Recent advances and prospects of catalytic advanced oxidation process in treating textile effluents

2016 ◽  
Vol 32 (1) ◽  
pp. 1-47 ◽  
Author(s):  
Archina Buthiyappan ◽  
Abdul Raman Abdul Aziz ◽  
Wan Mohd Ashri Wan Daud

AbstractIn the past few years, there have been many researches on the use of different types of homogenous catalyst for the degradation of textile wastewater in conventional advanced oxidation processes (AOPs). However, homogenous AOPs suffer from few limitations, including large consumption of chemicals, acidic pH, high cost of hydrogen peroxide, generation of iron sludge, and necessity of post-treatment. Therefore, recently, there have been more researches that focus on improving the performance of conventional AOPs using heterogeneous catalysts such as titanium dioxide, nanomaterials, metal oxides, zeolite, hematite, goethite, magnetite, and activated carbon (AC). Besides, different supports such as AC that have been incorporated with transition metals and clays have been proven to have excellent catalytic activity in AOPs. This paper presents a comprehensive review of advances and prospects of catalytic AOPs for the decontamination of a wide range of synthetic and real textile wastewater. This review provides an up-to-date critical review of the information on the degradation of various textile dyes by a wide range of heterogeneous catalysts and adsorbents. The future challenges of AOPs, including chemical consumption, toxicity assessment, reactor design, and limitation of catalysts, are discussed in this paper. In addition, this paper also discusses the presence of ions, generation of by-products, and industrial applications of AOPs. Special emphasis is given to recent studies and large-scale combination of AOPs for wastewater treatment. This review paper concludes that more studies are needed for the kinetics, reactor design, and modeling of hybrid AOPs and the production of their corresponding intermediate products and secondary pollutants. A better economic model should also be developed to predict the cost of AOPs, as the treatment cost varies with dyes and textile effluents.

2013 ◽  
Vol 2013 ◽  
pp. 1-14 ◽  
Author(s):  
Chuan Wang ◽  
Hong Liu ◽  
Yanzhen Qu

Recent years have witnessed a rapid accumulation of investigations on TiO2-based photocatalysis, which poses as a greatly promising advanced oxidation technology for water purification. As the ability of this advanced oxidation process is well demonstrated in lab and pilot scales to decompose numerous recalcitrant organic compounds and microorganism as well in water, further overpass of the hurdles that stand before the real application has become increasingly important. This review focuses on the fundamentals that govern the actual water purification process, including the fabrication of engineered TiO2-based photocatalysts, process optimization, reactor design, and economic consideration. The state of the art of photocatalyst preparation, strategies for process optimization, and reactor design determines the enhanced separation of photo-excited electron-hole (e-h) pairs on the TiO2surface. For the process optimization, the kinetic analysis including the rate-determining steps is in need. For large-scale application of the TiO2-based photocatalysis, economics is vital to balance the fundamentals and the applied factors. The fundamentals in this review are addressed from the perspective of a bridge to the real applications. This review would bring valuably alternative paradigm to the scientists and engineers for their associated research and development activities with an attempt to push the TiO2-based photocatalysis towards industrially feasible applications.


2015 ◽  
Vol 15 (1) ◽  
pp. 35-39 ◽  
Author(s):  
Andris Bojarevičs ◽  
Toms Beinerts ◽  
Mārtiņš Sarma ◽  
Yurii Gelfgat

AbstractMultiple configurations of synchronously rotating permanent magnet cylinders magnetized across the axes are proposed for liquid metal stirring for homogenization as well as for pumping. Universal analytical model is used for an initial parameter analysis. Then experimental setups were built to perform physical modelling of the industrial applications, e.g. large-scale metallurgical furnaces. Velocity distribution in the liquid metal was measured using different methods: the Ultrasound Doppler anemometry and the potential difference probes. The study shows that the cylindrical permanent magnet setups can achieve up to 10 times higher energy efficiency compared to AC inductors and have potential of wide-range industrial application, e.g. can be used as stirrers for secondary aluminium furnaces with up to 50 cm thick walls.


