scholarly journals Multiple-Reaction Monitoring–Mass Spectrometric Assays Can Accurately Measure the Relative Protein Abundance in Complex Mixtures

2012 ◽  
Vol 58 (4) ◽  
pp. 777-781 ◽  
Author(s):  
Andrew N Hoofnagle ◽  
Jessica O Becker ◽  
Michael N Oda ◽  
Giorgio Cavigiolio ◽  
Philip Mayer ◽  
...  

Abstract BACKGROUND Mass spectrometric assays could potentially replace protein immunoassays in many applications. Previous studies have demonstrated the utility of liquid chromatography–multiple-reaction monitoring–mass spectrometry (LC-MRM/MS) for the quantification of proteins in biological samples, and many examples of the accuracy of these approaches to quantify supplemented analytes have been reported. However, a direct comparison of multiplexed assays that use LC-MRM/MS with established immunoassays to measure endogenous proteins has not been reported. METHODS We purified HDL from the plasma of 30 human donors and used label-free shotgun proteomics approaches to analyze each sample. We then developed 2 different isotope-dilution LC-MRM/MS 6-plex assays (for apoliporoteins A-I, C-II, C-III, E, B, and J): 1 assay used stable isotope-labeled peptides and the other used stable isotope-labeled apolipoprotein A-I (an abundant HDL protein) as an internal standard to control for matrix effects and mass spectrometer performance. The shotgun and LC-MRM/MS assays were then compared with commercially available immunoassays for each of the 6 analytes. RESULTS Relative quantification by shotgun proteomics approaches correlated poorly with the 6 protein immunoassays. In contrast, the isotope dilution LC-MRM/MS approaches showed correlations with immunoassays of r = 0.61–0.96. The LC-MRM/MS approaches had acceptable reproducibility (<13% CV) and linearity (r ≥0.99). Strikingly, a single protein internal standard applied to all proteins performed as well as multiple protein-specific peptide internal standards. CONCLUSIONS Because peak area ratios measured in multiplexed LC-MRM/MS assays correlate well with immunochemical measurements and have acceptable operating characteristics, we propose that LC-MRM/MS could be used to replace immunoassays in a variety of settings.

2019 ◽  
Vol 102 (6) ◽  
pp. 1673-1680 ◽  
Author(s):  
Dan Li ◽  
Justin A Steimling ◽  
Joseph D Konschnik ◽  
Scott L Grossman ◽  
Ty W Kahler

Abstract Background: Mycotoxins are big concerns in food safety. Analytical methods are important for the evaluation of mycotoxins in different food commodities. Objective: In this study, stable isotope dilution assay (SIDA) was compared with a matrix-matched calibration method for the quantification of mycotoxins in four different commercially available commodities and two reference materials. Methods: All samples were extracted with water–acetonitrile (50+50, v/v), followed by filtration and LC–tandem MS analysis. Results: SIDA calibration accuracies ranged from 78.6 to 112% with relative SDs (RSDs) ≤16% across all four matrices. The majority of the recoveries across all matrices ranged from 70 to 120% with RSDs <11%. Of the four mycotoxins in the reference materials analyzed, only three had 13C-internal standard (IS), whereas the fourth was quantified using a closely eluting 13C-IS for a different mycotoxin. Mycotoxins paired with their corresponding 13C-IS had accuracies >90%, whereas accuracies for the mismatched mycotoxin/13C-IS were <14%. Conclusions: When 13C-IS are not available, matrix-matched calibration was also evaluated as an alternative to quantitating target mycotoxins. The use of 13C-IS is the best way to dynamically account for prevalent matrix effects, but matrix matching provides a viable alternative. Highlights: The study compared SIDA and matrix-matched calibration methods in terms of recovery, efficiency, advantages, and limitations for LC-MS based mycotoxin analysis.


