scholarly journals Utility of 3D printing of left atrial appendages for closure with Watchman Devices and comparison of computed tomography and transesophageal echocardiography based models

2021 ◽  
Vol 9 (37) ◽  
pp. 60-65
Author(s):  
Bernardo Galvan ◽  
Mohammed Ansari ◽  
Ali Akbar Arvandi ◽  
Ronnie Orozco ◽  
Carlos Morales ◽  
...  
Keyword(s):  
Computed Tomography ◽  
3D Printing ◽  
Transesophageal Echocardiography ◽  
Imaging Modality ◽  
Three Dimensional ◽  
3D Models ◽  
Closure Device ◽  
Procedural Approach ◽  
Cardiac Models ◽  
Procedural Planning

Three dimensional (3D) printed cardiac models are useful for WATCHMAN device procedural planning, sizing, and complication reduction. These models also provide accurate representation of dynamic heart anatomy, helping practitioners determine their procedural approach and select proper device sizing. While the efficacy of 3D models obtained from Computed Tomography and Transesophageal Echocardiography over 2D Transesophageal Echocardiography imaging for WATCHMAN procedural planning has been demonstrated, this project aims to directly compare 3D Computed Tomography versus 3D Transesophageal Echocardiography and determine which is more favorable. Computed Tomography and Transesophageal Echocardiography 2D imaging studies from patients that underwent LAA WATCHMAN closure device implantation we used as templates for 3D cardiac models. These 3D models were scored using a 10-point Likert questionnaire. Scoring was conducted by a diverse team that included cardiologists, research specialists, medical students, and 3D printing technicians.  Three dimensional models developed using Computed Tomography demonstrated favorability over 3D models by all qualitative measures. Scoring indicates that Computed Tomography based 3D models are superior tools for WATCHMAN sizing, multi-level medical education, and physician preparedness. To our knowledge, this is the only study that compares 3D models crafted from each imaging modality, and we hope that it encourages future use of 3D modeling techniques based on Computed Tomography scans.

scholarly journals Accuracy of Commonly-Used Imaging Modalities in Assessing Left Atrial Appendage for Interventional Closure: Review Article

2018 ◽  
Vol 7 (11) ◽  
pp. 441 ◽  
Author(s):  
Ramez Morcos ◽  
Haider Al Taii ◽  
Priya Bansal ◽  
Joel Casale ◽  
Rupesh Manam ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Transesophageal Echocardiography ◽  
Left Atrial ◽  
Left Atrial Appendage ◽  
Imaging Modality ◽  
Three Dimensional ◽  
Atrial Appendage ◽  
Imaging Modalities ◽  
Three Dimensional Printing ◽  
Dimensional Printing

Periprocedural imaging assessment for percutaneous Left Atrial Appendage (LAA) transcatheter occlusion can be obtained by utilizing different imaging modalities including fluoroscopy, magnetic resonance imaging (MRI), computed tomography (CT), and ultrasound imaging. Given the complex and variable morphology of the left atrial appendage, it is crucial to obtain the most accurate LAA dimensions to prevent intra-procedural device changes, recapture maneuvers, and prolonged procedure time. We therefore sought to examine the accuracy of the most commonly utilized imaging modalities in LAA occlusion. Institutional Review Board (IRB) approval was waived as we only reviewed published data. By utilizing PUBMED which is an integrated online website to list the published literature based on its relevance, we retrieved thirty-two articles on the accuracy of most commonly used imaging modalities for pre-procedural assessment of the left atrial appendage morphology, namely, two-dimensional transesophageal echocardiography, three-dimensional transesophageal echocardiography, computed tomography, and three-dimensional printing. There is strong evidence that real-time three-dimensional transesophageal echocardiography is more accurate than two-dimensional transesophageal echocardiography. Three-dimensional computed tomography has recently emerged as an imaging modality and it showed exceptional accuracy when merged with three-dimensional printing technology. However, real time three-dimensional transesophageal echocardiography may be considered the preferred imaging modality as it can provide accurate measurements without requiring radiation exposure or contrast administration. We will present the most common imaging modality used for LAA assessment and will provide an algorithmic approach including preprocedural, periprocedural, intraprocedural, and postprocedural.

scholarly journals Three-dimensional printing in adult cardiovascular medicine for surgical and transcatheter procedural planning, teaching and technological innovation

2019 ◽  
Author(s):  
Enrico Ferrari ◽  
Michele Gallo ◽  
Changtian Wang ◽  
Lei Zhang ◽  
Maurizio Taramasso ◽  
...  
Keyword(s):  
3D Printing ◽  
Cardiac Imaging ◽  
Three Dimensional ◽  
3D Models ◽  
Patient Specific ◽  
Digital Information ◽  
Widespread Application ◽  
Mitral Valves ◽  
Materials Used ◽  
Procedural Planning

