Levofloxacin loaded gelrite-cellulose polymer based sustained ocular drug delivery: formulation, optimization and biological study

2016 ◽  
Vol 36 (8) ◽  
pp. 761-769 ◽  
Author(s):  
Mohammed Aslam ◽  
Syed Sarim Imam ◽  
Mohammed Aqil ◽  
Yasmin Sultana ◽  
Asgar Ali
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Methyl Cellulose ◽  
Fickian Diffusion ◽  
Gelling Agent ◽  
Biological Study ◽  
Sterility Testing ◽  
Ocular Irritation

Abstract In the present work, levofloxacin in situ gel formulation was developed using gelrite as a gelling agent in combination with hydroxy propyl methyl cellulose. The developed formulations were evaluated for physicochemical parameters, in vitro release, ex vivo transcorneal study, sterility testing, antimicrobial efficacy, ocular irritation study, histopathological and stability evaluation. The in vitro drug release study showed the extended drug release up to 12 h, and the best fit kinetic model was found to be Peppas model (R2=0.9654), suggesting a Fickian diffusion process. The developed formulations showed optimized physicochemical results for all parameters. The optimized formulation showed therapeutically efficacious antimicrobial activity. Hens egg test-chorioallantoin membrane assay (HET-CAM) showed a mean score of 0.33 up to 24 h, which indicated the non-irritant property of the developed formulation. This non-irritant and stable in situ gel formulation of levofloxacin was found to be promising and safe for use as ocular delivery. The degradation rate constant and shelf life of developed optimized formulation (F14) were found to be low (1.213×10-4 at 25°C) and 2.14 years, respectively. This renders them favorable for ocular use as they would gel once in contact with the tear fluid, thus reducing nasolacrimal drainage, but would thin upon shearing, preventing ocular irritation and therefore induced lacrimation.

Potential Ganciclovir Liposomal Thermoreversible Gel for Ophthalmic Delivery Using Box-Behnken Statistical Design and Efficacy Assessment Study in Rabbit Model

2019 ◽  
Vol 9 (7) ◽  
pp. 950-957
Author(s):  
Yanjuan Sheng ◽  
Yanni Zhu
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Rabbit Model ◽  
Methyl Cellulose ◽  
Temperature Sensitive ◽  
Potential Candidate ◽  
Core System ◽  
Thermoreversible Gel

The present study focuses on development of novel thermoreversible ophthalmic drug delivery system using Ganciclovir as potential candidate for treatment of various ocular infections. The formulation was prepared for thermoreversible gel which incorporates liposomes of Ganciclovir as core system. Thermoreversible gel prolongs delivery of drug with use of combination of polymers like Poloxamer, Hydroxypropyl methyl cellulose. The Poloxamer used here serves as temperature sensitive polymer. Thus prepared system was evaluated for various parameters. Liposomes found to be complies with basic requirement like non-leak ability, high in-vitro drug release with optimum encapsulation efficiency. The results obtained showed that the in situ gel is clear and transparent (prime requirement for ophthalmic product) with high gelling capacity and moderately viscous liquid (1454 cp), highest bioadhesive strength (Dyne/cm2). The ex-vivo study was also done and compared with marketed eye drop formulation. The results showed superiority of in situ gel formulation over eye in sustaining the drug release over prolong period of time. The haemolytic study performed proved the non-haemolytic nature of formulation.

