scholarly journals Genetic parameters and simultaneous selection for root yield, adaptability and stability of cassava genotypes

2013 ◽  
Vol 48 (12) ◽  
pp. 1562-1568 ◽  
Author(s):  
João Tomé de Farias Neto ◽  
Elisa Ferreira Moura ◽  
Marcos Deon Vilela de Resende ◽  
Pedro Celestino Filho ◽  
Sebastião Geraldo Augusto
Keyword(s):  
Genetic Parameters ◽  
Mixed Model ◽  
Block Design ◽  
Genotypic Variation ◽  
Root Yield ◽  
Growing Seasons ◽  
Randomized Block Design ◽  
Simultaneous Selection ◽  
Selection For ◽  
Mixed Model Methodology

The objective of this work was to estimate genetic parameters and to evaluate simultaneous selection for root yield and for adaptability and stability of cassava genotypes. The effects of genotypes were assumed as fixed and random, and the mixed model methodology (REML/Blup) was used to estimate genetic parameters and the harmonic mean of the relative performance of genotypic values (HMRPGV), for simultaneous selection purposes. Ten genotypes were analyzed in a complete randomized block design, with four replicates. The experiment was carried out in the municipalities of Altamira, Santarém, and Santa Luzia do Pará in the state of Pará, Brazil, in the growing seasons of 2009/2010, 2010/2011, and 2011/2012. Roots were harvested 12 months after planting, in all tested locations. Root yield had low coefficients of genotypic variation (4.25%) and broad-sense heritability of individual plots (0.0424), which resulted in low genetic gain. Due to the low genotypic correlation (0.15), genotype classification as to root yield varied according to the environment. Genotypes CPATU 060, CPATU 229, and CPATU 404 stood out as to their yield, adaptability, and stability.

scholarly journals Selection of corn cultivars for yield, stability, and adaptability in the state of Amazonas, Brazil

2017 ◽  
Vol 52 (6) ◽  
pp. 455-463 ◽  
Author(s):  
Inocencio Junior de Oliveira ◽  
André Luiz Atroch ◽  
Miguel Costa Dias ◽  
Lauro José Guimarães ◽  
Paulo Evaristo de Oliveira Guimarães
Keyword(s):  
Grain Yield ◽  
Genetic Parameters ◽  
Block Design ◽  
The State ◽  
Environment Interaction ◽  
Growing Seasons ◽  
Randomized Complete Block Design ◽  
Selection For ◽  
Genetic Value ◽  
Selection Of

Abstract: The objective of this work was to evaluate corn cultivars grown in the state of Amazonas, Brazil, which simultaneously show high grain yield, adaptability, and stability. The trials were carried out in seven environments in the state of Amazonas, in a randomized complete block design, with two replicates. The grain yield of 30 corn cultivars was evaluated in four growing seasons, from 2011/2012 to 2014/2015. The genetic parameters were estimated by the REML/Blup methodology. The selection for adaptability and stability was based on the predicted genetic value and on the harmonic mean of the relative performance of the genetic values. Despite the existence of genotype x environment interaction, cultivars with high adaptability and stability were identified. Iranduba - lowland, in 2011/2012 and 2014/2015 - and Rio Preto da Eva - upland, in 2012/2013 - stood out as favorable environments, while Iranduba - upland, in 2011/2012 and 2012/2013 - and Manaus - upland, in 2012/2013 and 2013/2014 - were classified as unfavorable environments. The single-cross hybrid BRS 1055 showed productive superiority and high stability in this region. The Sint 10771, Sint 10781, and Sint 10699 synthetic varieties showed high adaptability. BRS Caimbé shows specific adaptability to cropping in upland environments of the state of Amazonas, Brazil.

scholarly journals Estimation of genetic parameters in rubber progenies

2012 ◽  
Vol 12 (3) ◽  
pp. 185-190 ◽  
Author(s):  
Cecília Khusala Verardi ◽  
Marcos Deon Vilela de Resende ◽  
Reginaldo Brito da Costa ◽  
Paulo de Souza Gonçalves
Keyword(s):  
Genetic Variability ◽  
Genetic Parameters ◽  
Block Design ◽  
Rubber Tree ◽  
Selection Procedure ◽  
Randomized Block Design ◽  
Secondary Traits ◽  
Selection For ◽  
The Individual ◽  
Progeny Performance

This study was designed to evaluate the genetic variability, the potential for rubber yield and secondary traits of rubber tree progenies at three locations in the state of Sao Paulo. The experiments were conducted in a randomized block design with 22 progenies and 6 replications. At the age of three years, the progenies were evaluated for rubber yield, girth growth and total number of latex vessel rings. The results showed the existence of genetic variability among progenies for each location separately as well as between locations, with differences in the progeny performance for the traits. The individual heritabilities calculated for rubber yield, girth growth and total number of latex vessel rings (0.30, 0.63 and 0.29, respectively), associated with high genetic gains with selection for the traits studied at each site, showed that the populations can be considered suitable for the rubber breeding program, provided that an appropriate selection procedure is used.

