scholarly journals Adaptability and stability of early carioca beans by mixed models

2020 ◽  
Vol 36 ◽  
Author(s):  
Thalyson Vasconcelos Lima ◽  
Paulo Ricardo Dos Santos ◽  
Tâmara Rebecca Albuquerque De Oliveira ◽  
Maxwel Rodrigues Nascimento ◽  
Kleyton Danilo da Silva Costa ◽  
...  
Keyword(s):  
Genetic Parameters ◽  
Mixed Model ◽  
Block Design ◽  
Phenotypic Expression ◽  
Environment Interaction ◽  
Randomized Block Design ◽  
Specific Performance ◽  
Superior Genotypes ◽  
The Mean ◽  
Selection Of

The genotype x environment interaction represents one of the major selection challenges due to the difficulty in identifying effectively superior genotypes. The present study aimed at estimating genetic parameters and selecting genotypes of early Carioca beans by analyzing simultaneous attributes, including yield, adaptability, and stability. In the agricultural year of 2015 and 2016, three trials were conducted, using a randomized block design, with three repetitions each, in the Agreste and Sertao regions of Pernambuco State. The genetic parameters were estimated using the mixed model procedure, and the selection was based on the harmonic mean of the relative performance of genetic values (MHPRVG, abbreviation in Portuguese) method. The environments influenced the phenotypic expression of the bean genotypes during both years, setting a specific adaptation. The mean heritability of the genotypes regarding yield exhibited low magnitude values  in the trials of 2015 (5.78%) and 2016 (13.77%), indicating costly conditions for the selection of the improved genotypes. Genotype CNFC 15856 was selected, considering the genetic gain predicted for yield, by the average and specific performance in the three environments, and by the simultaneous attributes of yield, adaptability, and stability. The MHPRVG method enables the optimized selection of genotypes considering yield, stability, and adaptability; therefore, it should be included in the recommended selective criteria for agronomically superior genotypes in commercial plantations.

scholarly journals Assessing the genotypic performance of carioca beans through mixed models

2018 ◽  
Vol 48 (7) ◽  
Author(s):  
Yure Pequeno de Souza ◽  
Paulo Ricardo dos Santos ◽  
Maxwel Rodrigues Nascimento ◽  
Kleyton Danilo da Silva Costa ◽  
Thalyson Vasconcelos Lima ◽  
...  
Keyword(s):  
Mixed Models ◽  
Selection Criteria ◽  
Genetic Parameters ◽  
Block Design ◽  
Breeding Programs ◽  
Randomized Block Design ◽  
Bean Yield ◽  
The Mean ◽  
Moderate Magnitude ◽  
Selection Of

ABSTRACT: Using genotypes adapted to different regions is one of the main ways to increase Brazilian bean yield. The aim of the present study was to assess the genotypic performance of Carioca beans through mixed models. Fourteen Carioca bean genotypes were assessed in four locations in Pernambuco State (Arcoverde, Caruaru, Belém de São Francisco and São João counties) in 2015. The experiments followed a completely randomized block design, with three repetitions. Genetic parameters were estimated according to the REML/BLUP methodology, whereas genotype selection was based on the harmonic mean of relative performance of genetic values method (MHPRVG). The mean genotype heritability had moderate magnitude, high selective accuracy, besides allowing selection of agronomically superior individuals. Genotypes ‘BRS Notável’, CNFC 15480 and ‘IPR 139’ showed good adaptability and grain yield stability. There was agreement among the statistics μ ̂ + g ̂…, stability (MHVG), adaptability (PRVG), and stability and adaptability of genetic values (MHPRVG) in the discrimination of the most productive genotypes, which presented high adaptability and stability. This outcome indicated that these genotypes can be part of the selection criteria regularly used in bean breeding programs.

scholarly journals Estimation of genetic parameters and selection of Brachiaria humidicola progenies using a selection index

2012 ◽  
Vol 12 (4) ◽  
pp. 237-244 ◽  
Author(s):  
Ulisses José de Figueiredo ◽  
José Airton Rodrigues Nunes ◽  
Cacilda Borges do Valle
Keyword(s):  
Genetic Parameters ◽  
Nutritive Value ◽  
Agronomic Traits ◽  
Block Design ◽  
Selection Index ◽  
Brachiaria Humidicola ◽  
Randomized Block Design ◽  
The Mean ◽  
Selection For ◽  
Selection Of

