Preparation and characterization of poly(3-hydroxybutyrate)/ Cloisite25A nanocomposites

e-Polymers ◽  
2013 ◽  
Vol 13 (1) ◽  
Author(s):  
Matko Erceg ◽  
Dražan Jozić
Keyword(s):  
Crystallization Rate ◽  
Nucleating Agent ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Tg Analysis ◽  
Solution Intercalation ◽  
X Ray ◽  
Thermal Stability Of

Abstract Poly(3-hydroxybutyrate)/Cloisite25A (PHB/25A) nanocomposites were prepared by solution-intercalation method. The intercalation of PHB chains between the layers of Cloisite25A was observed by X-ray diffraction (XRD). Differential scanning calorimetry (DSC) and non-isothermal thermogravimetry (TG) analysis were performed to study the thermal properties, crystallization and the thermal degradation of the prepared nanocomposites. DSC analysis indicates that Cloisite25A acts as a nucleating agent and increases the crystallization rate of PHB, but due to intercalation reduces its overall degree of crystallinity. TG analysis shows that addition of Cloisite25A enhances the thermal stability of PHB.

scholarly journals Characterization of the Interface Between the Bulk Glass Forming Alloy Zr41Ti14Cu12Ni10Be23 with Pure Metals and Ceramics

2000 ◽  
Vol 15 (7) ◽  
pp. 1617-1621 ◽  
Author(s):  
Jan Schroers ◽  
Konrad Samwer ◽  
Frigyes Szuecs ◽  
William L. Johnson
Keyword(s):  
Sessile Drop ◽  
Bulk Glass ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Glass Forming ◽  
Processing Times ◽  
Thermal Stability Of

The reaction of the bulk glass forming alloy Zr41Ti14Cu12Ni10Be23 (Vit 1) with W, Ta, Mo, AlN, Al2O3, Si, graphite, and amorphous carbon was investigated. Vit 1 samples were melted and subsequently solidified after different processing times on discs of the different materials. Sessile drop examinations of the macroscopic wetting of Vit 1 on the discs as a function of temperature were carried out in situ with a digital optical camera. The reactions at the interfaces between the Vit 1 sample and the different disc materials were investigated with an electron microprobe. The structure and thermal stability of the processed Vit 1 samples were examined by x-ray diffraction and differential scanning calorimetry. The results are discussed in terms of possible applications for composite materials.

scholarly journals Synthesis and characterization of allyl- and vinyl-substituted 1,2-bis(tetrazolo)ethanes as polymeric precursors

2016 ◽  
Vol 71 (12) ◽  
pp. 1199-1209
Author(s):  
Vera A. Hartdegen ◽  
Maximilian S. Hofmayer ◽  
Konstantin Karaghiosoff ◽  
Thomas M. Klapötke
Keyword(s):  
Allyl Bromide ◽  
2D Nmr ◽  
Synthesis And Characterization ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
2D Nmr Spectroscopy ◽  
X Ray ◽  
Physical Stimuli ◽  
Thermal Stability Of

AbstractOn the basis of 1,2-bis(5-tetrazolo)ethane (BTE) the corresponding twofold vinyl and allyl N-substituted derivatives were synthesized using 1,2-dibromoethane and allyl bromide, respectively. The compounds were obtained as two different constitutional isomers. Both species were analyzed using NMR and IR spectroscopy, elemental analysis, as well as mass spectrometry. In the case of the diallyl bistetrazoles, the two isomers were characterized using 2D NMR spectroscopy. The synthesis of the divinyl compounds gave crystals of the 2,2′-N-substituted isomer, which were analyzed by single-crystal X-ray diffraction. The thermal stability of the compounds was determined using differential scanning calorimetry (DSC) and gave decomposition temperatures around 190°C and 230°C. For the investigation of the inherent energetic potential, sensitivities toward physical stimuli and detonation parameters were determined. The compounds turned out to be insensitive toward friction and impact and possess moderate energetic properties.

scholarly journals Effect of Composition on the Crystallization, Water Absorption, and Biodegradation of Poly(ε-caprolactam-co-ε-caprolactone) Copolymers

