A Dual Polarized Ultra-Wideband Slot Antenna Using Stepped Microstrip Feed Structure

Frequenz ◽  
2015 ◽  
Vol 69 (11-12) ◽  
Author(s):  
R. V. S. Ram Krishna ◽  
Raj Kumar
Keyword(s):  
Impedance Matching ◽  
Correlation Coefficients ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Dual Polarization ◽  
Printed Circuit ◽  
Peak Gain ◽  
Microstrip Feed

AbstractIn this paper, a printed slot antenna for ultra-wideband dual polarization is proposed and experimentally demonstrated. The slot is L-shape and its two arms are individually microstrip fed for producing the orthogonal polarizations. The slot arms and the microstrip feed lines are step sectioned for wideband impedance matching. For isolation purpose, a slant narrow metallic stub is inserted at the junction of the slot arms. The antenna has an impedance bandwidth of 118% (3.1–12 GHz) and isolation of around 20 dB over most of the band. The radiation patterns are nearly omnidirectional with a peak gain varying from 3 to 6 dBi. For assessing the diversity performance of the antenna, the envelope correlation coefficients are computed from the simulated and measured S-parameters and found to be within acceptable limits. With a compact, single substrate design, the antenna is expected to be useful for printed circuit ultra wideband applications requiring dual polarization features.

scholarly journals Reconfigurable 2×1 CPW-Fed Rectangular Slot Antenna Array (RSAA) Based on Graphene for Wireless Communications

2021 ◽  
Vol 36 (6) ◽  
pp. 788-795
Author(s):  
Dalia Elsheakh ◽  
Osama Dardeer
Keyword(s):  
Wireless Communications ◽  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Average Gain ◽  
Rectangular Slot ◽  
High Data ◽  
Peak Gain

This article presents a 2×1 CPW ultra wideband rectangular slot antenna array (UWB-RSAA) with a modified circular slot shape to support a high data rate for wireless communications applications. The proposed antenna array dimensions are 0.7λ×0.8λo×0.064λo at the resonant frequency 1.8 GHz. It is fabricated on Rogers RO4003 substrate and fed by using a coplanar waveguide (CPW). A graphene layer is added on one side of the substrate to realize frequency reconfigurability and improve the array gain. The proposed array acquires -10 dB impedance bandwidth of the RSAA that extends from 1.7 GHz to 2.6 GHz, from 3.2 to 3.8 GHz, and from 5.2 GHz to 7 GHz. The proposed array achieved a realized peak gain of 7.5 dBi at 6.5 GHz at 0 Volt bias with an average gain of 4.5 dBi over the operating band. When the graphene bias is increased to 20 Volt, the antenna bandwidth extends from 1 GHz to 4 GHz and from 5 to 7 GHz with a peak gain of 14 dBi at 3.5 GHz and an average gain of 7.5 dBi. The linearly polarized operation of the proposed array over the operating bands makes it suitable for short-range wireless communications .

scholarly journals Reconfigured and Notched Tapered Slot UWB Antenna for Cognitive Radio Applications

2012 ◽  
Vol 2012 ◽  
pp. 1-8 ◽  
Author(s):  
Tamer Aboufoul ◽  
Akram Alomainy ◽  
Clive Parini
Keyword(s):  
Cognitive Radio ◽  
Impedance Matching ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Total Efficiency ◽  
Back Side ◽  
Radiation Patterns ◽  
Uwb Antenna ◽  
Design Concepts ◽  
Specific Frequency

A compact reconfigurable and notched ultra-wideband (UWB) tapered slot antenna (TSA) is presented. The antenna reconfiguration operation principle relies on 2 mechanisms: in the first mechanism a resonator parasitic microstrip line electrically coupled to the TSA is used to notch the TSA at a specific frequency and the second mechanism relies on changing the input impedance matching of the antenna by means of changing the length of a stub line extended from an additional tiny partial ground on the back side of the antenna. The reflection coefficient, radiation patterns, and gain simulations and measurements for the proposed antenna are presented to verify the design concepts featuring a very satisfactory performance. Total efficiency simulations and measurements are also presented to highlight the filtering performance of the reconfigured antenna. When the antenna was reconfigured from the UWB to work into multiple frequency bands, the radiation patterns were still the same and the total peak gain has slightly improved compared to the UWB case. In addition, when the antenna operated in the notched mode, the gain has significantly dropped at the notch frequency. The simplicity and flexibility of the proposed multimode antenna make it a good candidate for future cognitive radio front ends.

scholarly journals Design of Ultra Wideband Antenna

2020 ◽  
Vol 8 (5) ◽  
pp. 3988-3990
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Rectangular Patch ◽  
Microstrip Feed

In this paper, A coplanar waveguide (CPW) ultra-wideband(UWB) antenna is designed, analyzed and simulated by computer simulation technology(CST). The proposed antenna is fabricated on FR-4 dielectric substrate. A microstrip feed line is used to excite the antenna.The ground plane is slotted to improve the impedance bandwidth (BW). Here, a rectangular patch is used as radiator and two corners out of four are truncated to improve impedance matching and UWB characterization.This antenna satisfies UWB characteristics like VSWR<2, Return loss(S11)<-10 dB,Gain<5dB and the antenna is operating within the frequency range of 1.59 to 11.87 GHz range which covers whole ultra wideband i.e. 3.1 to 10.6 GHz range.