The objectives of this study were to estimate genetic parameters for agronomic and nutritive value traits for leaves and stems of Brachiaria humidicola progenies and to compare the selection using an additive index considering the agronomic traits alone or combined with the main nutritive value traits. Fifty progenies of the cross cv. BRS Tupi x H31 were evaluated. The experiment was arranged in a randomized block design with eight replications. The forage was cut seven times, at intervals of 30 - 35 days in the rainy season and two intervals of 60 days in the dry season. Trait variability among the progenies was confirmed. The mean progeny heritability ranged from 49.14% to 75.56% for the agronomic and from 19.59% to 71.11% for nutritive value traits. Nine of the ten best lines coincided in the selection for agronomic traits alone and in the selection including the main traits of nutritive value.

Caracterização da Peneira Média em Clones de Coffea canephora

REVISTA FIMCA ◽  
2018 ◽  
Vol 5 (2) ◽  
pp. 28-31
Author(s):  
Darlan Darlan Sanches Barbosa Alves ◽  
Victor Mouzinho Spinelli ◽  
Marcos Santana Moraes ◽  
Carolina Augusto De Souza ◽  
Rodrigo da Silva Ribeiro ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Block Design ◽  
Coffea Canephora ◽  
Coffee Production ◽  
Randomized Block Design ◽  
Significant Difference ◽  
The Mean ◽  
Four Blocks ◽  
Selection Of

Introdução: O estado de Rondônia se destaca como tradicional produtor de café, sendo o segundo maior produtor brasileiro de C. canephora. No melhoramento genético de C. canephora, a seleção de plantas de elevada peneira média está associada à bebida de qualidade superior. Objetivos: O objetivo desse estudo foi avaliar a variabilidade genética de clones de C. canephora para o tamanho dos grãos, mensurado a partir da avaliação da peneira média (PM). Materiais e Métodos: Para isso, foi conduzido ao longo de dois anos agrícolas experimento no campo experimental da Embrapa no município de Ouro Preto do Oeste-RO, para a avaliação da peneira média de 130 genótipos (clones) com características das variedades botânicas Conilon, Robusta e híbridos intervarietais. O delineamento experimental utilizado foi de blocos ao acaso, com quatro repetições de quatro plantas por parcela. Resultados: Não houve resultados significativos para a interação clones X anos, indicando uma maior consistência no comportamento das plantas ao longo do tempo. Porém foram observadas diferenças significativas para o tamanho dos grãos entre os genótipos avaliados, possibilitando selecionar genótipos superiores. Conclusão: Os genótipos agruparam-se em cinco classes de acordo com o teste de média, subsidiando a caracterização de um gradiente de variabilidade da característica avaliada ABSTRACTIntroduction: Coffea canephora accounts for approximately 35% of the world's coffee production. The state of Rondônia stands out as a traditional coffee producer, being the second largest Brazilian producer of C. canephora. In the classical genetic improvement of C. anephora, the selection of plants of high average sieve is associated with a drink of superior quality. Objectives: The objective of this udy was to evaluate the genetic variability of Coffea canephora clones for the agronomic medium sieve (PM). Materials and Methods: The experiment was conducted in the experimental field of Embrapa, municipality of OuroPreto do Oeste-RO, located at coordinates 10º44'53 "S and 62º12'57". One hundred thirty genotypes (clones) of botanical characteristics Conilon, Robusta and intervarietal hybrids were evaluated in the agricultural years 2013-2014 and 2014-2015. The experimental design was a randomized block design with four blocks and four plants per plot, spacing 3.5 x 1.5 meters between plants. Results: Significant difference was found for the grain size. According to the F test, at 5% probability, the genotypes were grouped into five classes according to the mean test. Conclusion: The results obtained subsidized the characterization of a variability gradient of the evaluated trait.

scholarly journals Genetic parameters and estimated genetic gains in young rubber tree progenies