scholarly journals Adaptability and stability of early carioca beans by mixed models

2020 ◽  
Vol 36 ◽  
Author(s):  
Thalyson Vasconcelos Lima ◽  
Paulo Ricardo Dos Santos ◽  
Tâmara Rebecca Albuquerque De Oliveira ◽  
Maxwel Rodrigues Nascimento ◽  
Kleyton Danilo da Silva Costa ◽  
...  
Keyword(s):  
Genetic Parameters ◽  
Mixed Model ◽  
Block Design ◽  
Phenotypic Expression ◽  
Environment Interaction ◽  
Randomized Block Design ◽  
Specific Performance ◽  
Superior Genotypes ◽  
The Mean ◽  
Selection Of

The genotype x environment interaction represents one of the major selection challenges due to the difficulty in identifying effectively superior genotypes. The present study aimed at estimating genetic parameters and selecting genotypes of early Carioca beans by analyzing simultaneous attributes, including yield, adaptability, and stability. In the agricultural year of 2015 and 2016, three trials were conducted, using a randomized block design, with three repetitions each, in the Agreste and Sertao regions of Pernambuco State. The genetic parameters were estimated using the mixed model procedure, and the selection was based on the harmonic mean of the relative performance of genetic values (MHPRVG, abbreviation in Portuguese) method. The environments influenced the phenotypic expression of the bean genotypes during both years, setting a specific adaptation. The mean heritability of the genotypes regarding yield exhibited low magnitude values  in the trials of 2015 (5.78%) and 2016 (13.77%), indicating costly conditions for the selection of the improved genotypes. Genotype CNFC 15856 was selected, considering the genetic gain predicted for yield, by the average and specific performance in the three environments, and by the simultaneous attributes of yield, adaptability, and stability. The MHPRVG method enables the optimized selection of genotypes considering yield, stability, and adaptability; therefore, it should be included in the recommended selective criteria for agronomically superior genotypes in commercial plantations.

scholarly journals Estimation of genetic parameters and selection of Brachiaria humidicola progenies using a selection index

2012 ◽  
Vol 12 (4) ◽  
pp. 237-244 ◽  
Author(s):  
Ulisses José de Figueiredo ◽  
José Airton Rodrigues Nunes ◽  
Cacilda Borges do Valle
Keyword(s):  
Genetic Parameters ◽  
Nutritive Value ◽  
Agronomic Traits ◽  
Block Design ◽  
Selection Index ◽  
Brachiaria Humidicola ◽  
Randomized Block Design ◽  
The Mean ◽  
Selection For ◽  
Selection Of

The objectives of this study were to estimate genetic parameters for agronomic and nutritive value traits for leaves and stems of Brachiaria humidicola progenies and to compare the selection using an additive index considering the agronomic traits alone or combined with the main nutritive value traits. Fifty progenies of the cross cv. BRS Tupi x H31 were evaluated. The experiment was arranged in a randomized block design with eight replications. The forage was cut seven times, at intervals of 30 - 35 days in the rainy season and two intervals of 60 days in the dry season. Trait variability among the progenies was confirmed. The mean progeny heritability ranged from 49.14% to 75.56% for the agronomic and from 19.59% to 71.11% for nutritive value traits. Nine of the ten best lines coincided in the selection for agronomic traits alone and in the selection including the main traits of nutritive value.

Analysis of Synergistic and Antagonistic Effects of Herbicides Using Nonlinear Mixed-Model Methodology

2004 ◽  
Vol 18 (2) ◽  
pp. 464-472 ◽  
Author(s):  
David C. Blouin ◽  
Eric P. Webster ◽  
Wei Zhang
Keyword(s):  
Repeated Measures ◽  
Mixed Model ◽  
Block Design ◽  
Nonlinear Function ◽  
Nonlinear Mixed Model ◽  
Antagonistic Effects ◽  
Randomized Block Design ◽  
Using Data ◽  
Mixed Model Methodology ◽  
Proc Nlmixed

When herbicides are applied in mixture, and infestation by weeds is less than expected compared with when herbicides are applied alone, a synergistic effect is said to exist. The inverse response is described as being antagonistic. However, if the expected response is defined as a multiplicative, nonlinear function of the means for the herbicides when applied alone, then standard linear model methodology for tests of hypotheses does not apply directly. Consequently, nonlinear mixed-model methodology was explored using the nonlinear mixed-model procedure (PROC NLMIXED) of SAS System®. Generality of the methodology is illustrated using data from a randomized block design with repeated measures in time. Nonlinear mixed-model estimates and tests of synergistic and antagonistic effects were more sensitive in detecting significance, and PROC NLMIXED was a versatile tool for implementation.

