Simulation of CO2 storage in a heterogeneous aquifer

Author(s):  
C Ukaegbu ◽  
O Gundogan ◽  
E Mackay ◽  
G Pickup ◽  
A Todd ◽  
...  

The fate of carbon dioxide (CO2) injected into a deep saline aquifer depends largely on the geological structure within the aquifer. For example, low permeability layers, such as shales or mudstones, will act as barriers to vertical flow of CO2 gas, whereas high permeability channels may assist the lateral migration of CO2. It is therefore important to include permeability heterogeneity in models for numerical flow simulation As an example of a heterogeneous system, a model of fluvial-incised valley deposits was used. Flow simulations were performed using the generalized equation-of-state model—greenhouse gas software package from Computer Modelling Group, which is a compositional simulator, specially adapted for CO2 storage. The impacts of residual gas and water saturations, gas diffusion in the aqueous phase, hysteresis, and permeability anisotropy on the distribution of CO2 between the gaseous and aqueous phases were examined. Gas diffusion in the aqueous phase was found to significantly enhance solubility trapping of CO2, even when hysteretic trapping of CO2 as a residual phase is taken into account.

2021 ◽  
Author(s):  
Raj Deo Tewari ◽  
Mohd Faizal Sedaralit

Abstract Natural gas is the noble fuel of 21st century. Consumption increased nearly 30% in last decade. Exploitation of conventional, unconventional, and contaminated gas resources are in focus to meet the demand. There are number of giant gas fields discovered worldwide and some of them with higher degree of contaminants viz. CO2, H2S and Hg. Additionally, they have operating challenges of high pressure and temperature. It becomes more complex when discovery is in offshore environment. This study presents the development and production, separation, transportation and identification & evaluation of storage sites and sequestration and MMV plan of a giant carbonate gas field in offshore Malaysia. Geological, Geophysical and petrophysical data used to describe the reservoir architecture, property distribution and spatial variation in more than 1000m thick gas bearing formation. Laboratory studies carried out to generate the rock and fluid representative SCAL (G-W), EOS and Supercritical CO2-brine relative permeability, geomechanics and geochemical data for recovery and storage estimates in simulation model and evaluating the post storage scenario. These data are critical in hydrocarbon gas prediction and firming up the number of development wells and in the simulation of CO2 storage depleted carbonate gas field. Important is to understand the mechanism in the target field for storage capacity, types of storage- structural and stratigraphic trapping, solubility trapping, residual trapping and mineral trapping. Study covers methodologies developed for minimization of hydrocarbon loss during contaminants separation and utilization of CO2 in usable products. Uncertainty and risk analysis have been carried out to have range of solution for production prediction and CO2 storage. Coupled Simulation studies predict the production plateau rate and 5 Tscf recovery separated contaminants profile and volume > one Tscf in order to have suitable geological structure for storage safely forever. Major uncertainties in the dynamic and coupled geomechanical-geochemical dynamic model has been captured and P90, P50, P10 forecast and storage rates and volumes have been calculated. Results includes advance methodologies of separation of hydrocarbon gas and CO2 like membrane and cryogenics for bulk separation of CO2 from raw gas and its transportation in liquid and supercritical form for storage. Study estimates components of sequestration mechanism, effect of heterogeneity on transport in porous media and height of stored CO2 in depleted reservoir and migration of plume vertically and horizontally. Generation of chemical product using separated CO2 for industrial use is highlighted.


2017 ◽  
Vol 57 (1) ◽  
pp. 100 ◽  
Author(s):  
Emad A. Al-Khdheeawi ◽  
Stephanie Vialle ◽  
Ahmed Barifcani ◽  
Mohammad Sarmadivaleh ◽  
Stefan Iglauer

CO2 migration and storage capacity are highly affected by various parameters (e.g. reservoir temperature, vertical to horizontal permeability ratio, cap rock properties, aquifer depth and the reservoir heterogeneity). One of these parameters, which has received little attention, is brine salinity. Although brine salinity has been well demonstrated previously as a factor affecting rock wettability (i.e. higher brine salinity leads to more CO2-wet rocks), its effect on the CO2 storage process has not been addressed effectively. Thus, we developed a three-dimensional homogeneous reservoir model to simulate the behaviour of a CO2 plume in a deep saline aquifer using five different salinities (ranging from 2000 to 200 000 ppm) and have predicted associated CO2 migration patterns and trapping capacities. CO2 was injected at a depth of 1408 m for a period of 1 year at a rate of 1 Mt year–1 and then stored for the next 100 years. The results clearly indicate that 100 years after the injection of CO2 has stopped, the salinity has a significant effect on the CO2 migration distance and the amount of mobile, residual and dissolved CO2. First, the results show that higher brine salinity leads to an increase in CO2 mobility and CO2 migration distance, but reduces the amount of residually trapped CO2. Furthermore, high brine salinity leads to reduced dissolution trapping. Thus, we conclude that less-saline aquifers are preferable CO2 sinks.


