scholarly journals Effect of Er: YAG Laser on Microtensile Bond Strength of Bleached Dentin to Composite

2019 ◽  
Vol 10 (2) ◽  
pp. 117-124 ◽  
Author(s):  
Mohsen Rezaei ◽  
Elham Aliasghar ◽  
Mohammad Bagher Rezvani ◽  
Nasim Chiniforush ◽  
Zohreh Moradi
Keyword(s):  
Bond Strength ◽  
Tooth Bleaching ◽  
Sodium Ascorbate ◽  
Sodium Perborate ◽  
Microtensile Bond Strength ◽  
Human Teeth ◽  
Yag Laser ◽  
Tooth Structure ◽  
Significant Difference ◽  
Laser Bleaching

Introduction: In non-vital tooth bleaching, dentin is in direct contact with the bleaching agent, 1 to 3-week delay is needed to eliminate free radicals from tooth structure. The present study aimed to evaluate the effect of irradiation of Er: YAG laser on immediate microtensile bond strength of bleached dentin to composite. Methods: Sixty sounds human teeth were collected and randomly divided into 4 groups (n=15): no bleaching (NB), opalescence endo hydrogen peroxide (HP) gel bleaching, sodium perborate (SP) bleaching and laser bleaching with heydent gel (LB). The groups were divided into 3 subgroups (n=5): no surface treatment, Er: YAG laser irradiation and 10% sodium ascorbate (SA). All samples were restored and underwent microtensile bond strength testing. Statistical analysis was carried out using one-way and two-way ANOVA. Results: Bond strength in NB-SA group had a significant difference with the NB group (P<0.05) while no significant difference was noted between NB and NB-Er groups (P=0.55). Application of SA and Er: YAG laser after bleaching with SP did not enhance the bond strength (P=0.07). Conclusion: Application of SA and Er: YAG laser after HP gel bleaching significantly enhanced the bond strength. Application of Er: YAG laser after internal bleaching with HP gel could enhance the bond strength.

scholarly journals Improving shear bond strength of metallic brackets after whitening

2020 ◽  
Vol 25 (5) ◽  
pp. 38-43
Author(s):  
Juan Fernando Aristizábal ◽  
Angela Patricia Polanía González ◽  
James A. McNamara
Keyword(s):  
Hydrogen Peroxide ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Artificial Saliva ◽  
Tooth Bleaching ◽  
Sodium Ascorbate ◽  
Control Group ◽  
Antioxidant Treatment ◽  
Significance Level ◽  
Significant Difference

ABSTRACT Objective: To evaluate a protocol for bonding metallic brackets after bleaching with hydrogen peroxide (HP). Methods: 60 extracted maxillary premolar were randomly divided into an unbleached control group and two groups bleached with a solution of 35% hydrogen peroxide prior to bonding. The teeth in one of the treated groups were bonded immediately after bleaching; while the other group was treated with 10% sodium ascorbate immediately after bleaching and before bonding. The teeth in all groups were stored in an artificial saliva solution for 7 days after bonding. The shear bond strength data was measured in megapascals (MPa) and the fail attempts were verified. The significance level was established at p< 0.05. Results: The unbleached group, in which brackets were bonded to untreated enamel, had the highest bond strength values (11.0 ± 5.7MPa) in comparison to the bleached group (7.14 ± 40MPa), in which brackets were bonded to recently bleached enamel. Slightly improved bond strength was observed in the antioxidant group (8.13 ± 5.4MPa), in which the teeth were bleached and then the antioxidant was applied to the teeth before bonding. Unbleached and bleached groups showed statistically significant difference for shear bond strength (p=0.03) and load strength (p=0.03); no significant differences were noted between unbleached and antioxidant groups (p=0.52). Conclusion: The antioxidant treatment applied immediately after bleaching was effective in reversing the reduction in shear bond strength of brackets after tooth bleaching.

scholarly journals Time of Application of Sodium Ascorbate on Bonding to Bleached Dentin

