Synthesis and properties of new polyamide-organoclay nanocomposites containing pyrazine moiety in the main chain

2012 ◽  
Vol 19 (3) ◽  
pp. 215-220
Author(s):  
Khalil Faghihi ◽  
Mohammad Naderi-Ghomi ◽  
Mohsen Hajibeygi
Keyword(s):  
Main Chain ◽  
Nanocomposite Films ◽  
Triphenyl Phosphite ◽  
Direct Polycondensation ◽  
Polycondensation Reaction ◽  
X Ray Diffraction ◽  
Solution Intercalation ◽  
X Ray ◽  
Diaminodiphenyl Sulfone ◽  
Thermal Stability Of

AbstractA series of polyamide (PA)/montmorillonite nanocomposites containing pyrazine moiety in the main chain were synthesized by a convenient solution intercalation technique. PA 3 as a source of polymer matrix was synthesized by the direct polycondensation reaction of pyrazine-2,3-dicarboxylic acid 1 with 4,4′-diaminodiphenyl sulfone 2 in the presence of triphenyl phosphite, CaCl2, pyridine, and N-methyl-2-pyrrolidone. The resulting nanocomposite films were characterized by Fourier transform infrared spectra, X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis (TGA). The results showed that organo-modified clay was dispersed homogeneously in the PA matrix. TGA indicated an enhancement of thermal stability of new nanocomposites compared with the pure polymer.

scholarly journals Thermal and optical properties of new poly(amide-imide)-nanocomposite reinforced by layer silicate based on chiral n-trimellitylimido-L-valine

2012 ◽  
Vol 31 (1) ◽  
pp. 79
Author(s):  
Khalil Faghihi ◽  
Masoumeh Soleimani ◽  
Shabnam Nezami ◽  
Meisam Shabanian
Keyword(s):  
Main Chain ◽  
Nanocomposite Films ◽  
Direct Polycondensation ◽  
Polycondensation Reaction ◽  
X Ray Diffraction ◽  
Solution Intercalation ◽  
X Ray ◽  
Vis Spectroscopy ◽  
Polymeric Chains ◽  
Morphology And Structure

Two new samples of poly(amide-imide)-montmorillonite reinforced nanocomposites containing N-trimellitylimido-L-valine moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide-imide) (PAI) 5 as a source of polymer matrix was synthesized by the direct polycondensation reaction of N-trimellitylimido-L-valine (3) with 4,4′-diaminodiphenyl ether 4 in the presence of triphenyl phosphite (TPP), CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP). Morphology and structure of the resulting PA-nanocomposite films (5a) and (5b) with 10 and 20 % silicate particles were characterized by FTIR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposite films were investigated by using Uv-vis spectroscopy,  thermogravimetric analysis (TGA) and water uptake measurements.

New thermally stable poly(amide-imide)/montmorillonite reinforced nanocomposite based on N,N′-pyrromellitoyl-bis-l-valine: synthesis and characterization

2014 ◽  
Vol 21 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Khalil Faghihi ◽  
Narges Dehnavi ◽  
Mohsen Hajibeygi
Keyword(s):  
Main Chain ◽  
Diphenyl Ether ◽  
Nanocomposite Films ◽  
X Ray Diffraction ◽  
Visible Spectroscopy ◽  
Scanning Calorimetry ◽  
Solution Intercalation ◽  
X Ray ◽  
Polymeric Chains ◽  
Uv Visible

AbstractTwo new samples of poly(amide-imide) (PAI)/nanocomposites reinforced montmorillonite containing N,N′-pyrromelitoyl-bis-l-valine moiety in the main chain were synthesized by a solution intercalation technique. PAI 3 as a source of polymer matrix was synthesized by the direct polycondensation reaction of N,N′-pyrromelitoyl-bis-l-valine 1 with 4,4′-diamino diphenyl ether 2 in the presence of triphenyl phosphite, CaCl2, pyridine and N-methyl-2-pyrrolidone. The morphology and structure of the resulting PAI-nanocomposite films 4a and 4b with 5% and 10% silicate particles were characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy. The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposites films were investigated by using UV-visible spectroscopy, thermogravimetric analysis and differential scanning calorimetry.

scholarly journals Thermal and electrical properties of polyimide/PANI nanofiber composites prepared via in situ polymerization