2004 ◽  
Author(s):  
Long Nghiem ◽  
Peter Sammon ◽  
Jim Grabenstetter ◽  
Hiroshi Ohkuma

Geosciences ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 354 ◽  
Author(s):  
Yann Le Gallo ◽  
José de Dios

Investigation into geological storage of CO2 is underway at Hontomín (Spain). The storage reservoir is a deep saline aquifer formed by naturally fractured carbonates with low matrix permeability. Understanding the processes that are involved in CO2 migration within these formations is key to ensure safe operation and reliable plume prediction. A geological model encompassing the whole storage complex was established based upon newly-drilled and legacy wells. The matrix characteristics were mainly obtained from the newly drilled wells with a complete suite of log acquisitions, laboratory works and hydraulic tests. The model major improvement is the integration of the natural fractures. Following a methodology that was developed for naturally fractured hydrocarbon reservoirs, the advanced characterization workflow identified the main sets of fractures and their main characteristics, such as apertures, orientations, and dips. Two main sets of fracture are identified based upon their mean orientation: North-South and East-West with different fracture density for each the facies. The flow capacity of the fracture sets are calibrated on interpreted injection tests by matching their permeability and aperture at the Discrete Fracture Network scale and are subsequently upscaled to the geological model scale. A key new feature of the model is estimated permeability anisotropy induced by the fracture sets.


2020 ◽  
Vol 60 (2) ◽  
pp. 662
Author(s):  
Saira ◽  
Furqan Le-Hussain

Oil recovery and CO2 storage related to CO2 enhance oil recovery are dependent on CO2 miscibility. In case of a depleted oil reservoir, reservoir pressure is not sufficient to achieve miscible or near-miscible condition. This extended abstract presents numerical studies to delineate the effect of alcohol-treated CO2 injection on enhancing miscibility, CO2 storage and oil recovery at immiscible and near-miscible conditions. A compositional reservoir simulator from Computer Modelling Group Ltd. was used to examine the effect of alcohol-treated CO2 on the recovery mechanism. A SPE-5 3D model was used to simulate oil recovery and CO2 storage at field scale for two sets of fluid pairs: (1) pure CO2 and decane and (2) alcohol-treated CO2 and decane. Alcohol-treated CO2 consisted of a mixture of 4 wt% of ethanol and 96 wt% of CO2. All simulations were run at constant temperature (70°C), whereas pressures were determined using a pressure-volume-temperature simulator for immiscible (1400 psi) and near-miscible (1780 psi) conditions. Simulation results reveal that alcohol-treated CO2 injection is found superior to pure CO2 injection in oil recovery (5–9%) and CO2 storage efficiency (4–6%). It shows that alcohol-treated CO2 improves CO2 sweep efficiency. However, improvement in sweep efficiency with alcohol-treated CO2 is more pronounced at higher pressures, whereas improvement in displacement efficiency is more pronounced at lower pressures. The proposed methodology has potential to enhance the feasibility of CO2 sequestration in depleted oil reservoirs and improve both displacement and sweep efficiency of CO2.


2017 ◽  
Vol 114 ◽  
pp. 4486-4493 ◽  
Author(s):  
Jose F. Mediato ◽  
Jesus García-Crespo ◽  
Esther Izquierdo ◽  
Jose L. García-Lobón ◽  
Conxi Ayala ◽  
...  

1996 ◽  
Vol 37 (6-8) ◽  
pp. 1155-1160 ◽  
Author(s):  
L.G.H. van der Meer

2021 ◽  
Vol 882 (1) ◽  
pp. 012047
Author(s):  
Wahyu Eko Junian ◽  
Andri Yadi Paembonan ◽  
Harnanti Y Hutami ◽  
Muhammad Arief Wicaksono

Abstract Cibaliung is an area that is traversed by the Au-Ag-Cu mineralization pathway from low to intermediate sulfide epithermal system. The implemented techniques for delineating probable gold deposits by the lithology contact and structures that control epithermal gold mineralization systems in the area include first vertical derivative (FHD), vertical derivative (VD), second vertical derivative (SVD), analytic signal (SA), and tilt angle (TA). The results shows that high continuity of anomaly contrast in the direction of Northwest (NW), North-Northwest (NNW), and North-Northeast (NNE) is presumed to be the target geological structure of the study area. Furthermore, the contrast value of magnetic anomaly represents the lithology contact lies in the direction of the West and the East of the area.


Sign in / Sign up

Export Citation Format

Share Document