2013 ◽  
Vol 48 (4) ◽  
pp. 411-416 ◽  
Author(s):  
Cecília Khusala Verardi ◽  
Erivaldo José Scaloppi Junior ◽  
Guilherme Augusto Peres Silva ◽  
Lígia Regina Lima Gouvêa ◽  
Paulo de Souza Gonçalves
Keyword(s):  
Genetic Gain ◽  
Genetic Parameters ◽  
Block Design ◽  
Rubber Tree ◽  
First Year ◽  
Genetic Gains ◽  
Selection Gain ◽  
Randomized Block Design ◽  
Using Data ◽  
Selection Of

The objective of this work was to assess the genetic parameters and to estimate genetic gains in young rubber tree progenies. The experiments were carried out during three years, in a randomized block design, with six replicates and ten plants per plot, in three representative Hevea crop regions of the state of São Paulo, Brazil. Twenty-two progenies were evaluated, from three to five years old, for rubber yield and annual girth growth. Genetic gain was estimated with the multi-effect index (MEI). Selection by progenies means provided greater estimated genetic gain than selection based on individuals, since heritability values of progeny means were greater than the ones of individual heritability, for both evaluated variables, in all the assessment years. The selection of the three best progenies for rubber yield provided a selection gain of 1.28 g per plant. The genetic gains estimated with MEI using data from early assessments (from 3 to 5-year-old) were generally high for annual girth growth and rubber yield. The high genetic gains for annual girth growth in the first year of assessment indicate that progenies can be selected at the beginning of the breeding program. Population effective size was consistent with the three progenies selected, showing that they were not related and that the population genetic variability is ensured. Early selection with the genetic gains estimated by MEI can be made on rubber tree progenies.

scholarly journals Study of repeatability and phenotypical stabilization in kale using frequentist, Bayesian and bootstrap resampling approaches

2019 ◽  
Vol 41 (1) ◽  
pp. 42606
Author(s):  
Orlando Gonçalves Brito ◽  
Valter Carvalho de Andrade Júnior ◽  
Alcinei Mistico de Azevedo ◽  
Luan Mateus Silva Donato ◽  
Lidiane Rodrigues Silva ◽  
...  
Keyword(s):  
Genetic Improvement ◽  
Genetic Parameters ◽  
Block Design ◽  
Bootstrap Resampling ◽  
Average Mass ◽  
Estimated Parameters ◽  
Randomized Block Design ◽  
Number Of Leaves ◽  
Bayesian Methodologies ◽  
Selection Of

The aim of this study was to obtain information for the genetic improvement of kale through repeatability and phenotypic stabilization studies and to compare methodologies that represent the reliability of the estimated parameters. Thirty-three half-sib progenies were evaluated in a randomized block design with three replicates and six plants per plot. Eight harvests were evaluated in terms of the yield of fresh leaves, number of shoots, number of leaves and average mass of leaves. Then, a phenotypic repeatability and stabilization study was performed, estimating the genetic parameters σ2a, σ²g, σ²e, and the coefficient of environmental variation and repeatability using the frequentist and Bayesian methodologies. To evaluate the reliability of these estimates, intervals were obtained using the frequentist, Bayesian and bootstrap methods. It was verified that the reliable selection of progenies of half-sib of kale can be achieved in four harvests that were realized between 95 and 170 days after planting. It was observed that the frequentist and Bayesian methodologies are better suited to obtain reliable estimates of the genetic parameters evaluated, as the last one provided smaller amplitudes for the obtained intervals. The bootstrap methodologies are not recommended for phenotypic repeatability and stabilization studies in kale.

scholarly journals Selection of corn cultivars for yield, stability, and adaptability in the state of Amazonas, Brazil

2017 ◽  
Vol 52 (6) ◽  
pp. 455-463 ◽  
Author(s):  
Inocencio Junior de Oliveira ◽  
André Luiz Atroch ◽  
Miguel Costa Dias ◽  
Lauro José Guimarães ◽  
Paulo Evaristo de Oliveira Guimarães
Keyword(s):  
Grain Yield ◽  
Genetic Parameters ◽  
Block Design ◽  
The State ◽  
Environment Interaction ◽  
Growing Seasons ◽  
Randomized Complete Block Design ◽  
Selection For ◽  
Genetic Value ◽  
Selection Of