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2488
Author(s):  
Yuanyuan Dou ◽  
Xinyu Mu ◽  
Yuting Chen ◽  
Zhenbo Ning ◽  
Zhihua Gan ◽  
...  
Keyword(s):  
Water Absorption ◽  
Crystallization Rate ◽  
Nucleating Agent ◽  
Melting Behavior ◽  
Feed Ratio ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Molar Feed Ratio ◽  
Anionic Copolymerization

Poly(ester amide)s have aroused extensive research interest due to the combination of the degradability of polyester and the higher mechanical properties of polyamide. In this work, a series of poly(ε-caprolactam-co-ε-caprolactone) (P(CLA-co-CLO)) copolymers with different compositions were synthesized by anionic copolymerization. The structure, crystallization behavior, water absorption, and biodegradation behavior of these copolymers were investigated by means of nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), wide-angle X-ray diffraction (WAXD), and polarized optical micrographs (POM). The results indicated that the composition of P(CLA-co-CLO) copolymers can be adjusted by the molar feed ratio. The PCL blocks decreased the crystallization rate of PA6 blocks but had little effect on the melting behavior of PA6, while the crystallized PA6 acted as a heterogeneous nucleating agent and greatly improved the crystallization rate of PCL. Moreover, the introduction of PCL blocks greatly reduced the water absorption of P(CLA-co-CLO) copolymers and endow them a certain degree of degradability.

Role of gadolinium(III) complex in improving thermal stability of polythiophene composite

2015 ◽  
Vol 69 (10) ◽  
Author(s):  
Ferooze Ahmad Rafiqi ◽  
Kowsar Majid
Keyword(s):  
Thermal Stability ◽  
Thermal Analysis ◽  
Average Particle Size ◽  
Degree Of Crystallinity ◽  
Average Particle ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Thermal Stability Of

AbstractThis paper involves the preparation of polythiophene (PTP) and its composite by the oxidative polymerisation method by using ferric chloride as an oxidant and thiophene monomer. The gadolinium( III) complex obtained by the refluxing technique was used as dopant in the PTP matrix. On the basis of the spectroscopic characterisation, seven-coordinate geometry is proposed for the complex. Conductance measurement confirms the non-selectrolyte nature of complex. The PTP and its composite were subjected to FTIR, X-ray diffraction and scanning electron microscope techniques. The powder X-ray diffraction pattern showed the high crystalline nature of the complex which in turn developed a good degree of crystallinity in the PTP composite. The average particle size was calculated as 4.655 ˚A and 3.737 ˚A for the dopant and PTP composite, respectively, by using Debye Scherrer’s equation. Thermal analysis was performed by thermogravimetric (TG) analysis, differential thermal analysis (DTA) and differential scanning calorimetry (DSC) techniques. The TG, DTA and DSC results were well-correlated. The thermal analysis revealed the high thermal stability of the dopant which in turn improved the thermal stability of the PTP composite, revealing the potential of the composite for high temperature applications.

scholarly journals Synthesis and characterization of dextran ester derivatives and their adhesive properties

2019 ◽  
Vol 65 (1) ◽  
Author(s):  
Azusa Togo ◽  
Yukiko Enomoto ◽  
Akio Takemura ◽  
Tadahisa Iwata
Keyword(s):  
Breaking Strength ◽  
Value Added ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Adhesive Properties ◽  
X Ray ◽  
Practical Applications ◽  
Hot Melt ◽  
Thermal Stability Of

AbstractPolysaccharides are promising renewable alternatives to petroleum-based plastics, and are high-value-added materials in various industries. In this work, we synthesized dextran (α-1,6-glucan) ester derivatives substituting acyl groups with different carbon numbers from acetate to laurate. We found that the thermal stability of dextran was improved by esterification. Moreover, using differential scanning calorimetry and X-ray diffraction, we revealed that dextran ester derivatives were amorphous. Self-standing, transparent, solvent-cast films of dextran ester derivatives were prepared. Dextran ester derivatives adhered to various materials, including polyvinyl alcohol (PVA) films, wood, glass, and aluminum. In addition, the adhesive interfaces were transparent, which is important for practical applications. The adhesive strength for PVA films increased with concentration, exceeding the breaking strength of the PVA film at 0.3 g/mL. Moreover, dextran valerate and dextran hexanoate behaved as hot-melt-type adhesives. These results demonstrate the potential of dextran ester derivatives as biomass-based adhesives.

scholarly journals Surface Modification of Nanoclay for the Synthesis of Polycaprolactone (PCL) – Clay Nanocomposite