2019 ◽  
Vol 102 (6) ◽  
pp. 1673-1680
Author(s):  
Dan Li ◽  
Justin A. Steimling ◽  
Joseph D. Konschnik ◽  
Scott L. Grossman ◽  
Ty W. Kahler

Background: Mycotoxins are big concerns in food safety. Analytical methods are important for the evaluation of mycotoxins in different food commodities. Objective: In this study, stable isotope dilution assay (SIDA) was compared with a matrix-matched calibration method for the quantification of mycotoxins in four different commercially available commodities and two reference materials. Methods: All samples were extracted with water–acetonitrile (50+50, v/v), followed by filtration and LC–tandem MS analysis. Results: SIDA calibration accuracies ranged from 78.6 to 112% with relative SDs (RSDs) ≤16% across all four matrices. The majority of the recoveries across all matrices ranged from 70 to 120% with RSDs <11%. Of the four mycotoxins in the reference materials analyzed, only three had 13C-internal standard (IS), whereas the fourth was quantified using a closely eluting 13C-IS for a different mycotoxin. Mycotoxins paired with their corresponding 13C-IS had accuracies >90%, whereas accuracies for the mismatched mycotoxin/13C-IS were <14%. Conclusions: When 13C-IS are not available, matrix-matched calibration was also evaluated as an alternative to quantitating target mycotoxins. The use of 13C-IS is the best way to dynamically account for prevalent matrix effects, but matrix matching provides a viable alternative. Highlights: The study compared SIDA and matrix-matched calibration methods in terms of recovery, efficiency, advantages, and limitations for LC-MS based mycotoxin analysis.


2014 ◽  
Vol 60 (2) ◽  
pp. 353-360 ◽  
Author(s):  
Lynn Carr ◽  
Anne-Laure Gagez ◽  
Marie Essig ◽  
François-Ludovic Sauvage ◽  
Pierre Marquet ◽  
...  

Abstract BACKGROUND Blood concentrations of the calcineurin inhibitors (CNIs) cyclosporine and tacrolimus are currently measured to monitor immunosuppression in transplant patients. The measurement of calcineurin (CN) phosphatase activity has been proposed as a complementary pharmacodynamic approach. However, determining CN activity with current methods is not practical. We developed a new method amenable to routine use. METHODS Using liquid chromatography–multiple reaction monitoring mass spectrometry (LC-MRM-MS), we quantified CN activity by measuring the dephosphorylation of a synthetic phosphopeptide substrate. A stable isotope analog of the product peptide served as internal standard, and a novel inhibitor cocktail minimized dephosphorylation by other major serine/threonine phosphatases. The assay was used to determine CN activity in peripheral blood mononuclear cells (PBMCs) isolated from 20 CNI-treated kidney transplant patients and 9 healthy volunteers. RESULTS Linearity was observed from 0.16 to 2.5 μmol/L of product peptide, with accuracy in the 15% tolerance range. Intraassay and interassay recoveries were 100.6 (9.6) and 100 (7.5), respectively. Michaelis–Menten kinetics for purified CN were Km = 10.7 (1.6) μmol/L, Vmax = 2.8 (0.3) μmol/min · mg, and for Jurkat lysate, Km = 182.2 (118.0) μmol/L, Vmax = 0.013 (0.006) μmol/min · mg. PBMC CN activity was successfully measured in a single tube with an inhibitor cocktail. CONCLUSIONS Because LC-MRM-MS is commonly used in routine clinical dosage of drugs, this CN activity assay could be applied, with parallel blood drug concentration monitoring, to a large panel of patients to reevaluate the validity of PBMC CN activity monitoring.


Molecules ◽  
2019 ◽  
Vol 24 (24) ◽  
pp. 4563
Author(s):  
Michael A. Sebald ◽  
Julian Gebauer ◽  
Thomas Sommerfeld ◽  
Matthias Koch

Metabolites from Alternaria fungi exhibit a variety of biological properties such as phytotoxic, cytotoxic, or antimicrobial activity. Optimization of a literature procedure culminated in an efficient total synthesis of (−)-altenuene as well as a stable isotope-labeled derivative suitable for implementation in a LC-MS/MS method for mycotoxin analysis.


