scholarly journals Titanium Dioxide and Polyethylmethacrylate electrospun nanofibers: assessing the technique parameters and morphological characterization

2019 ◽  
Vol 22 (1) ◽  
pp. Process ◽  
Author(s):  
Jessica Dias Santos ◽  
Tabata Prado Sato ◽  
Aline Lins de Lima ◽  
Andrea Souza Nogueira ◽  
Cristiane Campos Costa Quishida ◽  
...  
Keyword(s):  
Titanium Dioxide ◽  
Morphological Characteristics ◽  
Electrospun Nanofibers ◽  
Morphological Characterization ◽  
Electrospinning Technique ◽  
Flow Rates ◽  
X Ray ◽  
Significant Difference ◽  
The Mean

This work studied the synthetization and morphological characterization of Polyethylmethacrylate (PEMA) nanofibers (NFs) containing titanium dioxide (TiO2) produced by the electrospinning technique. The solution to produce the nanofibers was prepared by dissolving 2.5g PEMA in 6.75mL of 1.1.2.2- tetrachloroethane and 3.375mL of dimethylformamide (DMF), and 0.405g of TiO2 was added to the solution. The nanofiber production used different distances between the tip of the needle to the collector (10, 12 and 15 cm) and two flow rates (0.05 mLh-1 and 0.08 mLh-1) were employed, while the applied voltage was 17kV. The NF morphology was analyzed by Scanning Electron Microscopy (SEM) and Image J software. We used Fourier Infrared Spectroscopy (FTIR) and Energy Dispersive X-Ray Spectroscopy (EDS) to evaluate the structural properties. All parameters were effective in the NF production, however it was shown that the distance of 12 cm produced the best NFs. The mean diameters showed no statistically significant difference between the samples. The FTIR analysis showed characteristic peaks of PEMA and TiO2. It was concluded that the employed method was efficient for NF production containing PEMA and TiO2,and the morphological characteristics of the NFs were influenced by the voltage and distance. KeywordsPolymer; Fibers; Electrochemistry.

Evaluation of Calcined Temperature on the Structural and Morphological Characterization of TiO2 Doped with Zr Nanopowders Obtained by the Pechini Method

2012 ◽  
Vol 727-728 ◽  
pp. 1393-1397 ◽  
Author(s):  
M.A. Ribeiro ◽  
Laédna Souto Neiva ◽  
Ruth Herta Goldsmith Aliaga Kiminami ◽  
J.B.L. de Oliveira ◽  
L. Gama
Keyword(s):  
Pechini Method ◽  
Anatase Phase ◽  
Morphological Characteristics ◽  
Morphological Characterization ◽  
Catalytic Reactions ◽  
X Ray Diffraction ◽  
X Ray ◽  
20 Nm ◽  
Calcined Temperature

Because of the unique properties that the system TiO2-ZrO2 has, this system has attracted great interest in catalytic circles. In general, the TiO2-ZrO2 oxides composites have a greater surface area and a stronger acidity when compared to the single oxide and they are used as catalysts supports for many catalytic reactions. This work is to evaluate the effect of calcined temperature in structural and morphological characteristics of Ti1-xZrxO2nanopowders obtained by Pechini method. For this study, the doping value was 0.25 moles of Zr. The powders were calcined at temperature of 500 to 900°C for one hour. The powders were characterized by XRD, SEM and BET. The X-ray diffraction showed that the powders present a TiO2anatase phase and another of ZrO2tetragonal. The crystallite size ranged from 4.8 to 14.6 nm for the temperature of 500 to 900°C, respectively. The analysis of scanning electron microscopy showed soft homogeneous agglomerates with particles around 100 nm. The main particles sizes by BET were ranged from 10 to 20 nm, showing that the synthesis is effective to obtain nanometric powders.

