Failure Analysis of Bamboo Bolt Connection in Uniaxial Tension by FEM by Considering Fiber Direction

2021 ◽  
Vol 71 (1) ◽  
pp. 58-64
Author(s):  
Raviduth Ramful
Keyword(s):  
Finite Element ◽  
Uniaxial Tension ◽  
Failure Modes ◽  
Damage Mechanism ◽  
Field Analysis ◽  
Fiber Direction ◽  
Element Formulation ◽  
Element Analysis ◽  
Test Standards ◽  
Lack Of Information

Abstract Full-culm bamboo has been used for millennia in construction. Specific connections are normally required to suit its unique morphology and nonuniform structure. Presently, the use of full-culm bamboo is limited in the construction industry as a result of a lack of information and test standards about the use and evaluation of full-culm connections. This study aims to further explore this area by investigating the failure modes in bamboo bolt connections in uniaxial tension by considering fiber direction in finite element analysis. Three types of bolt configurations of varying permutations, namely, single, dual, and orthogonal, were investigated. An orthotropic material was used as a constitutive model in finite element formulation to capture the inhomogeneity prevailing in bamboo culm. From the strain-field analysis of a hollow-inhomogeneous model representing bamboo, shear-out failure was dominant, as a localized area equivalent to the bolt diameter was affected due to high material orthotropy with high axial strength but weak radial and tangential strength. Bearing failure is assumed to precede shear-out failure at the bolt–bamboo contact interface, as the embedding strength was affected by localized strain concentration. The strain distribution in various bolt arrangements was found to vary between bolted connections of inhomogeneous-hollow geometry of bamboo and the ones of inhomogeneous-solid geometry representing timber. The observation in this study highlights the need for alternative design criteria to specifically assess the damage mechanism in bamboo connections.

Punch shear performance and damage mechanisms of three-dimensional braided composite with different thicknesses

2018 ◽  
Vol 89 (11) ◽  
pp. 2126-2141
Author(s):  
Yuanyuan Li ◽  
Bohong Gu ◽  
Baozhong Sun ◽  
Zhijuan Pan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Failure Modes ◽  
Split Hopkinson Pressure Bar ◽  
Three Dimensional ◽  
Damage Mechanism ◽  
Specimen Thickness ◽  
Analysis Model ◽  
Hopkinson Pressure Bar ◽  
Element Analysis

In this study, the punch shear properties and damage mechanism of three-dimensional braided carbon/epoxy composites with different thicknesses are investigated both experimentally and numerically. Three kinds of specimen thickness are prepared: 3 mm, 5 mm, and 8 mm. A modified split Hopkinson pressure bar with a specially designed punch shear fixture are used to conduct the punch shear tests. The results indicate that the punch shear modulus increases along with the specimen thickness, whereas the peak punch stress shows insensitivity to the change in thickness. The specific energy absorption decreases with an increase in thickness due to a reduction in composite damage. Moreover, the dominant failure modes under punch shear loadings are discussed through SEM examinations and finite element analysis. The results show a high level of agreement between the experimental and finite element analysis models. Particularly, the finite element analysis model simulates the punch shear damage evolution at various high strain rates. Both the stress distribution and stress propagation process are also investigated in the model. It is found that a low-stress zone appeared in the punch region and the zone area decreases as the thickness increases.

scholarly journals Design and analysis of concrete-filled tubular flange girders under combined loading

2021 ◽  
pp. 136943322110015
Author(s):  
Rana Al-Dujele ◽  
Katherine Ann Cashell
Keyword(s):  
Finite Element ◽  
Axial Force ◽  
Failure Modes ◽  
Numerical Study ◽  
Combined Loading ◽  
Torsional Stiffness ◽  
Fe Model ◽  
Combined Effects ◽  
Element Analysis ◽  
Hollow Section

This paper is concerned with the behaviour of concrete-filled tubular flange girders (CFTFGs) under the combination of bending and tensile axial force. CFTFG is a relatively new structural solution comprising a steel beam in which the compression flange plate is replaced with a concrete-filled hollow section to create an efficient and effective load-carrying solution. These members have very high torsional stiffness and lateral torsional buckling strength in comparison with conventional steel I-girders of similar depth, width and steel weight and are there-fore capable of carrying very heavy loads over long spans. Current design codes do not explicitly include guidance for the design of these members, which are asymmetric in nature under the combined effects of tension and bending. The current paper presents a numerical study into the behaviour of CFTFGs under the combined effects of positive bending and axial tension. The study includes different loading combinations and the associated failure modes are identified and discussed. To facilitate this study, a finite element (FE) model is developed using the ABAQUS software which is capable of capturing both the geometric and material nonlinearities of the behaviour. Based on the results of finite element analysis, the moment–axial force interaction relationship is presented and a simplified equation is proposed for the design of CFTFGs under combined bending and tensile axial force.

