scholarly journals Model of a Wind Turbine with Variable Blade Angle

2021 ◽  
Vol 25 (1) ◽  
pp. 41-48
Author(s):  
Stanisław Chudzik
Keyword(s):  
Optimal Control ◽  
Wind Turbine ◽  
Rotational Speed ◽  
Power Plants ◽  
Turbine Blades ◽  
Wind Farms ◽  
Blade Angle ◽  
Battery Cell ◽  
General Belief ◽  
Wind Speeds

The article presents the results of research into the operation of a model of a wind micropower plant with a variable blade angle. The research was carried out on a miniature model of a measuring stand built for the purpose of carrying out work on pre-developed projects of wind micro power plants. The stand allows to carry out measurements related to the selection of the optimal propeller geometry, as well as the development and testing of algorithms for optimal control of the micropower plant. The physical basics of wind turbine operation and the methods of its optimal control are presented. The results of the performed measurements for the selected propeller blade geometry with the possibility of changing its setting angle are presented. A DC generator with a load with a non-linear characteristic in the form of a Li-Po battery cell was used. The results of operation of a simple MPPT control algorithm are presented. The lack of optimal control systems for the operation of micropower plants is dictated by the general belief that the costs of its production are high in relation to the possible improvement of the efficiency of micropower plants. Moreover, the practical methods of controlling larger wind turbines are not optimal for small and very small turbines. The conducted research focused on determining the possibility of using turbines with variable blade angles depending on its rotational speed. In larger wind farms, changing the blade angle is mainly used to limit the power of the turbine at high wind speeds. In micro wind power plants such solutions are not used for economic reasons. However, the use of a simple mechanism for changing the angle of the blades depending on the rotational speed of the propeller can increase the efficiency of the turbine in a wider range of wind speeds. The small dimensions of the research model allow for quick and cheap development of preliminary prototypes of turbine blades thanks to the possibility of using 3D printing technology.

scholarly journals WRF Modeling of Deep Convection and Hail for Wind Power Applications

2020 ◽  
Vol 59 (10) ◽  
pp. 1717-1733 ◽  
Author(s):  
F. Letson ◽  
T. J. Shepherd ◽  
R. J. Barthelmie ◽  
S. C. Pryor
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Power ◽  
Model Simulation ◽  
Deep Convection ◽  
Turbine Blades ◽  
Wind Farms ◽  
Wind Turbine Blades ◽  
Wind Speeds ◽  
The Impact

AbstractDeep convection and the related occurrence of hail, intense precipitation, and wind gusts represent a hazard to a range of energy infrastructure including wind turbine blades. Wind turbine blade leading-edge erosion (LEE) is caused by the impact of falling hydrometeors onto rotating wind turbine blades. It is a major source of wind turbine maintenance costs and energy losses from wind farms. In the U.S. southern Great Plains (SGP), where there is widespread wind energy development, deep convection and hail events are common, increasing the potential for precipitation-driven LEE. A 25-day Weather Research and Forecasting (WRF) Model simulation conducted at convection-permitting resolution and using a detailed microphysics scheme is carried out for the SGP to evaluate the effectiveness in modeling the wind and precipitation conditions relevant to LEE potential. WRF output for these properties is evaluated using radar observations of precipitation (including hail) and reflectivity, in situ wind speed measurements, and wind power generation. This research demonstrates some skill for the primary drivers of LEE. Wind speeds, rainfall rates, and precipitation totals show good agreement with observations. The occurrence of precipitation during power-producing wind speeds is also shown to exhibit fidelity. Hail events frequently occur during periods when wind turbines are rotating and are especially important to LEE in the SGP. The presence of hail is modeled with a mean proportion correct of 0.77 and an odds ratio of 4.55. Further research is needed to demonstrate sufficient model performance to be actionable for the wind energy industry, and there is evidence for positive model bias in cloud reflectivity.

Far-Field Noise Prediction of Wind Turbines at Different Receivers and Wind Speeds: A Computational Study

2015 ◽  
Author(s):  
Fardin Khalili ◽  
Pradip Majumdar ◽  
Mehdi Zeyghami
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Turbine Blades ◽  
Wind Farms ◽  
Acoustic Power ◽  
Far Field ◽  
Wind Turbine Blades ◽  
Wind Speeds ◽  
Field Noise ◽  
Field Sound