Design and Evaluation of Ion Activated In-Situ Ophthalmic Gel of Brimonidine Tartarate Using Kappa Carrageenan

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Vazir Ashfaq Ahmed ◽  
Divakar Goli
Keyword(s):  
Drug Release ◽  
Factorial Design ◽  
Chorioallantoic Membrane ◽  
Methyl Cellulose ◽  
Gelling Agent ◽  
Release Formulation ◽  
23 Factorial Design ◽  
Kappa Carrageenan

The objective of the study was to develop optimized formulation of In-situ gel of Brimonidine tartarate (BT), anti-glaucoma agent using Ion activated polymer; Gelrite as gelling agent, kappa carrageenan as mucoadhesive agent and Hydroxy Propyl Methyl Cellulose (HPMC E50) as release retardant polymer. The 23 factorial design was employed to optimize the formulation considering concentration of Gelrite, kappa carrageenan and Hydroxy Propyl Methyl Cellulose as independent variables, mucoadhesive force (N). Viscosity (cP) and In-vitro percentage drug release as dependent variables. Based on mucoadhesive force (N), Viscosity(CPS) and In-vitro percentage drug release, formulation containing concentration Gelrite (0.39%), kappa carrageenan (0.21%) and HPMC E50 (0.4%) was found to be optimized formulation developed by23 factorial design. Formulation was prepared successfully and assessed for gelling capacity, pH, rheological studies,refractive index, optical clarity, isotonicity and as ocular irriation by hen’s egg chorioallantoic membrane (HET-CAM) Test. The overall results of this study revealed that the Brimonidine tartarate/kappa carrageenan in-situ system can be used to enhance ocular retention time.

scholarly journals Formulation and characterization of a novel pH-triggered in-situ gelling ocular system containing Gatifloxacin

1970 ◽  
Vol 1 (3) ◽  
pp. 43-49 ◽  
Author(s):  
Jovita Kanoujia ◽  
Kanchan Sonker ◽  
Manisha Pandey ◽  
Koshy M Kymonil ◽  
Shubhini A Saraf
Keyword(s):  
Drug Release ◽  
Research Work ◽  
Gelling Agent ◽  
In Vitro Drug Release ◽  
Drug Content ◽  
Carbopol 940 ◽  
In Situ Gelling ◽  
Gel Transition

The present research work deals with the formulation and evaluation of in-situ gelling system based on sol-to-gel transition for ophthalmic delivery of an antibacterial agent gatifloxacin, to overcome the problems of poor bioavailability and therapeutic response exhibited by conventional formulations based a sol-to-gel transition in the cul-de-sac upon instillation. Carbopol 940 was used as the gelling agent in combination with HPMC and HPMC K15M which acted as a viscosity enhancing agent. The prepared formulations were evaluated for pH, clarity, drug content, gelling capacity, bioadhesive strength and in-vitro drug release. In-vitro drug release data of optimized formulation (F12) was treated according to Zero, First, Korsmeyer Peppas and Higuchi kinetics to access the mechanism of drug release. The clarity, pH, viscosity and drug content of the developed formulations were found in range 6.0-6.8, 10-570cps, 82-98% respectively. The gel provided sustained drug release over an 8 hour period. The developed formulation can be used as an in-situ gelling vehicle to enhance ocular bioavailability and the reduction in the frequency of instillation thereby resulting in better patient compliance. Key Words: In-situ gelation; Gatifloxacin; Carbopol 940; HPMC K15M. DOI: http://dx.doi.org/10.3329/icpj.v1i3.9661 International Current Pharmaceutical Journal 2012, 1(3): 43-49

scholarly journals Emulsion of Chloramphenicol: an Overwhelming Approach for Ocular Delivery

Folia Medica ◽  
2017 ◽  
Vol 59 (1) ◽  
pp. 23-30 ◽  
Author(s):  
Kalpesh C. Ashara ◽  
Ketan V. Shah
Keyword(s):  
Ternary Phase Diagram ◽  
Ex Vivo ◽  
Sterility Testing ◽  
Ocular Irritation ◽  
Peg 400 ◽  
Significant Difference ◽  
Oil Mixtures ◽  
Student’S T ◽  
The Impact

