Low SAR Microstrip Patch Antenna for Mobile Phone

Frequenz ◽  
2015 ◽  
Vol 69 (9-10) ◽  
Author(s):  
M. I. Hossain ◽  
M. R. I. Faruque ◽  
M. T. Islam
Keyword(s):  
Patch Antenna ◽  
Cell Phone ◽  
Specific Absorption Rate ◽  
Ground Plane ◽  
Human Head ◽  
Dielectric Substrate ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Reflection Coefficients ◽  
Microstrip Patch

AbstractThe aim of this article is to design a new microstrip-fed patch antenna for cell phone applications. The antenna design is composed of slots and FR-4 dielectric substrate fed by a partial ground plane and a microstrip line. The user’s effects on antenna performances are also analyzed using standard SAM phantom. The specific absorption rate (SAR) values of proposed antenna are evaluated for different frequency bands considering cheek position of talk mode. The proposed antenna has an impedance bandwidth (–10 dB reflection coefficients) 100 MHz (0.87–0.97 GHz, lower band), 50 MHz (1.47–1.52 GHz, middle band), and 150 MHz (1.78–1.93 GHz, upper band), which can cover GSM 900 MHz, GPS 1,500 MHz, DCS 1,800 MHz, PCS 1,900 MHz, and GSM 1,900 MHz bands. Moreover, the proposed antenna produces lower SAR values in the human head than that of a dipole and helical antenna.

Circularly Polarized Rectangular Microstrip Patch Antenna with Finite Ground Plane

2015 ◽  
Vol 4 (2) ◽  
pp. 74
Author(s):  
Sanyog Rawat ◽  
Kamlesh Kumar Sharma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Axial Ratio ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Microstrip Patch ◽  
Rectangular Patch

<p class="Abstract"><span style="font-weight: normal;">In this paper a new geometry of patch antenna is proposed with improved bandwidth and circular polarization. The radiation performance of circularly polarized rectangular patch antenna is investigated by applying IE3D simulation software and its performance is compared with that of conventional rectangular patch antenna.</span> <span style="font-weight: normal;">Finite Ground truncation technique is used to obtain the desired results. The simulated return loss, axial ratio and smith chart with frequency for the proposed antenna is reported in this paper. It is shown that by selecting suitable ground-plane dimensions, air gap and location of the slits, the impedance bandwidth can be enhanced upto 10.15 % as compared to conventional rectangular patch (4.24%) with an axial ratio bandwidth of 4.05%.</span></p><p> </p><p> </p>

scholarly journals Analysis and design of a 3.5-GHz patch antenna for WiMAX applications

2014 ◽  
Vol 8 (1) ◽  
pp. 63-70 ◽  
Author(s):  
Funda Cirik ◽  
Bahadir Süleyman Yildirim
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Three Dimensional ◽  
High Gain ◽  
Antenna Design ◽  
Patch Type ◽  
Plane Antenna ◽  
Analysis And Design ◽  
Microstrip Patch ◽  
Electromagnetic Simulations

A high-gain microstrip patch-type WiMAX antenna operating at 3.5 GHz has been designed with a parasitic radiator and a raised ground plane. Antenna design has been carried out through extensive three-dimensional electromagnetic simulations. The patch antenna itself provides a realized gain of about 3.6 dB at 3.5 GHz. When a parasitic radiator is placed on top of the patch antenna, the gain increases from about 3.6 dB to about 7.4 dB. The raised ground plane further enhances the gain by about 1.5 dB. Hence the overall gain improvement is about 5.3 dB without the need of a radio-frequency amplifier.

scholarly journals EBG Based Microstrip Patch Antenna for Brain Tumor Detection via Scattering Parameters in Microwave Imaging System

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Reefat Inum ◽  
Md. Masud Rana ◽  
Kamrun Nahar Shushama ◽  
Md. Anwarul Quader
Keyword(s):  
Human Brain ◽  
Patch Antenna ◽  
Imaging System ◽  
Ground Plane ◽  
Human Head ◽  
Microstrip Patch Antenna ◽  
Microwave Imaging ◽  
Head Model ◽  
Imaging Algorithm ◽  
Microstrip Patch

A microwave brain imaging system model is envisaged to detect and visualize tumor inside the human brain. A compact and efficient microstrip patch antenna is used in the imaging technique to transmit equivalent signal and receive backscattering signal from the stratified human head model. Electromagnetic band gap (EBG) structure is incorporated on the antenna ground plane to enhance the performance. Rectangular and circular EBG structures are proposed to investigate the antenna performance. Incorporation of circular EBG on the antenna ground plane provides an improvement of 22.77% in return loss, 5.84% in impedance bandwidth, and 16.53% in antenna gain with respect to the patch antenna with rectangular EBG. The simulation results obtained from CST are compared to those obtained from HFSS to validate the design. Specific absorption rate (SAR) of the modeled head tissue for the proposed antenna is determined. Different SAR values are compared with the established standard SAR limit to provide a safety regulation of the imaging system. A monostatic radar-based confocal microwave imaging algorithm is applied to generate the image of tumor inside a six-layer human head phantom model. S-parameter signals obtained from circular EBG loaded patch antenna in different scanning modes are utilized in the imaging algorithm to effectively produce a high-resolution image which reliably indicates the presence of tumor inside human brain.