2018 ◽  
Vol 150 ◽  
pp. 02005 ◽  
Author(s):  
Kamal Yusoh ◽  
Shamini Vesaya Kumaran ◽  
Fadwa Sameeha Ismail
Keyword(s):  
Polymer Nanocomposite ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Solution Intercalation ◽  
X Ray ◽  
Degradation Temperature ◽  
Thermal Gravimetry ◽  
Modification Method ◽  
Oligomeric Silsesquioxane

This paper presents a new modification method to modify the surface of nanoclay (Na-MMT) to increase its d-spacing using Aminopropylisooctyl Polyhedral Oligomeric Silsesquioxane (AP-POSS) and the fabrication of Polycaprolactone (PCL) nanocomposite through solution intercalation technique. The structure and morphology of pure nanoclay, modified nanoclay (POSS-MMT) and the PCL nanocomposite were characterized by X-ray Diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) and Field Emission Scanning Electron Microscopy (FESEM). XRD revealed that the d-spacing of the POSS-MMT is increased by 0.64 nm as compared to pure nanoclay. FTIR and FESEM results also showed that AP-POSS were well dispersed and intercalated throughout the interlayer space of Na-MMT. An exfoliated structure was also observed for PCL/POSS-MMT nanocomposite. Thermal properties of the nanocomposite were investigated using Thermal Gravimetry Analysis (TGA) which recorded highest degradation temperature for PCL/POSS-MMT 1% nanocomposite which is 394.1°C at 50% weight loss (T50%) but a decrease in degradation temperature when POSS-MMT content is increased and Differential Scanning Calorimetry (DSC) analysis which showed highest melting and crystallization temperature for PCL/POSS-MMT 5% nanocomposite which is 56.6°C and 32.7°C respectively whereas a decrease in degree of crystallinity for PCL/POSS-MMT nanocomposite as compared to PCL/Na-MMT nanocomposite. This study affords an efficient modification method to obtain organoclay with larger interlayer d-spacing to enhance the properties of polymer nanocomposite.

Studies on the Preparation, Characterization and Solubility of -Cyclodextrin-Roxythromycin Inclusion Complexes

2009 ◽  
Vol 2 (2) ◽  
pp. 523-530
Author(s):  
D. Nagasamy Venkatesh ◽  
S. Karthick ◽  
M. Umesh ◽  
G. Vivek ◽  
R.M. Valliappan ◽  
...  
Keyword(s):  
Dissolution Rate ◽  
Inclusion Complexes ◽  
Phase Solubility ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Ir Studies ◽  
Poorly Soluble ◽  
Poorly Soluble Drug

Roxythromycin/ β-cyclodextrin (Roxy/ β-CD) dispersions were prepared with a view to study the influence of β-CD on the solubility and dissolution rate of this poorly soluble drug. Phase-solubility profile indicated that the solubility of roxythromycin was significantly increased in the presence of β-cyclodextrin and was classified as AL-type, indicating the 1:1 stoichiometric inclusion complexes. Physical characterization of the prepared systems was carried out by differential scanning calorimetry (DSC), X-ray diffraction studies (XRD) and IR studies. Solid state characterization of the drug β-CD binary system using XRD, FTIR and DSC revealed distinct loss of drug crystallinity in the formulation, ostensibly accounting for enhancement of dissolution rate.

scholarly journals Preparation and Characterization of Spherical Submicron CL-20 by Siphon Spray Refinement

2020 ◽  
Vol 2020 ◽  
pp. 1-9 ◽  
Author(s):  
Jiangtao Xing ◽  
Weili Wang ◽  
Wenzheng Xu ◽  
Tianle Yao ◽  
Jun Dong ◽  
...  
Keyword(s):  
Impact Sensitivity ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Crystal Forms ◽  
Refined Method ◽  
Diffraction Angle ◽  
Ultrasonic Assisted ◽  
The Impact ◽  
Thermal Stability Of

