scholarly journals Perubahan Nilai Ekivalensi Mobil Penumpang Akibat Perubahan Karakteristik Operasional Kendaraan di Jalan Kota Semarang

2017 ◽  
Vol 23 (1) ◽  
pp. 69
Author(s):  
EPF. Eko Yulipriyono ◽  
Djoko Purwanto
Keyword(s):  
Heavy Vehicles ◽  
Passenger Cars ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
The Road ◽  
Road Section ◽  
Operational Characteristics ◽  
Passenger Car Equivalent ◽  
On The Road

Passenger Car Equivalent (PCE) is a conversion factor to make equal the various types of vehicles that operating on the road section into one type of vehicles i.e. passenger cars. Indonesian Highway Capacity Manual (MKJI) 1997 has set the PCE values for various types of vehicle groups either motorized. PCE values of various types of vehicles are not absolute because many factors that affect can change over time and development of automotive technology. This study aimed to find out the changes of PCE value that occurs. As for the purpose of research to determine the current number of PCE values due to the change of operational characteristics of vehicles on a highway especially for urban highways. Data analysis for the determination of PCE values used: time headway method, speed method, capacity method, and vehicle dimension method. The conclusion of this study: PCE of light vehicles (LV) = 1 still in accordance with MJKI 1997; PCE of heavy vehicles (HV) varied depending on the road types. PCE of heavy vehicles that according to MKJI 1997 is used as a median; PCE of motorcycles (MC) of MKJI 1997 need to be adjusted to 0.4 or more, particularly in the calculation of actualy traffic flow.

Determining Passenger Car Equivalent for Motorcycle at Mid-Block of Sesetan Road

2015 ◽  
Vol 776 ◽  
pp. 95-100
Author(s):  
I. Gusti Raka Purbanto
Keyword(s):  
Motor Vehicles ◽  
Heavy Vehicles ◽  
Highway Capacity ◽  
Passenger Car ◽  
Highway Capacity Manual ◽  
The Road ◽  
Traffic Conditions ◽  
Mode Share ◽  
Passenger Car Equivalent ◽  
On The Road

Motorcycle dominates traffic in Bali, particularly in urban roads, which occupy more than 85% of mode share. The three types of vehicles, i.e. motorcycles, heavy and light vehicles share the roadways together. Under mixed traffic conditions, motorcycle may be travelling in between and alongside two consecutive motor vehicles. Considering such a situation, passenger car equivalent values should be examined thoroughly. This study aims to determine passenger car equivalent (PCEs) of motorcycle at mid-block of Sesetan Road. Three approaches are used to examine the PCEs values. This study found that the PCE of motorcycles are in a range between 0.2 and 0.4. This values are about the same to the existing PCE of the Indonesian Highway Capacity Manual (1997). This study also pointed out that motorcyclists and car drivers may behave differently to the existence of motorcycles. Car drivers are more aware than motorcyclists on the existence of motorcycle on the road. Further, more samples are required to obtain comprehensive results. In addition, the presence of heavy vehicles need to be considered for future study.

scholarly journals Delay-based Passenger Car Equivalent at Signalized Intersections in Iran

2017 ◽  
Vol 29 (2) ◽  
pp. 135-142 ◽  
Author(s):  
Habibollah Nassiri ◽  
Sara Tabatabaie ◽  
Sina Sahebi
Keyword(s):  
Signalized Intersections ◽  
Simulation Software ◽  
Heavy Vehicles ◽  
Passenger Cars ◽  
Highway Capacity ◽  
Passenger Car ◽  
Highway Capacity Manual ◽  
Operational Characteristics ◽  
Passenger Car Equivalent ◽  
Traffic Operation

Due to their different sizes and operational characteristics, vehicles other than passenger cars have a different influence on traffic operations especially at intersections. The passenger car equivalent (PCE) is the parameter that shows how many passenger cars must be substituted for a specific heavy vehicle to represent its influence on traffic operation. PCE is commonly estimated using headway-based methods that consider the excess headway utilized by heavy vehicles. In this research, the PCE was estimated based on the delay parameter at three signalized intersections in Tehran, Iran. The data collected were traffic volume, travel time for each movement, signalization, and geometric design information. These data were analysed and three different models, one for each intersection, were constructed and calibrated using TRAF-NETSIM simulation software for unsaturated traffic conditions. PCE was estimated under different scenarios and the number of approach movements at each intersection. The results showed that for approaches with only one movement, PCE varies from 1.1 to 1.65. Similarly, for approaches with two and three movements, the PCE varies from 1.07 to 1.99 and from 0.76 to 3.6, respectively. In addition, a general model was developed for predicting PCE for intersections with all of the movements considered. The results obtained from this model showed that the average PCE of 1.5 is similar to the value recommended by the HCM (Highway Capacity Manual) 1985. However, the predicted PCE value of 1.9 for saturated threshold is closer to the PCE value of 2 which was recommended by the HCM 2000 and HCM 2010.

