scholarly journals Advancing biodiesel production from microalgae Spirulina sp. by a simultaneous extraction–transesterification process using palm oil as a co-solvent of methanol

2020 ◽  
Vol 18 (1) ◽  
pp. 833-842
Author(s):  
Yano Surya Pradana ◽  
Resti Nurmala Dewi ◽  
Kanadya Di Livia ◽  
Farida Arisa ◽  
Rochim Bakti Cahyono ◽  
...  
Keyword(s):  
Palm Oil ◽  
Weight Ratio ◽  
Single Stage ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Potential Candidate ◽  
Simultaneous Extraction ◽  
Stirred Reactor ◽  
Biodiesel Feedstock ◽  
Biodiesel Quality

AbstractMicroalgae have been considered as a potential candidate for biodiesel feedstock. Single-stage simultaneous extraction–transesterification process is proposed for simpler and more effective biodiesel conversion. In this study, the experiment of biodiesel production from microalgae Spirulina sp. was performed in a batch-stirred reactor using palm oil as a co-solvent of methanol and catalyzed by potassium hydroxide at a percentage of 1 wt% (w/w of palm oil). The effects of methanol–palm oil molar ratio, palm oil–microalgae weight ratio, and temperature on biodiesel yield were investigated. The results showed that the best biodiesel yield was 85.28% (99.01% of partial biodiesel yield from palm oil and 16.69% of partial biodiesel yield from dry microalgae), obtained at a methanol–palm oil molar ratio of 10:1, a palm oil–microalgae weight ratio of 5:1, and at a temperature of 60°C. Upon comparison, the overall yield increased by 34.59% (37.73% of partial biodiesel yield from palm oil and 13.00% of partial biodiesel yield from dry microalgae) than that of the two-stage (conventional) method. Single-stage simultaneous extraction–transesterification process also reduced the number of unsaturated fatty acid components in biodiesel that will lower the biodiesel quality.

scholarly journals Biodiesel production from cotton oil using heterogeneous CaO catalysts from eggshells prepared at different calcination temperatures

2019 ◽  
Vol 8 (1) ◽  
pp. 235-244 ◽  
Author(s):  
Luciene da Silva Castro ◽  
Audrei Giménez Barañano ◽  
Christiano Jorge Gomes Pinheiro ◽  
Luciano Menini ◽  
Patrícia Fontes Pinheiro
Keyword(s):  
Cation Exchange Resin ◽  
Weight Ratio ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Calcination Temperatures ◽  
Biodiesel Synthesis ◽  
Biodiesel Quality ◽  
Cotton Oil

Abstract Biodiesel is a fuel from vegetable oil or animal fat, and is a promising substitute for petroleum-derived diesel. Transesterification is the most widely used method in biodiesel production. Eggshell is rich in calcium carbonate (CaCO3), and when it is subjected to heat treatment it results in calcium oxide (CaO). CaO from eggshells was prepared at different calcination temperatures, and characterized by X-ray diffraction, thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The obtained CaO was used as a catalyst. All catalysts showed good stability and excellent morphology for biodiesel synthesis. Catalytic activity was evaluated by the methyl transesterification reaction of cotton oil for 3 h, 9:1 methanol:oil molar ratio, 3 wt% (catalyst/oil weight ratio) catalyst and 60°C. Biodiesels showed an ester content of 97.83%, 97.23% and 98.08%, obtained from calcined eggshell at 800°C, 900°C and 1000°C, respectively. Biodiesel quality was affected by the acidity of the cation exchange resin. The kinematic viscosity of biodiesel was in accordance with specification, except for the biodiesel obtained from the calcined catalyst at 1000°C. The CaO from eggshells obtained at different calcination temperatures is promising for biodiesel synthesis.

