Design of asymmetrically slotted hexagonal patch antenna for high-gain UWB applications

2014 ◽  
Vol 7 (5) ◽  
pp. 571-577
Author(s):  
Raghupatruni Venkat Siva Ram Krishna ◽  
Raj Kumar ◽  
Nagendra Kushwaha
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Capacitive Reactance ◽  
Uwb Applications

A compact slot antenna for high-gain ultra wideband applications is presented. The slot is asymmetrically cut in the ground plane and is a combination of two rectangles. A hexagonal patch with two stepped coplanar waveguide-feed is used to excite the slot. The capacitive reactance of the hexagonal patch is neutralized by the inductive reactance created by the asymmetric slot and results into wider impedance matching. The measured impedance bandwidth of the proposed antenna is 11.85 GHz (2.9–14.75 GHz). The radiation patterns of the proposed antenna are found to be omni-directional in the H-plane and bi-directional in the E-plane. To enhance the gain of the antenna, a compact three-layer frequency selective surface (FSS) is used as a reflector. The overall thickness of the FSS is 3.5 mm. There is 4–5 dBi improvement in antenna gain after application of the FSS. The measured and simulated results are in good agreement.

A CPW-fed stepped slot UWB antenna for MIMO/diversity applications

2015 ◽  
Vol 9 (1) ◽  
pp. 151-162 ◽  
Author(s):  
Raj Kumar ◽  
Neha Pazare
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Slot Antennas ◽  
Capacity Loss ◽  
Field Radiation

An ultra-wideband (UWB) slot antenna for diversity applications is introduced. The overall structure of the antenna consists of two similar coplanar waveguide (CPW)-fed stepped rectangular slots placed in an orthogonal position. The slots are asymmetric with respect to their placement in the ground plane. The CPW feeds are double stepped and terminated on hexagonal patches for better impedance matching. A wide impedance bandwidth (measured) from 3 to 12 GHz with an isolation better than 15 dB is obtained with this antenna. To improve the isolation, the design is modified and an I-shaped slot strip is introduced between the two slot antennas. With this, the isolation is brought about 25 dB of most of the band, while the impedance bandwidth remains the same (2.8–12 GHz for port 1, measured and 2.9–12 GHz for port 2, measured). The far-field radiation patterns are also measured and a peak gain of about 5 dBi is obtained. Finally, the diversity parameters such as envelope correlation coefficient and capacity loss are calculated and found to have low values. The antenna is expected to be useful for UWB diversity applications with good isolation.

scholarly journals Design of a Substrate-Integrated Fabry-Pérot Cavity Antenna forK-Band Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Truong Khang Nguyen ◽  
Ikmo Park
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Cost Effective ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Hole Array ◽  
Impedance Bandwidth ◽  
Low Profile ◽  
Fabry Perot ◽  
Feeding Structure

This paper presents the design of a planar, low-profile, high-gain, substrate-integrated Fabry-Pérot cavity antenna forK-band applications. The antenna consists of a frequency selective surface (FSS) and a planar feeding structure, which are both lithographically patterned on a high-permittivity substrate. The FSS is made of a circular hole array that acts as a partially reflecting mirror. The planar feeding structure is a wideband leaky-wave slit dipole fed by a coplanar waveguide whose ground plane acts as a perfect reflective mirror. The measured results show that the proposed antenna has an impedance bandwidth of more than 8% (VSWR ≤ 2), a maximum gain of 13.1 dBi, and a 3 dB gain bandwidth of approximately 1.3% at a resonance frequency of around 21.6 GHz. The proposed antenna features low-profile, easy integration into circuit boards, mechanical robustness, and excellent cost-effective mass production suitability.

scholarly journals Design of Ultra Wideband Antenna

2020 ◽  
Vol 8 (5) ◽  
pp. 3988-3990
Keyword(s):  
Return Loss ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Dielectric Substrate ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Rectangular Patch ◽  
Microstrip Feed

In this paper, A coplanar waveguide (CPW) ultra-wideband(UWB) antenna is designed, analyzed and simulated by computer simulation technology(CST). The proposed antenna is fabricated on FR-4 dielectric substrate. A microstrip feed line is used to excite the antenna.The ground plane is slotted to improve the impedance bandwidth (BW). Here, a rectangular patch is used as radiator and two corners out of four are truncated to improve impedance matching and UWB characterization.This antenna satisfies UWB characteristics like VSWR<2, Return loss(S11)<-10 dB,Gain<5dB and the antenna is operating within the frequency range of 1.59 to 11.87 GHz range which covers whole ultra wideband i.e. 3.1 to 10.6 GHz range.

