scholarly journals Modern kinetic spectrophotometric procedure for estimation of furosemide drug as bulk form and in pharmaceuticals preparations

2016 ◽  
Vol 29 (4) ◽  
pp. 184-189 ◽  
Author(s):  
Mohauman Mohammad Al-Rufaie
Keyword(s):  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Fixed Time ◽  
Aldehyde Group ◽  
Molar Absorptivity ◽  
Colored Complex ◽  
Spectrophotometric Procedure ◽  
Primary Amino ◽  
Kinetic Spectrophotometric ◽  
Good Agreement

Abstract A simple, rapid, sensitive, inexpensive and easy to perform kinetic spectrophotometric procedure for the investigation of trace quantities of the drug, furosemide (FRO), as bulk and in the pharmaceutical preparations, has been improved upon. The enhanced method was depended on the fashioning of the Schiff ‘s base by the reaction of the aldehyde group present in the 5-sulfo salicylaldehyde reagent, and the primary amino group present in furosemide. The latter acts as a ligand for the formation of an intense colored complex with Co(II) in an acidic medium, with maximum absorption at 608 nm. In the work, kinetic spectrophotometrics were established through the fixed time method. Moreover, Beer’s law was applied on the range of concentration between 5-100 ppm, while the molar absorptivity and the Sandell sensitivity were 3.9295×104 l.mol−1cm−1, 0.008 μg.cm−2, respectively. The detection limit (LOD) was 2.133 µg/ml−1, and LOQ was 1.105 µg/ml−1. Ideal circumstances for all colour improvement were seen, and the suggested procedure has been effectively employed in investigating amounts of furosemide (FRO) in bulk forms and in pharmaceutical preparations (tablets, injection sample). Additives and general excipient materials did not affect the studied method. A statistical comparison between the results that were obtained from the reference method gave good agreement.

scholarly journals Colorimetric Assay of Thiamine Hydrochloride in Pharmaceutical Preparations

2019 ◽  
Vol 16 (4) ◽  
pp. 0898
Author(s):  
Ahmad Et al.
Keyword(s):  
Colorimetric Assay ◽  
Pharmaceutical Preparations ◽  
Aldehyde Group ◽  
Molar Absorptivity ◽  
Thiamine Hydrochloride ◽  
Schiff’S Base ◽  
Colored Complex ◽  
Relative Standard ◽  
Primary Amino

            A simple, rapid, accurate and sensitive spectrophotometric method for the determination of thiaminehydrochloride has been developed. The method is based on the formation of the Schiff’s base between the primary amino group present in thiamine hydrochloride and aldehyde group present in the vanillin reagent to produce a yellow colored complex having maximum absorption at 390 nm. Beer’s law has obeaid over the concentration range of 2-28µg/mL, with molar absorptivity of 0.96x104L/mol.cm. The average recovery which is a measure of accuracy is 100±1.3% and the relative standard deviation (RSD) is less than1.5 .The present method is considered to be simple because it does not need heating, hydrolysis and solvent extraction steps. The ingredients often formulated with thiamine and have been shown not to interfere, and is suitable for the routine determination of thiamine hydrochloride. The proposed method has been successfully applied for the determination of thiamine hydrochloride in pure form and in pharmaceutical preparations.

scholarly journals  Determination of CLINDAMYCIN HCl in Capsules by New, Validated, Simple and Green Kinetic Spectrometric Method

2021 ◽  
Author(s):  
Shaza Affas ◽  
Amir Alhaj Sakur
Keyword(s):  
Initial Rate ◽  
Limit Of Detection ◽  
Reference Method ◽  
Fixed Time ◽  
Spectrometric Method ◽  
Iodide Ions ◽  
Kinetic Spectrophotometric ◽  
Optimized Conditions ◽  
Good Agreement

Abstract Background: simple, sensitive, free of organic solvents, kinetic spectrophotometric method has been developed for the determination of Clindamycin Hydrochloride, both in pure form and Capsules. Method used is based on reaction of Clindamycin with potassium iodide and potassium iodate in aqueous medium at (25 ±2 °c) to produce yellow colored tri iodide ions (I3-). the reaction is followed spectrophotometrically by measuring the absorbance at 350 nm wavelength during 40 minutes. Results: the effects of analytical parameters on reported kinetic methods were investigated. Under the optimized conditions, the initial rate and fixed time (at 10 min) methods were used for constructing the calibration graphs. The graphs were linear in concentration ranges 1-20 μg.ml-1 with limit of detection of 0.12 and 0.22 μg ml-1for the initial rate and fixed time methods, respectively. The results were satisfactory and the analytical performance for both methods was validated. Conclusion: The proposed methods have been applied to determine the components in capsules with an average recovery of 98.25% to 102.00% and the results are in good agreement with those found by the reference method.

