzed Conjunctive Cross-Couplings of Unactivated Alkenes with Grignard Reagents

2020 ◽  
Author(s):  
Lei Liu ◽  
Wes Lee ◽  
Cassandra R. Youshaw ◽  
Mingbin Yuan ◽  
Michael B. Geherty ◽  
...  
Keyword(s):  
Functional Groups ◽  
Cross Coupling ◽  
Alkyl Halides ◽  
Grignard Reagents ◽  
Turnover Frequency ◽  
Diverse Range ◽  
Cascade Cyclization ◽  
Radical Cascade

The first iron-catalyzed three-component cross-coupling of unactivated olefins with alkyl halides and Grignard reagents is reported. The reaction operates under fast turnover frequency and tolerates a diverse range of sp2-hybridized nucleophiles, alkyl halides, and unactivated olefins bearing diverse functional groups to yield the desired 1,2-alkylarylated products with high regiocontrol. Further, we demonstrate that this protocol is amenable for the synthesis of new (hetero)carbocycles including tetrahydrofurans and pyrrolidines via a three-component radical cascade cyclization/arylation that forges three new C-C bonds.

Broad Assessment of Bioactivity of a Collection of Spiroindane Pyrrolidines Through “Cell Painting”

2020 ◽  
Author(s):  
Zarko Boskovic ◽  
Manvendra Singh ◽  
Zachary Pearson ◽  
Nathan Garza
Keyword(s):  
Biological Activity ◽  
Small Molecules ◽  
Functional Groups ◽  
Organelle Morphology

A collection of small molecules has been synthesized by composing photo-cycloaddition, C-H functionalization, and N-capping strategies. Multidimensional biological fingerprints of molecules comprising this collection have been recorded as changes in cell and organelle morphology. This untargeted, phenotypic approach allowed for a broad assessment of biological activity to be determined. Reproducibility and the magnitude of measured fingerprints revealed activity of several treatments. Reactive functional groups, such as imines, dominated the observed activity. Two non-reactive candidate compounds with distinct bioactivity fingerprints were identified, as well.

Sign in / Sign up

Export Citation Format

Share Document