scholarly journals Evaluation of passive autocatalytic recombiners operation efficiency by means of the lumped parameter approach

Nukleonika ◽  
2015 ◽  
Vol 60 (2) ◽  
pp. 339-345 ◽  
Author(s):  
Tomasz Bury
Keyword(s):  
Hydrogen Generation ◽  
Cooling System ◽  
Component Mixture ◽  
Pressurized Water ◽  
Water Reactor ◽  
Safety Issues ◽  
Loss Of Coolant Accident ◽  
Lumped Parameter ◽  
Core Cooling ◽  
Parameter Approach

Abstract The problem of hydrogen behavior in containment buildings of nuclear reactors belongs to thermal-hydraulic area. Taking into account the size of systems under consideration and, first of all, safety issues, such type of analyses cannot be done by means of full-scale experiments. Therefore, mathematical modeling and numerical simulations are widely used for these purposes. A lumped parameter approach based code HEPCAL has been elaborated in the Institute of Thermal Technology of the Silesian University of Technology for simulations of pressurized water reactor containment transient response. The VVER-440/213 and European pressurised water reactor (EPR) reactors containments are the subjects of analysis within the framework of this paper. Simulations have been realized for the loss-of-coolant accident scenarios with emergency core cooling system failure. These scenarios include core overheating and hydrogen generation. Passive autocatalytic recombiners installed for removal of hydrogen has been taken into account. The operational efficiency of the hydrogen removal system has been evaluated by comparing with an actual hydrogen concentration and flammability limit. This limit has been determined for the three-component mixture of air, steam and hydrogen. Some problems related to the lumped parameter approach application have been also identified.

scholarly journals Thermal Hydraulic Analysis of a Nuclear Reactor due to Loss of Coolant Accident with and without Emergency Core Cooling System

2020 ◽  
Vol 01 (02) ◽  
pp. 53-60
Author(s):  
Pronob Deb Nath ◽  
Kazi Mostafijur Rahman ◽  
Md. Abdullah Al Bari
Keyword(s):  
Nuclear Reactor ◽  
Cooling System ◽  
Computational Study ◽  
Reactor Core ◽  
Primary Circuit ◽  
Feed Water ◽  
Pressurized Water ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Core Cooling

This paper evaluates the thermal hydraulic behavior of a pressurized water reactor (PWR) when subjected to the event of Loss of Coolant Accident (LOCA) in any channel surrounding the core. The accidental break in a nuclear reactor may occur to circulation pipe in the main coolant system in a form of small fracture or equivalent double-ended rupture of largest pipe connected to primary circuit line resulting potential threat to other systems, causing pressure difference between internal parts, unwanted core shut down, explosion and radioactivity release into environment. In this computational study, LOCA for generation III+ VVER-1200 reactor has been carried out for arbitrary break at cold leg section with and without Emergency Core Cooling System (ECCS). PCTRAN, a thermal hydraulic model-based software developed using real data and computational approach incorporating reactor physics and control system was employed in this study. The software enables to test the consequences related to reactor core operations by monitoring different operating variables in the system control bar. Two types of analysis were performed -500% area break at cold leg pipe due to small break LOCA caused by malfunction of the system with and without availability of ECCS. Thermal hydraulic parameters like, coolant dynamics, heat transfer, reactor pressure, critical heat flux, temperature distribution in different sections of reactor core have also been investigated in the simulation. The flow in the reactor cooling system, steam generators steam with feed-water flow, coolant steam flow through leak level of water in different section, power distribution in core and turbine were plotted to analyze their behavior during the operations. The simulation showed that, LOCA with unavailability of Emergency Core Cooling System (ECCS) resulted in core meltdown and release of radioactivity after a specific time.

