EFFECT OF SUPPRESSION POOL CONDITIONS ON RISING BUBBLE PARAMETERS DURING WETWELL VENTING

2019 ◽  
Vol 2019.27 (0) ◽  
pp. 2300
Author(s):  
Giedre Zablackaite ◽  
Hideo Nagasaka ◽  
Hideharu Takahashi ◽  
Hiroshige Kikura
Keyword(s):  
Rising Bubble ◽  
Suppression Pool

Interaction Between Multiple Solid Objects and Bubbles

2010 ◽  
Author(s):  
Ryuichi Iwata ◽  
Takeo Kajishima ◽  
Shintaro Takeuchi
Keyword(s):  
Numerical Method ◽  
Volume Of Fluid ◽  
Solid Particles ◽  
Immersed Boundary ◽  
Particle Interactions ◽  
Volume Of Fluid Method ◽  
Rising Bubble ◽  
Solid Objects ◽  
Multiple Particles ◽  
Particle Laden Flows

In the present study, bubble-particle interactions in suspensions are investigated by a coupled immersed-boundary and volume-of-fluid method (IB-VOF method), which is proposed by the present authors. The validity of the numerical method is examined through simulations of a rising bubble in a liquid and a falling particle in a liquid. Dilute particle-laden flows and a gas-liquid-solid flow involving solid particles and bubbles of comparable sizes to one another (Db/Dp = 1) are simulated. Drag coefficients of particles in particle-laden flows are estimated and flow fields involving multiple particles and a bubble are demonstrated.

scholarly journals A numerical study of gravity-driven instability in strongly coupled dusty plasma. Part 1. Rayleigh–Taylor instability and buoyancy-driven instability

2021 ◽  
Vol 87 (2) ◽  
Author(s):  
Vikram S. Dharodi ◽  
Amita Das
Keyword(s):  
Dusty Plasma ◽  
Numerical Study ◽  
Fluid Model ◽  
Density Region ◽  
Strongly Coupled ◽  
Rising Bubble ◽  
Inhomogeneous Density ◽  
Gravity Driven ◽  
The Individual ◽  
Strongly Coupled Dusty Plasma

Rayleigh–Taylor (RT) and buoyancy-driven (BD) instabilities are driven by gravity in a fluid system with inhomogeneous density. The paper investigates these instabilities for a strongly coupled dusty plasma medium. This medium has been represented here in the framework of the generalized hydrodynamics (GHD) fluid model which treats it as a viscoelastic medium. The incompressible limit of the GHD model is considered here. The RT instability is explored both for gradual and sharp density gradients stratified against gravity. The BD instability is discussed by studying the evolution of a rising bubble (a localized low-density region) and a falling droplet (a localized high-density region) in the presence of gravity. Since both the rising bubble and falling droplet have symmetry in spatial distribution, we observe that a falling droplet process is equivalent to a rising bubble. We also find that both the gravity-driven instabilities get suppressed with increasing coupling strength of the medium. These observations have been illustrated analytically as well as by carrying out two-dimensional nonlinear simulations. Part 2 of this paper is planned to extend the present study of the individual evolution of a bubble and a droplet to their combined evolution in order to understand the interaction between them.

An axisymmetric multiphase SPH model for the simulation of rising bubble

2020 ◽  
Vol 366 ◽  
pp. 113039
Author(s):  
Ming-Kang Li ◽  
A-Man Zhang ◽  
Fu-Ren Ming ◽  
Peng-Nan Sun ◽  
Yu-Xiang Peng
Keyword(s):  
Rising Bubble ◽  
Sph Model

SIMULATION OF AN AXISYMMETRIC RISING BUBBLE BY A MULTIPLE RELAXATION TIME LATTICE BOLTZMANN METHOD

2009 ◽  
Vol 23 (24) ◽  
pp. 4907-4932 ◽  
Author(s):  
ABBAS FAKHARI ◽  
MOHAMMAD HASSAN RAHIMIAN
Keyword(s):  
Free Surface ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Rise Velocity ◽  
Rising Bubble ◽  
Wide Range ◽  
Theoretical Predictions ◽  
Multiple Relaxation Time ◽  
Bubble Rising ◽  
Boltzmann Method

