scholarly journals Temperature fluctuation improves oil palm (Elaeis guineensis) dura × pisifera seed germination

2020 ◽  
Vol 48 (1) ◽  
pp. 49-55 ◽  
Author(s):  
M.G. Norsazwan ◽  
U.R. Sinniah ◽  
A.B. Puteh ◽  
P. Namasivayam ◽  
M. Mohaimi ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Seed Germination ◽  
Ambient Temperature ◽  
Seed Production ◽  
Constant Temperature ◽  
Oil Palm ◽  
Temperature Fluctuation ◽  
Daily Maximum ◽  
Seed Processing ◽  
Temperature Amplitude

Oil palm is mainly propagated using dura × pisifera (D × P) hybrid seeds. Among the issues in D × P seed production are relatively poor seed germination and uniformity, despite heat treatment at 40°C to break dormancy. The conditions for germination post-heat-treatment may be a contributing factor. This study aimed to evaluate and compare the effect of constant 30°C or ambient temperature fluctuation at two different locations, Sime Darby Oil Palm Breeding Seed Processing Renggam, Johor and the Seed Production Unit (SPU) Banting, Selangor on oil palm D × P seed germination. At both locations, final mean germination percentage and speed were higher at fluctuating temperatures compared with constant 30°C. Under fluctuating conditions, the Oil Palm Breeding Seed Processing Renggam environment resulted in higher germination (85.8%) compared with SPU Banting (69.8%). Thus, the higher temperature amplitude (difference between daily maximum and minimum temperatures) was an important factor, resulting in higher germination. Therefore, oil palm can be germinated under ambient temperature conditions to obtain higher germination than under constant temperature, avoiding the need for maintaining expensive constant temperature germination rooms. In addition, a sufficiently high temperature amplitude can be beneficial in improving the ability to germinate and the speed of germination.

scholarly journals Effect of dry heat treatment along with some dormancy breaking chemicals on oil palm seed germination

2017 ◽  
Vol 112 ◽  
pp. 489-493
Author(s):  
K.M. Tabi ◽  
G.F. Ngando Ebongue ◽  
G.N. Ntsomboh ◽  
E. Youmbi
Keyword(s):  
Heat Treatment ◽  
Seed Germination ◽  
Oil Palm ◽  
Dormancy Breaking ◽  
Dry Heat ◽  
Dry Heat Treatment

Seed production and seed germination of Amsinckia hispida

1965 ◽  
Vol 5 (19) ◽  
pp. 495 ◽  
Author(s):  
DJ Connor
Keyword(s):  
Seed Germination ◽  
Environmental Factors ◽  
Seed Production ◽  
Constant Temperature ◽  
Cold Treatment ◽  
North West ◽  
Seed Maturity ◽  
Germination Behaviour ◽  
Western Victoria ◽  
North Western

Amsinckia hispida is a serious annual weed of cereal culture in north-western Victoria. Individual plants produce seed for up to two months in the spring and this provides a range of seed maturity that is reflected by a gradual build-up of germinability in the following autumn. In addition the seed has an optimum constant temperature for germination of 13�C (48�F) and responds markedly to a period of cold treatment. These three features act together to produce the series of Amsinckia populations which are characteristic of its autumn germination behaviour in north-west Victoria. Seeds which germinate early are responsible for infestations in the pasture phase and those which germinate later are not controlled by pre-sowing cultivation and remain to germinate within crops. The response of Amsinckia to environmental factors is such that these plants which germinate late within wheat crops have an extended rosette period and are highly competitive.

scholarly journals Specifics of soybean seed production and processing in 2019

2020 ◽  
Vol 24 (2) ◽  
pp. 85-88
Author(s):  
Miladin Kostić ◽  
Vojin Đukić ◽  
Aleksandar Ilić ◽  
Danka Dujović ◽  
Velimir Lončarević ◽  
...  
Keyword(s):  
Seed Germination ◽  
Moisture Content ◽  
Seed Production ◽  
Seed Quality ◽  
Soybean Seed ◽  
Seed Processing ◽  
The One ◽  
Very High

The soybean harvest in 2019 began at the end of August. The quality of the natural seed was very high. The moisture content of the harvested seeds ranged from 7.1 % to 14.1 %. Thanks to this humidity, there was no need to dry the seeds, which is very important given the fact that drying soybeans can reduce the quality. Seed germination ranged between 82 % and 96 %. It should be noted that 97 % of seeds were harvested with germination greater than 85 % while about 65 % of seeds had germination above 90 %. The weight of 1000 grains averaged about 160 g. Soybean seed processing started on time and without major problems. The purity of the processed seed was on average 99.4 %. Of the total amount of processed seeds, about 72 % of seeds had germination greater than 85 %. The achieved seed quality was better compared to the one in 2018.

scholarly journals Heat-treatment and germination of oil palm seeds (Elaeis guineensis Jacq.)

