scholarly journals Gain Enhancement of Double-Slot Vivaldi Antenna using Corrugated Edges and Semicircle Director for Microwave Imaging Application

2021 ◽  
Vol 21 (2) ◽  
pp. 85
Author(s):  
Findi Nur Witriani ◽  
Yahya Syukri Amrullah ◽  
Fajri Darwis ◽  
Taufiqqurrachman Taufiqqurrachman ◽  
Yusuf Nur Wijayanto ◽  
...  

Microwave imaging, such as images for radiological inspection in the medical profession, is one of the applications utilized in ultra-wideband (UWB) frequency ranges. The Vivaldi antenna is one of the most popular antennas for this purpose. The antenna is utilized because of its simple, lightweight, and compact design, as well as its excellent efficiency and gain capabilities. In this work, we present a high-gain Vivaldi antenna for microwave imaging applications. The proposed Vivaldi antenna is designed using a double-slot structure method with the addition of corrugated edges and a semicircle director aimed at improving the gain. The antenna is designed to operate at frequencies ranging from 3.1 to 10.6 GHz. Based on the modeling findings, the suggested antenna attain a bandwidth of 7.5 GHz with operating frequencies from 3.1 GHz to 10.6 GHz for a VSWR of less than two. In comparison to a typical single slot antenna, the suggested antenna provides a substantial boost in gain performance. The increase in gain is proportional to the frequency of operation. The constructed antenna has a lower bandwidth than the simulated one, with operating frequencies of 3.5 GHz – 3.75 GHz and 4.25 – 10.89 GHz, respectively, and useable bandwidths of 250 MHz and 6.64 GHz. All these results suggest that the antenna is suitable for microwave imaging applications.

2021 ◽  
Vol 11 (8) ◽  
pp. 3606
Author(s):  
Seonho Lim ◽  
Young Joong Yoon

In this paper, a wideband-narrowband switchable tapered slot antenna (TSA) with a compact meander line resonator for an integrated microwave imaging and hyperthermia system was proposed. A compact meander line resonator, which exhibited band-pass characteristics and provided narrowband characteristics by using one PIN diode, was fabricated beneath the tapered slot of the wideband TSA to minimize the degradation of the wideband characteristics. Moreover, the electromagnetic energy was transferred to the meander line resonator with a coupling effect to ensure effective frequency switching. By adapting a PIN diode on the meander line resonator, frequency switching could be achieved. In this way, the proposed antenna could operate in a real-time frequency switching mode between the ultra-wideband (UWB; 3.1~10 GHz), which is used for microwave imaging, and the 2.45 GHz band (industrial, scientific, and medical, ISM band), which is used for microwave hyperthermia. Frequency and time-domain results proved the applicability of the proposed antenna to an integrated breast cancer detection and treatment system.


2020 ◽  
Vol 10 (7) ◽  
pp. 2429 ◽  
Author(s):  
Li Hui Dai ◽  
Chong Tan ◽  
Yong Jin Zhou

Stable radiation pattern, high gain, and miniaturization are necessary for the ultra-wideband antennas in the 2G/3G/4G/5G base station applications. Here, an ultrawideband and miniaturized spoof plasmonic antipodal Vivaldi antenna (AVA) is proposed, which is composed of the AVA and the loaded periodic grooves. The designed operating frequency band is from 1.8 GHz to 6 GHz, and the average gain is 7.24 dBi. Furthermore, the measured results show that the radiation patterns of the plasmonic AVA are stable. The measured results are in good agreement with the simulation results.


2006 ◽  
Vol 48 (11) ◽  
pp. 2212-2216 ◽  
Author(s):  
A. M. Abbosh ◽  
H. K. Kan ◽  
M. E. Bialkowski

The proposed vivaldi antenna for wearable applications is done using flexible material. The designed antenna has the length of 8 cm and width is 6 cm. For the gain enhancement, strip lines are added in the vivaldi. There are six strip lines and the length of the strip is varied. By adding the strip line, gain of the antenna is increased compared to without strip lines. It has high gain and directivity. Poly-Ethylene Terephthalate (PET) is used as a substrate for achieving the flexibility and it has high resist to moisture. It has board range of use temperature, -60 to 130°C. For every iteration, a strip line is added one by one upto six lines. The gain and directivity of the antenna is 5.4 dB for both the parameters.


2017 ◽  
Vol 6 (4) ◽  
pp. 63-69 ◽  
Author(s):  
R. Singha ◽  
D. Vakula

A broadband gradient refractive index (GRIN) metamaterial is used to improve the gain of the tapered slot antenna. The proposed metamaterial is capable of reducing the side lobe level of the antenna. The gradient refractive index (GRIN) metamaterial is constructed by using non-resonant parallel-line unit cells with different refractive index. Due to the non-resonant structure, the proposed unit cell exhibits low loss and large frequency bandwidth. The metamaterial, whose effective refractive index is lower than that of the substrate on which the antenna is printed. Therefore, the proposed metamaterial is act as a regular lens in beam focusing. The GRIN metamaterial is integrated in front of the antenna which has the capability to manipulate electromagnetic wave accurately. The measurement results indicate that the reflection coefficient of the antenna is below -10 dB over the frequency band from 3 to 11 GHz. The radiation pattern of the antenna shows the beam width becomes narrow and directive with low side lobe level. The peak gain is increased by 2.1 dB at 9.5 GHz.


Sign in / Sign up

Export Citation Format

Share Document