scholarly journals Photosensitization of TiO2 P25 with CdS Nanoparticles for Photocatalytic Applications

2017 ◽  
Vol 62 (2) ◽  
pp. 841-849 ◽  
Author(s):  
A. Trenczek-Zając ◽  
J. Banaś ◽  
K. Świerczek ◽  
K. Zazakowny ◽  
M. Radecka
Keyword(s):  
Molar Fraction ◽  
Fundamental Absorption Edge ◽  
Coupled System ◽  
Precipitation Method ◽  
Cds Nanoparticles ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Xrd Patterns ◽  
Means Of Transmission ◽  
Better Than

AbstractA TiO2/CdS coupled system was prepared by mixing the TiO2P25 with CdS synthesized by means of the precipitation method. It was found that the specific surface area (SSA) of both components is extremely different and equals 49.5 for TiO2and 145.4 m2·g−1for CdS. The comparison of particle size distribution and images obtained by means of transmission electron microscopy (TEM) showed agglomeration of nanocomposites. X-ray diffraction (XRD) patterns suggest that CdS crystallizes in a mixture of cubic and hexagonal phases. Optical reflectance spectra revealed a gradual shift of the fundamental absorption edge towards longer wavelengths with increasing CdS molar fraction, which indicates an extension of the absorption spectrum of TiO2. The photocatalytic activity in UV and UV-vis was tested with the use of methyl orange (MO). The Langmuir–Hinshelwood model described well the photodegradation process of MO. The results showed that the photocatalytic behaviour of the TiO2/CdS mixture is significantly better than that of pure nanopowders.

Microstructure Characterization of Metal Mixed Oxides

MRS Advances ◽  
2017 ◽  
Vol 2 (64) ◽  
pp. 4025-4030 ◽  
Author(s):  
T. Kryshtab ◽  
H. A. Calderon ◽  
A. Kryvko
Keyword(s):  
Mixed Oxides ◽  
Profile Analysis ◽  
Atomic Resolution ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Reconstruction Procedure ◽  
Transmission Electron ◽  
Xrd Patterns ◽  
Co Precipitation

ABSTRACTThe microstructure of Ni-Mg-Al mixed oxides obtained by thermal decomposition of hydrotalcite-like compounds synthesized by a co-precipitation method has been studied by using X-ray diffraction (XRD) and atomic resolution transmission electron microscopy (TEM). XRD patterns revealed the formation of NixMg1-xO (x=0÷1), α-Al2O3 and traces of MgAl2O4 and NiAl2O4 phases. The peaks profile analysis indicated a small grain size, microdeformations and partial overlapping of peaks due to phases with different, but similar interplanar spacings. The microdeformations point out the presence of dislocations and the peaks shift associated with the presence of excess vacancies. The use of atomic resolution TEM made it possible to identify the phases, directly observe dislocations and demonstrate the vacancies excess. Atomic resolution TEM is achieved by applying an Exit Wave Reconstruction procedure with 40 low dose images taken at different defocus. The current results suggest that vacancies of metals are predominant in MgO (NiO) crystals and that vacancies of Oxygen are predominant in Al2O3 crystals.

Synthesis of RePO4 (Re=La, Nd, Pr, or Y) Nanowires by Chemical Precipitation in Nanochannels

2011 ◽  
Vol 181-182 ◽  
pp. 495-500 ◽  
Author(s):  
Cheng Mu ◽  
Jun Hui He
Keyword(s):  
Rare Earth ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
Aao Template ◽  
Sem Images ◽  
Transmission Electron ◽  
Rare Earth Phosphate ◽  
Xrd Patterns ◽  
Uniform Diameter

Monodisperse nanowires of rare earth phosphates were synthesized by chemical precipitation method using anodic aluminum oxide (AAO) template. Scanning electron microscope (SEM) images indicated that rare earth phosphate nanowires are parallelly arranged in AAO template, all of which are in uniform diameter of about 50 nm. X-ray diffraction (XRD) patterns and high magnification transmission electron microscopy (HRTEM) images showed that the nanowires were polycrystal structure.