Scanning ◽  
2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Kyoung-Hwa Jung ◽  
Eun-Mi Seon ◽  
An-Na Choi ◽  
Yong-Hoon Kwon ◽  
Sung-Ae Son ◽  
...  
Keyword(s):  
Bond Strength ◽  
Sodium Ascorbate ◽  
Control Group ◽  
Sodium Perborate ◽  
Microtensile Bond Strength ◽  
X Ray ◽  
Time Of Application ◽  
Group A ◽  
Group B ◽  
One Way Anova

This study examined the effects of different application times of sodium ascorbate (SA) on the bond strength of composite resin to bleached dentin. Specimens with an exposed dentin surface were divided into 3 groups according to the type of bleaching agent used: Group A, mixture of sodium perborate (SP) and distilled water (DW); Group B, mixture of SP and hydrogen peroxide (HP); control group, no bleaching. Each group was classified into 10 subgroups. Subgroups IB and DB underwent immediate bonding and delayed bonding, respectively. 10% SA was applied to 3, 5, 10, and 30 minutes and 1, 24, 48, and 72 hours, respectively. Microtensile bond strength (μTBS) was measured after restoration, and the data was analyzed by one-way ANOVA and Scheffé’s test. Before restoration, the dentin surfaces were examined by scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). SEM showed that most dentin surfaces were filled with crystals when SA was applied to more than 24 hours. EDS revealed peaks of calcium, carbon, oxygen, and sodium. The application of SA for 5 minutes to 48 hours or for 30 minutes to 24 hours is suggested when a mixture of SP and DW or HP is used, respectively.

scholarly journals Effect of Sodium Ascorbate on Dentin Bonding After Two Bleaching Techniques

2014 ◽  
Vol 39 (2) ◽  
pp. 195-203 ◽  
Author(s):  
ALF Briso ◽  
V Rahal ◽  
RH Sundfeld ◽  
PH dos Santos ◽  
RS Alexandre
Keyword(s):  
Hydrogen Peroxide ◽  
Bond Strength ◽  
Layer Thickness ◽  
Longitudinal Direction ◽  
Tooth Bleaching ◽  
Sodium Ascorbate ◽  
Carbamide Peroxide ◽  
Hybrid Layer ◽  
Microtensile Bond Strength ◽  
Systematic Sample

SUMMARY The purpose of this study was to analyze the influence of 10% sodium ascorbate (SA) on the hybrid layer, resin tag length, and bond strength to dentin after bleaching. Six groups were tested: G C, control; G SA, sodium ascorbate (SA) + restoration; G CP, bleaching with carbamide peroxide (CP) + restoration; G CP+SA, bleaching with CP + SA+ restoration; G HP, bleaching with 35% hydrogen peroxide (HP) + restoration; and G HP+SA, HP + SA + restoration. After dental bleaching, the dentin was exposed and the antioxidant solution was applied to groups G SA, G CP+SA, and G HP+SA, before bonding procedures. The teeth were sectioned in the mesiodistal direction. One section was decalcified, and the specimens were embedded in paraffin and sectioned in the longitudinal direction with a thickness of 6 μm. Fifteen slices of each specimen were selected according to a systematic sample of slices with an interval proportional to the total number of slices obtained for each tooth. The specimens were stained using the Brown & Brenn method, and an optic microscope was used to analyze the hybrid layer thickness and resin tag length. The remaining tooth segment was sectioned into stick-shaped specimens and used for microtensile bond strength testing (0.5 mm/min). Statistical analysis was performed using two-way analysis of variance and Fisher test. The results for hybrid layer + tag formation (in micrometers) were G C, 13.27 Aa; G SA, 11.85 Ba; G CP, 6.84 Bb; G CP+SA, 9.02 Ab; G HP, 7.28 Bb; and G HP+SA, 9.22 Ab; bond strength results (in MPa) were G C, 49.5 Aa; G SA, 51.7 Aa; G CP, 37.16 Bb; G CP+SA, 47.69 Aa; G HP, 32.39 Ab; and G HP+SA, 39.67 Ab. Tooth bleaching with CP or HP impairs the formation of the hybrid layer and resin tags and reduces the microtensile bond strength. Statistically, the use of SA significantly increases the hybrid layer thickness and resin tag length. The microtensile bond strength values for carbamide peroxide increased, but the microtensile bond strength for hydrogen peroxide was not affected.