Far-field noise propagation from wind turbines propel development of wind farms to an issue for public acceptance. Airstream contains pressure fluctuations as a result of instability, giving a regular eddy pattern or an irregular turbulent motion which are responsible for the sound produced by wind turbine blades. Aeroacoustic noise emanated from a wind turbine is mainly generated by the interactions of tip and trailing edge of wind turbine blades with the mechanics in wake region such as inflow turbulence structures, boundary layer separation and vortex shedding. Hence, there is a strong necessity for an analytical investigation for noise reducing design and development of the technology in order to further expand wind farms. The objectives of this study are to analyze the far-field aeroacoustics of wind turbines with the purpose of predicting far-field sound pressure levels at different receivers and monitoring total acoustic power captured within wind turbine performance for various wind speeds. Blades are modeled based on NREL S825 airfoil since it has high maximum lift and low profile drag. With the purpose of predicting far-field noise, the Ffowcs Williams-Hawkings (FW-H) acoustics model is the preferred method in order to compute the far-field sound signal which is released from near-field flow. As the key attribute of the research, detached eddy simulation (DES) provides accurate results for the desired simulation since it is a hybrid modeling approach that combines features of Reynolds-averaged Navier-Stokes (RANS) simulation in boundary layers and irrotational flow regions, and large-eddy simulation (LES) in unsteady separation regions. In addition, SST K-Omega detached eddy turbulence model is used due to its good compromise between robustness, computational cost and accuracy. Aerodynamic and aeroacoustic analysis of a wind turbine is performed using a three-dimensional model and a commercial CFD Software, STAR-CCM+. In order to predict far-field sound pressure levels and acoustic powers on different locations, five point receivers are defined downstream of the wind turbine model. Receivers are placed one diameter, D, over the wind turbine rotor blades with 1D, 2D, 5D, 10D and 15D away from the wind turbine that represent receivers 1 to 5. Higher acoustic powers are delivered at closer receivers. It means that acoustic power fades out with larger distances. It is observed that there is a fractional variation of 61%, 17%, 6% and 3% as compared to the receiver 1 for receivers 2, 3, 4 and 5 respectively. Moreover, the results show that variation in total acoustic power is non-linear and higher acoustic powers will be captured for higher velocities. This comparison is done between wind speeds of 10m/s and 15m/s.

Selection of a leading edge noise prediction method for PNoise

2018 ◽  
pp. 214-223
Author(s):  
AM Faria ◽  
MM Pimenta ◽  
JY Saab Jr. ◽  
S Rodriguez
Keyword(s):  
Wind Turbine ◽  
Turbine Blades ◽  
Prediction Method ◽  
Leading Edge ◽  
Wind Farms ◽  
Broadband Noise ◽  
Turbulence Energy ◽  
Noise Prediction ◽  
Migration Routes ◽  
Turbulent Inflow

Wind energy expansion is worldwide followed by various limitations, i.e. land availability, the NIMBY (not in my backyard) attitude, interference on birds migration routes and so on. This undeniable expansion is pushing wind farms near populated areas throughout the years, where noise regulation is more stringent. That demands solutions for the wind turbine (WT) industry, in order to produce quieter WT units. Focusing in the subject of airfoil noise prediction, it can help the assessment and design of quieter wind turbine blades. Considering the airfoil noise as a composition of many sound sources, and in light of the fact that the main noise production mechanisms are the airfoil self-noise and the turbulent inflow (TI) noise, this work is concentrated on the latter. TI noise is classified as an interaction noise, produced by the turbulent inflow, incident on the airfoil leading edge (LE). Theoretical and semi-empirical methods for the TI noise prediction are already available, based on Amiet’s broadband noise theory. Analysis of many TI noise prediction methods is provided by this work in the literature review, as well as the turbulence energy spectrum modeling. This is then followed by comparison of the most reliable TI noise methodologies, qualitatively and quantitatively, with the error estimation, compared to the Ffowcs Williams-Hawkings solution for computational aeroacoustics. Basis for integration of airfoil inflow noise prediction into a wind turbine noise prediction code is the final goal of this work.

scholarly journals Novel Application and Validation of a Method to Assess Visual Impacts of Rotating Wind Turbine Blades Within Woodland Areas

2021 ◽  
Vol 89 (1) ◽  
pp. 1-14
Author(s):  
U. Nopp-Mayr ◽  
F. Kunz ◽  
F. Suppan ◽  
E. Schöll ◽  
J. Coppes
Keyword(s):  
Environmental Impact ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Power Plants ◽  
Laser Scanning ◽  
Forest Canopy ◽  
Turbine Blades ◽  
Wind Turbine Blades ◽  
Environmental Impact Assessments ◽  
Independent Field