Abstract Background: Ophthalmic formulations of chloramphenicol have poor bioavailability of chloramphenicol in the ocular cavity. Aim: The present study aimed at exploring the impact of different oil mixtures in the form of emulsion on the permeability of chloramphenicol after ocular application. Materials and methods: Selection of oil mixture and ratio of the components was made by an equilibrium solubility method. An emulsifier was chosen according to its emulsification properties. A constrained simplex centroid design was used for the assessment of the emulsion development. Emulsions were evaluated for physicochemical properties; zone of inhibition, in-vitro diffusion and ex-vivo local accumulation of chloramphenicol. Validation of the design using check-point batch and reduced polynomial equations were also developed. Optimization of the emulsion was developed by software Design® expert 6.0.8. Assessment of the osmolarity, ocular irritation, sterility testing and isotonicity of optimized batch were also made. Results: Parker Neem®, olive and peppermint oils were selected as an oil phase in the ratio 63.64:20.2:16.16. PEG-400 was selected as an emulsifier according to a pseudo-ternary phase diagram. Constrained simplex-centroid design was applied in the range of 25-39% water, 55-69% PEG-400, 5-19% optimized oil mixture, and 1% chloramphenicol. Unpaired Student’s t-test showed for in-vitro and ex-vivo studies that there was a significant difference between the optimized batch of emulsion and Chloramphenicol eye caps (a commercial product) according to both were equally safe. Conclusion: The optimized batch of an emulsion of chloramphenicol was found to be as safe as and more effective than Chloramphenicol eye caps.

DEVELOPMENT AND EVALUATION OF NANOPARTICULATE BASED IN-SITU GELLING SYSTEM FOR NASAL DRUG DELIVERY OF AN ANTI-EPILEPTIC DRUG

INDIAN DRUGS ◽  
2017 ◽  
Vol 54 (09) ◽  
pp. 83-85
Author(s):  
A Ambavkar ◽  
◽  
N. Desai
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Entrapment Efficiency ◽  
Poloxamer 407 ◽  
Nasal Drug Delivery ◽  
Anti Epileptic Drug ◽  
Nanolipid Carriers ◽  
In Situ Nasal Gel

The objective of the study was to develop and evaluate nanolipid carriers based in situ gel of Carbamazepine, for brain delivery through intranasal route. The non – invasive nasal route can provide rapid delivery of drugs directly to the central nervous system by bypassing the blood brain barrier. The nanolipid carriers of carbamazepine as in situ nasal gel can prolong the drug release for control of repetitive seizures and were prepared by Phase Inversion Temperature technique. The retention of the carriers in the nasal cavity was improved by using Poloxamer 407 as thermoresponsive and Carbopol 974P as mucoadhesive gelling polymers, respectively. The developed gel was evaluated for particle size, polydispersity index, zeta potential, morphology, entrapment efficiency, mucoadhesive and thermoresponsive behaviour, in vitro drug release, ex vivo permeation and nasociliotoxicity. The gel showed sustained release over prolonged periods and was found to be non-toxic to the sheep nasal mucosa.

scholarly journals 5-Fluorouracil Release from Chitosan-Based Matrix.Experimental and Theoretical Aspects

2020 ◽  
Vol 57 (3) ◽  
pp. 180-188
Author(s):  
Roxana Iancu ◽  
Stefan Andrei Irimiciuc ◽  
Maricel Agop ◽  
Mihail Frasila ◽  
Maria-Alexandra Paun ◽  
...  
Keyword(s):  
Drug Release ◽  
Polarized Light ◽  
Crosslinking Density ◽  
Fickian Diffusion ◽  
Release Mechanism ◽  
Morphological Aspects ◽  
Drug Release Mechanism ◽  
The Matrix