scholarly journals Kinetic Spectrophotometric Determination of Ethamsylate in Dosage Forms

2007 ◽  
Vol 90 (3) ◽  
pp. 679-685 ◽  
Author(s):  
Nahed El-Enany ◽  
Fathalla Belal ◽  
Mohamed Rizk
Keyword(s):  
Room Temperature ◽  
Kinetic Method ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Quantitation Limit ◽  
Experimental Parameters ◽  
Kinetic Spectrophotometric ◽  
Good Agreement

Abstract A simple and sensitive kinetic method has been developed for the determination of ethamsylate (ESL) in its pharmaceutical preparations. The method is based upon oxidation of ESL with 3-methyl-2-benzothiazolinone hydrazone hydrochloride in presence of cerium(IV) ammonium sulfate at room temperature for 20 min. The absorbance of the reaction product is measured at 514 nm. The absorbance-concentration plot was rectilinear over the range of 430 g/mL (r = 0.9999). The lower detection limit was 0.267 g/mL (9.110 106 M) and the lower quantitation limit was 0.808 g/mL. The different experimental parameters affecting the development and stability of the reaction product were studied and optimized. The proposed method was applied to the determination of ESL in formulations, and the results obtained were in good agreement with those obtained using a reference method. The proposed method was also used for the in vitro detection of ESL in spiked human plasma at its therapeutic concentration level.

scholarly journals Validated green spectrophotometric kinetic method for determination of Clindamycin Hydrochloride in capsules

BMC Chemistry ◽  
2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Shaza Affas ◽  
Amir Alhaj Sakur
Keyword(s):  
Initial Rate ◽  
Limit Of Detection ◽  
Kinetic Method ◽  
Reference Method ◽  
Fixed Time ◽  
Iodide Ions ◽  
Kinetic Spectrophotometric ◽  
Optimized Conditions ◽  
Good Agreement

Abstract Background simple, sensitive, free of organic solvents, kinetic spectrophotometric method has been developed for the determination of Clindamycin Hydrochloride, both in pure form and Capsules. Method is based on reaction of Clindamycin with potassium iodide and potassium iodate in an aqueous medium at (25 ± 2 °C) to produce yellow-coloured tri iodide ions (I3−). The reaction is followed spectrophotometrically by measuring the absorbance at wavelength 350 nm during 40 min. Results the effects of analytical parameters on reported kinetic methods were investigated. Under the optimized conditions, the initial rate and fixed time (at 10 min) methods were used for constructing the calibration graphs. The graphs were linear in concentration ranges 1–20 μg ml−1 with limit of detection of 0.12 and 0.22 μg ml−1for the initial rate and fixed time methods, respectively. The results were satisfactory and the analytical performance for both methods was validated. Conclusion The proposed methods have been applied to determine the components in capsules with an average recovery of 98.25–102.00% and the results are in good agreement with those found by the reference method.

scholarly journals Spectrophotometric Determination of Zidovudine in Pharmaceuticals Based on Charge-Transfer Complexation Involving N-Bromosuccinimide, Metol and Sulphanilic Acid as Reagents

2007 ◽  
Vol 4 (2) ◽  
pp. 173-179 ◽  
Author(s):  
K. Basavaiah ◽  
U. R. Anil Kumar
Keyword(s):  
Limit Of Detection ◽  
Pharmaceutical Preparations ◽  
Reference Method ◽  
Standard Addition ◽  
Molar Absorptivity ◽  
Sulphanilic Acid ◽  
Bulk Drug ◽  
Student’S T ◽  
Charge Transfer Complexation