scholarly journals Evaluation of shear bond strength of orthodontic brackets bonded on the tooth surface after internal bleaching

2014 ◽  
Vol 43 (3) ◽  
pp. 209-213
Author(s):  
Nadia de Souza FERREIRA ◽  
Patrícia Campos Ferreira da ROSA ◽  
Raffaela Di Iorio Jeronymo FERREIRA ◽  
Marcia Carneiro VALERA
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Orthodontic Brackets ◽  
Tooth Bleaching ◽  
Tooth Surface ◽  
Control Group ◽  
Sodium Perborate ◽  
Safe Procedure ◽  
Carbamide Peroxide ◽  
Significant Difference

Introduction: There is great demand for esthetic treatment by patients who have discolored teeth, because currently aesthetic standards have become stricter and many patients have tooth bleaching procedures performed before or during orthodontic treatment. Objective: To evaluate the bonding of orthodontic brackets to human molars after internal tooth bleaching. Material and method: Forty molars were divided into four groups according to the bleaching agent used: PS) sodium perborate + water; PC) carbamide peroxide; PC + PS) carbamide peroxide + sodium perborate; Cont) water (control group). Bleaching agents placed inside the pulp chambers were replaced every 7 days for 2 weeks, and the brackets were bonded 30 days after the end of bleaching. The shear strength test was performed in a universal testing machine (Emic). Result: ANOVA with a significance level of 5% (p > 0.05), showed no statistically significant difference between groups (p = 0.1214). Conclusion: It was concluded that the different bleaching agents studied did not interfere with the bond strength of brackets to enamel and bonding the brackets 30 days after internal bleaching is a safe procedure.

scholarly journals Comparative Evaluation of Immediate Bond Strength to Bleached Enamel Following Application of Various Antioxidant Solutions

2017 ◽  
Vol 05 (02) ◽  
pp. 084-089
Author(s):  
Alisha Dhingra ◽  
Ashu Gupta ◽  
Anshu Minocha ◽  
Nayantara Sen
Keyword(s):  
Bond Strength ◽  
Shear Bond Strength ◽  
Grape Seed Extract ◽  
Grape Seed ◽  
Seed Extract ◽  
The Other ◽  
Sodium Ascorbate ◽  
Group V ◽  
Group I ◽  
Significant Difference

Abstract Aim: The aim of this study was to compare the reversal of shear bond strength of composite to bleached enamel immediately after bleaching followed by application of various antioxidant solutions. Material and Methods: Seventy central incisors were divided into seven groups. Groups I and II served as unbleached and bleached controls respectively. Groups III, IV, V, VI and VII served as the experimental groups and were subjected to 37.5% hydrogen peroxide bleaching followed by 10 min application of 10% sodium ascorbate, 25% alpha-tocopherol, 6.5% grape seed extract, 5% lycopene and 5% green tea extract respectively. Following composite bonding, shear bond strength was determined and the results were analyzed using ANOVA followed by Post Hoc Multiple Comparisons test. Results: The bond strength values for Group I (positive control) were maximum and significantly different than all the other groups except Grape seed extract group (Group V). When compared to Group II (bleached control), all the groups showed significantly higher bond strength. Significant difference in the bond strength values were seen between Group III (10% sodium ascorbate) and Group V. Also values for Group V were significantly different from Group VI (5% lycopene). All the other values showed insignificantly different results. Conclusion: All the antioxidant solutions improved the shear bond strength values after bleaching but only Grape seed extract application reversed the values to the non bleached levels. Lycopene was least effective. Other antioxidants showed comparable results.

scholarly journals Influence of Water Aging on Microtensile Bond Strength of a Flowable and a Packable Bulk-fill Resin Composites to Dentin