scholarly journals Car Equivalents Dependence on the Longitudinal Road Gradient on Two-lane Roads in Bosnia and Herzegovina

2017 ◽  
Vol 29 (4) ◽  
pp. 401-409 ◽  
Author(s):  
Marko Miladin Subotić ◽  
Vladan Jevđen Tubić
Keyword(s):  
Empirical Research ◽  
Free Flow ◽  
Highway Capacity ◽  
Local Conditions ◽  
Highway Capacity Manual ◽  
The Road ◽  
Literature Reviews ◽  
Passenger Car Equivalent ◽  
On The Road ◽  
Road Gradient

The main objective of this paper, based upon the extensive empirical research of free flow in local conditions, is to quantify the unfavourable impact of the flow structure on the road capacity using PCE (Passenger Car Equivalent) values as a function of longitudinal grade. Based on literature reviews and empirical research, it has been proved that the PCE value for all vehicle classes is directly correlated with the road gradient. The PCE values in free flow conditions have been determined for the approved vehicle classes. Based on the measured values, models for determining the average PCE value depending on the upward grade on two-lane roads have been developed. Comparison of the developed models in conditions of free traffic flow with the Highway Capacity Manual (HCM) models has shown lower PCE values in this research. Models for the percentage of PCE values PCE15%, PCE50% and PCE85% have also been established.

scholarly journals Comparative Analysis of Effects of Heavy Vehicles on Roads in Southern and Northern Nigeria

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
C. C. Osadebe ◽  
H. A. Quadri
Keyword(s):  
Northern Region ◽  
Design Guidelines ◽  
Traffic Volume ◽  
Southern Region ◽  
Heavy Vehicle ◽  
Heavy Vehicles ◽  
Passenger Cars ◽  
The Road ◽  
Equivalency Factors ◽  
On The Road

The prevalence of flexible pavement deterioration in the country has been adduced largely by highway researchers to trucks or heavy vehicles carrying much in excess of permitted legal limits. This study investigated levels of deterioration of Abuja-Kaduna-Kano road (Northern region) and Port Harcourt-Enugu road (Southern region) caused by heavy vehicles through a 14 day traffic counts conducted at 5 strategic points each in the Northern and Southern regions. Traffic data generated were analyzed with AASHTO Design Guidelines (1993) to evaluate Equivalent Single Axle Loads (ESALs) and Vehicle Damage effects on the road. The Traffic Volume, Average Daily Traffic (ADT), and Heavy Vehicle per day (HV/day) were estimated to be 2,063,977; 147,427; and 12,246 respectively in the Northern region, while in the Southern region they were estimated to be 750,381; 53,670; and 20,951 respectively. Motorcycles, Passenger cars, Mini-buses/Pick-ups, and Heavy vehicles constitute 18.7%, 49.7%, 23.3% and 8.31% of the total traffic volume respectively in the Northern region while in the South they constitute 4.6%, 30.1%, 26.2% and 39.1% respectively. ESALs were estimated according to AASHTO Design Guidelines in the Northern and Southern regions as 547,730 and 836,208 respectively. An average Load Equivalency Factors (LEFs) of 3.43 and 3.02 were estimated for each heavy vehicle plying the Northern and Southern roads respectively and this could explain some failures (alligator cracks, potholes, depressions, linear or longitudinal cracks along the centre line amongst others) inherent on the road.

scholarly journals Evaluation passenger car unit for motorcycle in Indonesia Highway Capacity Manual (Case study: Bandung and Semarang)

2018 ◽  
Vol 181 ◽  
pp. 06006
Author(s):  
Najid
Keyword(s):  
Traffic Density ◽  
Heavy Vehicles ◽  
Highway Capacity ◽  
Passenger Car ◽  
Highway Capacity Manual ◽  
Traffic Conditions ◽  
A Value ◽  
Passenger Car Unit ◽  
Set Up