1996 ◽  
Vol 79 (2) ◽  
pp. 583-586 ◽  
Author(s):  
Bettina Dollmann ◽  
Dominicus Wichmann ◽  
Alfred Schmitt ◽  
Hans Koehler ◽  
Peter Schreier

Abstract Isotope dilution analysis was used to quantitate 2- aminoacetophenone in wines exhibiting the so- called untypical aging off-flavor. d3-Aminoacetophe- none was synthesized and used as isotopomeric internal standard. The method of quantitation was verified by several model experiments. In the off-flavored wines studied, amounts of 2-aminoacetophe none ranging from 0.7 to 12.8 μg/L were determined.


2004 ◽  
Vol 50 (2) ◽  
pp. 365-372 ◽  
Author(s):  
Sally P Stabler ◽  
Robert H Allen

Abstract Background: We have developed an assay that uses stable-isotope-dilution liquid chromatography–mass spectrometry to assess S-adenosylmethionine (SAM) and S-adenosylhomocysteine (SAH) in body fluids to investigate the relationship of these metabolites to hyperhomocysteinemia. Methods: Commercially obtained SAM (D3 methyl) and 13C5-SAH uniformly labeled in the adenosyl moiety, which was synthesized using S-adenosylhomocysteine hydrolase, were added to samples followed by perchloric acid protein precipitation, C18 chromatography, and analysis by liquid chromatography–mass spectrometry with quantification by comparison of the areas of internal standard and endogenous peaks. Results: Estimates of intraassay imprecision (CV) were 5% and 17% for SAM and SAH, respectively (n = 10). SAM decreased and SAH increased in serum and plasma samples at both 4 °C and room temperature over 80 h. SAM and SAH were unstable in samples stored longer than 2 years at −20 °C. In 48 volunteers, the estimated reference intervals [from mean (2 SD) of log-transformed data] for serum SAM and SAH were 71–168 and 8–26 nmol/L, respectively. Fractional excretion of SAM was higher than that of SAH, and the urinary SAM:SAH ratio was much higher than the serum or erythrocyte SAM:SAH ratios. Conclusions: Stable-isotope-dilution liquid chromatography–mass spectrometry can be used to quantify SAM and SAH in biological fluids and tissues. Sample handling and storage must be stringently controlled for any epidemiologic or clinical use of such assays.


2009 ◽  
Vol 55 (6) ◽  
pp. 1196-1202 ◽  
Author(s):  
Thomas M Annesley ◽  
Larry T Clayton

Abstract Background: Iohexol is an iodinated contrast dye that has been shown to be useful in the estimation of glomerular filtration rate (GFR) in patients with suspected renal insufficiency. We developed and validated an ultraperformance liquid chromatography (UPLC)–triple quadrupole mass spectrometry (MS/MS) assay for quantifying iohexol in human serum. Methods: Sample preparation involved dilution of 50 μL serum with 400 μL water, followed by protein precipitation with zinc sulfate and methanol containing the structural analog ioversol as the internal standard. After 1:20 dilution of the supernatant with water, 5 μL was injected into the UPLC-MS/MS system. Chromatography was performed using a Waters Oasis HLB 5-μm particle size, 2.1 × 20 mm column maintained at 50 °C. We used a 1-step acetonitrile/0.1% formic acid gradient to elute the compounds of interest at a common retention time of 0.96 min. The multiple reaction monitoring transitions used for integration and quantification were m/z 821.7→803.7 for iohexol and m/z 807.9→589.0 for ioversol in the electrospray positive ionization mode. Results: The assay was linear from 2.5 mg/L (lower limit of quantification) to 1500 mg/L iohexol, with a mean extraction efficiency of &gt;99%. Recovery of nominal target concentrations was 99%–102%. Interassay imprecision ranged from 7.9% at a concentration of 2.5 mg/L to 4.1% at 1000 mg/L. Ion suppression studies showed no matrix effects on the ionization of the 2 compounds. Conclusions: This rapid UPLC-MS/MS method can be successfully used for quantifying iohexol in human serum. .


Sign in / Sign up

Export Citation Format

Share Document