Abstract: The objective of this work was to evaluate corn cultivars grown in the state of Amazonas, Brazil, which simultaneously show high grain yield, adaptability, and stability. The trials were carried out in seven environments in the state of Amazonas, in a randomized complete block design, with two replicates. The grain yield of 30 corn cultivars was evaluated in four growing seasons, from 2011/2012 to 2014/2015. The genetic parameters were estimated by the REML/Blup methodology. The selection for adaptability and stability was based on the predicted genetic value and on the harmonic mean of the relative performance of the genetic values. Despite the existence of genotype x environment interaction, cultivars with high adaptability and stability were identified. Iranduba - lowland, in 2011/2012 and 2014/2015 - and Rio Preto da Eva - upland, in 2012/2013 - stood out as favorable environments, while Iranduba - upland, in 2011/2012 and 2012/2013 - and Manaus - upland, in 2012/2013 and 2013/2014 - were classified as unfavorable environments. The single-cross hybrid BRS 1055 showed productive superiority and high stability in this region. The Sint 10771, Sint 10781, and Sint 10699 synthetic varieties showed high adaptability. BRS Caimbé shows specific adaptability to cropping in upland environments of the state of Amazonas, Brazil.

scholarly journals Genetic parameters estimate for plant characters of a particular carrot population in two different agroecologic cultivation systems

2020 ◽  
Vol 36 ◽  
Author(s):  
Michelle Souza Vilela ◽  
José Ricardo Peixoto ◽  
Jairo Vidal Vieira ◽  
Giovani Olegário Da Silva ◽  
Daiane da Silva Nóbrega ◽  
...  
Keyword(s):  
Genetic Parameters ◽  
Cropping Systems ◽  
Block Design ◽  
Breeding Strategy ◽  
Root Tip ◽  
Environment Interaction ◽  
Randomized Block Design ◽  
National Market ◽  
New Varieties ◽  
The Individual

Carrots are among the most planted vegetables in Brazil, which represents importance in the national market. This crop can be grown in conventional and agroecological systems, and studies to improve productivity, disease resistance and root quality in agroecological cropping systems are important. The aim of the present work was to estimate genetic parameters that provide a breeding strategy in the search for the development of new varieties of carrot adapted to the conditions of Distrito Federal’s agroecology cultivation. Considering data from tests performed in areas of agroecology cultivation (Natural Agriculture-NA and Organic Agriculture-OA), the following characteristics were evaluated: incidence of leaf blight-LB, incidence of root cracking-CRACK, root length-COMP, format of root tip-TP, format of root shoulder-TO, measure of the color of the a* xylem parameter-a*X, measure of the color of the a* phloem parameter-a*F. Traits were evaluated in 100 half-sib progenies derived from Brasília cultivar, using a completely randomized block design. For the characters COMP, a*X, a*F, TP and TO, the treatment X environment interaction was significant according to the results from test F. The values of the individual variance analyses presented significant effect for the following characteristics: COMP, a*X, TP, TO, LB for NA system, and COMP, a*X, a*F, TP for OA system. In NA system, the values of heritability estimates-ha² for the plant characters fluctuated from 65.66 to 25.52% and, in the OA system, the ha² of the characters a*X, was 81.13%. Estimates of genetic gain per cycle for the characters a*X and a*F were lower in NA system than the estimates observed in OA system.  

scholarly journals Genetic parameters and simultaneous selection for root yield, adaptability and stability of cassava genotypes

2013 ◽  
Vol 48 (12) ◽  
pp. 1562-1568 ◽  
Author(s):  
João Tomé de Farias Neto ◽  
Elisa Ferreira Moura ◽  
Marcos Deon Vilela de Resende ◽  
Pedro Celestino Filho ◽  
Sebastião Geraldo Augusto
Keyword(s):  
Genetic Parameters ◽  
Mixed Model ◽  
Block Design ◽  
Genotypic Variation ◽  
Root Yield ◽  
Growing Seasons ◽  
Randomized Block Design ◽  
Simultaneous Selection ◽  
Selection For ◽  
Mixed Model Methodology