Design and Analysis of Viscoelastic Seismic Dampers

2002 ◽  
Author(s):  
N. Shimizu ◽  
H. Nasuno ◽  
T. Yazaki ◽  
K. Sunakoda
Keyword(s):  
Finite Element ◽  
Constitutive Relation ◽  
Time Domain ◽  
Dynamic Properties ◽  
Design Procedure ◽  
Fe Analysis ◽  
Damping Capacity ◽  
Element Formulation ◽  
Element Analysis ◽  
Equivalent Viscous Damping

This paper describes a methodology of design and analysis of viscoelastic seismic dampers by means of the time domain finite element analysis. The viscoelastic constitutive relation of material incorporating with the fractional calculus has been derived and the finite element formulation based on the constitutive relation has been developed to analyze the dynamic property of seismic damper. A time domain computer program was developed by using the formulation. Dynamic properties of hysteresis loop, damping capacity, equivalent viscous damping coefficient, and equivalent spring constant are calculated and compared with the experimental results. Remarkable correlation between the FE analysis and the experiment is gained, and consequently the design procedure with the help of the FE analysis has been established.

scholarly journals Simulation of thermal cycle aging process on fiber-reinforced polymers by extended finite element method

2017 ◽  
Vol 52 (14) ◽  
pp. 1947-1958 ◽  
Author(s):  
Sergio González ◽  
Gianluca Laera ◽  
Sotiris Koussios ◽  
Jaime Domínguez ◽  
Fernando A Lasagni
Keyword(s):  
Finite Element ◽  
Degradation Process ◽  
Damage Mechanism ◽  
Fiber Reinforced Polymers ◽  
Model Parameters ◽  
Suitable Model ◽  
Fiber Reinforced ◽  
Aging Effects ◽  
Extended Finite Element ◽  
Element Analysis

The simulation of long life behavior and environmental aging effects on composite materials are subjects of investigation for future aerospace applications (i.e. supersonic commercial aircrafts). Temperature variation in addition to matrix oxidation involves material degradation and loss of mechanical properties. Crack initiation and growth is the main damage mechanism. In this paper, an extended finite element analysis is proposed to simulate damage on carbon fiber reinforced polymer as a consequence of thermal fatigue between −50℃ and 150℃ under atmospheres with different oxygen content. The interphase effect on the degradation process is analyzed at a microscale level. Finally, results are correlated with the experimental data in terms of material stiffness and, hence, the most suitable model parameters are selected.

Finite-Element Analysis of the Magnetostatic Field of a Coaxial Magnetic Gear Device

2015 ◽  
Vol 764-765 ◽  
pp. 289-293
Author(s):  
Yi Chang Wu ◽  
Han Ting Hsu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Magnetic Flux ◽  
High Speed ◽  
Field Analysis ◽  
Element Analysis ◽  
Magnetostatic Field ◽  
Speed Reduction ◽  
Dimensional Finite Element ◽  
Magnetic Gear

This paper presents the magnetostatic field analysis of a coaxial magnetic gear device proposed by Atallah and Howe. The structural configuration and speed reduction ratio of this magnetic gear device are introduced. The 2-dimensional finite-element analysis (2-D FEA), conducted by applying commercial FEA software Ansoft/Maxwell, is performed to evaluate the magnetostatic field distribution, especially for the magnetic flux densities within the outer air-gap. Once the number of steel pole-pieces equals the sum of the pole-pair numbers of the high-speed rotor and the low-speed rotor, the coaxial magnetic gear device possesses higher magnetic flux densities, thereby generating greater transmitted torque.

FINITE ELEMENT ANALYSIS OF PIEZOELECTRIC ELASTICITY WITH SINGULAR INPLANE ELECTROELASTIC FIELDS

2006 ◽  
Vol 03 (01) ◽  
pp. 115-135 ◽  
Author(s):  
MENG-CHENG CHEN ◽  
JIAN-JUN ZHU ◽  
K. Y. SZE
Keyword(s):  
Finite Element ◽  
Ad Hoc ◽  
Wedge Angle ◽  
Electric Displacement ◽  
Weak Form ◽  
Efficient Solutions ◽  
Element Formulation ◽  
Displacement Fields ◽  
Element Analysis ◽  
Electroelastic Fields

An ad hoc one-dimensional finite element formulation is developed for the eigenanalysis of inplane singular electroelastic fields at material and geometric discontinuities in piezoelectric elastic materials by using the eigenfunction expansion procedure and the weak form of the governing equations for prismatic sectorial domains composed of piezoelectrics, composites or air. The order of the electroelastic singularities and the angular variation of the stress and electric displacement fields are obtained with the formulation. The influence of wedge angle, polarization orientation, material types, and boundary and interface conditions on the singular electroelastic fields and the order of their singularity are also examined. The simplicity and accuracy of the formulation are demonstrated by comparison to several analytical solutions for piezoelectric and composite multi-material wedges. The nature and speed of convergence suggests that the present eigensolution could be used in developing hybrid elements for use along with standard elements to yield accurate and computationally efficient solutions to problems having complex global geometries leading to singular electroelastic states.