Optimization of biodiesel production by transesterification of palm oil and evaluation of biodiesel quality

2021 ◽  
Author(s):  
Alex Soly Peter ◽  
Mathews P. Alias ◽  
Mildo P. Iype ◽  
Jerin Jolly ◽  
Vishnu Sankar ◽  
...  
Keyword(s):  
Palm Oil ◽  
Biodiesel Production ◽  
Biodiesel Quality

Calcium Methoxide Synthesis from Quick Lime Using as Solid Catalyst in Refined Palm Oil Biodiesel Production

2013 ◽  
Vol 834-836 ◽  
pp. 550-554 ◽  
Author(s):  
Warakom Suwanthai ◽  
Vittaya Punsuvon ◽  
Pilanee Vaithanomsat
Keyword(s):  
Palm Oil ◽  
Acid Methyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Solid Catalyst ◽  
Solid Base ◽  
Quick Lime ◽  
X Ray ◽  
Refined Palm Oil

In this research, calcium methoxide was synthesized as solid base catalyst from quick lime for biodiesel production. The catalyst was further characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), attenuated total reflection fourier transform (ATR-FTIR) and Energy-dispersive X-ray spectroscopies (EDX) to evaluate its performance. The transesterification of refined palm oil using calcium methoxide and the process parameters affecting the fatty acid methyl ester (FAME) content such as catalyst concentration, methanol:oil molar ratio and reaction time were investigated. The results showed that the FAME content at 97% was achieved within 3 h using 3 %wt catalyst loading, 12:1 methanol:oil molar ratio and 65 °C reaction temperature. The result of FAME suggested calcium methoxide was the promising solid catalyst for substitution of the conventional liquid catalyst.

scholarly journals Biodiesel Production from a Novel Nonedible Feedstock, Soursop (Annona muricata L.) Seed Oil

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2562 ◽  
Author(s):  
Chia-Hung Su ◽  
Hoang Nguyen ◽  
Uyen Pham ◽  
My Nguyen ◽  
Horng-Yi Juan
Keyword(s):  
Reaction Time ◽  
Seed Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Annona Muricata ◽  
Reaction Conditions ◽  
Biodiesel Feedstock ◽  
Acid Catalyzed ◽  
American Society ◽  
Optimal Reaction

This study investigated the optimal reaction conditions for biodiesel production from soursop (Annona muricata) seeds. A high oil yield of 29.6% (w/w) could be obtained from soursop seeds. Oil extracted from soursop seeds was then converted into biodiesel through two-step transesterification process. A highest biodiesel yield of 97.02% was achieved under optimal acid-catalyzed esterification conditions (temperature: 65 °C, 1% H2SO4, reaction time: 90 min, and a methanol:oil molar ratio: 10:1) and optimal alkali-catalyzed transesterification conditions (temperature: 65 °C, reaction time: 30 min, 0.6% NaOH, and a methanol:oil molar ratio: 8:1). The properties of soursop biodiesel were determined and most were found to meet the European standard EN 14214 and American Society for Testing and Materials standard D6751. This study suggests that soursop seed oil is a promising biodiesel feedstock and that soursop biodiesel is a viable alternative to petrodiesel.

scholarly journals Performance of novel dielectric barrier discharge reactor for biodiesel production from palm oil and ethanol

2018 ◽  
Vol 67 ◽  
pp. 02010 ◽  
Author(s):  
Sari Dafinah Ramadhani ◽  
Saphira Nurina Fakhri ◽  
Setijo Bismo
Keyword(s):  
Palm Oil ◽  
Performance Test ◽  
Plasma Reactor ◽  
Operating Conditions ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Synthesis Methods ◽  
Dbd Plasma ◽  
Spiral Coil ◽  
Biodiesel Synthesis

The disadvantages of conventional biodiesel synthesis trigger the birth of new biodiesel synthesis methods using the DBD plasma reactor. The conventional methods with homogeneous and heterogeneous catalysts have significant constraints that the formation of glycerol compounds in large enough quantities that require considerable energy. The aim of present experiment is to design DBD non-thermal plasma reactor coaxial pipe type and to do its performance test in converting biodiesel The feed stock used are palm oil, ethanol, and argon gas as plasma carrier. Such a chemical reactor, this plasma reactor is also influenced by reaction kinetics and hydrodynamic factors. From this research, it can be seen that the optimum feed and gas flowrate being operated is 1.64 and 41.67 mL/s. The plasma reactor is used in the form of a quartz glass tube surrounded by a SS-314 spiral coil as an outer electrode. The applied operating conditions are 1 : 1 molar ratio of methanol/oil, ambient temperature of 28 - 30 °C, and pressure 1 bar. From this performance test, it is found that this plasma reactor can be used to synthesize biodiesel from palm oil and methanol without catalyst, no formation of soap, and minimal byproducts.