scholarly journals Solvothermal Synthesis ofGd2O3 : Eu3+Luminescent Nanowires

2010 ◽  
Vol 2010 ◽  
pp. 1-5 ◽  
Author(s):  
Guixia Liu ◽  
Song Zhang ◽  
Xiangting Dong ◽  
Jinxian Wang
Keyword(s):  
Large Scale ◽  
Hexagonal Phase ◽  
Infrared Spectrometry ◽  
Cubic Phase ◽  
X Ray Diffraction ◽  
Display Devices ◽  
Transmission Electron ◽  
Xrd Patterns ◽  
Facile Solvothermal Method ◽  
Better Than

UniformGd2O3 : Eu3+luminescent nanowires were prepared on a large scale by a facile solvothermal method using polyethylene glycol (PEG-2000) as template and ethanol as solvent; the properties and the structure were characterized. X-ray diffraction (XRD) patterns and Fourier transform infrared spectrometry (FTIR) showed that the precursors are hexagonal phaseGd(OH)3crystals, and the samples calcined at 800C°are cubic phaseGd2O3. Transmission Electron Microscopy (TEM) images indicated that the samples are nanowires with a diameter of 30 nm and a length of a few microns. Photoluminescence (PL) spectra showed that the ratio ofD50→F72toD50→F71transition peak of the calcined samples is stronger than that of the precursors, which confirmed that the color purity of theGd2O3 : Eu3+is better than that of the precursors. The as-obtainedGd2O3 : Eu3+luminescent nanowires show a strong red emission corresponding toD50→F72transition (610 nm) ofEu3+under ultraviolet excitation (250 nm), which have potential application in red-emitting phosphors and field emission display devices.

CHARACTERISTICS OF CdS NANOPARTICLES SYNTHESIZED BY SOLVOTHERMAL ROUTE WITH DIFFERENT RATIOS OF ETHYLENEDIAMINE/WATER

2005 ◽  
Vol 04 (04) ◽  
pp. 659-665
Author(s):  
JIANXI YAO ◽  
LI HONG ◽  
GAOLING ZHAO ◽  
WENJIAN WENG ◽  
GAORONG HAN
Keyword(s):  
Electron Microscopy ◽  
Cds Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Solvothermal Route ◽  
Cds Nanorods ◽  
Transmission Electron ◽  
Coordination Ability ◽  
The Difference ◽  
Xrd Patterns

CdS nanoparticles with various size and shape were synthesized through solvothermal route using different ratios of ethylenediamine/water. X-ray diffraction and transmission electron microscopy results revealed that CdS nanorods were formed by using ethylenediamine and the mixture of ethylenediamine and water as solvents. The CdS nanorods had [002] preferential orientation. When water was used as the solvent, irregular shape particles and typical XRD patterns of hexagonal CdS were observed. The produced nanoparticles displayed interesting photoluminescence feature, which were found to be sensitive to the ratio of ethylenediamine/water. It is suggested that the different coordination ability with Cd 2+ and dielectric constant of ethylenediamine and water caused different formation mechanism of CdS and led to the difference in the shape, crystallinity and optical properties of produced CdS particles.

Magnetic and dielectric properties of BiFeO3 nanoparticles

2015 ◽  
Vol 7 (2) ◽  
pp. 1393-1403
Author(s):  
Dr R.P VIJAYALAKSHMI ◽  
N. Manjula ◽  
S. Ramu ◽  
Amaranatha Reddy
Keyword(s):  
Diffuse Reflectance Spectrum ◽  
Precipitation Method ◽  
Secondary Phases ◽  
X Ray Diffraction ◽  
Bifeo3 Nanoparticles ◽  
Transmission Electron ◽  
Multiferroic Bifeo3 ◽  
Pure Phase ◽  
Simple Chemical ◽  
Co Precipitation

Single crystalline nano-sized multiferroic BiFeO3 (BFO) powders were synthesized through simple chemical co-precipitation method using polyethylene glycol (PEG) as capping agent. We obtained pure phase BiFeO3 powder by controlling pHand calcination temperature. From X-ray diffraction studies the nanoparticles were unambiguously identified to have a rhombohedrally distorted perovskite structure belonging to the space group of R3c. No secondary phases were detected. It indicates single phase structure. EDX spectra indicated the appearance of three elements Bi, Fe, O in 1:1:3. From the UV-Vis diffuse reflectance spectrum, the absorption cut-off wavelength of the BFO sample is around 558nm corresponding to the energy band gap of 2.2 eV. The size (60-70 nm) and morphology of the nanoparticles have been analyzed using transmission electron microscopy (TEM).   Linear M−H behaviour and slight hysteresis at lower magnetic field is observed for BiFeO3 nanoparticles from Vibrating sample magnetometer studies. It indicates weak ferromagnetic behaviour at room temperature. From dielectric studies, the conductivity value is calculated from the relation s = L/RbA Sm-1 and it is around 7.2 x 10-9 S/m.