CPW-fed circular-shaped fractal antenna with three iterations for UWB applications

2015 ◽  
Vol 9 (2) ◽  
pp. 373-379 ◽  
Author(s):  
Sarthak Singhal ◽  
Ankit Pandey ◽  
Amit Kumar Singh
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Fractal Antenna ◽  
Frequency Range ◽  
Fractal Structures ◽  
Antenna Structure ◽  
Uwb Applications ◽  
Good Agreement

A coplanar waveguide (CPW)-fed circular-shaped fractal antenna with third iterative orthogonal elliptical slot for ultra-wideband applications is presented. The bandwidth is enhanced by using successive iterations of radiating patch, CPW feedline, and tapered ground plane. An impedance bandwidth of 2.9–20.6 GHz is achieved. The designed antenna has omnidirectional radiation patterns along with average peak realized gain of 3.5 dB over the entire frequency range of operation. A good agreement is observed between the simulated and experimental results. This antenna structure has the advantages of miniaturized size and wide bandwidth in comparison to previously reported fractal structures.

scholarly journals Mutual Coupling Reduction Using a Protruded Ground Branch Structure in a Compact UWB Owl-Shaped MIMO Antenna

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
A. Mchbal ◽  
N. Amar Touhami ◽  
H. Elftouh ◽  
A. Dkiouak
Keyword(s):  
Mutual Coupling ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Mimo Antenna ◽  
Input Multiple Output ◽  
Uwb Applications

A compact ultra-wideband (UWB) multiple input-multiple output (MIMO) antenna with high isolation is designed for UWB applications. The proposed MIMO antenna consists of two identical monopole antenna elements. To enhance the impedance matching, three slots are formed on the ground plane. The arc structure as well as the semicircle with an open-end slot is employed on the radiating elements the fact which helps to extend the impedance bandwidth of the monopole antenna from 3.1 up to 10.6 GHz, which corresponds to the UWB band. A ground branch decoupling structure is introduced between the two elements to reduce the mutual coupling. Simulation and measurement results show a bandwidth range from 3.1 to 11.12 GHz with |S11_|<−15 dB, |S21_|<−20 dB, and ECC < 0.002.

Compact stepped slot antenna for ultra-wideband applications

2021 ◽  
pp. 1-7
Author(s):  
B. Hammache ◽  
A. Messai ◽  
I. Messaoudene ◽  
T. A. Denidni
Keyword(s):  
Radiation Pattern ◽  
Impedance Matching ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Back Side ◽  
Compact Size ◽  
Measurement Results ◽  
Operating Bandwidth ◽  
Uwb Applications

Abstract In this paper, a compact stepped slot antenna for ultra-wideband (UWB) applications is proposed. A very small size and UWB bandwidth operation are achieved by integrating a stepped slot in the back side of the antenna. This stepped slot is excited by using a 50 Ω-feed line in the top side of the antenna. The antenna is characterized by an impedance bandwidth between 3.05 GHz and more than 12 GHz. The dimensions of the antenna are 17 mm × 8 mm × 1.27 mm, which leads to the most compact size compared with other works in the literature. The integrated stepped slot is divided into additional elementary slots, where each elementary slot has a matching point. Adding these elementary slots allows to increase further the operating bandwidth. The radiation pattern of the compact stepped slot antenna is omnidirectional in the H-plane and bidirectional in the E-plane. The measurement results agree well with the simulated ones in terms of impedance matching and radiation pattern.

scholarly journals A compact disc loaded curved elliptical shaped ultra-wideband MIMO antenna

2018 ◽  
Vol 7 (2.7) ◽  
pp. 597
Author(s):  
EVV Satyanarayana ◽  
Vivek Kumar ◽  
D Mallikarjun Reddy ◽  
T Siva Paravathi ◽  
J Chandrasekhar Rao
Keyword(s):  
Common Ground ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Wide Band ◽  
Ultra Wideband ◽  
Portable Devices ◽  
Mimo Antenna ◽  
Uwb Applications

The ultra wide band (UWB) Multiple-Input- Multiple-Output (MIMO) antenna with coplanar waveguide (CPW) having size of 18 x 23 x 0.8mm3 is designed for ultra-wideband (UWB) applications. The designed MIMO antenna contains two symmetrical circular disc loaded curved elliptical monopoles on top of the substrate and common ground plane with Y slot and extended T-shaped stub on bottom of substrate. The T- shape stub is placed on the ground plane to have the better antenna impedance matching and to enhance the isolation between the two antenna ports. To further improve the isolation in between the ports 1 and 2, and also on the ground plane a Y-shaped slot is fixed. Good impedance matching (|S11| < -10dB) in the range from 2.8GHz to 12 GHz is provided by the proposed antenna, and an enhanced isolation of -27dB, low ECC of below 0.002, an acceptable gain of about 7 dBi and an efficiency of above 90%. The obtained result proves that the designed antenna is more appropriate for the portable devices.  