A CPW-fed stepped slot UWB antenna for MIMO/diversity applications

2015 ◽  
Vol 9 (1) ◽  
pp. 151-162 ◽  
Author(s):  
Raj Kumar ◽  
Neha Pazare
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Slot Antennas ◽  
Capacity Loss ◽  
Field Radiation

An ultra-wideband (UWB) slot antenna for diversity applications is introduced. The overall structure of the antenna consists of two similar coplanar waveguide (CPW)-fed stepped rectangular slots placed in an orthogonal position. The slots are asymmetric with respect to their placement in the ground plane. The CPW feeds are double stepped and terminated on hexagonal patches for better impedance matching. A wide impedance bandwidth (measured) from 3 to 12 GHz with an isolation better than 15 dB is obtained with this antenna. To improve the isolation, the design is modified and an I-shaped slot strip is introduced between the two slot antennas. With this, the isolation is brought about 25 dB of most of the band, while the impedance bandwidth remains the same (2.8–12 GHz for port 1, measured and 2.9–12 GHz for port 2, measured). The far-field radiation patterns are also measured and a peak gain of about 5 dBi is obtained. Finally, the diversity parameters such as envelope correlation coefficient and capacity loss are calculated and found to have low values. The antenna is expected to be useful for UWB diversity applications with good isolation.

scholarly journals Miniaturized Antipodal Vivaldi Antenna with Improved Bandwidth Using Exponential Strip Arms

Electronics ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 83
Author(s):  
Mohammad Mahdi Honari ◽  
Mohammad Saeid Ghaffarian ◽  
Rashid Mirzavand
Keyword(s):  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Lower Edge ◽  
Radiation Characteristics ◽  
Antenna Structure ◽  
Antenna Miniaturization ◽  
Vivaldi Antenna ◽  
Vivaldi Antennas ◽  
Peak Gain

In this paper, a miniaturized ultra-wideband antipodal tapered slot antenna with exponential strip arms is presented. Two exponential arms with designed equations are optimized to reduce the lower edge cut-off frequency of the impedance bandwidth from 1480 MHz to 720 MHz, resulting in antenna miniaturization by 51%. This approach also improves antenna bandwidth without compromising the radiation characteristics. The dimension of the proposed antenna structure including the feeding line and transition is 158 × 125 × 1 mm3. The results show that a peak gain more than 1 dBi is achieved all over the impedance bandwidth (0.72–17 GHz), which is an improvement to what have been reported for antipodal tapered slot and Vivaldi antennas with similar size.

Compact stepped slot antenna for ultra-wideband applications

2021 ◽  
pp. 1-7
Author(s):  
B. Hammache ◽  
A. Messai ◽  
I. Messaoudene ◽  
T. A. Denidni
Keyword(s):  
Radiation Pattern ◽  
Impedance Matching ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Back Side ◽  
Compact Size ◽  
Measurement Results ◽  
Operating Bandwidth ◽  
Uwb Applications

Abstract In this paper, a compact stepped slot antenna for ultra-wideband (UWB) applications is proposed. A very small size and UWB bandwidth operation are achieved by integrating a stepped slot in the back side of the antenna. This stepped slot is excited by using a 50 Ω-feed line in the top side of the antenna. The antenna is characterized by an impedance bandwidth between 3.05 GHz and more than 12 GHz. The dimensions of the antenna are 17 mm × 8 mm × 1.27 mm, which leads to the most compact size compared with other works in the literature. The integrated stepped slot is divided into additional elementary slots, where each elementary slot has a matching point. Adding these elementary slots allows to increase further the operating bandwidth. The radiation pattern of the compact stepped slot antenna is omnidirectional in the H-plane and bidirectional in the E-plane. The measurement results agree well with the simulated ones in terms of impedance matching and radiation pattern.

scholarly journals A Reconfigurable Triple-Notch-Band Antenna Integrated with Defected Microstrip Structure Band-Stop Filter for Ultra-Wideband Cognitive Radio Applications

2013 ◽  
Vol 2013 ◽  
pp. 1-13 ◽  
Author(s):  
Yingsong Li ◽  
Wenxing Li ◽  
Qiubo Ye
Keyword(s):  
Cognitive Radio ◽  
Narrow Band ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Design Procedures ◽  
Notch Band ◽  
Band Stop Filter ◽  
Microstrip Structure ◽  
Microstrip Feed

