Paper 30: Review of Surface Texture Measurement and the Associated Metrological Problems

1967 ◽  
Vol 182 (11) ◽  
pp. 330-343
Author(s):  
E. Green
Keyword(s):  
Surface Texture ◽  
Quantitative Assessment ◽  
Three Dimensional ◽  
Two Dimensions ◽  
Texture Measurement ◽  
Relative Roughness ◽  
Electronic Circuitry ◽  
Different Types ◽  
The Many ◽  
Physical Phenomena

A brief review is presented of the physical phenomena (optical, capacitance, conductance, absorption, pneumatic, and hydraulic) which have been utilized in the various types of instruments developed to express, by means of a single index, the relative roughness of different specimens. The readings taken with such instruments are normally functions of the three-dimensional characteristics of the surface under test but, since they are of an empirical nature, there is little or no correlation between measurements made with the different types of instruments. Instruments measuring in two dimensions and recording in absolute units of length have been universally accepted. The most popular instrument is the stylus tracer type with electronic amplification of the stylus movement. The output of these devices is dependent on factors that have been standardized by the manufacturers (electronic circuitry, the form of stylus, etc.) and other elements, the characteristics of which are not uniform for all instruments (stylus support and mounting, etc.). Reference is made to the basic datum to which the readings of tracer instruments refer, the envelope line and the centre line, and the different parameters currently advocated as presenting an adequate means of describing and forming a quantitative assessment of the surface under test. The use of digital computer techniques for eliminating the many analogue devices necessary for the evaluation of the different parameters is explained.

scholarly journals Cell Bioprinting: The 3D-Bioplotter™ Case

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4005 ◽  
Author(s):  
Angelats Lobo ◽  
Ginestra
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Petri Dish ◽  
Two Dimensions ◽  
Point Of View ◽  
Lack Of Information ◽  
Synthetic Materials ◽  
Different Types ◽  
Available Information ◽  
User Friendly

The classic cell culture involves the use of support in two dimensions, such as a well plate or a Petri dish, that allows the culture of different types of cells. However, this technique does not mimic the natural microenvironment where the cells are exposed to. To solve that, three-dimensional bioprinting techniques were implemented, which involves the use of biopolymers and/or synthetic materials and cells. Because of a lack of information between data sources, the objective of this review paper is, to sum up, all the available information on the topic of bioprinting and to help researchers with the problematics with 3D bioprinters, such as the 3D-Bioplotter™. The 3D-Bioplotter™ has been used in the pre-clinical field since 2000 and could allow the printing of more than one material at the same time, and therefore to increase the complexity of the 3D structure manufactured. It is also very precise with maximum flexibility and a user-friendly and stable software that allows the optimization of the bioprinting process on the technological point of view. Different applications have resulted from the research on this field, mainly focused on regenerative medicine, but the lack of information and/or the possible misunderstandings between papers makes the reproducibility of the tests difficult. Nowadays, the 3D Bioprinting is evolving into another technology called 4D Bioprinting, which promises to be the next step in the bioprinting field and might promote great applications in the future.

scholarly journals Development and use of three-dimensional image analysis algorithms to evaluate puffing of banana slices undergone combined hot air and microwave drying

2018 ◽  
Author(s):  
Maturada Jinorose ◽  
A. Satienkijumpai ◽  
Sakamon Devahastin
Keyword(s):  
Image Analysis ◽  
Physical Properties ◽  
Surface Texture ◽  
Three Dimensional ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Microwave Drying ◽  
Attractive Alternative ◽  
Dimensional Image ◽  
Hot Air

Puffing is an attractive alternative for the production of healthy crisp snacks without frying. Although image analysis has been used in some prior studies to evaluate puffing, such an evaluation was made only in one or two dimensions, which is inadequate when a sample deforms in three dimensions. In this study, use of combined hot-air and microwave drying to dry and puff banana slices was first evaluated. Algorithms were then developed to characterize the changes in the appearance of puffed banana slices. Various image-based parameters, both in two and three dimensions were assessed and used to monitor the puffing. Keywords: Deformation; Puffing; Imge analysis; Physical properties; Surface texture 