AbstractIncreasing numbers of wind power plants (WPP) are constructed across the globe to reduce the anthropogenic contribution to global warming. There are, however, concerns on the effects of WPP on human health as well as related effects on wildlife. To address potential effects of WPP in environmental impact assessments, existing models accounting for shadow flickering and noise are widely applied. However, a standardized, yet simple and widely applicable proxy for the visibility of rotating wind turbines in woodland areas was largely lacking up to date. We combined land cover information of forest canopy extracted from orthophotos and airborne laser scanning (LiDAR) data to represent the visibility of rotating wind turbines in five woodland study sites with a high spatial resolution. Performing an in-situ validation in five study areas across Europe which resulted in a unique sample of 1738 independent field observations, we show that our approach adequately predicts from where rotating wind turbine blades are visible within woodlands or not. We thus provide strong evidence, that our approach yields a valuable proxy of the visibility of moving rotor blades with high resolution which in turn can be applied in environmental impact assessments of WPP within woodlands worldwide.

scholarly journals Analysis of Wind Turbine Aging through Operation Data Calibrated by LiDAR Measurement

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2319
Author(s):  
Hyun-Goo Kim ◽  
Jin-Young Kim
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Farm ◽  
Free Stream ◽  
Turbine Blades ◽  
Wind Farms ◽  
Lidar Measurement ◽  
Wind Turbine Blades ◽  
Wake Effect

This study analyzed the performance decline of wind turbine with age using the SCADA (Supervisory Control And Data Acquisition) data and the short-term in situ LiDAR (Light Detection and Ranging) measurements taken at the Shinan wind farm located on the coast of Bigeumdo Island in the southwestern sea of South Korea. Existing methods have generally attempted to estimate performance aging through long-term trend analysis of a normalized capacity factor in which wind speed variability is calibrated. However, this study proposes a new method using SCADA data for wind farms whose total operation period is short (less than a decade). That is, the trend of power output deficit between predicted and actual power generation was analyzed in order to estimate performance aging, wherein a theoretically predicted level of power generation was calculated by substituting a free stream wind speed projecting to a wind turbine into its power curve. To calibrate a distorted wind speed measurement in a nacelle anemometer caused by the wake effect resulting from the rotation of wind-turbine blades and the shape of the nacelle, the free stream wind speed was measured using LiDAR remote sensing as the reference data; and the nacelle transfer function, which converts nacelle wind speed into free stream wind speed, was derived. A four-year analysis of the Shinan wind farm showed that the rate of performance aging of the wind turbines was estimated to be −0.52%p/year.

scholarly journals Optimal Control of the Positional Electric Drive and Its Implementation

Machines ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 70
Author(s):  
Vladimir Dotsenko ◽  
Roman Prokudin ◽  
Alexander Litvinenko
Keyword(s):  
Optimal Control ◽  
Wind Turbine ◽  
Electric Drive ◽  
Minimum Energy ◽  
Air Gap ◽  
Synchronous Generators ◽  
Capacitor Discharge ◽  
Wind Speeds ◽  
Minimum Energy Consumption ◽  
Low Wind Speeds

The article deals with the optimal control of the positional electric drive of the stator element of a segment-type wind turbine. The calculation options charts current in the assumption of the minimum energy consumption and the implementation of line chart current using the phenomenon of capacitor discharge. The analysis of the implementation is expressed in a jump-like change in current and a triangular graph of the speed change. This article deals with small capacity synchronous wind turbine generators with a segment type stator. These units have the possibility of intentionally changing the air gap between the rotor and stator. This allows: (1) Reduce the starting torque on the rotor shaft, which will allow the rotor to pick up at low wind speeds. (2) Equivalent to change of air gap in this case is change of excitation of synchronous generators. Thus, the purpose of the article is to consider a method of excitation of generators in a segmented design, by controlling the gap with the electric drive, while providing control should be carried out with minimal losses.

scholarly journals Effect of Wind Turbine Classes on the Electricity Production of Wind Farms in Cyprus Island

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Yiannis A. Katsigiannis ◽  
George S. Stavrakakis ◽  
Christodoulos Pharconides
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Energy Production ◽  
Wind Farms ◽  
Electricity Production ◽  
Wind Speeds ◽  
Wind Potential

This paper examines the effect of different wind turbine classes on the electricity production of wind farms in two areas of Cyprus Island, which present low and medium wind potentials: Xylofagou and Limassol. Wind turbine classes determine the suitability of installing a wind turbine in a particulate site. Wind turbine data from five different manufacturers have been used. For each manufacturer, two wind turbines with identical rated power (in the range of 1.5 MW–3 MW) and different wind turbine classes (IEC II and IEC III) are compared. The results show the superiority of wind turbines that are designed for lower wind speeds (IEC III class) in both locations, in terms of energy production. This improvement is higher for the location with the lower wind potential and starts from 7%, while it can reach more than 50%.