2020 ◽  
Vol 8 (D) ◽  
pp. 112-117
Author(s):  
Ayah Atif Selim ◽  
Ahmed Fawzy Abo Elezz ◽  
Rehab Khalil Safy
Keyword(s):  
Bond Strength ◽  
Storage Time ◽  
Resin Composite ◽  
Water Storage ◽  
Aging Effect ◽  
Mean Value ◽  
Control Group ◽  
Microtensile Bond Strength ◽  
Significant Difference ◽  
Influence Of Water

AIM: Investigation of the aging effect on the microtensile bond strength (μTBS) of bulk-fill resin composite (RC) versus a conventionally incrementally applied one. MATERIALS AND METHODS: A total number of 45 sound human impacted third molars extracted molars have been selected to prepare specimens for the μTBS test. Teeth were randomly divided into three groups (C) according to type of RC material which used for restoring the teeth. Where nanohybrid RC (Grandio®SO) was used as the control Group (C1), packable bulk-fill RC (X-tra fil®) was used for restoring teeth in C2 group and flowable bulk-fill RC (X-tra base®) was used for restoring teeth in C3 group. Each group was further subdivided into 3 subgroups (n = 5) according to the water storage time, where in subgroup 1; teeth were stored for 24 h, subgroup 2; teeth were stored for 3 months while for subgroup 3; and teeth were stored for 6 months. After water storage, teeth were sectioned for preparation of μTBS testing beams. Maximum tensile stresses were recorded in megapascal (MPa). RESULTS: After 24 h of water storage, the X-tra base® showed a higher statistically significant μTBS to dentin (33.82 ± 9.84 MPa) than did the other two types of RCs. After 3 months, the X-tra fil® showed the lowest mean value of μTBS (10.90 ± 5.66 MPa), meanwhile, after 6 months of water storage Grandio®SO showed the highest mean value of μTBS (15.85 ± 6.76 MPa). Regardless of the time the X-tra fil® showed the lowest mean of μTBS (15.07 ± 11.73 MPa), while there is no significant difference between the X-tra base® and Grandio®SO. Furthermore, the water aging adversely affects μTBS values which deceased gradually by time. CONCLUSION: The packable bulk-fill RC characterized by lower μTBS to dentin in comparison to the flowable bulk fill and the incrementally applied nanohybrid RCs. Furthermore, the μTBS of the three tested materials decreased gradually by aging.

scholarly journals Microtensile Bond Strength of Methacrylate and Silorane Resins to Enamel and Dentin

2014 ◽  
Vol 25 (4) ◽  
pp. 327-331 ◽  
Author(s):  
Gisele Rodrigues da Silva ◽  
Isabela Sousa Araújo ◽  
Rodrigo Dantas Pereira ◽  
Bruno de Castro Ferreira Barreto ◽  
Célio Jesus do Prado ◽  
...  
Keyword(s):  
Bond Strength ◽  
Aging Time ◽  
Storage Time ◽  
Composite Resin ◽  
Glass Plate ◽  
Composite Resins ◽  
Microtensile Bond Strength ◽  
Bonding Interaction ◽  
Significant Difference ◽  
And Storage

The aim of this study was to evaluate the microtensile bond strength (µTBS) of two substrates (enamel and dentin) considering two study factors: type of composite resin [methacrylate-based (Filtek Supreme) or silorane-based (Filtek LS)] and aging time (24 h or 3 months). Twenty human molars were selected and divided into 2 groups (n=10) considering two dental substrates, enamel or dentin. The enamel and dentin of each tooth was divided into two halves separated by a glass plate. Each tooth was restored using both tested composite resins following the manufacturer's instructions. The samples were sectioned, producing 4 sticks for each composite resin. Half of them were tested after 24 h and half after 3 months. µTBS testing was carried out at 0.05 mm/s. Data were analyzed by three-way ANOVA and Tukey's HSD tests at α=0.05. Significant differences between composite resins and substrates were found (p<0.05), but no statistically significant difference was found for aging time and interactions among study factors. The methacrylate-based resin showed higher µTBS than the silorane-based resin. The µTBS for enamel was significantly higher than for dentin, irrespective of the composite resin and storage time. Three months of storage was not sufficient time to cause degradation of the bonding interaction of either of the composite resins to enamel and dentin.