Ultrastructural Investigations of the Contractile Filaments of Amoebae

1974 ◽  
Vol 32 ◽  
pp. 188-189
Author(s):  
P.L. Moore
Keyword(s):  
Cytoplasmic Streaming ◽  
Three Dimensional ◽  
Freeze Fracture ◽  
Amoeboid Movement ◽  
Different Types ◽  
Chemical Conditions ◽  
Complete Interpretation

Previous freeze fracture results on the intact giant, amoeba Chaos carolinensis indicated the presence of a fibrillar arrangement of filaments within the cytoplasm. A complete interpretation of the three dimensional ultrastructure of these structures, and their possible role in amoeboid movement was not possible, since comparable results could not be obtained with conventional fixation of intact amoebae. Progress in interpreting the freeze fracture images of amoebae required a more thorough understanding of the different types of filaments present in amoebae, and of the ways in which they could be organized while remaining functional.The recent development of a calcium sensitive, demembranated, amoeboid model of Chaos carolinensis has made it possible to achieve a better understanding of such functional arrangements of amoeboid filaments. In these models the motility of demembranated cytoplasm can be controlled in vitro, and the chemical conditions necessary for contractility, and cytoplasmic streaming can be investigated. It is clear from these studies that “fibrils” exist in amoeboid models, and that they are capable of contracting along their length under conditions similar to those which cause contraction in vertebrate muscles.

Laser Scanning Confocal Microscopy and Three-Dimesnsional Reconstruction of the Mitotic Spindles of Unequally Dividing Embryonic Cells

1990 ◽  
Vol 48 (3) ◽  
pp. 166-167
Author(s):  
J. Holy ◽  
G. Schatten
Keyword(s):  
Confocal Microscopy ◽  
Mitotic Spindle ◽  
Laser Scanning ◽  
Three Dimensional ◽  
Laser Scanning Confocal Microscopy ◽  
Two Dimensions ◽  
Embryonic Cells ◽  
Mitotic Spindles ◽  
Cleavage Division ◽  
Scanning Confocal Microscopy

One of the classic limitations of light microscopy has been the fact that three dimensional biological events could only be visualized in two dimensions. Recently, this shortcoming has been overcome by combining the technologies of laser scanning confocal microscopy (LSCM) and computer processing of microscopical data by volume rendering methods. We have employed these techniques to examine morphogenetic events characterizing early development of sea urchin embryos. Specifically, the fourth cleavage division was examined because it is at this point that the first morphological signs of cell differentiation appear, manifested in the production of macromeres and micromeres by unequally dividing vegetal blastomeres.The mitotic spindle within vegetal blastomeres undergoing unequal cleavage are highly polarized and develop specialized, flattened asters toward the micromere pole. In order to reconstruct the three-dimensional features of these spindles, both isolated spindles and intact, extracted embryos were fluorescently labeled with antibodies directed against either centrosomes or tubulin.

A Study on Utilization of Three-Dimensional Sensor Lip Image for Developing a Pronunciation Recognition System

2019 ◽  
Vol 63 (5) ◽  
pp. 50402-1-50402-9 ◽  
Author(s):  
Ing-Jr Ding ◽  
Chong-Min Ruan
Keyword(s):  
Principal Component Analysis ◽  
Automatic Speech Recognition ◽  
Feature Fusion ◽  
Three Dimensional ◽  
Principal Component ◽  
Recognition System ◽  
Geometrical Characteristics ◽  
3D Geometry ◽  
Different Types ◽  
The Disabled