TTK Chitra tilting disc heart valve model TC2: An assessment of fatigue life and durability

2017 ◽  
Vol 231 (8) ◽  
pp. 758-765 ◽  
Author(s):  
NN Subhash ◽  
Adathala Rajeev ◽  
Sreedharan Sujesh ◽  
CV Muraleedharan
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Fatigue Life ◽  
Heart Valve ◽  
Life Prediction ◽  
Heart Valves ◽  
Failure Modes ◽  
Fatigue Life Prediction ◽  
Element Analysis ◽  
Valve Model

Average age group of heart valve replacement in India and most of the Third World countries is below 30 years. Hence, the valve for such patients need to be designed to have a service life of 50 years or more which corresponds to 2000 million cycles of operation. The purpose of this study was to assess the structural performance of the TTK Chitra tilting disc heart valve model TC2 and thereby address its durability. The TC2 model tilting disc heart valves were assessed to evaluate the risks connected with potential structural failure modes. To be more specific, the studies covered the finite element analysis–based fatigue life prediction and accelerated durability testing of the tilting disc heart valves for nine different valve sizes. First, finite element analysis–based fatigue life prediction showed that all nine valve sizes were in the infinite life region. Second, accelerated durability test showed that all nine valve sizes remained functional for 400 million cycles under experimental conditions. The study ensures the continued function of TC2 model tilting disc heart valves over duration in excess of 50 years. The results imply that the TC2 model valve designs are structurally safe, reliable and durable.

The Finite Element Analysis of Dynamic Interaction of High-Speed Shinkansen, the Rail, and Bridge

1993 ◽  
Author(s):  
Makoto Tanabe ◽  
Hajime Wakui ◽  
Nobuyuki Matsumoto
Keyword(s):  
Finite Element ◽  
Dynamic Response ◽  
High Speed ◽  
Response Analysis ◽  
Element Formulation ◽  
Element Analysis ◽  
Finite Element Program ◽  
The Finite Element Analysis ◽  
Element Program ◽  
The Impact

Abstract A finite element formulation to solve the dynamic behavior of high-speed Shinkansen cars, rail, and bridge is given. A mechanical model to express the interaction between wheel and rail is described, in which the impact of the rail on the flange of wheel is also considered. The bridge is modeled by using various finite elements such as shell, beam, solid, spring, and mass. The equations of motions of bridge and Shinkansen cars are solved under the constitutive and constraint equations to express the interaction between rail and wheel. Numerical method based on a modal transformation to get the dynamic response effectively is discussed. A finite element program for the dynamic response analysis of Shinkansen cars, rail, and bridge at the high-speed running has been developed. Numerical examples are also demonstrated.

Finite Element Analysis of X-Cor Sandwich's Compressive Strength

2011 ◽  
Vol 306-307 ◽  
pp. 733-737
Author(s):  
Xu Dan Dang ◽  
Xin Li Wang ◽  
Hong Song Zhang ◽  
Jun Xiao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Compressive Strength ◽  
Failure Modes ◽  
Failure Mechanisms ◽  
Element Model ◽  
Failure Criteria ◽  
Stiffness Degradation ◽  
Element Analysis ◽  
Finite Element Software

In this article the finite element software was used to analyse the values for compressive strength of X-cor sandwich. During the analysis, the failure criteria and materials stiffness degradation rules of failure mechanisms were proposed. The failure processes and failure modes were also clarified. In the finite element model we used the distributions of failure elements to simulate the failure processes. Meanwhile the failure mechanisms of X-cor sandwich were explained. The finite element analysis indicates that the resin regions of Z-pin tips fail firstly and the Z-pins fail secondly. The dominant failure mode is the Z-pin elastic buckling and the propagation paths of failure elements are dispersive. Through contrast the finite element values and test results are consistent well and the error range is -7.6%~9.5%. Therefore the failure criteria and stiffness degradation rules are reasonable and the model can be used to predict the compressive strength of X-cor sandwich.

Sign in / Sign up

Export Citation Format

Share Document