2018 ◽  
Vol 36 (2) ◽  
pp. 283-287
Author(s):  
Aseel A. Kareem
Keyword(s):  
In Situ Polymerization ◽  
Composite Films ◽  
Nanocomposite Films ◽  
X Ray Diffraction ◽  
Nanofiber Composite ◽  
X Ray ◽  
Thermal And Electrical Properties ◽  
Ft Ir ◽  
Thermal Stability Of

Abstract Polyimide/polyaniline nanofiber composites were prepared by in situ polymerization with various weight percentages of polyaniline (PANI) nanofibers. X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR), proved the successful preparation of PANI nanofiber composite films. In addition, thermal stability of PI/PANI nanofiber composites was superior relative to PI, having 10 % gravimetric loss in the range of 623 °C to 671 °C and glass transition temperature of 289 °C to 297 °C. Furthermore, the values of the loss tangent tanδ and AC conductivity σAC of the nanocomposite films were notably higher than those of pure polyimide. The addition of 5 wt.% to 15 wt.% PANI nanofiber filler enhanced the activation energy of PI composites from 0.37 eV to 0.34 eV.

scholarly journals Synthesis and Characterization of New Polyimide/Organoclay Nanocomposites Containing Benzophenone Moieties in the Main Chain

2017 ◽  
Vol 57 (2) ◽  
Author(s):  
Khalil Faghihi ◽  
Mostafa Ashouri ◽  
Akram Feyzi
Keyword(s):  
Main Chain ◽  
In Situ Polymerization ◽  
Clay Content ◽  
Nanocomposite Films ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ft Ir ◽  
Ft Ir Spectroscopy

<p>A series of nanocomposites consist of organic polyimide and organo-modified clay content varying from 0 to 5 wt%, were successfully prepared by in situ polymerization. Polyimide used as a matrix of nanocomposite was prepared through the reaction of 1,4-bis [4-aminophenoxy] butane (APB) and 3،3΄،4،4΄-benzophenone tetra carboxylic dianhydride (BTDA) in N,N-dimethylacetamide (DMAc). The resulting nanocomposite films were characterized by FT-IR spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA).</p>

Synthesis and Characterization of TiO2Nanoparticles with Polycarbonate and Investigation of its Mechanical Properties

2017 ◽  
Vol 16 (05n06) ◽  
pp. 1750012 ◽  
Author(s):  
Farhad Jahantigh ◽  
Mehdi Nazirzadeh
Keyword(s):  
Mechanical Properties ◽  
Weight Fraction ◽  
Xrd Analysis ◽  
Tensile Tests ◽  
Nanocomposite Films ◽  
Micro Hardness ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Stability Of

In this project, nanocomposite films were prepared with different Titanium dioxide (TiO2) percentages. Properties of polycarbonate (PC) and PC–TiO2nanocomposite films were studied by X-ray diffraction (XRD) analysis and Fourier transform infrared (FTIR) spectroscopy. The structure of samples was studied by XRD. The mechanical properties of PC–TiO2nanocomposite films were investigated by conducting tensile tests and hardness measurements. Thermal stability of the nanocomposites was studied by thermogravimetric analysis (TGA) method. The elastic modulus of the composite increased with increasing weight fraction of nanoparticles. The microhardness value increases with increasing TiO2nanoparticles. The results of tensile testing were in agreement with those of micro-hardness measurements. In addition, TGA curves showed that nanocomposite films have higher resistance to thermal degradation compared to polycarbonate. There are many reports related to the modification of polycarbonate films, but still a systematic study of them is required.

Preparation and characterization of poly(3-hydroxybutyrate)/ Cloisite25A nanocomposites

e-Polymers ◽  
2013 ◽  
Vol 13 (1) ◽  
Author(s):  
Matko Erceg ◽  
Dražan Jozić
Keyword(s):  
Crystallization Rate ◽  
Nucleating Agent ◽  
Degree Of Crystallinity ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Tg Analysis ◽  
Solution Intercalation ◽  
X Ray ◽  
Thermal Stability Of

Abstract Poly(3-hydroxybutyrate)/Cloisite25A (PHB/25A) nanocomposites were prepared by solution-intercalation method. The intercalation of PHB chains between the layers of Cloisite25A was observed by X-ray diffraction (XRD). Differential scanning calorimetry (DSC) and non-isothermal thermogravimetry (TG) analysis were performed to study the thermal properties, crystallization and the thermal degradation of the prepared nanocomposites. DSC analysis indicates that Cloisite25A acts as a nucleating agent and increases the crystallization rate of PHB, but due to intercalation reduces its overall degree of crystallinity. TG analysis shows that addition of Cloisite25A enhances the thermal stability of PHB.