A series of four drug release formulations based on 5-fluorouracil encapsulated into a chitosan-based matrix were prepared by in situ hydrogelation with 3,7-dimethyl-2,6-octadienal. The formulations were investigated from structural and morphological aspects by FTIR spectroscopy, polarized light microscopy and scanning electron microscopy. It was established that 5-fluorouracil was anchored into the matrix as crystals, whose dimension varied as a function of the crosslinking density. The in vitro drug release simulated into a media mimicking the physiological environment revealed a progressive release of the 5-fluorouracil, in close interdependence with the crosslinking density. In the context of Pharmacokinetics behavioral analysis, a new mathematical procedure for describing drug release dynamics in polymer-drug complex system is proposed. Assuming that the dynamics of polymer-drug system�s structural units take place on continuous and nondifferentiable curves (multifractal curves), we show that in a one-dimensional hydrodynamic formalism of multifractal variables the drug release mechanism (Fickian diffusion, non-Fickian diffusion, etc) are given through synchronous dynamics at a differentiable and non-differentiable scale resolutions. Finally, the model is confirmed by the empirical data.

Fabrication and Characterization of Ocular Phase Transition Systems for Blepharitis: A Novel Approach

2020 ◽  
Vol 10 (1) ◽  
pp. 24-37
Author(s):  
Deepali Verma ◽  
Shreya Kaul ◽  
Neha Jain ◽  
Upendra Nagaich
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Eye Drops ◽  
Stability Studies ◽  
In Vitro Drug Release ◽  
In Situ Gel ◽  
Drug Content ◽  
Erythromycin Estolate

Introduction: In the present research, erythromycin estolate loaded in-situ gel was formulated and evaluated for blepharitis in order to improve its therapeutic efficacy, precorneal residence time of the system and to enhance the ocular bioavailability. Material and Methods: The developed formulation was characterized by several parameters viz. FTIR, clarity, pH, gelation temperature, rheological studies, drug content, in vitro drug release studies, transcorneal permeation studies, bioadhesion studies, isotonicity and stability studies. Results: The optimized formulation exhibited non-fickian release diffusion with a sustained release of drug 82.76 ± 0.94% up to 8h and drug content 93.64%. Isotonicity revealed that the formulation was isotonic in nature and there was no shrinkage and busting of cells. Bioadhesion study was performed to check the adherence of the prepared in situ gel to the corneal surface for 4h. Ex vivo transcorneal permeation was observed to be significantly higher when compared with market eye drops. Histopathological studies were conducted to confirm the presence of normal ocular surface tissues by maintaining their morphological structures without causing damage to the tissues. The formulation was nonirritant as confirmed by the HET-CAM test. Stability studies and accelerated stability studies were conducted for 13 weeks and 26 weeks respectively and formulations were analyzed for the visual appearance, pH, viscosity, gelling capacity, drug content and in vitro drug release and results showed no change in the formulations. Conclusion: The formulation was therapeutically efficacious, sterile, stable and provided controlled release over a period of time. The developed system could be a viable alternative to conventional eye drops for treatment of various ocular diseases.

In vitro and In vivo Characterization of Pectin Based In situ Gelling System of Famotidine

2013 ◽  
Vol 5 (4) ◽  
pp. 1885-1894
Author(s):  
Mohmadmoin K. Modasiya ◽  
A K Patel ◽  
V.M Patel ◽  
G.C Patel
Keyword(s):  
Drug Release ◽  
Calcium Chloride ◽  
Fickian Diffusion ◽  
Similarity Factor ◽  
Drug Content ◽  
Model Drug ◽  
In Situ Gelling

In this study famotidine was used as a model drug to formulate and evaluate pH-induced in situ gelling system for oral sustained release drug delivery in stomach which has shorter biological half-life. To study the effect of independent variables 32 full factorial design was employed, concentration of pectin as pH dependant polymer and concentration of calcium chloride on dependent variables like viscosity, drug content, 50% and 80% drug release and similarity factor. It was found that both the concentration of pectin and concentration of calcium chloride had significant effect on viscosity, drug content, 50% and 80% drug release and similarity factor of the system. In vitro drug release study showed that drug released from the in situ gel followed non-Fickian diffusion. Mathematical modeling was employed for quantitative evaluation of the effect of formulation variables. Rat pylorus legation model was used for in vivo study of the selected formulation. Results shows gel formation in gastric juice and reduction in ulcer index. There were few or no major changes in the formulation during three months stability testing. The in situ gelling systems are useful for delivery of famotidine.