scholarly journals EARLY SPRING APPLICATION OF AMINOETHOXYVINILGLYCINE (AVG) INCREASES FRUIT SET AND YIELD OF ‘ROCHA’ PEARS

2017 ◽  
Vol 39 (4) ◽  
Author(s):  
MATEUS DA SILVEIRA PASA ◽  
BRUNO CARRA ◽  
CARINA PEREIRA DA SILVA ◽  
MARLISE NARA CIOTTA ◽  
ALBERTO FONTANELLA BRIGHENTI ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Fruit Set ◽  
Block Design ◽  
Quality Attributes ◽  
Fruit Weight ◽  
Early Spring ◽  
Full Bloom ◽  
Growing Seasons ◽  
Randomized Block Design ◽  
Return Bloom

ABSTRACT The low fruit set is one of the main factors leading to poor yield of pear orchards in Brazil. Ethylene is associated with abscission of flowers and fruitlets. Then, the application of ethylene synthesis inhibitors, such as AVG, is a potential tool to increase fruit set of pears. The objective of this study was to evaluate the effect of AVG, sprayed at different rates and timings, on fruit set, yield and fruit quality of ‘Rocha’ pear. The study was performed in a commercial orchard located in the municipality of São Joaquim, SC, during the growing seasons of 2014/2015 and 2015/2016. Plant material consisted of ‘Rocha’ pear trees grafted on quince rootstock ‘BA29’. AVG was tested at different rates (60 mg L-1 and 80 mg L-1) and timings [full bloom, one week after full bloom (WAFB), and two WAFB), either alone or in combination. The experiment was arranged in a randomized block design, with at least five single-tree replications. The fruit set, number of fruit per tree, yield, estimated yield, fruit weight, return bloom, and fruit quality attributes were assessed. Fruit set and yield were consistently increased by single applications of AVG at 60 and 80 mg L-1 at both one and two weeks after full bloom, without negatively affecting fruit quality attributes and return bloom.

scholarly journals Genetic parameters and estimated genetic gains in young rubber tree progenies

2013 ◽  
Vol 48 (4) ◽  
pp. 411-416 ◽  
Author(s):  
Cecília Khusala Verardi ◽  
Erivaldo José Scaloppi Junior ◽  
Guilherme Augusto Peres Silva ◽  
Lígia Regina Lima Gouvêa ◽  
Paulo de Souza Gonçalves
Keyword(s):  
Genetic Gain ◽  
Genetic Parameters ◽  
Block Design ◽  
Rubber Tree ◽  
First Year ◽  
Genetic Gains ◽  
Selection Gain ◽  
Randomized Block Design ◽  
Using Data ◽  
Selection Of

The objective of this work was to assess the genetic parameters and to estimate genetic gains in young rubber tree progenies. The experiments were carried out during three years, in a randomized block design, with six replicates and ten plants per plot, in three representative Hevea crop regions of the state of São Paulo, Brazil. Twenty-two progenies were evaluated, from three to five years old, for rubber yield and annual girth growth. Genetic gain was estimated with the multi-effect index (MEI). Selection by progenies means provided greater estimated genetic gain than selection based on individuals, since heritability values of progeny means were greater than the ones of individual heritability, for both evaluated variables, in all the assessment years. The selection of the three best progenies for rubber yield provided a selection gain of 1.28 g per plant. The genetic gains estimated with MEI using data from early assessments (from 3 to 5-year-old) were generally high for annual girth growth and rubber yield. The high genetic gains for annual girth growth in the first year of assessment indicate that progenies can be selected at the beginning of the breeding program. Population effective size was consistent with the three progenies selected, showing that they were not related and that the population genetic variability is ensured. Early selection with the genetic gains estimated by MEI can be made on rubber tree progenies.

scholarly journals Plant selection in F2 segregating populations of papaya from commercial hybrids

2012 ◽  
Vol 12 (3) ◽  
pp. 191-198 ◽  
Author(s):  
Eder Jorge Oliveira ◽  
Gilberto de Andrade Fraife Filho ◽  
Juan Paulo Xavier de Freitas ◽  
Jorge Luiz Loyola Dantas ◽  
Marcos Deon Vilela de Resende
Keyword(s):  
Genetic Parameters ◽  
Mixed Model ◽  
Soluble Solids ◽  
Fruit Firmness ◽  
Plant Selection ◽  
F2 Population ◽  
The Common ◽  
Mixed Model Methodology ◽  
Fruit Diameter ◽  
Selection Of