Risk-Informed Analysis for Accident Tolerant Fuel in Pressurized Water Reactors

2020 ◽  
Author(s):  
Zhegang Ma ◽  
Carlo Parisi ◽  
Cliff Davis ◽  
Sai Zhang ◽  
Hongbin Zhang
Keyword(s):  
System Analysis ◽  
Hydrogen Generation ◽  
Cooling System ◽  
Pressurized Water ◽  
Water Reactor ◽  
Core Damage ◽  
Systems Research ◽  
Research Activities ◽  
Near Term ◽  
Accident Scenarios

Abstract This paper presents the research activities performed by Idaho National Laboratory (INL) for the Department of Energy (DOE) Light Water Reactor Sustainability (LWRS) Program, Risk-Informed System Analysis (RISA) Pathway, Enhanced Resilient Plant (ERP) Systems research, using the probabilistic risk assessment (PRA) tool SAPHIRE and the deterministic best estimate tool RELAP5-3D for risk-informed analysis. The ERP research supports DOE and industry initiatives by developing Accident Tolerant Fuel (ATF), the Diverse and Flexible Coping Strategy (FLEX), and passive cooling system designs to enhance existing reactors’ safety features (both active and passive) and to substantially reduce operating costs of nuclear power plants (NPPs) through risk-informed approaches to analyze the plant enhancements and their characterization. The risk-informed analysis used SAPHIRE and RELAP5-3D to evaluate the risk impacts from near-term ATF (FeCrAl and Chromium-coated clads) on a generic Westinghouse three-loop pressurized water reactor (PWR) under the following accident scenarios: station blackout (SBO), loss of feedwater (LOFW), steam generator tube rupture (SGTR), loss-of-coolant accidents (LOCAs), locked rotor transient, turbine trip transient, anticipated transient without scram (ATWS), and main steam line break (MSLB). The RELAP5-3D simulations included the time to core damage, time to 0.5 kilograms hydrogen generation, and total hydrogen generation. The simulation results show there are modest gains of coping time (delay of time to core damage) due to efficacy of the near-term ATF designs in various accident scenarios. The risk benefits on behalf of the core damage frequency (CDF) brought by the ATF designs would be small for most of the scenarios. However, results revealing much less hydrogen being produced at the time of core damage show a clear benefit in adopting ATFs.

Sensitivity Study of LOCA-Generated Debris on the Pressure Drop of Fuel Assembly

2017 ◽  
Author(s):  
Hammad Aslam Bhatti ◽  
Zhangpeng Guo ◽  
Weiqian Zhuo ◽  
Shahroze Ahmed ◽  
Da Wang ◽  
...  
Keyword(s):  
Pressure Drop ◽  
Fuel Assembly ◽  
Cooling System ◽  
Safety Issue ◽  
Cooling Water ◽  
Sensitivity Study ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Loss Of Coolant Accident ◽  
Core Cooling

The coolant of emergency core cooling system (ECCS), for long-term core cooling (LTCC), comes from the containment sump under the loss-of-coolant accident (LOCA). In the event of LOCA, within the containment of the pressurized water reactor (PWR), thermal insulation of piping and other materials in the vicinity of the break could be dislodged. A fraction of these dislodged insulation and other materials would be transported to the floor of the containment by coolant. Some of these debris might get through strainer and eventually accumulate over the suction sump screens of the emergency core cooling systems (ECCS). So, these debris like fibrous glass, fibrous wool, chemical precipitates and other particles cause pressure drop across the sump screen to increase, affecting the cooling water recirculation. As to address this safety issue, the downstream effect tests were performed over full-scale mock up fuel assembly. Sensitivity studies on pressure drop through LOCA-generated debris, deposited on fuel assembly, were performed to evaluate the effects of debris type and flowrate. Fibrous debris is the most crucial material in terms of causing pressure drop, with fibrous wool (FW) debris being more efficacious than fibrous glass (FG) debris.

Recapturing Net Positive Suction Head Margins in Boiling Water Reactor Emergency Core Cooling Systems

2017 ◽  
Author(s):  
Alan J. Bilanin ◽  
Andrew E. Kaufman ◽  
Warren J. Bilanin
Keyword(s):  
Cooling System ◽  
Cooling Water ◽  
Boiling Water ◽  
Boiling Water Reactor ◽  
Cooling Systems ◽  
Water Reactor ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Core Cooling ◽  
Reactor Pressure

Boiling Water Reactor pressure suppression pools have stringent housekeeping requirements, as well as restrictions on amounts and types of insulation and debris that can be present in the containment, to guarantee that suction strainers that allow cooling water to be supplied to the reactor during a Loss of Coolant Accident remain operational. By introducing “good debris” into the cooling water, many of these requirements/restrictions can be relaxed without sacrificing operational readiness of the cooling system.