Value of Passenger Car Unit or commonly known as PCU value is a value that is given to any vehicle that is classified into heavy vehicles, light vehicles (passenger car) and motorcycles. The value of passenger car unit on Indonesia Highway Capacity Manual (IHCM) set up in 1997 is based on a study conducted from 1980-1990 in several cities in Indonesia At the time of the study, the traffic conditions are very different to the current traffic conditions. That affects of difference traffic conditions are the composition of traffic, traffic regulations, traffic density, traffic discipline and the presence of mass transit, so that the results of traffic analysis do not always correspond to reality as there are anomalies in the determination of the level of road service (Najid, 2014). As well the incompatibility of the capacity value which is considered due to the incompatibility value of Passenger Car Units (PCU). Evaluation PCU become very important to get the value of traffic parameters into compliance with actually occur. In accordance with the traffic density is higher actually, then it is necessary to study for evaluation against PCU current value and the need to approach or to get the value of PCU more in line with current traffic conditions. Data collected at two cities, those are Bandung and Semarang. Based on analysis found PCU’s value that got from survey have difference but not all significantly with PCU value in IHCM.

scholarly journals PENGARUH SUKARELAWAN PENGATUR LALU LINTAS TERHADAP KINERJA SIMPANG TAK BERSINYAL GANESHA SURAKARTA

2019 ◽  
Vol 19 (2) ◽  
pp. 133-142
Author(s):  
Gus Maelan Irfana ◽  
Nurul Hidayati ◽  
Sri Sunarjono
Keyword(s):  
Traffic Control ◽  
Traffic Congestion ◽  
Motor Vehicle ◽  
Positive Influence ◽  
Degree Of Saturation ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
The Road ◽  
On The Road ◽  
The City

Abstract Traffic congestion in the City of Surakarta gave rise to a phenomenal figure among motor vehicle drivers, called the Traffic Control Volunteers or abbreviated as Supeltas. This Supeltas is present on the road to help organize the movement of traffic, as happened at the Surakarta Ganesha Unsignalized Intersection. This study aims to determine the influence of the existence of Supeltas on capacity, degree of saturation, delay, and queuing opportunities that occur at the intersection. The analysis was carried out using the 1997 Indonesian Highway Capacity Manual. The results showed that the intersection without Supeltas had a capacity of 3,114.03 pcu/hour and a degree of saturation of 1.47, while the same intersection but with Supeltas had a capacity of 3,136.81 pcu/hour and a degree of saturation of 1.51. These results indicate that Supeltas has a positive influence on the performance of the intersection. Nevertheless, the degree of saturation in the location increased due to the increase in traffic volume as well as increased capacity. Keywords: unsignalized intersection, intersection performance, intersection capacity, degree of saturation  Abstrak Kemacetan lalu lintas di Kota Surakarta memunculkan sosok fenomenal di kalangan pengendara kendaraan bermotor, yang disebut Sukarelawan Pengatur Lalu Lintas atau disingkat Supeltas. Supeltas ini hadir di jalan untuk membantu mengatur pergerakan lalu lintas, seperti yang terjadi di Simpang Tak Bersinyal Ganesha Surakarta. Penelitian ini bertujuan untuk menentukan pengaruh keberadaan Supeltas terhadap kapasitas, derajat kejenuhan, tundaan, dan peluang antrian yang terjadi di simpang tersebut. Analisis dilakukan dengan menggu-nakan Manual Kapasitas Jalan Indonesia 1997. Hasil analisis menunjukkan bahwa simpang tanpa Supeltas memiliki kapasitas sebesar 3.114,03 smp/jam dan derajat kejenuhan 1,47, sedangkan simpang yang sama tetapi dengan Supeltas memiliki kapasitas sebesar 3.136,81 smp/jam dan derajat kejenuhan 1,51. Hasil tersebut menunjukkan bahwa Supeltas mempunyai pengaruh positif terhadap kinerja simpang. Meskipun demikian, derajat kejenuhan di lokasi tersebut meningkat karena bertambahnya volume lalu lintas di samping kapasitas yang juga meningkat. Kata-kata kunci: simpang tak bersinyal, kinerja simpang, kapasitas simpang, derajat kejenuhan

scholarly journals MICROSIMULATION-BASED PASSENGER CAR EQUIVALENTS FOR HEAVY VEHICLES DRIVING TURBO-ROUNDABOUTS

Transport ◽  
2016 ◽  
Vol 31 (2) ◽  
pp. 295-303 ◽  
Author(s):  
Orazio Giuffrè ◽  
Anna Granà ◽  
Sergio Marino ◽  
Fabio Galatioto
Keyword(s):  
Geometric Design ◽  
Heavy Vehicles ◽  
Passenger Cars ◽  
Highway Capacity ◽  
Passenger Car ◽  
Operational Conditions ◽  
Highway Capacity Manual ◽  
Traffic Conditions ◽  
Scenarios Simulation