scholarly journals Graphene oxide nano-filler based experimental dentine adhesive. A SEM / EDX, Micro-Raman and microtensile bond strength analysis

2020 ◽  
Vol 18 ◽  
pp. 228080002096693 ◽  
Author(s):  
Abdullah Alshahrani ◽  
Mohammed S Bin-Shuwaish ◽  
Rana S Al-Hamdan ◽  
Thamer Almohareb ◽  
Ahmed M Maawadh ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Bond Strength ◽  
Sem Analysis ◽  
Strength Analysis ◽  
Hybrid Layer ◽  
Microtensile Bond Strength ◽  
Significant Difference ◽  
Strength And Durability ◽  
And Control ◽  
Microraman Spectroscopy

Aim: The study aimed to assess graphene oxide (GO) adhesive and its dentin interaction using scanning electron microscopy (SEM), MicroRaman spectroscopy and Microtensile bond strength (μTBS). Materials and Methods: Experimental GOA and control adhesives (CA) were fabricated. Presence of GO within the experimental adhesive resin was assessed using SEM and Micro-Raman spectroscopy. Ninety specimens were prepared, sixty teeth were utilized for μTBS, twenty for SEM analysis of interface for CA and GOA and ten were assessed using microRaman spectroscopy. Each specimen was sectioned and exposed dentine was conditioned (35% phosphoric acid) for 10 s. The surface was coated twice with adhesive (15 s) and photopolymerized (20 s). Composite build-up on specimen was photo-polymerized. Among the bonded specimens, thirty specimen were assessed using Micro-Raman spectrometer, SEM and energy dispersive X-ray spectroscopy (EDX), whereas remaining specimens were divided in to three sub-groups ( n = 10) based on the storage of 24 h, 8 weeks and 16 weeks. μTBS testing was performed at a crosshead speed of 0.5 mm/min using a microtensile tester. The means of μ-tbs were analyzed using ANOVA and post hoc Tukey multiple comparisons test. Results: No significant difference in μTBS of CA and GOA was observed. Storage time presented a significant interaction on the μTBS ( p < 0.01). The highest and lowest μTBS was evident in CA (30.47 (3.55)) at 24 h and CA (22.88 (3.61)) at 18 weeks. Micro-Raman analysis identified peaks of 1200 cm-1 to 1800 cm1, D and G bands of GO nanoparticles in the resin. Uniform distribution of graphene oxide nanoparticles was present at the adhesive and hybrid layer. Conclusion: GO showed interaction within adhesive and tooth dentin similar to CA, along with formation of hybrid layer. In ideal conditions (absence of nanoleakage), graphene oxide modified adhesive shows comparable bond strength and durability of resin dentine bond.

scholarly journals Comparative evaluation of superoxide dismutase, alpha-tocopherol, and 10% sodium ascorbate on reversal of shear bond strength of bleached enamel: An in vitro study

2016 ◽  
Vol 10 (01) ◽  
pp. 109-115 ◽  
Author(s):  
Mahendran Kavitha ◽  
Sharmila Selvaraj ◽  
Ambica Khetarpal ◽  
Aruna Raj ◽  
Shakunthala Pasupathy ◽  
...  
Keyword(s):  
Superoxide Dismutase ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Testing Machine ◽  
Alpha Tocopherol ◽  
Sodium Ascorbate ◽  
Control Group ◽  
Group I ◽  
Antioxidant Agents ◽  
Significant Difference