Structural and morphological characterization of CdS nanoparticles

2020 ◽  
Vol 10 ◽  
Author(s):  
Manish Dwivedi ◽  
Vijay Tripathi ◽  
Dhruv Kumar ◽  
Dwijendra K. Gupta
Keyword(s):  
Blue Shift ◽  
Chemical Precipitation ◽  
Morphological Characterization ◽  
Precipitation Method ◽  
Cds Nanoparticles ◽  
Cubic Phase ◽  
Simple Chemical ◽  
Xrd Patterns ◽  
Average Size ◽  
Physical Tools

Aims: CdS nanoparticles are an attractive material having application in various field like as pigment in paints, biotag for bioimaging and many more optoelectronic as well as biological applications. Present study aims to synthesize and characterize the CdS nanoparticles to make it applicable in different areas Objectives: Preparation CdS nanoparticles by using simple and facile chemical methods and further physical and structural characterization using various physical tools Methods: In present work CdS nanoparticles has been synthesized by using rationally simple chemical precipitation method with some modi-fication on temperature and incubation time in existed methods. Characterizations were done by employing XRD, SEM, TEM, AFM tech-niques Results: Simple chemical method produces the CdS nanoparticles with the size about 100-200 nm in length and 5-10 nm in diameter. The SEM studies show that the CdS nanoparticles can agglomerate and form a continuous network like structure. The X-ray diffraction (XRD) measurements show the single-phase formation of CdS nanoparticles with the structure of cubic phase, and the broadening of XRD patterns indicates that the prepared samples are nanostructured. Our analysis on CdS nanoparticles by using transmission electron microscope and atomic force microscope (AFM) revealed that the nanoparticles form both spherical and nearly rod shaped with the average size applicable for biotagging. UV-Vis spectroscopic analysis reveals blue shift in the absorption peak probably caused by quantum confinement Conclusion: The observed CdS nanoparticles were appeared yellow in color. The XRD pattern of the CdS nanoparticles showed that the materials were of nanometric sized regime with a predominantly cubic phase along with the rod and round morphology. The study and char-acterization of CdS nanoparticles will bring us a new approach to understand biological problem by tagging nanoparticles with biomolecules and further suggests that the CdS nanoparticles formulate it more suitable biocompatible nanomaterial for biotagging and bioimaging

scholarly journals Enhanced Photocatalytic Activity of Cu2O Cabbage/RGO Nanocomposites under Visible Light Irradiation

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1712
Author(s):  
Appusamy Muthukrishnaraj ◽  
Salma Ahmed Al-Zahrani ◽  
Ahmed Al Otaibi ◽  
Semmedu Selvaraj Kalaivani ◽  
Ayyar Manikandan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Thermo Gravimetric Analysis ◽  
Visible Region ◽  
Catalytic Performance ◽  
Precipitation Method ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Dye Pollutants ◽  
Transmission Electron

Towards the utilization of Cu2O nanomaterial for the degradation of industrial dye pollutants such as methylene blue and methyl orange, the graphene-incorporated Cu2O nanocomposites (GCC) were developed via a precipitation method. Using Hummers method, the grapheme oxide (GO) was initially synthesized. The varying weight percentages (1–4 wt %) of GO was incorporated along with the precipitation of Cu2O catalyst. Various characterization techniques such as Fourier-transform infra-red (FT-IR), X-ray diffraction (XRD), UV–visible diffused reflectance (UV-DRS), Raman spectroscopy, thermo gravimetric analysis (TGA), energy-dispersive X-ray analysis (EDX), and electro chemical impedance (EIS) were followed for characterization. The cabbage-like morphology of the developed Cu2O and its composites were ascertained from field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HR-TEM). In addition, the growth mechanism was also proposed. The results infer that 2 wt % GO-incorporated Cu2O composites shows the highest value of degradation efficiency (97.9% and 96.1%) for MB and MO at 160 and 220 min, respectively. Further, its catalytic performance over visible region (red shift) was also enhanced to an appreciable extent, when compared with that of other samples.

