917 Vortex Shedding Frequency of Finned Tube Bundles with Staggered Arrangement

2000 ◽  
Vol 2000.37 (0) ◽  
pp. 369-370
Author(s):  
Ken-ichi OKUI ◽  
Makio IWABUCHI ◽  
Yukihide KATO ◽  
Yasutaka KAWABE
Keyword(s):  
Vortex Shedding ◽  
Finned Tube ◽  
Tube Bundles ◽  
Staggered Arrangement ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

scholarly journals Characteristics of Vortex-Shedding Frequency in Serrated Finned Tube Banks : Effects of Finned Tube Shapes and Its Sizes

2002 ◽  
Vol 2002.39 (0) ◽  
pp. 111-112
Author(s):  
Kenichi OKUI ◽  
Kiyoshi KAWAGUCHI ◽  
Yasutaka KAWABE ◽  
Junya MORISHITA ◽  
Li XIAO
Keyword(s):  
Vortex Shedding ◽  
Finned Tube ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Tube Banks

Equivalent Diameter for Predicting Vortex Shedding of Finned Cylinders in Cross-Flow

2021 ◽  
Author(s):  
Mohammed Alziadeh ◽  
Atef Mohany
Keyword(s):  
Vortex Shedding ◽  
Tube Bundle ◽  
Cross Flow ◽  
Acoustic Resonance ◽  
Finned Tube ◽  
Resonance Excitation ◽  
Equivalent Diameter ◽  
Frequency Scaling ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

Abstract This article explores different equivalent diameter equations found in the literature for shedding frequency scaling and applying it to various types of finned cylinders in industrial heat exchangers. The focus is on three finned cylinder types: straight, twist-serrated, and crimped spirally finned cylinders. Within each finned cylinder category, at least three different finned cylinders are investigated. The results indicate that utilizing the appropriate equivalent diameter for vortex shedding frequency scaling collapses the data within the Strouhal bounds of a bare cylinder away from resonance excitation. However, the onset of flow-excited acoustic resonance and peak acoustic pressure in all the finned cylinder cases occur at a reduced flow velocity earlier than their equivalent diameter bare cylinder. This suggests that although utilizing the appropriate equivalent diameter can predict the shedding frequency away from resonance, it cannot be used in velocity scaling to predict the onset of acoustic resonance in finned tube bundle.

The Influence of Boundary Layer Velocity Gradients and Bed Proximity on Vortex Shedding From Free Spanning Pipelines

1984 ◽  
Vol 106 (1) ◽  
pp. 70-78 ◽  
Author(s):  
A. J. Grass ◽  
P. W. J. Raven ◽  
R. J. Stuart ◽  
J. A. Bray
Keyword(s):  
Boundary Layer ◽  
Strouhal Number ◽  
Vortex Shedding ◽  
Combined Effects ◽  
Maximum Increase ◽  
Velocity Gradients ◽  
Large Velocity ◽  
Layer Velocity ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

The paper summarizes the results of a laboratory study of the separate and combined effects of bed proximity and large velocity gradients on the frequency of vortex shedding from pipeline spans immersed in the thick boundary layers of tidal currents. This investigation forms part of a wider project concerned with the assessment of span stability. The measurements show that in the case of both sheared and uniform approach flows, with and without velocity gradients, respectively, the Strouhal number defining the vortex shedding frequency progressively increases as the gap between the pipe base and the bed is reduced below two pipe diameters. The maximum increase in vortex shedding Strouhal number, recorded close to the bed in an approach flow with large velocity gradients, was of the order of 25 percent.