In this paper, the lattice Boltzmann method is employed to simulate buoyancy-driven motion of a single bubble. First, an axisymmetric bubble motion under buoyancy force in an enclosed duct is investigated for some range of Eötvös number and a wide range of Archimedes and Morton numbers. Numerical results are compared with experimental data and theoretical predictions, and satisfactory agreement is shown. It is seen that increase of Eötvös or Archimedes number increases the rate of deformation of the bubble. At a high enough Archimedes value and low Morton numbers breakup of the bubble is observed. Then, a bubble rising and finally bursting at a free surface is simulated. It is seen that at higher Archimedes numbers the rise velocity of the bubble is greater and the center of the free interface rises further. On the other hand, at high Eötvös values the bubble deforms more and becomes more stretched in the radial direction, which in turn results in lower rise velocity and, hence, lower elevations for the center of the free surface.

Mixing of Matter by a Rising Bubble Near a Wall

2011 ◽  
Author(s):  
Toru Koso ◽  
Hiroyuki Iwashita ◽  
Fumihiko Usuki
Keyword(s):  
Large Scale ◽  
Uv Light ◽  
Fluid Motion ◽  
Turbulent Diffusion Coefficient ◽  
Air Bubble ◽  
Rising Bubble ◽  
Mass Dispersion ◽  
Mixing Patterns ◽  
Bubble Rising ◽  
Near Wall

The turbulent mixing of liquid mass caused by an air bubble rising near a wall in a still liquid in a pipe is investigated experimentally using a photochromic dye. A part of the liquid is activated by UV light and subjected to the fluid motion caused by a zigzag rising bubble of which Reynolds number is 214. The visualized mixing patterns showed that the dye is mixed by vortex motions in the bubble wake that is similar to the case of a bubble rising in the center of the pipe. The concentration distributions were deduced from the dye images using Lambert-Beer’s law and the turbulent diffusion coefficient (TDC) was evaluated from the temporal changes in the mass dispersion. The TDCs showed that a near-wall bubble generates stronger mixing than for a bubble in the center of the pipe. This stronger mixing can be attributed to the large-scale vortices observed for a near-wall bubble, which remains active for a longer time due to the lack of oppositely rotating vortices and mixes more fluids.

A rising bubble in a tube

1990 ◽  
Vol 2 (4) ◽  
pp. 542-546 ◽  
Author(s):  
Herbert Levine ◽  
Yumin Yang
Keyword(s):  
Rising Bubble

Research on Deposition of Micro-Nano Aerosols in Rising Bubble Under Pool Scrubbing Condition

2018 ◽  
Author(s):  
Yanmin Zhou ◽  
Haifeng Gu ◽  
Qiunan Sun ◽  
Zhongning Sun ◽  
Jiqiang Su ◽  
...  
Keyword(s):  
Flow Rate ◽  
Gas Flow ◽  
Bubbly Flow ◽  
Aerosol Deposition ◽  
Deposition Efficiency ◽  
Filtration Efficiency ◽  
Liquid Level ◽  
Gas Flow Rate ◽  
Reactor Accident ◽  
Rising Bubble

Aerosols as the main component of radioactive products in migration performance, which is an important factor that a unclear reactor accident present strong diffusion and affects the distributions of source and dose level in reactor containment, and they are therefore expected to be deposited in liquid phase such as in suspension pool and filtered containment venting device. In this paper, the deposition characteristics of micro-nano aerosols in rising bubble under pool scrubbing condition is studied with experiment, the aerosols size in the research range from 20 nm to 600 nm, and the bubble morphology mainly concern homogeneous bubbly flow. The results show that the deposition efficiency and mechanism of aerosol closely relate to gas flow rate, liquid level, particle size and bubbles size and so on. The aerosol deposition near 85nm is proved most difficult because of the convert of deposition mechanisms. In a high liquid level condition, micro-nano aerosol filtration efficiency is enhanced but gradually gradual. Under different gas flow rate, air bubble residence time and the bubble size distributions affect the filtration efficiency of aerosols.

Sign in / Sign up

Export Citation Format

Share Document