Long-lasting in situ forming Implant loaded with Bupivacaine: Investigation on the Polymeric and Non-polymeric Carrier and Solvent Effect

2021 ◽  
Vol 18 ◽  
Author(s):  
Saeed Bazraee ◽  
Hamid Mobedi ◽  
Arezuo Mashak ◽  
Ahmad Jamshidi
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Fickian Diffusion ◽  
Morphological Properties ◽  
Burst Release ◽  
Solvent Concentration ◽  
Drug Release Profile ◽  
In Situ Forming

Introduction: Typically, in situ forming implants utilize Poly (lactide-co-glycolide) (PLGA) as a carrier and N-methyl-2-pyrrolidone (NMP) as a solvent. However, it is essential to develop different carriers to release various drugs in a controlled and sustained manner with economic and safety considerations. Objective: The present study aims to evaluate the in-vitro release of Bupivacaine HCl from in situ forming systems as post-operative local anesthesia. Methods: We used Sucrose acetate isobutyrate (SAIB), PLGA 50:50, and a mixture of them as carriers to compare the release behavior. Besides, the effect of PLGA molecular weight (RG 502H, RG 503H, and RG 504H), solvent type, and solvent concentration on the drug release profile was evaluated. The formulations were characterized by investigating their in-vitro drug release, rheological properties, solubility, and DSC, in addition to their morphological properties. Furthermore, the Korsmeyer-Peppas and Weibull models were applied to the experimental data. The results revealed that a mixture of SAIB and PLGA compared to using them solely can extend the Bupivacaine HCl release from 3 days to two weeks. Results: The DSC results demonstrated the compatibility of the mixture by showing a single Tg. The formulation with NMP had a higher burst release and final release in comparison with other solvents by 30% and 96%, respectively. Increasing the solvent concentration from 12% to 32% raised the drug release significantly, which confirmed the larger porosity in the morphology results. From the Korsmeyer-Peppas model, the mechanism of drug release is predicted to be non-Fickian diffusion.

scholarly journals Formulation and Evaluation of Floating Oral In Situ Gelling System of Amoxicillin

2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Dasharath M. Patel ◽  
Divyesh K. Patel ◽  
Chhagan N. Patel
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Methyl Cellulose ◽  
Lag Time ◽  
Solution Viscosity ◽  
High Dose ◽  
In Situ Gelling

Purpose. Effective Helicobacter pylori eradication requires delivery of the antibiotic locally in the stomach. High dose of amoxicillin (750 to 1000 mg) is difficult to incorporate in floating tablets but can easily be given in liquid dosage form. Keeping the above facts in mind, we made an attempt to develop a new floating in situ gelling system of amoxicillin with increased residence time using sodium alginate as gelling polymer to eradicate H. pylori. Methods. Floating in situ gelling formulations were prepared using sodium alginate, calcium chloride, sodium citrate, hydroxypropyl methyl cellulose K100, and sodium bicarbonate. The prepared formulations were evaluated for solution viscosity, floating lag time, total floating time, and in vitro drug release. The formulation was optimized using a 32 full factorial design. Dissolution data were fitted to various models to ascertain kinetic of drug release. Regression analysis and analysis of variance were performed for dependent variables. Results. All formulations (F1–F9) showed floating within 30 s and had total floating time of more than 24 h. All the formulations showed good pourability. It was observed that concentration of sodium alginate and HPMC K100 had significant influence on floating lag time, cumulative percentage drug release in 6 h and 10 h. The batch F8 was considered optimum since it showed more similarity in drug release () to the theoretical release profile. Conclusion. Floating in situ gelling system of amoxicillin can be formulated using sodium alginate as a gelling polymer to sustain the drug release for 10 to 12 h with zero-order release kinetics.

Sign in / Sign up

Export Citation Format

Share Document