Caracterização da Peneira Média em Clones de Coffea canephora

REVISTA FIMCA ◽  
2018 ◽  
Vol 5 (2) ◽  
pp. 28-31
Author(s):  
Darlan Darlan Sanches Barbosa Alves ◽  
Victor Mouzinho Spinelli ◽  
Marcos Santana Moraes ◽  
Carolina Augusto De Souza ◽  
Rodrigo da Silva Ribeiro ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Block Design ◽  
Coffea Canephora ◽  
Coffee Production ◽  
Randomized Block Design ◽  
Significant Difference ◽  
The Mean ◽  
Four Blocks ◽  
Selection Of

Introdução: O estado de Rondônia se destaca como tradicional produtor de café, sendo o segundo maior produtor brasileiro de C. canephora. No melhoramento genético de C. canephora, a seleção de plantas de elevada peneira média está associada à bebida de qualidade superior. Objetivos: O objetivo desse estudo foi avaliar a variabilidade genética de clones de C. canephora para o tamanho dos grãos, mensurado a partir da avaliação da peneira média (PM). Materiais e Métodos: Para isso, foi conduzido ao longo de dois anos agrícolas experimento no campo experimental da Embrapa no município de Ouro Preto do Oeste-RO, para a avaliação da peneira média de 130 genótipos (clones) com características das variedades botânicas Conilon, Robusta e híbridos intervarietais. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições de quatro plantas por parcela. Resultados: Não houve resultados significativos para a interação clones X anos, indicando uma maior consistência no comportamento das plantas ao longo do tempo. Porém foram observadas diferenças significativas para o tamanho dos grãos entre os genótipos avaliados, possibilitando selecionar genótipos superiores. Conclusão: Os genótipos agruparam-se em cinco classes de acordo com o teste de média, subsidiando a caracterização de um gradiente de variabilidade da característica avaliada ABSTRACTIntroduction: Coffea canephora accounts for approximately 35% of the world's coffee production. The state of Rondônia stands out as a traditional coffee producer, being the second largest Brazilian producer of C. canephora. In the classical genetic improvement of C. anephora, the selection of plants of high average sieve is associated with a drink of superior quality. Objectives: The objective of this udy was to evaluate the genetic variability of Coffea canephora clones for the agronomic medium sieve (PM). Materials and Methods: The experiment was conducted in the experimental field of Embrapa, municipality of OuroPreto do Oeste-RO, located at coordinates 10º44'53 "S and 62º12'57". One hundred thirty genotypes (clones) of botanical characteristics Conilon, Robusta and intervarietal hybrids were evaluated in the agricultural years 2013-2014 and 2014-2015. The experimental design was a randomized block design with four blocks and four plants per plot, spacing 3.5 x 1.5 meters between plants. Results: Significant difference was found for the grain size. According to the F test, at 5% probability, the genotypes were grouped into five classes according to the mean test. Conclusion: The results obtained subsidized the characterization of a variability gradient of the evaluated trait.

scholarly journals Integration of Dental Implants in Conjunction with EDTA-Conditioned Dentin Grafts: An Experimental Study

2021 ◽  
Vol 9 (6) ◽  
pp. 63
Author(s):  
Payam Farzad ◽  
Ted Lundgren ◽  
Adel Al-Asfour ◽  
Lars Andersson ◽  
Christer Dahlin
Keyword(s):  
Direct Contact ◽  
Mineral Content ◽  
X Rays ◽  
X Ray ◽  
Dentin Surface ◽  
Significant Difference ◽  
C And N ◽  
Micro Implants ◽  
Demineralized Dentin

This study was undertaken to investigate the integration of titanium micro-implants installed in conjunction with previously dentin-grafted areas and to study the morphological appearance, mineral content, and healing pattern of xenogenic EDTA-conditioned dentin blocks and granules grafted to cavities in the tibial bone of rabbits. Demineralized and non-demineralized dentin blocks and granules from human premolars were implanted into cavities prepared on the lateral aspects of the tibias of rabbits. After a healing period of six months, micro-implants were installed at each surgical site. Histological examinations were carried out after 24 weeks. Characterization of the EDTA-conditioned dentin blocks was performed by means of light microscopy, dental X-rays, scanning electron microscopy, and energy dispersive X-ray analysis (EDX). No implants were found to be integrated in direct contact with the dentin particles or blocks. On the EDTA-conditioned dentin surface, the organic marker elements C and N dominated, as revealed by EDX. The hydroxyapatite constituents Ca and P were almost absent on the dentin surface. No statistically significant difference was observed between the EDTA-conditioned and non-demineralized dentin, as revealed by BIC and BA. The bone-inductive capacity of the dentin material seemed limited, although demineralization by means of EDTA indicated higher BIC and BA values in conjunction with the installed implants in the area. A 12 h EDTA treatment did not fully decalcify the grafts, as revealed by X-ray analysis.

Clinical and molecular epidemic characterization of rotavirus infection among children under five years old in Shandong province, China.