The objective of this work was to estimate genetic parameters and to evaluate simultaneous selection for root yield and for adaptability and stability of cassava genotypes. The effects of genotypes were assumed as fixed and random, and the mixed model methodology (REML/Blup) was used to estimate genetic parameters and the harmonic mean of the relative performance of genotypic values (HMRPGV), for simultaneous selection purposes. Ten genotypes were analyzed in a complete randomized block design, with four replicates. The experiment was carried out in the municipalities of Altamira, Santarém, and Santa Luzia do Pará in the state of Pará, Brazil, in the growing seasons of 2009/2010, 2010/2011, and 2011/2012. Roots were harvested 12 months after planting, in all tested locations. Root yield had low coefficients of genotypic variation (4.25%) and broad-sense heritability of individual plots (0.0424), which resulted in low genetic gain. Due to the low genotypic correlation (0.15), genotype classification as to root yield varied according to the environment. Genotypes CPATU 060, CPATU 229, and CPATU 404 stood out as to their yield, adaptability, and stability.

scholarly journals Comportamento de genótipos de maturação precoce de cana-de-açúcar na Zona da Mata de Pernambuco

2016 ◽  
Vol 7 (3) ◽  
pp. 311
Author(s):  
Aurélia Pietrina Costa Albuquerque ◽  
Gerson Quirino Bastos ◽  
João Andrade Dutra Filho ◽  
Djalma Euzébio Simões Neto ◽  
Leonam José Silva ◽  
...  
Keyword(s):  
Genetic Parameters ◽  
Block Design ◽  
Soluble Solids ◽  
Early Maturation ◽  
Commercial Cultivation ◽  
Randomized Block Design ◽  
Solids Content ◽  
High Possibility ◽  
Early Harvest ◽  
Selection Of

In sugarcane commercial cultivation the knowledge related to genotypes performance in different harvest seasons are essential for the identification of early genotypes which, when selected, will contribute to a significant increase in agroindustrial productivity. This study aimed to evaluate the agroindustrial performance of 26 sugarcane genotypes and to select genotypes that stood out for early maturation and a consequently early harvest. The experiments were conducted at ‘Olho D’gua’farm in the ‘Zona da Mata’ region, north of Pernambuco state. A randomized block design with four replications was used and the evaluated variables were: tons of pol per hectare (TPH), tons of sugarcane per hectare (TCH), fiber (FIB), adjusted pol% (PCC), soluble solids content (BRIX) and total recoverable sugar (ATR). The variance analysis and estimationof the genetic parameters were carried out, grouping the genotypes according to Scott-Knott´s test and a total economic analysis was realized. The average heritability for TPH and TCH indicates high possibility of success in the selection of early and highly productive genotypes. It was observed that the genotypes RB92579, RB867515, RB75126, RB942991, SP81-3250, RB93509, RB72454 and RB863129 presented better performance for an early harvest.

scholarly journals GENETIC GAIN FROM DIFFERENT SELECTION METHODS IN Eucalyptus macarthurii PROGENIES IN DIFFERENT ENVIRONMENTS

CERNE ◽  
2016 ◽  
Vol 22 (3) ◽  
pp. 299-308 ◽  
Author(s):  
Mara Luana Engel ◽  
Antônio Rioyei Higa ◽  
Gisela Pedrassani Andrejow ◽  
Paulo César Flôres Junior ◽  
Izabele Domingues Soares
Keyword(s):  
Genetic Gain ◽  
Genetic Parameters ◽  
Mixed Model ◽  
Phenotypic Expression ◽  
Seed Orchard ◽  
Joint Analysis ◽  
Selection Methods ◽  
Effective Population ◽  
Clonal Seed Orchard ◽  
Selection Of

ABSTRACT The aims of this research was to estimate genetic parameters of Eucalyptus macarthurii progenies and to predict genetic gain for different selection methods. In order to evaluate the gains, eleven progenies tests were studied. These tests were installed in 1997, in randomized blocks design, in two sites, with 5 replicates of five plants per plot. The progenies were evaluated, from the first to the eighth year, regarding the variable diameter at breast height (DBH). The genetic parameters were estimated using the mixed model procedure (REML/BLUP). The selection of the progenies for establishing a Clonal Seed Orchard was based on the analysis by location, joint analysis and on the harmonic mean of the relative performance of genotypic values (HMRPGV) with different selection intensities among and within families: three, four, five and six individuals per progeny with the selection of the top 30 individuals, taking into consideration the effective population size (N e ). The best age to carry out the selection was seven years old, however, early selection can be made from age two onwards. Each environment characteristics influenced progenies phenotypic expression, so the higher gains in balance with N e , were estimated with the selection of individuals for each site, and the selection of five or six individuals per progeny.

Sign in / Sign up

Export Citation Format

Share Document