A simple spectrophotometric method is proposed for the determination of zidovudine(ZDV) in bulk drug and in pharmaceutical preparations. The method is based on the oxidation of ZDV by a known excess of oxidant N-bromosuccinimide (NBS), in buffer medium of pH 1.5, followed by the estimation of unreacted amount of oxidant with metol and sulphanilic acid. The reacted oxidant corresponds to the amount ZDV. The purple-red reaction product absorbs maximally at 530 nm and Beer’s law is obeyed over a range 5 to 75 μg mL-1. The apparent molar absorptivity is calculated to be 5.1×103L mol-1cm-1, and the corresponding Sandell sensitivity value is 0.052 μg cm-2. The limit of detection and quantification are found to be 0.90 and 2.72, respectively. Intra-day and inter-day precision and accuracy of the developed methods were evaluated as per the current ICH guidelines. The method was successfully applied to the assay of ZDV in tablet/capsule preparations and the results were statistically compared with those of the reference method by applying the Student’s t-test and F-test. No interference was observed from the common tablet/capsule excipients. The accuracy of the method was further ascertained by performing recovery studies via standard-addition method.

scholarly journals Nitroso-R-salt as a sensitive spectrophotometric reagent for the determination of paracetamol in pharmaceutical preparations

2009 ◽  
Vol 6 (3) ◽  
pp. 570-577
Author(s):  
Baghdad Science Journal
Keyword(s):  
Aqueous Solution ◽  
Statistical Difference ◽  
Pharmaceutical Preparations ◽  
Molar Absorptivity ◽  
Calibration Graph ◽  
Subsequent Reaction ◽  
Experimental Conditions ◽  
Colored Complex ◽  
British Pharmacopoeia

Nitroso-R-salt is proposed as a sensitive spectrophotometric reagent for the determination of paracetamol in aqueous solution. The method is based on the reaction of paracetamol with iron(III) and subsequent reaction with nitroso-R-salt to yield a green colored complex with maximum absorption at 720 nm. Optimization of the experimental conditions was described. The calibration graph was linear in the concentration range of 0.1 – 2.0 ?g mL-1 paracetamol with a molar absorptivity of 6.9 × 104 L mol-1 cm-1. The method was successfully applied to the determination of paracetamol in pharmaceutical preparations without any interference from common excipients. The method has been statistically evaluated with British Pharmacopoeia method and no statistical difference between methods was found at the 95% confidence level.

scholarly journals New Sensitive Kinetic Spectrophotometric Methods for Determination of Omeprazole in Dosage Forms

2009 ◽  
Vol 2009 ◽  
pp. 1-11 ◽  
Author(s):  
Ashraf M. Mahmoud
Keyword(s):  
Reference Method ◽  
Fixed Time ◽  
Dosage Forms ◽  
Charge Transfer Complexes ◽  
Specific Rate ◽  
Spectrophotometric Methods ◽  
H Nmr ◽  
Nmr Techniques ◽  
Kinetic Spectrophotometric

New rapid, sensitive, and accurate kinetic spectrophotometric methods were developed, for the first time, to determine omeprazole (OMZ) in its dosage forms. The methods were based on the formation of charge-transfer complexes with both iodine and 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ). The variables that affected the reactions were carefully studied and optimized. The formed complexes and the site of interaction were examined by UV/VIS, IR, and1H-NMR techniques, and computational molecular modeling. Under optimum conditions, the stoichiometry of the reactions between OMZ and the acceptors was found to be 1 : 1. The order of the reactions and the specific rate constants were determined. The thermodynamics of the complexes were computed and the mechanism of the reactions was postulated. The initial rate and fixed time methods were utilized for the determination of OMZ concentrations. The linear ranges for the proposed methods were 0.10–3.00 and 0.50–25.00   with the lowest LOD of 0.03 and 0.14   for iodine and DDQ, respectively. Analytical performance of the methods was statistically validated; RSD was <1.25% for the precision and <1.95% for the accuracy. The proposed methods were successfully applied to the analysis of OMZ in its dosage forms; the recovery was 98.91–100.32%  0.94–1.84, and was found to be comparable with that of reference method.

scholarly journals Kinetic Spectrophotometric Determination of Gemifloxacin Mesylate and Moxifloxacin Hydrochloride in Pharmaceutical Preparations Using 4-Chloro-7-nitrobenzo-2-oxa-1,3-diazole

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Mohammed G. Abdel Wahed ◽  
Ragaa El Sheikh ◽  
Ayman A. Gouda ◽  
Sayed Abou Taleb
Keyword(s):  
Limit Of Detection ◽  
Kinetic Method ◽  
Pharmaceutical Preparations ◽  
Fixed Time ◽  
Spectrophotometric Methods ◽  
Relative Standard ◽  
Significant Difference ◽  
Kinetic Spectrophotometric ◽  
Comparison Of The Results

