A-2-2 Model-based Development of High Precision Control System for Mechanical Characteristic Variation

Author(s):  
Hironori OGAWA ◽  
Masahiro KOYAMA ◽  
Takashi KOBAYASHI ◽  
Masaki MIZUOCHI
2011 ◽  
Vol 15 ◽  
pp. 573-577 ◽  
Author(s):  
Chen Song ◽  
Wang Lei ◽  
Xu YeFeng

2011 ◽  
Vol 317-319 ◽  
pp. 1711-1716
Author(s):  
Lei Zhou ◽  
Jian Gang Li ◽  
Ze Xiang Li

A bond head with spring bearing has steady-state error problem in position loop control. To maintain high speed and high precision control, a spring force compensator is proposed in this paper. Firstly, the system is modeled and the problem is stated. Then, a close loop identification method for the spring force is advised. The compensator is also modeled and compared with the traditional controller. In the experiment part, the result shows the new control system with spring force compensator works well.


2012 ◽  
Vol 503-504 ◽  
pp. 1343-1346
Author(s):  
Zhong Jin Ni ◽  
Liang Fang ◽  
Mao Jun Chen

A digital control system of high-precision carving machine is presented in this paper. According to the requirements of high-precision caving machine, a servo motor controller based on the field orientated control (FOC) strategy is applied. Thus the high-precision control system base on DSP of electronic carving machine is realized. The results of system operation are shown that the control system and the servo motor controllers can run steadily and precisely. The system also represent that inter - connected controls parameters of this system were correct and valid, the control method was proper and effective


2014 ◽  
Vol 494-495 ◽  
pp. 1462-1467
Author(s):  
Rong Li ◽  
Hai Qiao ◽  
Chi Zhang ◽  
Wen Tai Qu ◽  
You Yong Liao

The paper propose an outer-rotor permanent magnet synchronous motor (PMSM) with peak torque of 3000N.m. The position measuring system based on CPLD and dual magnetic sensor is developed. This system can handle two channel signals obtained from two sensor heads, and provides correct and reliable position feedback signals for the motor control. According to the mathematical model of the PMSM, full digital high precision control system with triple feedback closed loops are designed and implemented in experimental evaluation. The test results validate that the system is feasible and the control precision can reach 1.5 arc-second.


2012 ◽  
Vol 490-495 ◽  
pp. 1650-1654
Author(s):  
Xiao Ding Gao ◽  
Zhao Ming Nie ◽  
Yuan Chao Li ◽  
Jia Jia Wang

The multi AC servomotor synchronous operation control system based on DSP+FPGA and a new intelligent PI controller have been designed. The intelligent PI controller can change the structure of controller and parameters dynamically according to the running status of the system, which improves the dynamic performance of the speed control system. In terms of the condition without loading, the experiments about four AC servomotors in different revolving speed have been implemented and The results of experiments show that the system can achieve the high precision control of the operation of multiple AC servomotors synchronously.


2020 ◽  
Vol 140 (4) ◽  
pp. 272-280
Author(s):  
Wataru Ohnishi ◽  
Hiroshi Fujimoto ◽  
Koichi Sakata

Sign in / Sign up

Export Citation Format

Share Document