Abstract The acoustic-based automatic speech recognition (ASR) technique has been a matured technique and widely seen to be used in numerous applications. However, acoustic-based ASR will not maintain a standard performance for the disabled group with an abnormal face, that is atypical eye or mouth geometrical characteristics. For governing this problem, this article develops a three-dimensional (3D) sensor lip image based pronunciation recognition system where the 3D sensor is efficiently used to acquire the action variations of the lip shapes of the pronunciation action from a speaker. In this work, two different types of 3D lip features for pronunciation recognition are presented, 3D-(x, y, z) coordinate lip feature and 3D geometry lip feature parameters. For the 3D-(x, y, z) coordinate lip feature design, 18 location points, each of which has 3D-sized coordinates, around the outer and inner lips are properly defined. In the design of 3D geometry lip features, eight types of features considering the geometrical space characteristics of the inner lip are developed. In addition, feature fusion to combine both 3D-(x, y, z) coordinate and 3D geometry lip features is further considered. The presented 3D sensor lip image based feature evaluated the performance and effectiveness using the principal component analysis based classification calculation approach. Experimental results on pronunciation recognition of two different datasets, Mandarin syllables and Mandarin phrases, demonstrate the competitive performance of the presented 3D sensor lip image based pronunciation recognition system.

Simulating Self-Regeneration and Self-Replication Processes Using Movable Cellular Automata with a Mutual Equilibrium Neighborhood

2020 ◽  
Vol 29 (4) ◽  
pp. 741-757
Author(s):  
Kateryna Hazdiuk ◽  
◽  
Volodymyr Zhikharevich ◽  
Serhiy Ostapov ◽  
◽  
...  
Keyword(s):  
Cellular Automata ◽  
Cellular Automaton ◽  
Three Dimensional ◽  
Computer Models ◽  
The Self ◽  
Model Construction ◽  
Natural Phenomena ◽  
Different Types ◽  
Movable Cellular Automata ◽  
Self Replication

This paper deals with the issue of model construction of the self-regeneration and self-replication processes using movable cellular automata (MCAs). The rules of cellular automaton (CA) interactions are found according to the concept of equilibrium neighborhood. The method is implemented by establishing these rules between different types of cellular automata (CAs). Several models for two- and three-dimensional cases are described, which depict both stable and unstable structures. As a result, computer models imitating such natural phenomena as self-replication and self-regeneration are obtained and graphically presented.

Sam Domains in Multiple Diseases

2020 ◽  
Vol 27 (3) ◽  
pp. 450-476 ◽  
Author(s):  
Marian Vincenzi ◽  
Flavia Anna Mercurio ◽  
Marilisa Leone
Keyword(s):  
Disease Onset ◽  
Protein Domain ◽  
Sam Domain ◽  
Different Types ◽  
Protein Functions ◽  
Helical Protein ◽  
The Many ◽  
Novel Therapeutic Strategies ◽  
Novel Drug ◽  
Pathological Event

Background: The sterile alpha motif (Sam) domain is a small helical protein module, able to undergo homo- and hetero-oligomerization, as well as polymerization, thus forming different types of protein architectures. A few Sam domains are involved in pathological processes and consequently, they represent valuable targets for the development of new potential therapeutic routes. This study intends to collect state-of-the-art knowledge on the different modes by which Sam domains can favor disease onset and progression. Methods: This review was build up by searching throughout the literature, for: a) the structural properties of Sam domains, b) interactions mediated by a Sam module, c) presence of a Sam domain in proteins relevant for a specific disease. Results: Sam domains appear crucial in many diseases including cancer, renal disorders, cataracts. Often pathologies are linked to mutations directly positioned in the Sam domains that alter their stability and/or affect interactions that are crucial for proper protein functions. In only a few diseases, the Sam motif plays a kind of "side role" and cooperates to the pathological event by enhancing the action of a different protein domain. Conclusion: Considering the many roles of the Sam domain into a significant variety of diseases, more efforts and novel drug discovery campaigns need to be engaged to find out small molecules and/or peptides targeting Sam domains. Such compounds may represent the pillars on which to build novel therapeutic strategies to cure different pathologies.