Coplanar waveguide-fed ISM band implantable crossed-type triangular slot antenna for biomedical applications

2013 ◽  
Vol 6 (2) ◽  
pp. 167-172 ◽  
Author(s):  
Srinivasan Ashok Kumar ◽  
Thangavelu Shanmuganantham
Keyword(s):  
Biomedical Applications ◽  
Biomedical Application ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
High Gain ◽  
Slot Antenna ◽  
Center Frequency ◽  
Ism Band ◽  
High Data ◽  
Implantable Antenna

A novel coplanar waveguide fed Industrial, Scientific, and Medical (ISM) band implantable crossed-type triangular slot antenna is proposed for biomedical applications. The antenna operates at the center frequency of 2450 MHz, which is in ISM band, to support GHz wideband communication for high-data rate implantable biomedical application. The size of the antenna is 78 mm3 (10 mm × 12 mm × 0.65 mm). The simulated and measured bandwidths are 7.9 and 8.2% at the resonant frequency of 2.45 GHz. The specific absorption rate distribution induced by the implantable antenna inside a human body tissue model is evaluated. The communication between the implanted antenna and external device is also examined. The proposed antenna has substantial merits such as miniaturization, lower return loss, better impedance matching, and high gain over other implanted antennas.

scholarly journals Reconfigurable 2×1 CPW-Fed Rectangular Slot Antenna Array (RSAA) Based on Graphene for Wireless Communications

2021 ◽  
Vol 36 (6) ◽  
pp. 788-795
Author(s):  
Dalia Elsheakh ◽  
Osama Dardeer
Keyword(s):  
Wireless Communications ◽  
Antenna Array ◽  
Coplanar Waveguide ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Impedance Bandwidth ◽  
Average Gain ◽  
Rectangular Slot ◽  
High Data ◽  
Peak Gain

This article presents a 2×1 CPW ultra wideband rectangular slot antenna array (UWB-RSAA) with a modified circular slot shape to support a high data rate for wireless communications applications. The proposed antenna array dimensions are 0.7λ×0.8λo×0.064λo at the resonant frequency 1.8 GHz. It is fabricated on Rogers RO4003 substrate and fed by using a coplanar waveguide (CPW). A graphene layer is added on one side of the substrate to realize frequency reconfigurability and improve the array gain. The proposed array acquires -10 dB impedance bandwidth of the RSAA that extends from 1.7 GHz to 2.6 GHz, from 3.2 to 3.8 GHz, and from 5.2 GHz to 7 GHz. The proposed array achieved a realized peak gain of 7.5 dBi at 6.5 GHz at 0 Volt bias with an average gain of 4.5 dBi over the operating band. When the graphene bias is increased to 20 Volt, the antenna bandwidth extends from 1 GHz to 4 GHz and from 5 to 7 GHz with a peak gain of 14 dBi at 3.5 GHz and an average gain of 7.5 dBi. The linearly polarized operation of the proposed array over the operating bands makes it suitable for short-range wireless communications .

scholarly journals Bandwidth Enhancement Technique of the Meandered Monopole Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-6
Author(s):  
Chien-Jen Wang ◽  
Dai-Heng Hsieh
Keyword(s):  
Communication Systems ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
Ground Plane ◽  
Matching Condition ◽  
Resonant Mode ◽  
Monopole Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Feeding Structure

A small dual-band monopole antenna with coplanar waveguide (CPW) feeding structure is presented in this paper. The antenna is composed of a meandered monopole, an extended conductor tail, and an asymmetrical ground plane. Tuning geometrical structure of the ground plane excites an additional resonant frequency band and thus enhances the impedance bandwidth of the meandered monopole antenna. Unlike the conventional monopole antenna, the new resonant mode is excited by a slot trace of the CPW transmission line. The radiation performance of the slot mode is as similar as that of the monopole. The parametrical effect of the size of the one-side ground plane on impedance matching condition has been derived by the simulation. The measured impedance bandwidths, which are defined by the reflection coefficient of −6 dB, are 186 MHz (863–1049 MHz, 19.4%) at the lower resonant band and 1320 MHz (1490–2810 MHz, 61.3%) at the upper band. From the results of the reflection coefficients of the proposed monopole antenna, the operated bandwidths of the commercial wireless communication systems, such as GSM 900, DCS, IMT-2000, UMTS, WLAN, LTE 2300, and LTE 2500, are covered for uses.

Sign in / Sign up

Export Citation Format

Share Document