Author(s):  
André F. Rossi ◽  
Rui C. Martins ◽  
Rosa M. Quinta-Ferreira

AbstractFenton’s reaction is an advanced oxidation process where, classically, hydrogen peroxide is the oxidizing agent and an iron catalyst promotes the formation of hydroxyl radicals (•OH). Among the studies that evaluated different metals as Fenton-like catalysts, our group of investigation has recently used cerium-based solids as heterogeneous catalysts in slurry reaction and, in this work, iron sludge coming from an industrial Fenton’s reactor used for the wastewater depuration of a detergent production factory is being appraised while treating a synthetic effluent containing 0.1 g.L


2020 ◽  
Vol 28 (1) ◽  
pp. 9-17 ◽  
Author(s):  
S. I. Tsekhmistrenko ◽  
V. S. Bityutskyy ◽  
O. S. Tsekhmistrenko ◽  
L. P. Horalskyi ◽  
N. O. Tymoshok ◽  
...  

In recent decades, the attention of scientists has been drawn towards nanoparticles (NPs) of metals and metalloids. Traditional methods for the manufacturing of NPs are now being extensively studied. However, disadvantages such as the use of toxic agents and high energy consumption associated with chemical and physical processes impede their continued use in various fields. In this article, we analyse the relevance of the use of living systems and their components for the development of "green" synthesis of nano-objects with exceptional properties and a wide range of applications. The use of nano-biotechnological methods for the synthesis of nanoparticles has the potential of large-scale application and high commercial potential. Bacteria are an extremely convenient target for green nanoparticle synthesis due to their variety and ability to adapt to different environmental conditions. Synthesis of nanoparticles by microorganisms can occur both intracellularly and extracellularly. It is known that individual bacteria are able to bind and concentrate dissolved metal ions and metalloids, thereby detoxifying their environment. There are various bacteria cellular components such as enzymes, proteins, peptides, pigments, which are involved in the formation of nanoparticles. Bio-intensive manufacturing of NPs is environmentally friendly and inexpensive and requires low energy consumption. Some biosynthetic NPs are used as heterogeneous catalysts for environmental restoration, exhibiting higher catalytic efficiency due to their stability and increased biocompatibility. Bacteria used as nanofactories can provide a new approach to the removal of metal or metalloid ions and the production of materials with unique properties. Although a wide range of NPs have been biosynthetic and their synthetic mechanisms have been proposed, some of these mechanisms are not known in detail. This review focuses on the synthesis and catalytic applications of NPs obtained using bacteria. Known mechanisms of bioreduction and prospects for the development of NPs for catalytic applications are discussed.


2021 ◽  
Author(s):  
Sutrisno Salomo Hutagalung ◽  
Deddy Kurniadi ◽  
Nurul Taufiqu Rochman ◽  
Sri Harjati Suhardi ◽  
Khusnul Khotimah

Author(s):  
Olga A. Abramova ◽  
Yulia A. Itkulova ◽  
Nail A. Gumerov

Modeling of motion of two-phase liquids in microchannels of different shape is needed for a variety of industrial applications, such as enhanced oil recovery, advanced material processing, and biotechnology. Development of efficient computational techniques is required for understanding the mechanisms of many effects in “liquid-liquid” systems, such as the jamming of emulsion flows in microchannels and blood cell motion in capillaries. In the present study, a mathematical model of a three-dimensional flow of a mixture of two Newtonian liquids of a droplet structure in microchannels at low Reynold’s numbers is considered. The computational approach is based on the boundary element method accelerated both via an advanced scalable algorithm (FMM), and via utilization of a heterogeneous computing architecture (multicore CPUs and graphics processors). To solve large scale problems flexible GMRES solver is developed. Example computations are conducted for dynamics of many deformable drops of different sizes in microchannels. The results of simulations and accuracy/performance of the method are discussed. The developed approach can be used for solution of a wide range of problems related to emulsion flows in micro- and nanoscales.


Sign in / Sign up

Export Citation Format

Share Document