Formation and Thermal Stability of Nd0.32Y0.68Si1.7 Layers Formed by Channeled Ion Beam Synthesis

1998 ◽  
Vol 514 ◽  
Author(s):  
M. F. Wu ◽  
A. Vantomne ◽  
S. Hogg ◽  
H. Pattyn ◽  
G. Langouche ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Ion Beam ◽  
Hexagonal Structure ◽  
Orthorhombic Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Good Crystalline Quality ◽  
Ion Beam Synthesis ◽  
Thermal Stability Of

ABSTRACTThe Nd-disilicide, which exists only in a tetragonal or an orthorhombic structure, cannot be grown epitaxially on a Si(111) substrate. However, by adding Y and using channeled ion beam synthesis, hexagonal Nd0.32Y0.68Si1.7 epilayers with lattice constant of aepi = 0.3915 nm and cepi = 0.4152 nm and with good crystalline quality (χmin of Nd and Y is 3.5% and 4.3 % respectively) are formed in a Si(111) substrate. This shows that the addition of Y to the Nd-Si system forces the latter into a hexagonal structure. The epilayer is stable up to 950 °C; annealing at 1000 °C results in partial transformation into other phases. The formation, the structure and the thermal stability of this ternary silicide have been studied using Rutherford backscattering/channeling, x-ray diffraction and transmission electron microscopy.

Study of Thermal Behaviour of EPDM/SBR Blends and Carbon Nanocoatings Deposited by Sputtering

2021 ◽  
Vol 875 ◽  
pp. 116-120
Author(s):  
Muhammad Alamgir ◽  
Faizan Ali Ghauri ◽  
Waheed Qamar Khan ◽  
Sajawal Rasheed ◽  
Muhammad Sarfraz Nawaz ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Weight Loss ◽  
Thermogravimetric Analysis ◽  
Thermal Behavior ◽  
Thermal Behaviour ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thermal Stability Of

In this study, the effect of SBR concentration (10 Phr, 20 Phr & 30 Phr ) on the thermal behavior of EPDM/SBR blends was studied. Thermogravimetric analysis (TGA) was used to check weight loss of samples as function of temperature by heating upto 600°C. X-ray diffraction (XRD) was performed to determine quality and % crystallinity of the elastomer blends. It was seen that % crystallinity improved with an increase in the content of SBR in EPDM/SBR blends. TGA revealed that the thermal stability of EPDM/SBR blends has improved by 17% than neat EPDM. Carbon nano-coatings produced by sputtering have no beneficial influence on thermal behaviour of elastomers.

Syntheses, Crystal Structures and Thermal Stability of Co(II) and Zn(II) Complexes with Ethyl Carbazate

2005 ◽  
Vol 60 (5) ◽  
pp. 505-510 ◽  
Author(s):  
Tong-Lai Zhang ◽  
Jiang-Chuang Song ◽  
Jian-Guo Zhang ◽  
Gui-Xia Ma ◽  
Kai-Bei Yu
Keyword(s):  
Thermal Stability ◽  
Aqueous Solutions ◽  
Diffraction Analysis ◽  
Single Crystals ◽  
Slow Evaporation ◽  
X Ray Diffraction ◽  
Element Analysis ◽  
Thermal Stabilities ◽  
X Ray ◽  
Thermal Stability Of

Cobalt(II) and zinc(II) complexes of ethyl carbazate (ECZ), [Co(ECZ)3](NO3)2 and [Zn(ECZ)3] (NO3)2, were synthesized. Single crystals of these two compounds were grown from aqueous solutions using a slow evaporation method. Their structures have been determined by X-ray diffraction analysis. Both of them are monoclinic with space group P21/n. The complexes are further characterized by element analysis and IR measurements. Their thermal stabilities are studied by using TG-DTG, DSC techniques. When heated to 350 °C, only metal oxide was left for both complexes.

Sign in / Sign up

Export Citation Format

Share Document