Machine Learning Aided Prediction of Rain Erosion Damage on Wind Turbine Blade Sections

2021 ◽  
Author(s):  
Alessio Castorrini ◽  
Paolo Venturini ◽  
Fabrizio Gerboni ◽  
Alessandro Corsini ◽  
Franco Rispoli
Keyword(s):  
Wind Turbine ◽  
Turbine Blade ◽  
Energy Production ◽  
Turbine Blades ◽  
Wind Farms ◽  
Wind Turbine Blade ◽  
Wind Turbine Blades ◽  
Coating Materials ◽  
Erosion Modelling ◽  
Rain Erosion

Abstract Rain erosion of wind turbine blades represents an interesting topic of study due to its non-negligible impact on annual energy production of the wind farms installed in rainy sites. A considerable amount of recent research works has been oriented to this subject, proposing rain erosion modelling, performance losses prediction, structural issues studies, etc. This work aims to present a new method to predict the damage on a wind turbine blade. The method is applied here to study the effect of different rain conditions and blade coating materials, on the damage produced by the rain over a representative section of a reference 5MW turbine blade operating in normal turbulence wind conditions.

Design and Analysis of Wind Turbine Blades: Winglet, Tubercle, and Slotted

2013 ◽  
Author(s):  
Alka Gupta ◽  
Abdulrahman Alsultan ◽  
R. S. Amano ◽  
Sourabh Kumar ◽  
Andrew D. Welsh
Keyword(s):  
Power Generation ◽  
Wind Turbine ◽  
Turbine Blade ◽  
Alternative Energy ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Wind Turbine Blade ◽  
Wind Turbine Blades ◽  
Wind Speeds ◽  
Governing Factor

Energy is the heart of today’s civilization and the demand seems to be increasing with our growing population. Alternative energy solutions are the future of energy, whereas the fossil-based fuels are finite and deemed to become extinct. The design of the wind turbine blade is the main governing factor that affects power generation from the wind turbine. Different airfoils, angle of twist and blade dimensions are the parameters that control the efficiency of the wind turbine. This study is aimed at investigating the aerodynamic performance of the wind turbine blade. In the present paper, we discuss innovative blade designs using the NACA 4412 airfoil, comparing them with a straight swept blade. The wake region was measured in the lab with a straight blade. All the results with different designs of blades were compared for their performance. A complete three-dimensional computational analysis was carried out to compare the power generation in each case for different wind speeds. It was found from the numerical analysis that the slotted blade yielded the most power generation among the other blade designs.

scholarly journals Inter-annual variability of wind climates and wind turbine annual energy production

2018 ◽  
Author(s):  
Sara C. Pryor ◽  
Tristan J. Shepherd ◽  
Rebecca J. Barthelmie
Keyword(s):  
Standard Deviation ◽  
Wind Energy ◽  
Wind Turbine ◽  
Energy Production ◽  
Wind Farm ◽  
Wind Farms ◽  
Wind Speeds ◽  
Annual Variability ◽  
Eastern Usa

Abstract. Inter-annual variability (IAV) of expected annual energy production (AEP) from proposed wind farms plays a key role in dictating project financing. IAV in pre-construction projected AEP and the difference in 50th and 90th percentile (P50 and P90) AEP derives in part from variability in wind climates. However, the magnitude of IAV in wind speeds at/close to wind turbine hub-heights is poorly constrained and maybe overestimated by the 6 % standard deviation of annual mean wind speeds that is widely applied within the wind energy industry. Thus there is a need for improved understanding of the long-term wind resource and the inter-annual variability therein in order to generate more robust predictions of the financial value of a wind energy project. Long-term simulations of wind speeds near typical wind turbine hub-heights over the eastern USA indicate median gross capacity factors (computed using 10-minute wind speeds close to wind turbine hub-heights and the power curve of the most common wind turbine deployed in the region) that are in good agreement with values derived from operational wind farms. The IAV of annual mean wind speeds at/near to typical wind turbine hub-heights in these simulations is lower than is implied by assuming a standard deviation of 6 %. Indeed, rather than in 9 in 10 years exhibiting AEP within 0.9 and 1.1 times the long-term mean AEP, results presented herein indicate that over 90 % of the area in the eastern USA that currently has operating wind turbines simulated AEP lies within 0.94 and 1.06 of the long-term average. Further, IAV of estimated AEP is not substantially larger than IAV in mean wind speeds. These results indicate it may be appropriate to reduce the IAV applied to pre-construction AEP estimates to account for variability in wind climates, which would decrease the cost of capital for wind farm developments.

Sign in / Sign up

Export Citation Format

Share Document