ABSTRACT Objective: The aim of this study was to investigate the neutralizer effect of antioxidant agents on the bond strength of bleached enamel. Materials and Methods: Sixty enamel slabs were prepared from 60 freshly extracted maxillary central incisors and were divided into six groups. The negative control group received no bleaching treatment and the other groups were bleached with 35% carbamide peroxide (Opalescence Quick; Ultradent, South Jordan, USA). In Group II, composite was built immediately after bleaching and cured without any antioxidants. In Group III, bleached specimens received composite build ups delayed by 1 week. In Groups IV, V, and VI bleached specimens received applications of superoxide dismutase (SOD), sodium ascorbate (SA), and tocopherol solutions, respectively, for 10 min. Following composite bonding, the micro shear bond strength (μSBS) was measured at a speed of 1 mm/min in universal testing machine. Statistical Analysis Used: The μSBS values of all the groups were analyzed using the analysis of variance followed by Tukey honestly significant difference post-hoc test. Results: Bonding of composites to unbleached group (Group I) exhibited the highest mean SBS values and among the antioxidant-treated groups, the highest SBS values were seen with SOD (Group IV) treated samples (23.0040 ± 4.30565 MPa). Conclusions: Application of SA, alpha-tocopherol, and SOD can effectively reverse the bond strength with bleached enamel. SOD gave a comparatively more promising reversal of bond strength than SA and alpha-tocopherol, and deserves further studies.

scholarly journals Effect of Immediate Dentin Sealing and Surface Conditioning on the Microtensile Bond Strength of Resin-based Composite to Dentin

2019 ◽  
Vol 44 (6) ◽  
pp. E289-E298 ◽  
Author(s):  
CRG van den Breemer ◽  
M Özcan ◽  
MS Cune ◽  
AP Almeida Ayres ◽  
B Van Meerbeek ◽  
...  
Keyword(s):  
Bond Strength ◽  
Analysis Of Variance ◽  
Water Storage ◽  
Silica Coating ◽  
Microtensile Bond Strength ◽  
Surface Conditioning ◽  
Clinical Procedures ◽  
Significant Difference ◽  
The One ◽  
Storage Times

SUMMARY This study evaluated the microtensile bond strength (μTBS) of resin-based composite (RBC) to dentin after different immediate dentin sealing (IDS) strategies and surface-conditioning (SC) methods and on two water storage times. Human molars (n=48) were randomly divided into eight experimental groups involving four different IDS strategies—IDS-1L with one layer of adhesive, IDS-2L with two layers of adhesive, IDS-F with one layer of adhesive and one layer of flowable RBC, and DDS (delayed dentin sealing) with no layer of adhesive (control)—and two different SC methods—SC-P with pumice rubbing and SC-PC with pumice rubbing followed by tribochemical silica coating. The μTBS test was performed after one week and after six months of water storage, being recorded as the “immediate” and “aged” μTBS, respectively. Composite-adhesive-dentin microspecimens (0.9×0.9×8–9 mm) were stressed in tension until failure to determine the μTBS. Failure mode and location of failure were categorized. Two-way analysis of variance was applied to analyze the data for statistically significant differences between the experimental groups (p&lt;0.05). Two-way analysis of variance revealed no significant differences between the one-week μTBS specimens for IDS strategy (p=0.087) and SC methods (p=0.806). However, the interaction of IDS strategy and SC methods appeared statistically significant (p=0.016). The six-month specimen evaluation showed no significant difference in μTBS for SC (p=0.297) and SC/IDS interaction (p=0.055), but the μTBS of the IDS strategies differed significantly among them (p=0.003). For tribochemical silica-coated IDS, no significant effect of aging on μTBS was recorded (p=0.465), but there was a highly significant difference in μTBS depending on the IDS strategy (p&lt;0.001). In addition, the interaction of IDS and aging was borderline statistically significant (p=0.045). The specimens failed mainly at the adhesive-dentin interface for all experimental groups. Dentin exposure during clinical procedures for indirect restorations benefits from the application of IDS, which was shown to result in higher bond strength. No significant differences were found between cleaning with solely pumice or pumice followed by tribochemical silica coating.

Sign in / Sign up

Export Citation Format

Share Document