An Experimental Study on the Vertical Flow Past a Finite-Length Horizontal Cylinder at Low Reynolds Numbers

2014 ◽  
Vol 493 ◽  
pp. 68-73 ◽  
Author(s):  
Willy Stevanus ◽  
Yi Jiun Peter Lin
Keyword(s):  
Finite Length ◽  
Vortex Shedding ◽  
Vortex Formation ◽  
Reynolds Numbers ◽  
Horizontal Cylinder ◽  
Vortex Street ◽  
Vertical Flow ◽  
Low Reynolds Numbers ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

The research studies the characteristics of the vertical flow past a finite-length horizontal cylinder at low Reynolds numbers (ReD) from 250 to 1080. The experiments were performed in a vertical closed-loop water tunnel. Flow fields were observed by the particle tracer approach for flow visualization and measured by the Particle Image Velocimetry (P.I.V.) approach for velocity fields. The characteristics of vortex formation in the wake of the finite-length cylinder change at different regions from the tip to the base of it. Near the tip, a pair of vortices in the wake was observed and the size of the vortex increased as the observed section was away from the tip. Around a distance of 3 diameters of the cylinder from its tip, the vortex street in the wake was observed. The characteristics of vortex formation also change with increasing Reynolds numbers. At X/D = -3, a pair of vortices was observed in the wake for ReD = 250, but as the ReD increases the vortex street was observed at the same section. The vortex shedding frequency is analyzed by Fast Fourier Transform (FFT). Experimental results show that the downwash flow affects the vortex shedding frequency even to 5 diameters of the cylinder from its tip. The interaction between the downwash flow and the Von Kármán vortex street in the wake of the cylinder is presented in this paper.

Vortex-Induced Vibration for Heat Transfer Enhancement

2014 ◽  
Author(s):  
Junxiang Shi ◽  
Steven R. Schafer ◽  
Chung-Lung (C. L. ) Chen
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Heat Transfer Enhancement ◽  
Natural Frequency ◽  
Vortex Shedding ◽  
Pressure Loss ◽  
Thermal Boundary Layer ◽  
Transfer Enhancement ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

A passive, self-agitating method which takes advantage of vortex-induced vibration (VIV) is presented to disrupt the thermal boundary layer and thereby enhance the convective heat transfer performance of a channel. A flexible cylinder is placed at centerline of a channel. The vortex shedding due to the presence of the cylinder generates a periodic lift force and the consequent vibration of the cylinder. The fluid-structure-interaction (FSI) due to the vibration strengthens the disruption of the thermal boundary layer by reinforcing vortex interaction with the walls, and improves the mixing process. This novel concept is demonstrated by a three-dimensional modeling study in different channels. The fluid dynamics and thermal performance are discussed in terms of the vortex dynamics, disruption of the thermal boundary layer, local and average Nusselt numbers (Nu), and pressure loss. At different conditions (Reynolds numbers, channel geometries, material properties), the channel with the VIV is seen to significantly increase the convective heat transfer coefficient. When the Reynolds number is 168, the channel with the VIV improves the average Nu by 234.8% and 51.4% in comparison with a clean channel and a channel with a stationary cylinder, respectively. The cylinder with the natural frequency close to the vortex shedding frequency is proved to have the maximum heat transfer enhancement. When the natural frequency is different from the vortex shedding frequency, the lower natural frequency shows a higher heat transfer rate and lower pressure loss than the larger one.

Applicability of The Equivalent Diameter Approach to Estimate Vortex Shedding Frequency and Acoustic Resonance Excitation From Different Finned Cylinders In Cross-Flow

2021 ◽  
Author(s):  
Mohammed Alziadeh ◽  
Atef Mohany
Keyword(s):  
Strouhal Number ◽  
Vortex Shedding ◽  
Interaction Mechanism ◽  
Acoustic Resonance ◽  
Resonance Excitation ◽  
Equivalent Diameter ◽  
Effective Diameter ◽  
Finned Tubes ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency

Abstract This article explores the applicability of utilizing different equivalent diameter (Deq) equations to estimate the vortex shedding frequency and onset of self-excited acoustic resonance for various types of finned cylinders. The focus is on three finned cylinder types that are commonly used in industrial heat exchangers: straight, twist-serrated, and crimped spirally finned cylinders. Within each type of fins, at least three different finned cylinders are investigated. The results indicate that at off-resonance conditions, utilizing the appropriate equivalent diameter collapses the Strouhal number data within the typical Strouhal number variations of an equivalent diameter circular, bare cylinder. However, when acoustic resonance is initiated, the onset and the peak of resonance excitation in all of the finned cylinder cases generally occurred at a reduced flow velocity earlier than that observed from their equivalent diameter bare cylinders. This suggests that although utilizing the appropriate equivalent diameter can reasonably estimate the vortex shedding frequency away from acoustic resonance excitation, it cannot be used to predict the onset of acoustic resonance in finned tubes. The findings of this study indicate that the effective diameter approach is not sufficient to capture the intrinsic changes in the flow-sound interaction mechanism as a result of adding fins to a bare cylinder. Thus, a revision of the acoustic Strouhal number charts is required for finned tubes of different types and arrangements.