A Novel-Shaped Reduced Size FSS-Based Broadband High Gain Microstrip Patch Antenna for WiMAX/WLAN/ISM/X-Band Applications

2021 ◽  
pp. 2150290
Author(s):  
Kalyan Mondal
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Ground Plane ◽  
High Gain ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Antenna Structure ◽  
Microstrip Patch ◽  
Antenna Performance ◽  
Peak Gain

In this work, a broadband high gain frequency selective surface (FSS)-based microstrip patch antenna is proposed. The dimensions of the microstrip antenna and proposed FSS are [Formula: see text] and [Formula: see text]. A broadband high gain reference antenna has been selected to improve antenna performance. The reference antenna offers 1.2[Formula: see text]GHz bandwidth with 6.03[Formula: see text]dBi peak gain. Some modifications have been done on the patch and ground plane to enhance the bandwidth and gain. The impedance bandwidth of 7.70[Formula: see text]GHz (3.42–11.12[Formula: see text]GHz) with 4.9 dBi peak gain is achieved by the microstrip antenna without FSS. The antenna performance is improved by using FSS beneath the antenna structure. The maximum impedance bandwidth of 7.70[Formula: see text]GHz (3.32–11.02[Formula: see text]GHz) and peak gain of 8.6[Formula: see text]dBi are achieved by the proposed antenna with FSS. Maximum co- and cross-polarization differences are 21[Formula: see text]dB. The simulation and measurement have been done using Ansoft Designer software and vector network analyzer. The measured results are in good parity with the simulated one.

Bandwidth enhancement of a planar monopole microstrip patch antenna

2014 ◽  
Vol 8 (2) ◽  
pp. 237-242 ◽  
Author(s):  
Sudeep Baudha ◽  
Dinesh Kumar Vishwakarma
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Communication Services ◽  
Bandwidth Enhancement ◽  
Microstrip Patch ◽  
Peak Gain ◽  
Good Agreement

This paper presents a simple broadband planar monopole microstrip patch antenna with curved slot and partial ground plane. The proposed antenna is designed and fabricated on commercially available FR4 material with εr = 4.3 and 0.025 loss tangent. Bandwidth enhancement has been achieved by introducing a curved slot in the patch and optimizing the gap between the patch and the partial ground plane and the gap between the curved slot and the edge of the patch. Simulated peak gain of the proposed antenna is 4.8 dB. The impedance bandwidth (defined by 10 dB return loss) of the proposed antenna is 109% (2–6.8 GHz), which shows bandwidth enhancement of 26% as compared with simple monopole antenna. The antenna is useful for 2.4/5.2/5.8-GHz WLAN bands, 2.5/3.5/5.5-GHz WiMAX bands, and other wireless communication services. Measured results show good agreement with the simulated results. The proposed antenna details are described and measured/simulated results are elaborated.

scholarly journals Design of Transparent Antenna for 5G Wireless Applications

Proceedings ◽  
2020 ◽  
Vol 63 (1) ◽  
pp. 54
Author(s):  
Sanae Azizi ◽  
Laurent Canale ◽  
Saida Ahyoud ◽  
Georges Zissis ◽  
Adel Asselman
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Antenna Design ◽  
Impedance Bandwidth ◽  
Light Weight ◽  
Frequency Bandwidth ◽  
Frequency Range ◽  
Wireless Applications ◽  
Compact Size

This paper presents the design of a compact size band patch antenna for 5G wireless communications. This wideband antenna was designed on a glass substrate (12 × 11 × 2 mm3) and is optically transparent and compact. It consists of a radiation patch and a ground plane using AgHT-8 material. The antenna design comprises rectangular shaped branches optimized to attain the wideband characteristics. The calculated impedance bandwidth is 7.7% covering the frequency range of 25 to 27 GHz. A prototype of the antenna and various parameters such as return loss plot, gain plot, radiation pattern plot, and voltage standing wave ratio (VSWR) are presented and discussed. The simulated results of this antenna show that it is well suited for future 5G applications because of its transparency, flexibility, light weight, and wide achievable frequency bandwidth near the millimeter wave frequency band.

scholarly journals A Circular Coplanar Waveguide Fed Microstrip Patch Antenna with Modified Triangular Ground for UWB Applications

2019 ◽  
Vol 8 (9S) ◽  
pp. 170-174
Keyword(s):  
Patch Antenna ◽  
Coplanar Waveguide ◽  
Ground Plane ◽  
Stop Band ◽  
Microstrip Patch Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Antenna Structure ◽  
Microstrip Patch ◽  
Antenna Performance