scholarly journals Low-Cost Alternative Biodiesel Production Apparatus Based on Household Food Blender for Continuous Biodiesel Production for Small Communities

2021 ◽  
Author(s):  
Wijittra Wongjaikham ◽  
Doonyapong Wongsawaeng ◽  
Vareeporn Ratnitsai ◽  
Manita Kamjam ◽  
Kanokwan Ngaosuwan ◽  
...  
Keyword(s):  
Flow Rate ◽  
Palm Oil ◽  
Catalyst Concentration ◽  
Low Cost ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Homogeneous Catalyst ◽  
Reaction Volume ◽  
Small Communities ◽  
Production Apparatus

Abstract Fatty acid methyl esters (FAMEs) are sustainable biofuel that can alleviate high oil cost and environmental impacts of petroleum-based fuel. A modified 1,200 W high efficiency fruit blender was employed for continuous transesterification of various refined vegetable oils and waste cooking oil (WCO) using sodium hydroxide as a homogeneous catalyst. The following factors have been investigated on their effects on FAME yield: baffles, reaction volume, total reactant flow rate, methanol-oil molar ratio, catalyst concentration and reaction temperature. Results indicated that the optimal conditions were: 2,000 mL reaction volume, 50 mL/min total flow rate, 1% and 1.25% catalyst concentration for refined palm oil and WCO, respectively, 6:1 methanol-to-oil molar ratio and 62 - 63oC, obtaining yield efficiency over 96.5% FAME yield of 21.14 ´ 10-4 g.J-1 (for palm oil) and 19.39 ´ 10-4 g.J-1 (for WCO). All the properties of produced FAMEs meet the EN 14214 and ASTM D6751 standards. The modified household fruit blender could be a practical and low-cost alternative biodiesel production apparatus for continuous biodiesel production for small communities in remote areas.

scholarly journals Optimization of Waste Cooking Oil’s FFA as Biodiesel Feedstock

Teknomekanik ◽  
2021 ◽  
Vol 4 (1) ◽  
pp. 14-21
Author(s):  
Sri Rizki Putri Primandari ◽  
Andril Arafat ◽  
Harumi Veny
Keyword(s):  
Irradiation Time ◽  
Control Variable ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Cooking Oil ◽  
Biodiesel Feedstock ◽  
Temperature Irradiation ◽  
Acid Esterification ◽  
Central Composite

Waste cooking oil has high Free Fatty Acid (FFA). It affected on decreasing a biodiesel production. FFA reduction is one of important processes in biodiesel production from waste cooking oil. Thus, this study aimed to examine the optimum condition in FFA reduction. The process is assisted by using ultrasonic irradiation on acid esterification. Variables of the process are acid concentration, molar ratio of methanol and oil, and irradiation time. Meanwhile temperature irradiation on 45oC is a control variable. Process optimization is conducted by Response Surface Methodology (RSM) with Central Composite Design (CCD). The optimum conditions of response were 7.22:1 (methanol to oil molar ratio), 0.92% wt H2SO4, 26.04 minutes (irradiation time), and 45oC (irradiation temperature). Ultrasonic system reduced FFA significantly compared to conventional method.

scholarly journals Box-Behnken Design for Optimization on Biodiesel Production from Palm Oil and Methyl Acetate using Ultrasound Assisted Interesterification Method

2021 ◽  
Author(s):  
Mahfud Mahfud ◽  
Ansori Ansori
Keyword(s):  
Palm Oil ◽  
Energy Demand ◽  
Alternative Energy ◽  
Methyl Acetate ◽  
Catalyst Concentration ◽  
Separation Process ◽  
Operating Conditions ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Box Behnken Design