Safety Assessment and Accident Analysis of VVER-1000/466B With Active and Passive Safety Systems for Belene NPP

2014 ◽  
Author(s):  
Luben Sabotinov ◽  
Borislav Dimitrov ◽  
Giovanni B. Bruna
Keyword(s):  
Cooling System ◽  
Safety Evaluation ◽  
Safety Issues ◽  
Passive Safety Systems ◽  
Loss Of Coolant Accident ◽  
Depth Analysis ◽  
Active Safety Systems ◽  
Accident Scenarios ◽  
Core Cooling ◽  
Safety Systems

The paper presents the methodology adopted to assess the Interim Safety Analysis Report (ISAR) of the Belene NPP in the framework of the contract between the Bulgarian Nuclear Regulatory Authority (BNRA) and RISKAUDIT (IRSN&GRS). It stresses the in-depth analysis carried-out for several relevant-to-safety issues and illustrates in some detail the investigation of the Large Break Loss of Coolant Accident (LB LOCA) with loss of power and failure of the active part of the Emergency Core Cooling System (High Pressure and Low Pressure Safety Injection pumps), performed with the French best estimate thermal-hydraulic code CATHARE. The role, problems and efficiency of the passive and active safety systems during the accident scenarios are discussed. Finally, the main conclusions of the safety evaluation of the Belene NPP project are summarized.

Sensitivity Analysis of a PWR Response During a Loss of Coolant Accident Under a Hypothetical Core Blockage Scenario Using RELAP5-3D

2014 ◽  
Author(s):  
Timothy Crook ◽  
Rodolfo Vaghetto ◽  
Alessandro Vanni ◽  
Yassin A. Hassan
Keyword(s):  
Cooling System ◽  
Safety Concern ◽  
System Response ◽  
Flow Paths ◽  
Pressurized Water ◽  
The Core ◽  
Loss Of Coolant Accident ◽  
Loss Of Coolant ◽  
Pass Through ◽  
Core Cooling

During a Loss of Coolant Accident (LOCA) a substantial amount of debris may be generated in containment during the blowdown phase. This debris can become a major safety concern since it can potentially impact the Emergency Core Cooling System (ECCS). Debris, produced by the LOCA break flow and transported to the sump, could pass through the filtering systems (debris bed and sump strainer) in the long term cooling phase. If the debris were to sufficiently accumulate at the core inlet region, the core flow could theoretically decrease, affecting the core coolability. Under such conditions, the removal of decay heat would only be possible by coolant flow reaching the core through alternative flow paths, such as the core bypass (baffle). There are certain plant specific features that can play a major role in core cooling from this bypass flow. One of these of key interest is the pressure relief holes. A typical 4-loop Pressurized Water Reactor (PWR) was modeled using RELAP5-3D to simulate the reactor system response during the phases of a large break LOCA and the effectiveness of core cooling under full core blockage was analyzed. The simulation results showed that the presence of alternative flow paths may significantly increase core coolability and prevent cladding temperatures from reaching safety limits, while the lack of LOCA holes may lead to a conservative over-prediction of the cladding temperature.

The Benefits of Using a Risk-Informed Approach to Resolving GSI-191

2012 ◽  
Author(s):  
Timothy D. Sande ◽  
Gilbert L. Zigler ◽  
Ernie J. Kee ◽  
Bruce C. Letellier ◽  
C. Rick Grantom ◽  
...  
Keyword(s):  
Failure Modes ◽  
Cooling System ◽  
Safety Issue ◽  
Acceptance Criteria ◽  
Pressurized Water ◽  
Water Reactor ◽  
Advantages And Disadvantages ◽  
Spray System ◽  
Core Cooling