Flow past a rotationally oscillating cylinder

2013 ◽  
Vol 735 ◽  
pp. 307-346 ◽  
Author(s):  
S. Kumar ◽  
C. Lopez ◽  
O. Probst ◽  
G. Francisco ◽  
D. Askari ◽  
...  
Keyword(s):  
Reynolds Number ◽  
Vortex Shedding ◽  
Three Dimensional ◽  
Far Field ◽  
Two Dimensional ◽  
Flow Past ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Flow Visualizations ◽  
Hydrogen Bubble Technique

AbstractFlow past a circular cylinder executing sinusoidal rotary oscillations about its own axis is studied experimentally. The experiments are carried out at a Reynolds number of 185, oscillation amplitudes varying from $\mathrm{\pi} / 8$ to $\mathrm{\pi} $, and at non-dimensional forcing frequencies (ratio of the cylinder oscillation frequency to the vortex-shedding frequency from a stationary cylinder) varying from 0 to 5. The diagnostic is performed by extensive flow visualization using the hydrogen bubble technique, hot-wire anemometry and particle-image velocimetry. The wake structures are related to the velocity spectra at various forcing parameters and downstream distances. It is found that the phenomenon of lock-on occurs in a forcing frequency range which depends not only on the amplitude of oscillation but also the downstream location from the cylinder. The experimentally measured lock-on diagram in the forcing amplitude and frequency plane at various downstream locations ranging from 2 to 23 diameters is presented. The far-field wake decouples, after the lock-on at higher forcing frequencies and behaves more like a regular Bénard–von Kármán vortex street from a stationary cylinder with vortex-shedding frequency mostly lower than that from a stationary cylinder. The dependence of circulation values of the shed vortices on the forcing frequency reveals a decay character independent of forcing amplitude beyond forcing frequency of ${\sim }1. 0$ and a scaling behaviour with forcing amplitude at forcing frequencies ${\leq }1. 0$. The flow visualizations reveal that the far-field wake becomes two-dimensional (planar) near the forcing frequencies where the circulation of the shed vortices becomes maximum and strong three-dimensional flow is generated as mode shape changes in certain forcing parameter conditions. It is also found from flow visualizations that even at higher Reynolds number of 400, forcing the cylinder at forcing amplitudes of $\mathrm{\pi} / 4$ and $\mathrm{\pi} / 2$ can make the flow field two-dimensional at forcing frequencies greater than ${\sim }2. 5$.

Vortex Shedding Induced Dynamic Response of Marine Risers

1984 ◽  
Vol 106 (2) ◽  
pp. 214-221 ◽  
Author(s):  
F. Rajabi ◽  
M. F. Zedan ◽  
A. Mangiavacchi
Keyword(s):  
Dynamic Response ◽  
Vortex Shedding ◽  
Equation Of Motion ◽  
Continuous Beam ◽  
Regular Waves ◽  
Empirical Correlations ◽  
Fluid Resistance ◽  
Vortex Shedding Frequency ◽  
Shedding Frequency ◽  
Lock In

An analytical model to predict the dynamic response of a riser in regular waves or in current to vortex shedding-induced lift forces is described. The riser is treated as a continuous beam under tension. A modal superposition scheme is used to solve the linearized equation of motion in the frequency domain. The excitation lift force is represented by a harmonic function with a frequency equal to the dominant vortex shedding frequency. Empirical correlations are used to determine the lift coefficients and shedding frequencies along the riser. Lift amplification is considered at or near the “lock-in” conditions. The fluid resistance to riser oscillations is represented by a Morison’s equation-type expression.

Sign in / Sign up

Export Citation Format

Share Document