2021 ◽  
Author(s):  
Shixiao Dong ◽  
Deyu Huang ◽  
Zheng Wang ◽  
Guanyou Zhang ◽  
Fengjuan Zhang ◽  
...  
Keyword(s):  
Lower Incidence ◽  
Age Groups ◽  
Clinical Manifestations ◽  
Shandong Province ◽  
Rotavirus Infection ◽  
National Immunization ◽  
Significant Difference ◽  
The Mean ◽  
And Control

Abstract Rotavirus was the an important causative agent of acute gastroenteritis in children. In China, rotavirus was positive in approximately 30% of the diarrhea children and become a serious public problem. This study was carried out to investigate the clinical and molecular epidemic characterization of rotavirus infection among children under 5 years old with acute diarrhea in Shandong province, China. From July 2017 to June 2018, a total of 1211 fecal specimens were detected and the prevalence of rotavirus infection was 32.12%. The mean age of positive children was 12.2 ± 10.9 months and the highest infection rate was observed in children aged 7–12 months with a rate of 41.64%. G9P[8] (76.61%) was the most prevalent combinations followed by G2P[4] (7.20%), G3P[8] (3.60%) and G9P[4] (2.06%). In addition to diarrhea, vomiting, fever and dehydration were the most common accompanied symptoms. In general, there was no significant difference in clinical manifestations among different age groups. However, the clinical manifestations between vaccinated and unvaccinated children were significantly different. Vaccinated children showed lower incidence and frequency of vomiting, lower incidence and degree of dehydration, lower incidence of severe cases than unvaccinated children. The findings suggested necessary to continue rotavirus strains surveillance in order to monitor the change of prevalent genotype. Moreover, introducing vaccine into national immunization program to prevent and control rotavirus infections is needed in China.

scholarly journals Investigations of M3Al8O15:Eu3+,Dy3+ (M = Ba, Ca, Mg) phosphors

2016 ◽  
Vol 34 (2) ◽  
pp. 412-417
Author(s):  
Esra Öztürk
Keyword(s):  
Electron Microscopy ◽  
Solid State Reaction Method ◽  
Morphological Characterization ◽  
X Ray Diffraction ◽  
Reaction Method ◽  
X Ray ◽  
Three Samples ◽  
Scanning Electron ◽  
The Eu

AbstractIn this work, aluminate type phosphorescence materials were synthesized via the solid state reaction method and the photoluminescence (PL) properties, including excitation and emission bands, were investigated considering the effect of trace amounts of activator (Eu3+) and co-activator (Dy3+). The estimated thermal behavior of the samples at certain temperatures (> 1000 °C) during heat treatment was characterized by differential thermal analysis (DTA) and thermogravimetry (TG). The possible phase formation was characterized by X-ray diffraction (XRD). The morphological characterization of the samples was performed by scanning electron microscopy (SEM). The PL analysis of three samples showed maximum emission bands at around 610 nm, and additionally near 589 nm, 648 nm and 695 nm. The bands were attributed to typical transitions of the Eu3+ ions.

Morphological Characterization of Shape-Controlled TiO2 Anatase through XRPD Analysis

2016 ◽  
Vol 230 (9) ◽  
Author(s):  
Mauro Coduri ◽  
Michela Maisano ◽  
Maria Vittoria Dozzi ◽  
Elena Selli
Keyword(s):  
Morphological Characterization ◽  
Morphological Investigation ◽  
X Ray Diffraction ◽  
Preferential Growth ◽  
Rietveld Refinements ◽  
X Ray ◽  
Tio2 Anatase ◽  
Shape Controlled ◽  
Scherrer Equation

AbstractPreferential growth of anatase crystallites along different directions is known to deeply affect their photocatalytic properties, especially with respect to the exposure of the reactive {001} facets. Its extent can be easily quantified through simple geometric calculations, on the basis of crystal sizes extracted for specific directions by means of X-Ray Diffraction data analysis. Nevertheless, the actual results depend on the method employed for such a quantification. Here we report on a comparative morphological investigation, performed by employing the Scherrer equation and the line profile from Rietveld refinements, on shape-controlled anatase photocatalysts produced by employing HF as capping agent. Compared to the Rietveld-based method, the use of the Scherrer equation produces a systematic underestimation of crystallite dimensions, especially concerning the [100] direction, which in turn causes the percentage of exposed {001} crystal facets to be underestimated. Neglecting instrumental-related effects may further reduce the estimate.