The emergency core cooling system (ECCS) and containment spray system (CSS) in a pressurized water reactor (PWR) are designed to safely shutdown the plant following a loss of coolant accident (LOCA). The assurance of long term core cooling in PWRs following a LOCA has a long history dating back to the NRC studies of the mid 1980s associated with Unresolved Safety Issue (USI) A-43. Results of the NRC research on boiling water reactor (BWR) ECCS suction strainer blockage of the early 1990s identified new phenomena and failure modes that were not considered in the resolution of USI A-43. As a result of these concerns, Generic Safety Issue (GSI) 191 was identified in September 1996 related to debris clogging of the ECCS sump suction strainers at PWRs. Although plants have taken steps to prevent strainer clogging (by increasing the screen area, for example), satisfactory closure of this issue has proved elusive due to long term cooling issues and the effect of chemical precipitates on head loss. Previous investigators have identified bounding scenarios using conservative inputs, methods, and acceptance criteria. The acceptance criteria are applied in a “pass/fail” fashion that ignores risk. That is, if the results are acceptable, the issue has been resolved. Otherwise, it is necessary to either redo the analysis with partial relaxation of analytical conservatisms or perform additional plant modifications to ensure that the acceptance criteria are met. This article describes a new approach to close out the GSI-191 issue by evaluating the risk associated with ECCS performance on post-LOCA core cooling as a basis to change the plant license. The approach includes an assessment of LOCA frequencies as a function of break size at locations along the reactor coolant system, as well as a full quantification of the uncertainties associated with LOCA frequencies and the generation, transport, accumulation, and subsequent impact of debris on ECCS performance. The overall frameworks for the deterministic and risk-informed approaches are summarized with emphasis on the risk-informed method. The differences between the deterministic approach taken in the past and the new risk-informed approach are described. Advantages and disadvantages between the two methods are described and contrasted for the GSI-191 issue. The South Texas Project (STP) GSI-191 risk-informed closure efforts are presented.

IIST Passive Core Cooling on Pressurizer Top Break

2003 ◽  
Author(s):  
Tay-Jian Liu ◽  
Chien-Hsiung Lee
Keyword(s):  
Cooling System ◽  
Test Results ◽  
Pressurized Water Reactor ◽  
Relief Valve ◽  
Pressurized Water ◽  
Hydraulic Behavior ◽  
Loss Of Coolant Accident ◽  
Accident Management ◽  
Loss Of Coolant ◽  
Core Cooling

Two experiments for small-break loss-of-coolant accident on pressurizer top were conducted at the INER Integral System Test (IIST) facility to investigate thermal-hydraulic behavior of a passive core cooling system (PCCS) in a Westinghouse pressurized water reactor (PWR). The test results are compared with the previous IIST tests under the same initial and boundary conditions for a power-operated relief valve (PORV) stuck-open incident. The objectives of this study are to understand of the key thermal-hydraulic phenomena associated with PCCS and to compare the effectiveness of accident management with or without PCCS. The break sizes were scaled down based on one and all three fully-opened PORVs. This paper identified the key phenomena commonly observed and the phenomena unique to a PWR with PCCS.

Application of Thermal Hydraulic and Severe Accident Code SOCRAT/V3 to Bottom Water Reflood Experiment QUENCH-LOCA-1

2016 ◽  
Vol 2 (2) ◽  
Author(s):  
Alexander Vasiliev ◽  
Juri Stuckert
Keyword(s):  
Nuclear Power ◽  
Hydrogen Generation ◽  
Cooling System ◽  
Reactor Core ◽  
Severe Accident ◽  
Loss Of Coolant Accident ◽  
Post Test ◽  
Core Cooling ◽  
Modeling Code ◽  
Code Quality

This study aims to (1) use the thermal hydraulic and severe fuel damage (SFD) best-estimate computer modeling code SOCRAT/V3 for post-test calculation of QUENCH-LOCA-1 experiment and (2) estimate the SOCRAT code quality of modeling. The new QUENCH-LOCA bundle tests with different cladding materials will simulate a representative scenario for a loss-of-coolant-accident (LOCA) nuclear power plant (NPP) accident sequence in which the overheated (up to 1050°C) reactor core would be reflooded from the bottom by the emergency core cooling system (ECCS). The test QUENCH-LOCA-1 was successfully performed at the KIT, Karlsruhe, Germany, on February 2, 2012, and was the first test for this series after the commissioning test QUENCH-LOCA-0 conducted earlier. The SOCRAT/V3-calculated results describing thermal hydraulic, hydrogen generation, and thermomechanical behavior including rods ballooning and burst are in reasonable agreement with the experimental data. The results demonstrate the SOCRAT code’s ability for realistic calculation of complicated LOCA scenarios.

Sign in / Sign up

Export Citation Format

Share Document