scholarly journals Detecting joint attention events in mother-infant dyads: Sharing looks cannot be reliably identified by naïve third-party observers

PLoS ONE ◽  
2021 ◽  
Vol 16 (7) ◽  
pp. e0255241
Author(s):  
Kirsty E. Graham ◽  
Joanna C. Buryn-Weitzel ◽  
Nicole J. Lahiff ◽  
Claudia Wilke ◽  
Katie E. Slocombe

Joint attention, or sharing attention with another individual about an object or event, is a critical behaviour that emerges in pre-linguistic infants and predicts later language abilities. Given its importance, it is perhaps surprising that there is no consensus on how to measure joint attention in prelinguistic infants. A rigorous definition proposed by Siposova & Carpenter (2019) requires the infant and partner to gaze alternate between an object and each other (coordination of attention) and exchange communicative signals (explicit acknowledgement of jointly sharing attention). However, Hobson and Hobson (2007) proposed that the quality of gaze between individuals is, in itself, a sufficient communicative signal that demonstrates sharing of attention. They proposed that observers can reliably distinguish “sharing”, “checking”, and “orienting” looks, but the empirical basis for this claim is limited as their study focussed on two raters examining looks from 11-year-old children. Here, we analysed categorisations made by 32 naïve raters of 60 infant looks to their mothers, to examine whether they could be reliably distinguished according to Hobson and Hobson’s definitions. Raters had overall low agreement and only in 3 out of 26 cases did a significant majority of the raters agree with the judgement of the mother who had received the look. For the looks that raters did agree on at above chance levels, look duration and the overall communication rate of the mother were identified as cues that raters may have relied upon. In our experiment, naïve third party observers could not reliably determine the type of look infants gave to their mothers, which indicates that subjective judgements of types of look should not be used to identify mutual awareness of sharing attention in infants. Instead, we advocate the use of objective behaviour measurement to infer that interactants know they are ‘jointly’ attending to an object or event, and believe this will be a crucial step in understanding the ontogenetic and evolutionary origins of joint attention.

2021 ◽  
Vol 14 (1) ◽  
pp. 205979912098776
Author(s):  
Joseph Da Silva

Interviews are an established research method across multiple disciplines. Such interviews are typically transcribed orthographically in order to facilitate analysis. Many novice qualitative researchers’ experiences of manual transcription are that it is tedious and time-consuming, although it is generally accepted within much of the literature that quality of analysis is improved through researchers performing this task themselves. This is despite the potential for the exhausting nature of bulk transcription to conversely have a negative impact upon quality. Other researchers have explored the use of automated methods to ease the task of transcription, more recently using cloud-computing services, but such services present challenges to ensuring confidentiality and privacy of data. In the field of cyber-security, these are particularly concerning; however, any researcher dealing with confidential participant speech should also be uneasy with third-party access to such data. As a result, researchers, particularly early-career researchers and students, may find themselves with no option other than manual transcription. This article presents a secure and effective alternative, building on prior work published in this journal, to present a method that significantly reduced, by more than half, interview transcription time for the researcher yet maintained security of audio data. It presents a comparison between this method and a fully manual method, drawing on data from 10 interviews conducted as part of my doctoral research. The method presented requires an investment in specific equipment which currently only supports the English language.


IEEE Software ◽  
1999 ◽  
Vol 16 (4) ◽  
pp. 55-57 ◽  
Author(s):  
W.T. Councill

2015 ◽  
Author(s):  
W. David Joiner ◽  
Charles J. Cook

Propulsion shaft alignment is a necessary and crucial step in the ship construction process, with manning and schedule constraints requiring accurate results as efficiently as possible. There are two methods for measuring the bearing loading along the shaft line: strain gages and load cells. The legacy method for using strain gages required a lot of man power and the legacy method for using load cells was dependent on the quality of machinist made available. Strain gages are the transducers of choice for measurement; however the data acquisition, especially for ships with long shafting systems, can require many strain gage positions and personnel to conduct tests. Load cells are used to validate the accuracy of the strain gage method and to calculate the shaft runout at each bearing location.