Energy demand is currently increasing in line with technological and economic developments, but not accompanied by an increase in energy reserves. So we need another alternative energy that can be renewed, namely biodiesel. Biodiesel has been produced commercially through the transesterification from vegetable oil with methanol using catalyst that produces esters and glycerol. The formation of glycerol which is by-product can reduce its economic value, so it needs to be done the separation process. Therefore, a new route is proposed in this study, namely the interesterification reaction (non-alcoholic route) using methyl acetate as an alkyl group supplier and potassium methoxide catalyst. The superiority of the product produced by the interesterification reaction is biodiesel with triacetin byproducts which have an economical value and can be added to biodiesel formulations because of their solubility so that no side product separation process is needed. To increase the yield of biodiesel and the interesterification rate, the ultrasound method was used in this study. To optimize the factors that affect the interesterification reaction (molar ratio of methyl acetate to oil, catalyst concentration, temperature, and interesterification time), the Box-Behnken design (BBD) is used. Optimal operating conditions to produce the yields of biodiesel of 98.64 % are at molar ratio of methyl acetate to palm oil of 18.74, catalyst concentration of 1.24 %, temperature of 57.84 °C, and interesterification time of 12.69 minutes.

scholarly journals Triethanolamine as an efficient cosolvent for biodiesel production by CaO-catalyzed sunflower oil ethanolysis: An optimization study

2019 ◽  
Vol 73 (6) ◽  
pp. 351-362 ◽  
Author(s):  
Dusica Djokic-Stojanovic ◽  
Zoran Todorovic ◽  
Dragan Troter ◽  
Olivera Stamenkovic ◽  
Ljiljana Veselinovic ◽  
...  
Keyword(s):  
Reaction Temperature ◽  
Sunflower Oil ◽  
Acid Ethyl Ester ◽  
Fatty Acid Ethyl Ester ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Calcium Leaching ◽  
Stirred Reactor ◽  
Optimization Study ◽  
Purification Stage

Triethanolamine was applied as an efficient ?green? cosolvent for biodiesel production by CaO-catalyzed ethanolysis of sunflower oil. The reaction was conducted in a batch stirred reactor and optimized with respect to the reaction temperature (61.6-78.4?C), the ethanol-to-oil molar ratio (7:1-17:1) and the cosolvent loading (3-36 % of the oil weight) by using a rotatable central composite design (RCCD) combined with the response surface methodology (RSM). The optimal reaction conditions were found to be: the ethanol-to-oil molar ratio of 9:1, the reaction temperature of 75?C and the cosolvent loading of 30 % to oil weight, which resulted in the predicted and actual fatty acid ethyl ester (FAEE) contents of 98.8 % and 97.9?1.3 %, respectively, achieved within only 20 min of the reaction. Also, high FAEE contents were obtained with expired sunflower oil, hempseed oil and waste lard. X-ray diffraction analysis (XRD) was used to understand the changes in the CaO phase. The CaO catalyst can be used without any treatment in two consecutive cycles. Due to the calcium leaching into the product, an additional purification stage must be included in the overall process.

scholarly journals Flow-mode biodiesel production from palm oil using a pressurized microwave reactor

2019 ◽  
Vol 8 (1) ◽  
pp. 8-14 ◽  
Author(s):  
Seyed Mohammad Safieddin Ardebili ◽  
Xinyu Ge ◽  
Giancarlo Cravotto
Keyword(s):  
Palm Oil ◽  
Irradiation Time ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Flow Mode ◽  
Reaction Conditions ◽  
Surface Method ◽  
Optimized Conditions ◽  
Reactor Pressure ◽  
Palm Oil Biodiesel

Abstract The factors that influence microwave-assisted biodiesel production reactions have been analyzed in this investigation. The studied parameters included microwave (MW) power, irradiation time, and reactor pressure. The response surface method was used to optimize the reaction conditions. The conversion for the 6:1 methanol/oil molar ratio and 1% catalyst ranged from 68.4% to 96.71%. The optimized conditions were found to be 138 s of MW irradiation at 780 W and 7 bar pressure. The conversion at this point was 97.82%. Biodiesel yield increased at higher radiation times (90–130 s) and pressures (5–7 bar). Results show that MW power and irradiation time have significant effects at the 1% level, whereas pressure had significant effects at the 5% level on biodiesel production in this range. The major properties of the palm oil biodiesel produced herein have met the requirements of the EN 14214 methyl ester standard.

Sign in / Sign up

Export Citation Format

Share Document