The objective of this paper was to estimate the genetic parameters and additive genetic values in segregating populations of papaya using the mixed model methodology. Two F2 populations from Tainung and Calimosa hybrids were evaluated. The experimental design was an augmented block with four replicates, and Golden and Calimosa cultivars were the common treatment. Estimates of individual heritability were high for fruit length (FL) and weight (FW), moderate for fruit diameter (FD), and low for total soluble solids (TSS) and fruit firmness (FF). Considering FF and TSS as main traits for selection, genotypes of Calimosa-F2 population showed better performance to FF, but worse concerning TSS. It was selected 18.3% and 24.6% of plants from Tainung-F2 and Calimosa-F2 populations, respectively. Negative correlation between TSS and FF was not able to reduce the genetic gains. The segregating populations from Calimosa hybrid are more promising for the selection of papaya lines.

scholarly journals Soil uses in the sugarcane fallow period to improve chemical and physical properties of two latosols (oxisols)

2012 ◽  
Vol 36 (1) ◽  
pp. 283-294 ◽  
Author(s):  
Carolina Fernandes ◽  
José Eduardo Corá ◽  
Adolfo Valente Marcelo
Keyword(s):  
Physical Properties ◽  
Soil Aggregates ◽  
Block Design ◽  
Chemical Properties ◽  
Aggregate Stability ◽  
Fallow Period ◽  
Growing Seasons ◽  
Randomized Block Design ◽  
Sunn Hemp ◽  
In The Beginning

Sugarcane production should be integrated with crop diversification with a view to competitive and sustainable results in economic, social and environmental aspects. The purpose of this study was to assess the influence of different soil uses during the sugarcane fallow period on the chemical and physical properties of eutroferric Red Latosol - LVef (Oxisol) and Acric Latosol - LVw (Acric Oxisol), in Jaboticabal, São Paulo State, Brazil (21º14'05'' S, 48º17'09'' W, 600 m asl). A randomized block design was used with five replications and four treatments, consisting of different soil uses (crops) in the sugarcane fallow period: soybean only, soybean/fallow/soybean, soybean/millet/soybean, and soybean/sunn hemp/soybean. After two soybean crops, the LVef chemical properties remained at intermediate to high levels; while those of the LVw, classified as intermediate to high in the beginning, increased to high levels. Thus, the different soil uses during the sugarcane fallow period allowed the maintenance of LVef fertility levels and the improvement of those of the LVw. Two soybean crops increased macroporosity in the 0.0-0.1 m layer of the LVef; reduced soil aggregates in the 0.0-0.1 and 0.1-0.2 m layers of both soils, and reduced aggregate stability in these two layers of the LVw. Planting pearl millet or sunn hemp between the two soybean growing seasons promoted the formation of larger soil aggregates in the surface layer (0.0-0.1 m) of the LVw.

scholarly journals Interactions Between Herbicide Application and Timing of Nitrogen Fertilization in Maize Hybrids

2019 ◽  
Vol 11 (9) ◽  
pp. 21
Author(s):  
Guilherme V. Pimentel ◽  
Silvino G. Moreira ◽  
Mateus O. T. de Avila ◽  
Antonio Henrique F. de Carvalho ◽  
Alessandro A. P. da Silva ◽  
...  
Keyword(s):  
Nitrogen Fertilization ◽  
No Reduction ◽  
Block Design ◽  
Climatic Conditions ◽  
Limited Information ◽  
Herbicide Application ◽  
Maize Hybrids ◽  
Growing Seasons ◽  
Randomized Block Design ◽  
Different Levels

Maize hybrids have different levels of tolerance to the herbicide nicosulfuron, depending on the dose, the environment, the phenological stage of the plant and the timing of nitrogen fertilization, and phytotoxic effects can occur without proper management. There is also limited information on the selectivity of current genetically modified hybrids for other recommended herbicides, such as tembotrione. Thus, the objective of this study was to evaluate the effects of herbicides (tembotrione and nicosulfuron) and the timing of nitrogen fertilization on the yield of maize hybrids. The experimental design was a randomized block design, in a 4 × 2 factorial arrangement, with 4 replicates. The treatments consisted of four treatments [weeding; nicosulfuron + atrazine (20 and 32 + 1250 g ha-1 ai) and tembotrione + atrazine (75.6 + 1250 g ha-1 ai)] and two nitrogen fertilization times (0 and 7 days after application). Maize hybrids P30F53 Leptra, DKB 230PRO3 and KWS 9004PRO2 were assessed in two growing seasons (1st and 2nd harvest) during the 2016/2017 growing season. The percentages of weed control; phytotoxicity at 7, 14 and 21 days after application (DAA); plant height; number of rows per ear; and yield at harvest were evaluated. All herbicides were more effective in controlling weeds at the 1st harvest because of favourable climatic conditions. Nitrogen fertilization can be carried out on the same day as the application of the herbicides nicosulfuron and tembotrione with no reduction in yield for the hybrids P30F53 Leptra, DKB 230PRO3 and KWS 9004PRO2.

Sign in / Sign up

Export Citation Format

Share Document