In order to improve the safety of hexanitrohexaazaisowurtzitane (CL-20), submicron CL-20 particles were prepared by a siphon ultrasonic-assisted spray refining experimental device. The samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and differential scanning calorimetry (DSC), and the impact sensitivity of the samples was tested. The results show that the particle size of siphon-refined CL-20 is about 800 nm~1 μm, which is more smooth, mellow, and dense than that of CL-20 prepared by a traditional pressure-refined method. The peak diffraction angle of pressure- and siphon-refined CL-20 is basically the same as that of raw CL-20, and their crystal forms are ε type. The peak strength of pressure- and siphon-refined CL-20 decreased obviously. The apparent activation energy of pressure-refined CL-20 and siphon-refined CL-20 is 13.3 kJ/mol and 11.95 kJ/mol higher than that of raw CL-20, respectively. The thermal stability of CL-20 is improved. The activation enthalpy (ΔH#) is significantly higher than that of raw CL-20, and the characteristic drop is 70.4% and 82.7% higher than that of raw CL-20. The impact sensitivity of siphon-refined CL-20 is lower than that of pressure-refined CL-20, so the safety performance of an explosive is improved obviously.

Characterization of New Nonstoichiometric Ferroelectric (Li0.95Cu0.15)Ta0.76Nb0.19O3 and Comparative Study With (Li0.95Cu0.15)Ta0.57Nb0.38O3 as Photocatalysts in Microbial Fuel Cells

2018 ◽  
Vol 16 (2) ◽  
Author(s):  
S. Louki ◽  
N. Touach ◽  
A. Benzaouak ◽  
V. M. Ortiz-Martínez ◽  
M. J. Salar-García ◽  
...  
Keyword(s):  
Power Density ◽  
Microbial Fuel Cells ◽  
Removal Rate ◽  
Oxygen Demand ◽  
Ferroelectric Material ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Uv Visible

This work investigates the photocatalytic activity of new ferroelectric material with formula (Li0.95Cu0.15)Ta0.76Nb0.19O3 (LT76) in a single chamber microbial fuel cell (MFC) and compares its performance with the similar photocatalyst (Li0.95Cu0.15)Ta0.57Nb0.38O3 (LT57). The photocatalysts LT76 and LT57 were synthesized by ceramic route under the same conditions, with the same starting materials. The ratio Ta/Nb was fixed at 4.0 and 1.5 for LT76 and LT57, respectively. These phases were characterized by different techniques including X-ray diffraction (XRD), transmission electronic microscopy (TEM), particle size distribution (PSD), differential scanning calorimetry (DSC), and ultraviolet (UV)–visible (Vis). The new photocatalyst LT76 presents specific surface area of 0.791 m2/g and Curie temperature of 1197 °C. The photocatalytic efficiency of this material is assessed in terms of wastewater treatment and electricity generation by power density and removal rate of chemical oxygen demand (COD) in the presence of a light source. The values of maximum power density and COD removal were 19.77 mW/m3 and 93%, respectively, for LT76.

scholarly journals Stacking Control by Molecular Symmetry of Sterically Protected Phthalocyanines

Molecules ◽  
2020 ◽  
Vol 25 (23) ◽  
pp. 5552
Author(s):  
Ryota Kudo ◽  
Masahiro Sonobe ◽  
Yoshiaki Chino ◽  
Yu Kitazawa ◽  
Mutsumi Kimura
Keyword(s):  
Lamellar Structure ◽  
Synthesis And Characterization ◽  
Molecular Symmetry ◽  
X Ray Diffraction ◽  
Melting Points ◽  
Scanning Calorimetry ◽  
Structural Isomers ◽  
X Ray ◽  
Temperature Controlled

The synthesis and characterization of two phthalocyanine (Pc) structural isomers, 1 and 2, in which four 2,6-di(hexyloxy)phenyl units were attached directly to the 1,8,15,22- or 1,4,15,18-positions of the Pc rings, are described. Both Pcs 1 and 2 exhibited low melting points, i.e., 120 and 130 °C respectively, due to the reduction in intermolecular π-π interaction among the Pc rings caused by the steric hindrance of 2,6-dihexyloxybenzene units. The thermal behaviors were investigated with temperature-controlled polarizing optical microscopy, differential scanning calorimetry, powder X-ray diffraction, and absorption spectral analyses. Pc 1, having C4h molecular symmetry, organized into a lamellar structure containing lateral assemblies of Pc rings. In contrast, the other Pc 2 revealed the formation of metastable crystalline phases, including disordered stacks of Pcs due to rapid cooling from a melted liquid.

Sign in / Sign up

Export Citation Format

Share Document