Tunas Agraria ◽  
2020 ◽  
Vol 3 (2) ◽  
pp. 53-75
Author(s):  
Dedy Setyo Irawan ◽  
Harvini Wulansari

Abstract: Complete Systematic Land Registration is a program which taken by the government in providing legal certainty in the field of land in Indonesia. PTSL activities at Sidoarjo Regency and Pasuruan Regency Land Office are carried out with third parties. Before starting the measurement, it is necessary to carry out the contradictoire delimitatie principle to ensure legal certainty of ownership of land rights. The research used a qualitative method with a descriptive approach. The data analysis carried out by compiling logically proportional statements to answer research questions. Problem analysis is carried out by making a description based on premier data and secondary data obtained through interviews and observations of implementation. The results of the research showed that the implementation of the contradictoire delimitatie principle is broadly following PP. No. 24 of 1997 and PMNA KaBPN No. 3 of 1997. The results of the study also showed that there were obstacles in the implementation of the contradictoire delimitatie principle, such as the third parties were not following technical guidelines No. 01 / JUKNIS-300/1/2018 annex 10 in the making of measurement drawings. Quality control is needed to improve the quality of work and results of third party products and minimize land problems in the future.Keywords: principle of contradictoire delimitation, third party. Intisari : Pendaftaran Tanah Sistematis Lengkap (PTSL) merupakan langkah pemerintah dalam memberikan jaminan kepastian hukum dalam bidang pertanahan di Indonesia. Kegiatan PTSL di Kantor Pertanahan Kabupaten Sidoarjo dan Kabupaten Pasuruan dilaksanakan bekerjasama dengan Pihak Ketiga yang sebelumnya melalui tahapan asas contradictoire delimitatie untuk menjamin kepastian hukum kepemilikan hak atas tanah. Metode penelitian yang digunakan adalah metode kualitatif dengan pendekatan deskriptif. Teknik analisa yang dilakukan yaitu dengan menyusun pernyataan-pernyataan proposional secara logis untuk menjawab pertanyaan penelitian. Analisa permasalahan dilakukan dengan membuat uraian berdasarkan data premier dan data sekunder yang diperoleh melalui wawancara serta observasi langsung terhadap pelaksanaan kegiatan. Hasil penelitian menunjukkan bahwa pelaksanaan asas contradictoire delimitatie secara garis besar telah sesuai dengan PP. No. 24 Tahun 1997 dan PMNA KaBPN No. 3 Tahun 1997. Dalam pelaksanaanya terdapat hambatan yakni  pembuatan Gambar Ukur oleh Pihak Ketiga tidak sesuai dengan pedoman JUKNIS No. 01/JUKNIS-300/1/2018 lampiran 10. Sehingga diperlukan pengawasan kendali mutu terkait pekerjaan dan hasil produk dari Pihak Ketiga agar kedepannya hasil pekerjaan yang dihasilkan lebih baik dan tidak menjadi permasalahan pertanahan dikemudian hari.Kata Kunci : asas contradictoire delimitatie, pihak ketiga.


Author(s):  
JOHN C. SLOAN ◽  
TAGHI M. KHOSHGOFTAAR

We examine two open engineering problems in the area of testing and formal verification of internet-enabled service oriented architectures (SOA). The first involves deciding when to formally and exhaustively verify versus when to informally and non-exhaustively test. The second concerns scalability limitations associated with formal verification, to which we propose a semi-formal technique that uses software agents. Finally, we assess how these findings can improve current software quality assurance practices. Addressing the first problem, we present and explain two classes of tradeoffs. External tradeoffs between assurance, performance, and flexibility are determined by the business needs of each application, whether it be in engineering, commerce, or entertainment. Internal tradeoffs between assurance, scale, and level of detail involve the technical challenges of feasibly verifying or testing an SOA. To help decide whether to exhaustively verify or non-exhaustively test, we present and explain these two classes of tradeoffs. Identifying a middle ground between testing and verification, we propose using software agents to simulate services in a composition. Technologically, this approach has the advantage of assuring the quality of compositions that are too large to exhaustively verify. Operationally, it supports testing these compositions in the laboratory without access to source code or use of network resources of third-party services. We identify and exploit the structural similarities between agents and services, examining how doing so can assure the quality of service compositions.


MQTT protocol is publishing-subscribing model for IoT communication. In case of Quality of Services analysis, it is important to check the request and responses between publisher and subscriber. Any threat in communication channel is mostly leads to delay in operation. Hence, if we able to identify the delay parameter, we can suggest by means of QoS that there is a immediate need of security check for IoT system. As many IoT devices performed in unchecked, complicated, and often aggressive surroundings, safe-guarding IoT units present many different challenges. The key purpose for support quality degradation of IoT device interaction can be harmful attacks. Plenty of gadgets are often susceptible to port attacks/botnets hits, such as network attack events, which usually assessed by performing QoS Analysis. To start with factors affecting Quality of Services (QoS), in this paper we developed QoS evaluation algorithm “MQoS” for MQTT protocol and considered QoS-0 as an evaluation parameter. This paper refers the threat model which represents the flow of threats for proposed case study and can help to identify QoS by evaluating the possible communication threats. End–to-end device communication requests and responses are needed to be evaluated for large systems to get the actual QoS parameters for that system. For this reason the actual QoS tests will be conducted for third party applications.In this paper we presented results of MQTTv311 simulation for cooling sensor system.