This research article gives a detailed insight of the design, simulation of a compact circular shaped microstrip patch antenna that is fed using a coplanar waveguide feed (CPW for practical wireless communication applications). The antenna is typically designed for Ultra wideband (1.46-6GHz), Bluetooth (2.4GHz), ZIGBEE (2.4GHz), WLAN (5.15- 5.35 GHz and 5.725- 5.825), Wi-Fi (2.4-2.485GHz) and HIPERLAN-2(5.15 - 5.35 GHz and 5.470 -5.725GHz) wireless applications with stop band characteristics for the H (partial C band). The proposed antenna has an overall packaged structure dimensions of 78 x75 x1.605 mm3 and is fabricated on FR4 substrate as a circular patch antenna with a coplanar ground .The commercially available laminate FR4 substrate that is used has a dielectric constant of 4.4, height of 1.6mm and a loss tangent of 0.0024.The prospective antenna shows a simulated impedance bandwidth of 4.54 GHz. The coplanar waveguide feeding used with this antenna helps in improving antenna performance in terms of its impedance bandwidth as this geometry helps in creating multiple current loops at the antenna structure, thereby exciting nearby frequencies that merge to show a broadband of operation. The antenna’s operational bandwidth is also improved by the concept of modified ground, in which triangular and rectangular shapes are added symmetrically on both sides of ground plane that provide a better fringing effect and hence an improved bandwidth.

scholarly journals Bandwidth and Efficiency Enhancement of Rectangular Patch Antenna for SHF Applications

2019 ◽  
Vol 9 (6) ◽  
pp. 4962-4967
Author(s):  
M. M. Nahas ◽  
M. Nahas
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Low Cost ◽  
Ground Plane ◽  
Cost Effective ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Antenna Performance

The microstrip patch antenna is used in various communication applications including cellular phones, satellites, missiles, and radars, due to its several attractive features such as small size and weight, low cost, and easy fabrication. The microstrip patch antenna consists of a top radiating patch, a bottom ground plane, and a dielectric substrate in between. The patch can have different shapes, the rectangular patch being the most commonly used. In practice, the microstrip antenna suffers from narrow bandwidth and low gain efficiency. This paper aims to enhance the bandwidth and efficiency of a rectangular-patch antenna using the High-Frequency Structure Simulator (HFSS). Initially different patch sizes and substrate materials are investigated and optimal antenna parameters are achieved. Then, the antenna performance is further enhanced by inserting single and double slot designs into the patch. Two cost-effective feeding methods are involved in the investigation. The antenna is designed to operate in the Super High Frequency (SHF) band.

scholarly journals Design and Analysis of Circular Monopole antenna for WLAN and WI-Max Application in S band

2020 ◽  
Vol 9 (9) ◽  
pp. 653-657
Keyword(s):  
Computer Simulation ◽  
Dielectric Constant ◽  
Patch Antenna ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Antenna Design ◽  
Broadband Antennas ◽  
Microstrip Patch ◽  
Research Article ◽  
Ground System

In today’s existence, the technology for communication is continuously growing. The agile achievement in ultra-broadband antennas in wireless communication is increased. A circular monopole microstrip patch antenna has been developed in this research paper. The parameters grandiose by antenna perfmonance are researched. The design is designed to achieve desired gain and bandwidth at 2.4 GHz frequency, with a defected ground system (DGS). This antenna design has been effectuated using FR-4 as the dielectric substrate with 4.3 as dielectric constant. In computer simulation technology (CST) the model monopole circular microstrip patch antenna is simulated and the results needed are achieved. The S11 parameter is obtained as -17.28 decibels which is below -10 decibel. The gain obtained at 2.4 GHz frequency is 1.730 decibel. Application in S band devices, including Wi-Max, WLAN, radio altimeter, cordless phones, wireless headphones etc., were built in this research article.

scholarly journals Electrically Coupled Folded Arm Resonators with the Feedline Patch Antenna for Spurious Harmonic Suppression and Bandwidth Improvement

2020 ◽  
Vol 16 (2) ◽  
pp. 1-6
Author(s):  
Mohammed Alkhafaji
Keyword(s):  
Patch Antenna ◽  
Ground Plane ◽  
Basic Structure ◽  
Open Loop ◽  
Antenna Design ◽  
Center Frequency ◽  
Harmonic Suppression ◽  
Good Design ◽  
Microstrip Patch ◽  
3D Computer Simulation

This paper presents a new design of the filtering antenna with a quasi-elliptic function response. The basic structure of the proposed filtering antenna is consists of a four-folded arms open-loop resonator (OLR). The proposed filtering antenna is simulated, improved and, analyzed by using 3D Computer Simulation Technology (CST) electromagnetic simulator software. The design has good spurious harmonic suppression in the upper and lower stopbands. The Insertion Loss of the proposed filtering antenna IL=0.2 dB and the Return Loss RL= -25.788 dB at the center frequency fo=5.75 GHz. The passband bandwidth which is relatively wide, and equal to 0.793 GHz. The microstrip filtering antenna circuit shows good design results compared to the conventional microstrip patch antenna. The filtering antenna design circuit with etched ground plane structure also has good design results compared to the filtering antenna design which has a complete ground plane structure.

Sign in / Sign up

Export Citation Format

Share Document