scholarly journals The Use of Low-Budget Self-Assembly Sets for Research and Robotics Education

2019 ◽  
Vol 27 (1) ◽  
pp. 55-62
Author(s):  
Piotr Cheluszka
Keyword(s):  
Self Assembly ◽  
Inverse Kinematics ◽  
Control Algorithm ◽  
Practical Knowledge ◽  
Low Cost ◽  
Serial Communication ◽  
Control Algorithms ◽  
Robotics Education ◽  
Drive Systems ◽  
And Robotics

AbstractThe article presents the possibilities of using easily accessible and inexpensive educational sets in scientific research and the process of robotics education. Such kits allow the exploration of theoretical and practical knowledge taking into account aspects of engineering, such as: mechanics, drive systems, sensor systems, control and programming of robots. Models of robots built from inexpensive components can also be used to test new solutions in the field of construction or control algorithms before they are used in real applications. As an example, the model of the palletizing manipulator for self-assembly was shown, the control of which was based on the Arduino Uno controller, while the drives were implemented using low-cost hobby-grade servos. For the kinematic structure of this manipulator, the forward and inverse kinematics task for the position has been discussed. This constituted the basis for the development of a manual control algorithm implemented in the controller – using a joystick and programmed – based on the data sent to the controller using serial communication from a PC. The article presents the results of the computer simulation of the manipulator kinematics, the hardware and software implementation of the robot model and the effects of its operation. The possibility of expanding the control system with additional elements to increase its functionality was indicated.

scholarly journals Design and development of 6-DOF system for Virtual Bicycle

2016 ◽  
Vol 5 (2) ◽  
Author(s):  
Hwa Jen Yap ◽  
Jenn Guey NG ◽  
Zanatul Aqillah ZAKARIA ◽  
Zahari Taha ◽  
Siow-Wee Chang ◽  
...  
Keyword(s):  
Inverse Kinematics ◽  
Low Cost ◽  
Control Algorithms ◽  
Practical Training ◽  
Motion Platform ◽  
Optical Encoder ◽  
Construction Time ◽  
Further Development ◽  
Design Dimension ◽  
Track Cycling

There are many variations to the competition that takes place in Olympic track cycling. Hence, a bicycle simulator will bring a lot of benefits to the coaches and the athletes in a practical training. It is extremely low cost compared to a real Velodrome track which is required long construction time due to the unique geometry and size. In this project, a 6-degree-of-freedom (6-DOF) motion platform is designed and developed to simulate the Velodrome track cycling. The parallel manipulator was chosen to control the moving platform because of higher accuracy and greater weight to strength ratio compare to serial manipulator. The 6-DOF platform is controlled by linear actuators and micro-controller. An optical encoder was installed for closed-loop position feedback control. An inverse kinematics model was developed to obtain the movement of the platform, and it was validated with its CAD model. Besides, a design feasibility program was developed to calculate the optimum design dimension of the motion platform. All the positions (3-axes) and orientations (3-rotational axes) data are tracked for analysis purpose. A lab-scale prototype was successfully built for the analysis and validation purpose. A standard Velodrome track dimensions was chosen to be simulated. On the other hand, a gyro accelerometer was installed at the platform to acquire the actual motion of the platform. The data will be used to validate the control algorithms and accuracy of the motion platform. The experiment was conducted and the results are analyzed for further development.

Four Degrees of Freedom Robot Arm, Low-Cost Competition in the Design and Development

2013 ◽  
Vol 5 (1) ◽  
pp. 50-65 ◽  
Author(s):  
Liu Hongcong
Keyword(s):  
Inverse Kinematics ◽  
Optical Materials ◽  
Degrees Of Freedom ◽  
Low Cost ◽  
Serial Communication ◽  
Materials Processing ◽  
Robot Arm ◽  
Servo Motor ◽  
Industrial Labor ◽  
Normal Work

The focus of this work is to design, develop and implement enhanced control and competitive robot arm thick and short cost. Design of four degree of freedom and talent of robot arm is to complete the accurate and simple tasks, such as optical materials processing, will be integrated into the mobile platform, as an assistant for the industrial labor force. Between the robot arm equipped with weapons and arm movements associated with the plurality of servo motor. Servo motor, encoder, so as to realize no controller includes. To control the robot, using Lab view, to the computation of the inverse kinematics of serial communication and proper angle, a micro controller, servo motor and drive ability of modify the location, velocity and acceleration. The robot arm was tested and verified, results show that, its normal work.