Author(s):  
B. Meguenni ◽  
M. A. Hafid

<p><strong>Abstract.</strong> OpenStreetMap (OSM) uses the Open Database License, it is a collaborative project that collects a rich set of vector data provided by volunteers. It is a global collection of mapping data that can be used for a wide variety of purposes. Many third-party online maps are based on OpenStreetMap data. Currently, more and more large organizations are choosing OSM for their maps.</p> <p>In addition, the analysis of the spatial quality of the OSM data shows that particular care must be taken. However, there are several methods for assessing the quality of the OSM data by comparing the OSM to an authoritative dataset. In this context, it is essential to develop an automatic procedure to improve its spatial quality.</p> <p>This work proposes a quantitative method for comparing the quality of the OSM and an authoritative data set on urban networks in the city of Oran (Algeria). The procedure is based on python modules in a GIS environment and provides measurements of the spatial accuracy and completeness of the OSM road network. The method is applied to assess the quality of the Oran OSM road network data set through a comparison with the official Algerian dataset. The results show that the OSM's Algerian road network is very complete, but with low spatial accuracy.</p>


2021 ◽  
Author(s):  
Robert Home ◽  
Nicole Bauer

Abstract Academics and city administrations generally agree that environmental management decisions should be science based, which suggests the value of collaboration between city officials and researchers. Such collaboration, termed “ecology with cities”, is an example of translational ecology that should integrate ecological and social sciences to inform decision-makers. However, there has been insufficient reflection on whether ecology with cities achieves the expected development of practical social-ecological knowledge for the common good. We addressed this gap by asking city officials and researchers, in Switzerland and with whom we have collaborated in the past, about their motivations for, and experiences with, transdisciplinary collaboration. The respondents reported largely overlapping goals and an awareness of the mutual benefits of accessing the skills and resources of the other group. However, the reflections also unearthed latent tensions related to insufficient mutual awareness of institutional boundaries and limitations. We conclude that researchers should try to include collaboration partners who have experience in translational ecology practice and should establish learning processes early in a collaboration. Building good working relationships with city administrations and establishing such processes would facilitate the creation of realistic mutual expectations in which institutional limitations are considered so that common goals of maintaining or improving the ecological quality of cities can be amicably reached.


Author(s):  
Johannes Felix Simon Brachmann ◽  
Andreas Baumgartner ◽  
Peter Gege

The Calibration Home Base (CHB) is an optical laboratory designed for the calibration of imaging spectrometers for the VNIR/SWIR wavelength range. Radiometric, spectral and geometric calibration as well as the characterization of sensor signal dependency on polarization are realized in a precise and highly automated fashion. This allows to carry out a wide range of time consuming measurements in an ecient way. The implementation of ISO 9001 standards in all procedures ensures a traceable quality of results. Spectral measurements in the wavelength range 380–1000 nm are performed to a wavelength uncertainty of +- 0.1 nm, while an uncertainty of +-0.2 nm is reached in the wavelength range 1000 – 2500 nm. Geometric measurements are performed at increments of 1.7 µrad across track and 7.6 µrad along track. Radiometric measurements reach an absolute uncertainty of +-3% (k=1). Sensor artifacts, such as caused by stray light will be characterizable and correctable in the near future. For now, the CHB is suitable for the characterization of pushbroom sensors, spectrometers and cameras. However, it is planned to extend the CHBs capabilities in the near future such that snapshot hyperspectral imagers can be characterized as well. The calibration services of the CHB are open to third party customers from research institutes as well as industry.


1999 ◽  
Vol 123 (8) ◽  
pp. 677-679
Author(s):  
Harold Zarkowsky

Abstract Managed care organizations must establish formal processes for the evaluation of new technology, procedures, and drugs to enhance the quality of health care delivered and to support coverage and utilization decision making. Evidence-based research and the results of controlled clinical trials are the preferred sources of outcomes data to support the safety and effectiveness of the technology, procedure, or drug under review. In addition to extensive literature review, the opinion of experts in the field and acceptance by the medical community are considered. Assessments of new technology and drugs are available for purchase from several vendors, and managed care organizations can adopt or modify such evaluations to develop medical coverage policies. The research community can assist third-party payers by conducting studies on practices that might lead to substantial, rather than marginal, improvement in health, pay particular attention to study design when randomized controlled studies are not possible, and include functional and behavioral measures in analysis of outcomes.


Sign in / Sign up

Export Citation Format

Share Document