Simple, sensitive, and accurate kinetic spectrophotometric method was proposed for the determination of gemifloxacin mesylate (GMF) and moxifloxacin hydrochloride (MOX) in pure forms and pharmaceutical preparations (tablets). The method is based on coupling the studied drugs with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole (NBD-Cl) in the presence of alkaline borate buffer. Spectrophotometric measurement was achieved by recording the absorbance at 466 and 464 nm for GMF and MOX, respectively, after a fixed time of 20 and 15 min on a water bath adjusted at 70 ± 5°C for both drugs. The different experimental parameters affecting the development and stability of the color were carefully studied and optimized. The absorbance-concentration plots were linear over the ranges 0.5–8.0 and 2.0–12 μg mL−1for GMF and MOX, respectively. The limit of detection of the kinetic method was about 0.12 (2.47 × 10−7 M) and 0.36 (8.22 × 10−7 M) μg mL−1for GMF and MOX, respectively. The proposed methods have been applied and validated successfully with percentage relative standard deviation (RSD% ≤ 0.52) as precision and percentage relative error (RE% ≤ 1.33) as accuracy. The robustness of the proposed method was examined with recovery values that were 97.5–100.5 ± 1.3–1.9%. Statistical comparison of the results with the reference spectrophotometric methods shows excellent agreement and indicates no significant difference in accuracy or precision.

scholarly journals Spectrophotometric Determination of Sulfamethoxazole Based on Charge-Transfer Complexation with Sodium Nitroprusside

2017 ◽  
Vol 30 (3) ◽  
pp. 102
Author(s):  
Tariq Y. Mahmoud ◽  
Sarmad B. Dikran ◽  
Alaa K. Mohammed
Keyword(s):  
Charge Transfer ◽  
Sodium Nitroprusside ◽  
Pharmaceutical Preparation ◽  
Molar Absorptivity ◽  
Amine Hydrochloride ◽  
Colored Complex ◽  
Central Composite Experimental Design ◽  
Charge Transfer Complexation ◽  
Good Agreement

   A simple, accurate and precise spectrophotometric method has been developed for the analysis of sulfamethoxazole (SMZ) in pure form and pharmaceutical preparation. The method involves a direct charge transfer complexation of sulfamethoxazole (SMZ) with sodium nitroprusside (SNP) in alkaline medium and the presence of hydroxyl amine hydrochloride. Variables affecting the formation of the formed orange colored complex were optimized following two approaches univariate and central composite experimental design (CCD) multivariate. Under optimum recommended conditions, the formed complex exhibits λmax at 512 nm and the method conforms Beer's law for SMZ concentration in the range of 5.0-150.0 (µg.mL-1) with molar absorptivity 1.139×103 L.mol-1.cm-1, and r = 0.9997. Analysis of SMZ pharmaceutical dosages shows a good agreement with the real amounts.

scholarly journals Kinetic Spectrophotometric Method for the Determination of Ranitidine and Nizatidine in Pharmaceuticals

2002 ◽  
Vol 85 (6) ◽  
pp. 1316-1323 ◽  
Author(s):  
Mohamed I Walash ◽  
Fathalla Belal ◽  
Fawzia Ibrahim ◽  
Mohamed Hefnawy ◽  
Manal Eid
Keyword(s):  
Spectrophotometric Method ◽  
Reaction Pathway ◽  
Kinetic Method ◽  
Fixed Time ◽  
Borate Buffer ◽  
The Other ◽  
Average Recovery ◽  
Kinetic Spectrophotometric ◽  
Good Agreement

Abstract An accurate and simple kinetic method is described for the determination of ranitidine and nizatidine in pure form and in pharmaceuticals. The method is based on the reaction of the compounds with 7-chloro-4-nitrobenz-2-oxa-1,3-diazole in pH 7.4 borate buffer at 60°C for a fixed time of 25 min for both compounds. The absorbance of the reaction product is measured at 495 nm for ranitidine and nizatidine. Calibration graphs were linear over the concentration range of 2–20 μg/mL, with limits of detection of 0.13 (3.7 × 10−7M) and 0.25 μg/mL (7.5 × 10−7M) for ranitidine and nizatidine, respectively. The proposed method was applied successfully to the determination of ranitidine in tablets and ampoules with average recoveries of 100.26 ± 0.69 and 100.29 ± 0.59%, respectively, and to the determination of nizatidine in capsules with an average recovery of 104.26 ± 0.44%. The results obtained are in good agreement with those obtained by the other methods used for comparison. A proposal of the reaction pathway is also presented.

Sign in / Sign up

Export Citation Format

Share Document