Abstract Three-dimensional (3D)-printing technologies in cardiovascular surgery have provided a new way to tailor surgical and percutaneous treatments. Digital information from standard cardiac imaging is integrated into physical 3D models for an accurate spatial visualization of anatomical details. We reviewed the available literature and analysed the different printing technologies, the required procedural steps for 3D prototyping, the used cardiac imaging, the available materials and the clinical implications. We have highlighted different materials used to replicate aortic and mitral valves, vessels and myocardial properties. 3D printing allows a heuristic approach to investigate complex cardiovascular diseases, and it is a unique patient-specific technology providing enhanced understanding and tactile representation of cardiovascular anatomies for the procedural planning and decision-making process. 3D printing may also be used for medical education and surgical/transcatheter training. Communication between doctors and patients can also benefit from 3D models by improving the patient understanding of pathologies. Furthermore, medical device development and testing can be performed with rapid 3D prototyping. Additionally, widespread application of 3D printing in the cardiovascular field combined with tissue engineering will pave the way to 3D-bioprinted tissues for regenerative medicinal applications and 3D-printed organs.

Bioprinting in ophthalmology: current advances and future pathways

2019 ◽  
Vol 25 (3) ◽  
pp. 496-514 ◽  
Author(s):  
Nataraj Poomathi ◽  
Sunpreet Singh ◽  
Chander Prakash ◽  
Rajkumar V. Patil ◽  
P.T. Perumal ◽  
...  
Keyword(s):  
3D Printing ◽  
Cardiac Tissue ◽  
Human Life ◽  
Three Dimensional ◽  
3D Models ◽  
Eye Diseases ◽  
Biological Research ◽  
Content Type ◽  
Almost All ◽  
Time Of Operation

Purpose Bioprinting is a promising technology, which has gained a recent attention, for application in all aspects of human life and has specific advantages in different areas of medicines, especially in ophthalmology. The three-dimensional (3D) printing tools have been widely used in different applications, from surgical planning procedures to 3D models for certain highly delicate organs (such as: eye and heart). The purpose of this paper is to review the dedicated research efforts that so far have been made to highlight applications of 3D printing in the field of ophthalmology. Design/methodology/approach In this paper, the state-of-the-art review has been summarized for bioprinters, biomaterials and methodologies adopted to cure eye diseases. This paper starts with fundamental discussions and gradually leads toward the summary and future trends by covering almost all the research insights. For better understanding of the readers, various tables and figures have also been incorporated. Findings The usages of bioprinted surgical models have shown to be helpful in shortening the time of operation and decreasing the risk of donor, and hence, it could boost certain surgical effects. This demonstrates the wide use of bioprinting to design more precise biological research models for research in broader range of applications such as in generating blood vessels and cardiac tissue. Although bioprinting has not created a significant impact in ophthalmology, in recent times, these technologies could be helpful in treating several ocular disorders in the near future. Originality/value This review work emphasizes the understanding of 3D printing technologies, in the light of which these can be applied in ophthalmology to achieve successful treatment of eye diseases.

scholarly journals Three-dimensional (3D) Models Based on Pre-operative Computed Tomography Scans to Personalize the Planned Liver Surgery in Complex Cases

HPB ◽  
2021 ◽  
Vol 23 ◽  
pp. S860-S861
Author(s):  
L. Alaimo ◽  
F. Bagante ◽  
A. Ruzzenente ◽  
M. De Bellis ◽  
S. Conci ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Liver Surgery ◽  
Three Dimensional ◽  
3D Models ◽  
Computed Tomography Scans ◽  
Complex Cases

Mitral Valve Morphology Assessment: Three-Dimensional Transesophageal Echocardiography Versus Computed Tomography

2010 ◽  
Vol 90 (6) ◽  
pp. 1922-1929 ◽  
Author(s):  
Miriam Shanks ◽  
Victoria Delgado ◽  
Arnold C.T. Ng ◽  
Frank van der Kley ◽  
Joanne D. Schuijf ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Mitral Valve ◽  
Transesophageal Echocardiography ◽  
Three Dimensional ◽  
Valve Morphology

scholarly journals 3D Printing Aids Acetabular Reconstruction in Complex Revision Hip Arthroplasty

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Andrew J. Hughes ◽  
Cathal DeBuitleir ◽  
Philip Soden ◽  
Brian O’Donnchadha ◽  
Anthony Tansey ◽  
...  
Keyword(s):  
3D Printing ◽  
Hip Arthroplasty ◽  
Surgical Simulation ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
3D Models ◽  
Tactile Feedback ◽  
Revision Hip Arthroplasty ◽  
Acetabular Reconstruction ◽  
Acetabular Cup

