Establishment of Cleanliness Evaluation Method Using Ion Chromatography of Vacuum Equipment

Evaluation of the resolution of the Imaging Plate (IP) has been attempted by some methods. An evaluation method for IP resolution, which is not influenced by hard X-rays at higher accelerating voltages, was proposed previously by the present authors. This method, however, requires truoblesome experimental preperations partly because specially synthesized hematite was used as a specimen, and partly because a special shape of the specimen was used as a standard image. In this paper, a convenient evaluation method which is not infuenced by the specimen shape and image direction, is newly proposed. In this method, phase contrast images of thin amorphous film are used.Several diffraction rings are obtained by the Fourier transformation of a phase contrast image of thin amorphous film, taken at a large under focus. The rings show the spatial-frequency spectrum corresponding to the phase contrast transfer function (PCTF). The envelope function is obtained by connecting the peak intensities of the rings. The evelope function is offten used for evaluation of the instrument, because the function shows the performance of the electron microscope (EM).

Download Full-text

Recent Progress In High-Resolution Shadowing For Biological Transmission Electron Microscopy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100181300 ◽

1990 ◽

Vol 48 (1) ◽

pp. 510-511 ◽

Cited By ~ 1

Author(s):

Heinz Gross ◽

Katarina Krusche ◽

Peter Tittmann

Keyword(s):

Heavy Metal ◽

High Resolution ◽

Freeze Drying ◽

Atmospheric Conditions ◽

Vacuum Equipment ◽

Transmission Electron ◽

Gas Atmosphere ◽

Gas Molecules ◽

Residual Gas ◽

Backing Layer

Freeze-drying followed by heavy metal shadowing is a long established and straight forward approach to routinely study the structure of dehydrated macromolecules. Very thin specimens such as isolated membranes or single macromolecules are directly adsorbed on C-coated grids. After rapid freezing the grids are transferred into a suitable vacuum equipment for freeze-drying and heavy metal shadowing.To improve the resolution power of shadowing films we introduced shadowing at very low specimen temperature (−250°C). To routinely do that without the danger of contamination we developed in collaboration with Balzers an UHV (p≤10-9 mbar) machine (BAF500K, Fig.2). It should be mentioned here that at −250°C the specimen surface acts as effective cryopump for practically all impinging residual gas molecules from the residual gas atmosphere.Common high resolution shadowing films (Pt/C, Ta/W) have to be protected from alterations due to air contact by a relatively thick C-backing layer, when transferred via atmospheric conditions into the TEM. Such an additional C-coat contributes disturbingly to the contrast at high resolution.

Download Full-text

Combining Values

Guides Newsletter ◽

10.1001/amaguidesnewsletters.2002.marapr01 ◽

2002 ◽

Vol 7 (2) ◽

pp. 1-4, 12 ◽

Cited By ~ 1

Author(s):

Christopher R. Brigham

Keyword(s):

Lower Extremity ◽

Upper Extremity ◽

Evaluation Method ◽

Proximal Phalanx ◽

Common Error ◽

The Third ◽

Whole Person ◽

Impairment Ratings ◽

Upper Extremity Impairment ◽

The Individual

Abstract To account for the effects of multiple impairments, evaluating physicians must provide a summary value that combines multiple impairments so the whole person impairment is equal to or less than the sum of all the individual impairment values. A common error is to add values that should be combined and typically results in an inflated rating. The Combined Values Chart in the AMA Guides to the Evaluation of Permanent Impairment, Fifth Edition, includes instructions that guide physicians about combining impairment ratings. For example, impairment values within a region generally are combined and converted to a whole person permanent impairment before combination with the results from other regions (exceptions include certain impairments of the spine and extremities). When they combine three or more values, physicians should select and combine the two lowest values; this value is combined with the third value to yield the total value. Upper extremity impairment ratings are combined based on the principle that a second and each succeeding impairment applies not to the whole unit (eg, whole finger) but only to the part that remains (eg, proximal phalanx). Physicians who combine lower extremity impairments usually use only one evaluation method, but, if more than one method is used, the physician should use the Combined Values Chart.

Download Full-text