scholarly journals HEMATOLOGICAL CHARACTERIZATION OF BETA-THALASSEMIA IN SUDANESE PATIENTS

2020 ◽  
pp. 5-7
Author(s):  
RABAB HASSAN ELSHAIKH ◽  
SANAA ELFATIH HUSSEIN
Keyword(s):  
Iron Deficiency ◽  
Hemoglobin Concentration ◽  
Mean Value ◽  
Beta Thalassemia ◽  
Mean Corpuscular Hemoglobin ◽  
Corpuscular Hemoglobin ◽  
Significant Difference ◽  
Hematological Analysis ◽  
The Mean

Thalassemia is common inherited disorder among humans, and they represent a major public health problem in many areas of the world. The study aimed to the measurement of hematological characterization of beta-thalassemia in Sudanese patients. Blood samples from 61 beta-thalassemic patients were collected after written consent form obtained from all participants. The frequency of adults (>18 years) was 45 (73.8%) and children’s (<18 years) was 16 (26.2%); the frequency of male was 27 (44.3%) and 34 were female (55.7%). Hemoglobin estimation and red cell indices were carried out using the automatic blood cell counter Sysmex K × 21N. The results showed that Hb and RBCs indices were varied between mild to moderate and severe decreasing, hemoglobin concentration (Hb) with the mean value of 9.6 g/dL, with minimum value of 6.1 g/dl and maximum of 11.9 g/dl, while RBCs were increased in all patients, mean value 5.2 c/l, mean corpuscular volume mean was 58.9 fl, hematocrit was 30.4, mean corpuscular hemoglobin (MCH) 18.8 pg, mean corpuscular hemoglobin concentration (MCHC) was 31.7pg, and RDW was 18.8%. The method used for hemoglobin electrophoresis was capillary electrophoresis, Hb pattern shows increased HbA2 and HbF, the mean of HbA is 78.3%, HbF is 2.3%, and HbA2 is 6.5% with the min. value of 3.6% and max. of 12.2%. While the mean of serum iron was 82.75 μg/dl, 7 patients showed low level, 19 high level, and 35 were normal level. Comparison of hematological analysis (HbA2) in thalassemic patients coexisted with iron deficiency and without result was insignificant difference (p=0.645), this result disagrees with references that say iron deficiency masking HbA2. Nevertheless, the association between HbA2 and HbF revealed a statistically significant difference (p<0.013) and HbA2 with Hb was insignificant (p=0.260).

scholarly journals HDPE/SILICA COMPOSITES- PART I: PREPARATION AND CHARACTERIZATION OF METHYLSILANE AND OCTYLSILANE-MODIFIED SILICAS

2019 ◽  
Vol 16 (32) ◽  
pp. 263-278
Author(s):  
Vanessa Machado Babinski RAMOS ◽  
Maurício Gammertt RÖHNELT ◽  
Rodrigo BRAMBILLA
Keyword(s):  
Silica Gel ◽  
Morphological Characteristics ◽  
Specific Area ◽  
Sem Images ◽  
Adsorption Sites ◽  
Pyrogenic Silica ◽  
The Mean ◽  
Complementary Techniques ◽  
Adsorption Desorption

This paper reports the main results concerning the synthesis and characterization of methylsilane and octylsilane-modified silicas. The modification of the silicas with these groups aims to make the silica surface hydrophobic and thus compatible with high-density polyethylene (HDPE) in HDPE/silica composites. In the present work, two types of silica were organofunctionalized: a pyrogenic silica and a silica gel. The silicas were characterized by a series of complementary techniques with the objective of investigating the nature of the surface species and their textural and morphological characteristics. The SEM images showed that the modification of the silicas with organosilanes has been not resulted in changes on the morphology and on the size of silica particles. In relation to the texture properties, determined by N2 adsorption-desorption porosimetry, the silica modification resulted in a decrease of the specific area (SBET) and the mean pore volume, a behavior attributed to the partial coverage of the adsorption sites by the organosilane molecules. The TGA analysis showed that both the methylsilane groups and the octylsilane groups on the surface of silica and silica gel are thermally stable up to 200 ° C, which enables the organofunctionalized silicas in terms of thermal stability, for the process of preparing the composites by extrusion. The results of applying these organofunctionalized silicas in the development of HDPE/silica composites will be presented in a subsequent article, part II of this research.

Sign in / Sign up

Export Citation Format

Share Document