Revision hip arthroplasty requires comprehensive appreciation of abnormal bony anatomy. Advances in radiology and manufacturing technology have made three-dimensional (3D) representation of osseous anatomy obtainable, which provide visual and tactile feedback. Such life-size 3D models were manufactured from computed tomography scans of three hip joints in two patients. The first patient had undergone multiple previous hip arthroplasties for bilateral hip infections, resulting in right-sided pelvic discontinuity and a severe left-sided posterosuperior acetabular deficiency. The second patient had a first-stage revision for infection and recurrent dislocations. Specific metal reduction protocols were used to reduce artefact. The images were imported into Materialise MIMICS 14.12®. The models were manufactured using selective laser sintering. Accurate templating was performed preoperatively. Acetabular cup, augment, buttress, and cage sizes were trialled using the models, before being adjusted, and resterilised, enhancing the preoperative decision-making process. Screw trajectory simulation was carried out, reducing the risk of neurovascular injury. With 3D printing technology, complex pelvic deformities were better evaluated and treated with improved precision. Life-size models allowed accurate surgical simulation, thus improving anatomical appreciation and preoperative planning. The accuracy and cost-effectiveness of the technique should prove invaluable as a tool to aid clinical practice.

Digital Design and 3D Printing of Aortic Arch Reconstruction in HLHS for Surgical Simulation and Training

2018 ◽  
Vol 9 (4) ◽  
pp. 454-458 ◽  
Author(s):  
Sarah A. Chen ◽  
Chin Siang Ong ◽  
Nagina Malguria ◽  
Luca A. Vricella ◽  
Juan R. Garcia ◽  
...  
Keyword(s):  
3D Printing ◽  
Aortic Arch ◽  
Surgical Simulation ◽  
Three Dimensional ◽  
3D Models ◽  
Digital Design ◽  
Patient Specific ◽  
Aortic Arch Reconstruction ◽  
Arch Reconstruction ◽  
And Training

Purpose: Patients with hypoplastic left heart syndrome (HLHS) present a diverse spectrum of aortic arch morphology. Suboptimal geometry of the reconstructed aortic arch may result from inappropriate size and shape of an implanted patch and may be associated with poor outcomes. Meanwhile, advances in diagnostic imaging, computer-aided design, and three-dimensional (3D) printing technology have enabled the creation of 3D models. The purpose of this study is to create a surgical simulation and training model for aortic arch reconstruction. Description: Specialized segmentation software was used to isolate aortic arch anatomy from HLHS computed tomography scan images to create digital 3D models. Three-dimensional modeling software was used to modify the exported segmented models and digitally design printable customized patches that were optimally sized for arch reconstruction. Evaluation: Life-sized models of HLHS aortic arch anatomy and a digitally derived customized patch were 3D printed to allow simulation of surgical suturing and reconstruction. The patient-specific customized patch was successfully used for surgical simulation. Conclusions: Feasibility of digital design and 3D printing of patient-specific patches for aortic arch reconstruction has been demonstrated. The technology facilitates surgical simulation. Surgical training that leads to an understanding of optimal aortic patch geometry is one element that may potentially influence outcomes for patients with HLHS.

scholarly journals Methods building and printing 3D models historical architectural objects

2020 ◽  
Vol 75 ◽  
pp. 04016 ◽  
Author(s):  
Ihor Hevko ◽  
Olha Potapchuk ◽  
Iryna Lutsyk ◽  
Viktorya Yavorska ◽  
Viktoriia Tkachuk
Keyword(s):  
3D Printing ◽  
Complex Systems ◽  
Three Dimensional ◽  
3D Models ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Specialized Software ◽  
Bulk Data ◽  
Three Dimensional Models ◽  
Accuracy Speed

The authors present methods building and printing three-dimensional models for graphical reconstruction of historical architectural objects. Procedure sequence of the methods is exemplified through building the model of the Parochial Cathedral of St. Mary of the Perpetual Assistance of the 1950s. After analyzing and assessing the most popular specialized software means, the 3DS Max environment is chosen to build a three-dimensional model. Suggested software tools enable increased accuracy, speed and granularity of fixation of complex systems and expanded databases, providing efficient instruments to deal with bulk data and being relevant to new IT achievements. Sequence and content of operations for analytical and modeling cycles are substantiated. The cathedral model is built on the basis of archive photographs and drafts. The authors describe methods and the algorithm of procedures, principles of architectural and spacious modeling to recreate the architectural object. The three-dimensional model is built by applying a stereogram miniature of the destroyed Cathedral. Reconstruction of spacious configuration of the objects is based on parallax assessment of images. Stages of project implementation are determined. There are described methods of implementing modeling by 3DS Max tools and preparing the model for 3D printing in Cura.

Sign in / Sign up

Export Citation Format

Share Document