Due to its geometric design, turbo-roundabouts impose greatest constraints to the vehicular trajectories; by consequence, one can expect a more unfavourable impact of heavy vehicles on the traffic conditions than on other types of roundabouts. The present paper addresses the question of how to estimate Passenger Car Equivalents (PCEs) for heavy vehicles driving turbo-roundabouts. The microsimulation approach used revealed as a useful tool for evaluating the variation of quality of traffic in presence of mixed fleets (different percentages of heavy vehicles). Based on the output of multiple runs of several scenarios simulation, capacity functions for each entry lane of the turbo-roundabout were developed and variability of the PCEs for heavy vehicles were calculated by comparing results for a fleet of passenger cars only with those of the mixed fleet scenarios. Results show a dependence of PCEs for heavy vehicles on operational conditions, which characterise the turbo-roundabout. Assuming the values of PCEs for roundabouts provided by the 2010 Highway Capacity Manual (HCM), depending on entering manoeuvring underestimation and overestimation of the effect of heavy vehicles on the quality of traffic conditions have been found.

Effect of Lane Width on Speeds of Cars and Heavy Vehicles in Work Zones

2005 ◽  
Vol 1920 (1) ◽  
pp. 41-48 ◽  
Author(s):  
Madhav V. Chitturi ◽  
Rahim F. Benekohal
Keyword(s):  
Flow Speed ◽  
Heavy Vehicles ◽  
Work Zones ◽  
Passenger Cars ◽  
Highway Capacity ◽  
Speed Reduction ◽  
Interstate Highways ◽  
Highway Capacity Manual ◽  
Traffic Stream ◽  
Lane Width

Traffic data were collected from 11 work zones on Interstate highways in Illinois in which one of the two lanes was open. The reductions in free-flow speed (FFS) due to narrow lanes and lateral clearances in work zones were studied. It was found that the reductions in FFSs of vehicles in work zones because of narrow lanes were higher than the reductions given in the Highway Capacity Manual for basic freeway sections. The data also showed that the narrower the lane was, the greater the speed reduction was. The data showed that the FFSs of heavy vehicles were statistically lower than the FFSs of passenger cars, even though the speed limit was the same for both types of vehicles. In addition, the reduction in the FFSs of heavy vehicles was greater than the reduction in the FFSs of passenger cars. This greater reduction in the speed of heavy vehicles affected the performance of the traffic stream in work zones. Thus, it should be considered in the computation of the passenger car equivalence for heavy vehicles. It is recommended that 10, 7, 4.4, and 2.1 mph be used for speed reduction in work zones for lane widths of 10, 10.5, 11, and 11.5 ft, respectively.

scholarly journals Traffic Assessment for Unsignalized Intersection Under Influence for Side Friction on Padang Lawas, North Sumatera

2020 ◽  
Vol 1 (2) ◽  
pp. 1-7
Author(s):  
Muchammad Zaenal Muttaqin ◽  
Desi Yanti Futri Citra Hasibuan
Keyword(s):  
Degree Of Saturation ◽  
Effective Width ◽  
Total Flow ◽  
Highway Capacity ◽  
Highway Capacity Manual ◽  
The Road ◽  
Unsignalized Intersections ◽  
On The Road ◽  
Side Friction ◽  
North Sumatra

An unsignalized intersection is a part of a road where currents from different directions or directions meet. There was a conflict between currents from theopposite direction and intersecting each other, resulting in congestion along the arms of the intersection. Likewise, at the intersection of four arms without a signal at Sibuhuan Market, Padang Lawas Regency, North Sumatra, there is a congestion caused by the reduction in the effective width of the road due to parking on the road. At the intersection of four arms without a signal at Sibuhuan Market, Padang Lawas Regency, North Sumatra, there is a congestion caused by side obstacles, a high vehicle population that is not matched by the availability of adequate infrastructure so this research aims to analyze the performance of the four-arm intersection without a signal. based on Indonesian Highway Capacity Manual (MKJI 1997) and analyzes them to improve the performance of these unsignalized intersections. The analysis of the results showed that the intersection performance for the unsigned intersection conditions in the existing condition with the parking on the side of the road which reduced the effective width, the maximum total flow was 2341 pcu / hour, capacity (C) = 2707.06 pcu / hour, and the degree of saturation (DS) = 0.86, intersection delay (D) = 14.62 seconds / pcu and queuing opportunity (QP) 30.03 - 59.32%. Therefore, it is necessary to recalculate with various alternatives so that the DS value meets the requirements of the Indonesian Highway Capacity Manual, which is < 0.75.

Sign in / Sign up

Export Citation Format

Share Document