scholarly journals Preliminary Analysis of a Lightweight and Deployable Soft Robot for Space Applications

2021 ◽  
Vol 11 (6) ◽  
pp. 2558
Author(s):  
Mario Troise ◽  
Matteo Gaidano ◽  
Pierpaolo Palmieri ◽  
Stefano Mauro
Keyword(s):  
Preliminary Analysis ◽  
Inverse Kinematics ◽  
Control Algorithm ◽  
Dynamic Models ◽  
Robotic Systems ◽  
Inflation Pressure ◽  
Space Applications ◽  
Space Industry ◽  
Rigid Body Model ◽  
Soft Manipulator

The rising interest in soft robotics, combined to the increasing applications in the space industry, leads to the development of novel lightweight and deployable robotic systems, that could be easily contained in a relatively small package to be deployed when required. The main challenges for soft robotic systems are the low force exertion and the control complexity. In this manuscript, a soft manipulator concept, having inflatable links, is introduced to face these issues. A prototype of the inflatable link is manufactured and statically characterized using a pseudo-rigid body model on varying inflation pressure. Moreover, the full robot model and algorithms for the load and pose estimation are presented. Finally, a control strategy, using inverse kinematics and an elastostatic approach, is developed. Experimental results provide input data for the control algorithm, and its validity domain is discussed on the basis of a simulation model. This preliminary analysis puts the basis of future advancements in building the robot prototype and developing dynamic models and robust control.

Effects of Dynamic Model Errors in Task-Priority Operational Space Control

Robotica ◽  
2021 ◽  
pp. 1-12
Author(s):  
Paolo Di Lillo ◽  
Gianluca Antonelli ◽  
Ciro Natale
Keyword(s):  
Inverse Kinematics ◽  
Degrees Of Freedom ◽  
Inverse Dynamics ◽  
Null Space ◽  
Control Algorithms ◽  
Model Errors ◽  
Operational Space ◽  
Dynamic Level ◽  
Concurrent Tasks ◽  
Modeling Errors

SUMMARY Control algorithms of many Degrees-of-Freedom (DOFs) systems based on Inverse Kinematics (IK) or Inverse Dynamics (ID) approaches are two well-known topics of research in robotics. The large number of DOFs allows the design of many concurrent tasks arranged in priorities, that can be solved either at kinematic or dynamic level. This paper investigates the effects of modeling errors in operational space control algorithms with respect to uncertainties affecting knowledge of the dynamic parameters. The effects on the null-space projections and the sources of steady-state errors are investigated. Numerical simulations with on-purpose injected errors are used to validate the thoughts.

scholarly journals Multiscale additive manufacturing of polymers using 3D photo-printable self-assembling ionic liquid monomers

2019 ◽  
Vol 4 (3) ◽  
pp. 580-585 ◽  
Author(s):  
Bineh G. Ndefru ◽  
Bryan S. Ringstrand ◽  
Sokhna I.-Y. Diouf ◽  
Sönke Seifert ◽  
Juan H. Leal ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Additive Manufacturing ◽  
Self Assembly ◽  
Low Cost ◽  
Low Resolution ◽  
Top Down ◽  
Bottom Up ◽  
Cost Approach ◽  
Self Assembling ◽  
Nanoscale Features

Combining bottom-up self-assembly with top-down 3D photoprinting affords a low cost approach for the introduction of nanoscale features into a build with low resolution features.

Dynamic Simulation Control Algorithm Based on the Time Domain

2014 ◽  
Vol 568-570 ◽  
pp. 1020-1025
Author(s):  
Zhuo Wei Jiang ◽  
Chun Ming Gao
Keyword(s):  
Dynamic Simulation ◽  
Time Domain ◽  
Control Algorithm ◽  
Low Cost ◽  
Analog Filter ◽  
Cost Performance ◽  
Dynamic Simulator ◽  
Simulation Control ◽  
The Time Domain ◽  
Computation Speed

In view of badly transplanting of analog filter and low cost performance of digital filter for the washing out signal methods used by dynamic simulator, this paper proposed a computer intelligent time domain method. We decompose signal with the computer intelligence in the time domain, and convert the signal into the corresponding movement form respectively, then get the final result by overlaying them. The experimental results show that this method not only can achieve the effect of the traditional methods, better portability and faster computation speed, but also can be achieved directly on general computers.

scholarly journals Vibration Control of Buildings Using Magnetorheological Damper: A New Control Algorithm