Transition Times in Memory

2018 ◽  
Author(s):  
Donatella della Porta ◽  
Massimiliano Andretta ◽  
Tiago Fernandes ◽  
Eduardo Romanos ◽  
Markos Vogiatzoglou
Keyword(s):  
Theoretical Model ◽  
Social Movement ◽  
Transition Period ◽  
Two Dimensions ◽  
Democratic Regime ◽  
Organizational Models ◽  
Different Types ◽  
Transition Times ◽  
Movement Participation

The second chapter covers the main characteristics of transition time in the four countries: Italy, Greece, Spain, and Portugal. After developing the theoretical model on paths of transition, with a focus on social movement participation, the chapter looks at social movements and protest events as turning points during transition, covering in particular the specific movement actors, their organizational models, and their repertoires of action and frames. The chapter focuses on two dimensions: the role of mobilization in the transition period, which implies the analysis of how elites and masses interact, ally, or fight with each other in the process, and the outcome of transitions as continuity versus rupture of the democratic regime vis-à-vis the old one. It concludes by elaborating some hypotheses on how different modes of transition may produce different types and uses of (transition) memories.

Geological Field Sketches and Illustrations

2019 ◽  
Author(s):  
Matthew J. Genge
Keyword(s):  
Cross Sections ◽  
Earth Science ◽  
Three Dimensional ◽  
Worked Examples ◽  
Scientific Publications ◽  
Thin Sections ◽  
Geological Features ◽  
Different Types ◽  
The Subject

Drawings, illustrations, and field sketches play an important role in Earth Science since they are used to record field observations, develop interpretations, and communicate results in reports and scientific publications. Drawing geology in the field furthermore facilitates observation and maximizes the value of fieldwork. Every geologist, whether a student, academic, professional, or amateur enthusiast, will benefit from the ability to draw geological features accurately. This book describes how and what to draw in geology. Essential drawing techniques, together with practical advice in creating high quality diagrams, are described the opening chapters. How to draw different types of geology, including faults, folds, metamorphic rocks, sedimentary rocks, igneous rocks, and fossils, are the subjects of separate chapters, and include descriptions of what are the important features to draw and describe. Different types of sketch, such as drawings of three-dimensional outcrops, landscapes, thin-sections, and hand-specimens of rocks, crystals, and minerals, are discussed. The methods used to create technical diagrams such as geological maps and cross-sections are also covered. Finally, modern techniques in the acquisition and recording of field data, including photogrammetry and aerial surveys, and digital methods of illustration, are the subject of the final chapter of the book. Throughout, worked examples of field sketches and illustrations are provided as well as descriptions of the common mistakes to be avoided.

scholarly journals Three-Dimensional Thematic Map Imaging of the Yacht Port on the Example of the Polish National Sailing Centre Marina in Gdańsk

2021 ◽  
Vol 11 (15) ◽  
pp. 7016
Author(s):  
Pawel S. Dabrowski ◽  
Cezary Specht ◽  
Mariusz Specht ◽  
Artur Makar
Keyword(s):  
Spatial Data ◽  
Convex Surface ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Future Research ◽  
Two Dimensional ◽  
Thematic Maps ◽  
Research Directions ◽  
Future Research Directions ◽  
The Many

The theory of cartographic projections is a tool which can present the convex surface of the Earth on the plane. Of the many types of maps, thematic maps perform an important function due to the wide possibilities of adapting their content to current needs. The limitation of classic maps is their two-dimensional nature. In the era of rapidly growing methods of mass acquisition of spatial data, the use of flat images is often not enough to reveal the level of complexity of certain objects. In this case, it is necessary to use visualization in three-dimensional space. The motivation to conduct the study was the use of cartographic projections methods, spatial transformations, and the possibilities offered by thematic maps to create thematic three-dimensional map imaging (T3DMI). The authors presented a practical verification of the adopted methodology to create a T3DMI visualization of the marina of the National Sailing Centre of the Gdańsk University of Physical Education and Sport (Poland). The profiled characteristics of the object were used to emphasize the key elements of its function. The results confirmed the increase in the interpretative capabilities of the T3DMI method, relative to classic two-dimensional maps. Additionally, the study suggested future research directions of the presented solution.

Sign in / Sign up

Export Citation Format

Share Document