A printed reconfigurable ultra-wideband (UWB) monopole antenna with triple narrow band-notched characteristics is proposed for cognitive radio applications in this paper. The triple narrow band-notched frequencies are obtained using a defected microstrip structure (DMS) band stop filter (BSF) embedded in the microstrip feed line and an invertedπ-shaped slot etched in the rectangular radiation patch, respectively. Reconfigurable characteristics of the proposed cognitive radio antenna (CRA) are achieved by means of four ideal switches integrated on the DMS-BSF and the invertedπ-shaped slot. The proposed UWB CRA can work at eight modes by controlling switches ON and OFF. Moreover, impedance bandwidth, design procedures, and radiation patterns are presented for analysis and explanation of this antenna. The designed antenna operates over the frequency band between 3.1 GHz and 14 GHz (bandwidth of 127.5%), with three notched bands from 4.2 GHz to 6.2 GHz (38.5%), 6.6 GHz to 7.0 GHz (6%), and 12.2 GHz to 14 GHz (13.7%). The antenna is successfully simulated, fabricated, and measured. The results show that it has wide impedance bandwidth, multimodes characteristics, stable gain, and omnidirectional radiation patterns.

scholarly journals Reconfigurable 2×1 CPW-Fed Rectangular Slot Antenna Array (RSAA) Based on Graphene For Wireless Communications

2021 ◽  
Author(s):  
Dalia Elsheakh ◽  
Osama Dardeer
Keyword(s):  
Wireless Communications ◽  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Average Gain ◽  
Rectangular Slot ◽  
High Data ◽  
Peak Gain

Abstract This article presents a 2×1 CPW ultra wideband rectangular slot antenna array (UWB-RSAA) with modified circular slot shape to support high data rate for wireless communications applications. The proposed antenna array dimensions are 0.7λo×0.8λo×0.064λo at the resonant frequency 1.8 GHz and it is fabricated on a commercially available rogers RO4003 substrate (with εr = 3.5), which is fed by using coplanar waveguide (CPW). A graphene layer is added on the other side of the substrate to achieve frequency reconfigurable and improve the antenna array gain. The -10 dB impedance bandwidth of the RSAA extends from 1.7 GHz to 2.6 GHz, from 3.2 to 3.8 GHz and from 5.2 GHz to 7 GHz with peak gain of 7.5 dBi at 6.5 GHz at 0 Volt bias over the operating band with average gain of 4.5 dBi. When the graphene bias is increased to 20 Volt, the antenna bandwidth extend from 1 GHz to 4 GHz and from 5 to 7 GHz with array peak gain 14 dBi at 3.5 GHz and average gain 7.5 dBi. The proposed array achieved linear polarized behaviour over the operating bands to be suitable for short range UWB wireless communications and object detection. All simulation carried out using 3D high frequency structure simulator (HFSS) Ansys ver. 15.

Design of asymmetrically slotted hexagonal patch antenna for high-gain UWB applications

2014 ◽  
Vol 7 (5) ◽  
pp. 571-577
Author(s):  
Raghupatruni Venkat Siva Ram Krishna ◽  
Raj Kumar ◽  
Nagendra Kushwaha
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Capacitive Reactance ◽  
Uwb Applications

A compact slot antenna for high-gain ultra wideband applications is presented. The slot is asymmetrically cut in the ground plane and is a combination of two rectangles. A hexagonal patch with two stepped coplanar waveguide-feed is used to excite the slot. The capacitive reactance of the hexagonal patch is neutralized by the inductive reactance created by the asymmetric slot and results into wider impedance matching. The measured impedance bandwidth of the proposed antenna is 11.85 GHz (2.9–14.75 GHz). The radiation patterns of the proposed antenna are found to be omni-directional in the H-plane and bi-directional in the E-plane. To enhance the gain of the antenna, a compact three-layer frequency selective surface (FSS) is used as a reflector. The overall thickness of the FSS is 3.5 mm. There is 4–5 dBi improvement in antenna gain after application of the FSS. The measured and simulated results are in good agreement.

A Broadband Circularly Polarized Cross-slotted Patch Antenna with Horizontal Meandered Strip (HMS)

Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 191-199
Author(s):  
M. K. Verma ◽  
Binod K. Kanaujia ◽  
J. P. Saini ◽  
Padam S. Saini
Keyword(s):  
Circular Polarization ◽  
Patch Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Impedance Bandwidth ◽  
Radiation Patterns ◽  
Circularly Polarized ◽  
Feeding Technique

AbstractA broadband circularly polarized slotted square patch antenna with horizontal meandered strip (HMS) is presented and studied. The HMS feeding technique provides the good impedance matching and broadside symmetrical radiation patterns. A set of cross asymmetrical slots are etched on the radiating patch to realize the circular polarization. An electrically small stub is added on the edge of the antenna for further improvement in performance. Measured 10-dB impedance bandwidth (IBW) and 3-dB axial ratio bandwidth (ARBW) of the proposed antenna are 32.31 % (3.14–4.35 GHz) and 20.91 % (3.34–4.12 GHz), respectively. The gain of the antenna is varied from 3.5 to 4.86dBi within 3-dB ARBW. Measured results matched well with the simulated results.

Sign in / Sign up

Export Citation Format

Share Document