Study on Modified Rapeseed Oil/Montmorillonite Nanocomposites

2010 ◽  
Vol 123-125 ◽  
pp. 1291-1294 ◽  
Author(s):  
Bin Lü ◽  
Jian Zhong Ma ◽  
Dang Ge Gao ◽  
Lei Hong
Keyword(s):  
Rapeseed Oil ◽  
Fourier Transforms ◽  
Raw Materials ◽  
Infrared Spectrometry ◽  
Emulsifying Properties ◽  
X Ray Diffraction ◽  
Layer Spacing ◽  
Transmission Electron ◽  
Ft Ir ◽  
Better Than

Modified rapeseed oil(MRO) was prepared by using rapeseed oil, ethylene diamine and acrylic acid as the raw materials. Modified rapeseed oil/montmorillonite(MRO/MMT) nanocomposite was prepared by using modified rapeseed oil and montmorillonite. The emulsifying properties of MRO and MRO/MMT were determined respectively. Fourier transforms infrared spectrometry (FT-IR) and Transmission Electron microscope (TEM) results showed that MRO/MMT was prepared successfully. X-ray diffraction (XRD) results showed that modified rapeseed oil could smoothly enter the interlayer of montmorillonite, and modified the montmorillonite; with an increase in the amount of montmorillonite, the layer spacing of montmorillonite in the MRO/MMT lower after the first increase. The results of emulsifying properties indicated that emulsifying properties of MRO/MMT was better than MRO.

Structural changes in titanium dioxide nanocrystals during plastic deformation

2005 ◽  
Vol 38 (5) ◽  
pp. 749-756 ◽  
Author(s):  
Ulrich Gesenhues
Keyword(s):  
Structural Changes ◽  
Crystal Size ◽  
Lower Layer ◽  
High Energy ◽  
Primary Crystal ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Hall Method ◽  
Means Of Transmission

The polygonization of 200 nm rutile crystals during dry ball-milling at 10gwas monitored in detail by means of transmission electron microscopy (TEM) and X-ray diffraction (XRD). The TEM results showed how to modify the Williamson–Hall method for a successful evaluation of crystal size and microstrain from XRD profiles. Macrostrain development was determined from the minute shift of the most intense reflection. In addition, changes in pycnometrical density were monitored. Accordingly, the primary crystal is disintegrated during milling into a mosaic of 12–35 nm pieces where the grain boundaries induce up to 1.2% microstrain in a lower layer of 6 nm thickness. Macrostrain in the interior of the crystals rises to 0.03%. The pycnometrical density, reflecting the packing density of atoms in the grain boundary, decreases steadily by 1.1%. The results bear relevance to our understanding of plastic flow and the mechanism of phase transitions of metal oxides during high-energy milling.

Synthesis of Visible-Light Responsive CdS/ZnO Nanocomposite Photocatalysts via Simple Precipitation Method

2014 ◽  
Vol 608 ◽  
pp. 224-229 ◽  
Author(s):  
Potjanaporn Chaengchawi ◽  
Karn Serivalsatit ◽  
Pornapa Sujaridworakun
Keyword(s):  
Methylene Blue ◽  
Visible Light ◽  
Photocatalytic Performance ◽  
Precipitation Method ◽  
Cds Nanoparticles ◽  
Methylene Blue Solution ◽  
X Ray Diffraction ◽  
X Ray ◽  
Blue Solution ◽  
Scanning Electron

A visible-light responsive CdS/ZnO nanocomposite photocatalyst was successfully synthesized by precipitation of CdS nanoparticles, using Cd (NO3)2 and Na2S as starting materials, on ZnO nanoparticles and then calcined at 400°C for 2 hours. The effects of the mole ratio of CdS and ZnO in the composites on their phase, morphology, and surface area were investigated by X-ray Diffraction (XRD), scanning electron microscope (SEM), Brunauer Emmett Teller method (BET), respectively. The photocatalytic degradation of methylene blue solution in the presence of composite products under visible-light irradiation was investigated. The results showed that the mole ratio of CdS and ZnO played a significant role on photocatalytic performance. The highest photocatalytic activity was obtained from the CdS/ZnO nanocomposite with mole ratio of 1:4, which is higher than that of pure CdS and pure ZnO.

Sign in / Sign up

Export Citation Format

Share Document