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Aly Mousaad Aly
Keyword(s):  
Vibration Control ◽  
Control Algorithm ◽  
Fuzzy Logic Controller ◽  
Mr Damper ◽  
Maximum Energy ◽  
Magnetorheological Damper ◽  
Control Algorithms ◽  
Earthquake Loads ◽  
Building Model ◽  
Lyapunov Controller

This paper presents vibration control of a building model under earthquake loads. A magnetorheological (MR) damper is placed in the building between the first floor and ground for seismic response reduction. A new control algorithm to command the MR damper is proposed. The approach is inspired by a quasi-bang-bang controller; however, the proposed technique gives weights to control commands in a fashion that is similar to a fuzzy logic controller. Several control algorithms including decentralized bang-bang controller, Lyapunov controller, modulated homogeneous friction controller, maximum energy dissipation controller, and clipped-optimal controller are used for comparison. The new controller achieved the best reduction in maximum interstory drifts and maximum absolute accelerations over all the control algorithms presented. This reveals that the proposed controller with the MR damper is promising and may provide the best protection to the building and its contents.

The Use of Damping Based Semi-Active Control Algorithms in the Mechanical Smart-Spring System

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Wander Gustavo Rocha Vieira ◽  
Fred Nitzsche ◽  
Carlos De Marqui
Keyword(s):  
Active Control ◽  
Control Algorithm ◽  
Control Strategies ◽  
Vibration Reduction ◽  
Flow Analysis ◽  
Coupled Systems ◽  
Control Technique ◽  
Control Algorithms ◽  
Control Techniques ◽  
Spring Mechanism

In recent decades, semi-active control strategies have been investigated for vibration reduction. In general, these techniques provide enhanced control performance when compared to traditional passive techniques and lower energy consumption if compared to active control techniques. In semi-active concepts, vibration attenuation is achieved by modulating inertial, stiffness, or damping properties of a dynamic system. The smart spring is a mechanical device originally employed for the effective modulation of its stiffness through the use of semi-active control strategies. This device has been successfully tested to damp aeroelastic oscillations of fixed and rotary wings. In this paper, the modeling of the smart spring mechanism is presented and two semi-active control algorithms are employed to promote vibration reduction through enhanced damping effects. The first control technique is the smart-spring resetting (SSR), which resembles resetting control techniques developed for vibration reduction of civil structures as well as the piezoelectric synchronized switch damping on short (SSDS) technique. The second control algorithm is referred to as the smart-spring inversion (SSI), which presents some similarities with the synchronized switch damping (SSD) on inductor technique previously presented in the literature of electromechanically coupled systems. The effects of the SSR and SSI control algorithms on the free and forced responses of the smart-spring are investigated in time and frequency domains. An energy flow analysis is also presented in order to explain the enhanced damping behavior when the SSI control algorithm is employed.

Frequency Shaped Semi-Active Control for Magnetorheological Fluid-Based Vibration Control Systems

2013 ◽  
Author(s):  
Young-Tai Choi ◽  
Norman M. Wereley ◽  
Gregory J. Hiemenz
Keyword(s):  
Vibration Control ◽  
Control Systems ◽  
Active Control ◽  
Control Algorithm ◽  
Active Vibration Control ◽  
Control Algorithms ◽  
Model Parameters ◽  
Mr Fluid ◽  
Control Current ◽  
Active Vibration

Novel semi-active vibration controllers are developed in this study for magnetorheological (MR) fluid-based vibration control systems, including: (1) a band-pass frequency shaped semi-active control algorithm, (2) a narrow-band frequency shaped semi-active control algorithm. These semi-active vibration control algorithms designed without resorting to the implementation of an active vibration control algorithms upon which is superposed the energy dissipation constraint. These new Frequency Shaped Semi-active Control (FSSC) algorithms require neither an accurate damper (or actuator) model, nor system identification of damper model parameters for determining control current input. In the design procedure for the FSSC algorithms, the semi-active MR damper is not treated as an active force producing actuator, but rather is treated in the design process as a semi-active dissipative device. The control signal from the FSSC algorithms is a control current, and not a control force as is typically done for active controllers. In this study, two FSSC algorithms are formulated and performance of each is assessed via simulation. Performance of the FSSC vibration controllers is evaluated using a single-degree-of-freedom (DOF) MR fluid-based engine mount system. To better understand the control characteristics and advantages of the two FSSC algorithms, the vibration mitigation performance of a semi-active skyhook control algorithm, which is the classical semi-active controller used in base excitation problems, is compared to the two FSSC algorithms.

Sign in / Sign up

Export Citation Format

Share Document