2013 ◽  
Vol 35 (3) ◽  
pp. 296-301 ◽  
Author(s):  
Márcia Green ◽  
Wanderlei Antonio Alves Lima ◽  
Antenor Francisco de Figueiredo ◽  
André Luiz Atroch ◽  
Ricardo Lopes ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Seed Germination ◽  
Oil Palm ◽  
Elaeis Guineensis ◽  
Germination Rate ◽  
Statistical Design ◽  
Natural Conditions ◽  
Elaeis Guineensis Jacq ◽  
Seeds Germination ◽  
Low Rate

Under natural conditions the germination of oil palm seeds may take years, and it is usually uneven and has a very low rate. To increase the germination rate it is necessary to break the dormancy, through heat-treatment (HT). In the germination of oil palm seeds produced by Embrapa Western Amazon the HT used is at 40 °C during 80 days. The objective of this study was to evaluate the periods of 40, 50, 60 and 80 days of HT at 40 °C on seeds germination of six oil palm cultivars BRS C2001, BRS C2328, BRS C2501, BRS C2528, BRS C3701 and BRS C7201. The statistical design was randomized block, 6 x 4 factorial, with four replications of 500 seeds each. The minimum HT period for maximum germination ranged from 45 days for BRS C2328 (70%) to 80 days for BRS C2528 (84%). For BRS C7201 was not observed significant effect of the HT period for seed germination, estimated as 82%. The maximum germination of oil palm seeds varies with the duration of heat treatment. With the exception of cultivar BRS C2528, heat treatment may be less than 80 days.

scholarly journals Ethephon-Induced Abscission of Oil Palm Fruits at Optimal Bunch Ripeness and Retting Period to Improve Commercial Seed Production

Horticulturae ◽  
2021 ◽  
Vol 7 (10) ◽  
pp. 380
Author(s):  
Jaime Yoke-Sum Low ◽  
Po-Yee Fong ◽  
Chee-Keng Teh ◽  
Ai-Ling Ong ◽  
Chin-Ming Lim ◽  
...  
Keyword(s):  
Seed Germination ◽  
Seed Production ◽  
Oil Palm ◽  
Fruit Abscission ◽  
Seed Loss ◽  
Commercial Seed ◽  
Ethephon Treatment ◽  
Bunch Rot ◽  
Fresh Fruit Bunches ◽  
Palm Fruits

Oil palm seed producers typically require 10 months of various processes from pollination to seed germination to produce commercial dura × pisifera hybrid seeds. Conventional forced fruit shedding from underripe fresh fruit bunches (FFB) usually causes seed damage and an extended retting period (incubation for natural fruit abscission from spikelets), eventually leading to bunch rot and disease infection. As a fruit ripening agent, ethephon has been explored to hasten fruit abscission in many fruit crops and oil palm. Nevertheless, the previous studies in oil palm only focused on fruit shedding from FFB to improve oil extraction rate in oil mills without considering the actual FFB ripeness and retting period, which are critical for oil palm seed production. In this study, the application of ethephon containing buffer (adjusted to pH 9.0) to underripe FFB at 145 days after pollination (DAP), 135 DAP and 125 DAP resulted in 50% more fruit abscission after a 72-h incubation. Considering the minimal seed loss upon FFB harvest (<1%) and 50% reduction in retting period, underripe FFB at around 145 DAP was found to be optimum for seed production using ethephon treatment. The treatment, however, made negligible improvement in fruit detachment for ripe FFB at 150 DAP and older. Importantly, seed germination and culling rate at nursery stages were not significantly affected by the ethephon treatment. Hence, ethephon application can improve commercial seed production practices for oil palm.

scholarly journals Life cycle inventory for the production of germinated oil palm seeds at a selected seed production unit in Malaysia

2013 ◽  
Author(s):  
Nik Sasha Khatrina Khairuddin ◽  
B. S. Ismail ◽  
Halimah Muhamad ◽  
Choo Yuen May
Keyword(s):  
Life Cycle ◽  
Seed Production ◽  
Oil Palm ◽  
Life Cycle Inventory ◽  
Production Unit

INFLUENCE DES CULTIVARS ET DES STADES DE PRÉLÈVEMENT DE LA PREMIÈRE POUSSE SUR LA PRODUCTION DE SEMENCE DE TRÈFLE ROUGE

1990 ◽  
Vol 70 (4) ◽  
pp. 1071-1080 ◽  
Author(s):  
LUCIUS BELZILE
Keyword(s):  
Seed Germination ◽  
Seed Production ◽  
Seed Yield ◽  
Trifolium Pratense ◽  
Red Clover ◽  
Kernel Weight ◽  
Climatic Conditions ◽  
Cultivar Group ◽  
Stage Of Development ◽  
Clover Seed

For five years, the effect of cultivars and vegetative stage of cutting were measured on red clover (Trifolium pratense L.) seed production. The first group of cultivars included Hungaropoli, Ottawa and Lakeland harvested in 1981 and 1982. The second group included Arlington, Florex and Prosper I harvested in 1984, 1985 and 1987. The total annual seed yield differed within cultivars and the highest seed yield was obtained with Hungaropoly and Florex. In the first cultivar group, the tetraploid Hungaropoly obtained a kernel weight higher than the diploids Lakeland and Ottawa. In the second group of cultivars, all diploids, Arlington yielded the highest kernel weight. The percentage of seed germination of Hungaropoly was higher than Lakeland and Ottawa while for Florex it was slightly higher than Arlington and Prosper I. A prior vegetative cutting is essential for good seed yield. In the absence of vegetative cutting seed weight seemed improved. The stage of development at which vegetative cutting is done has little influence on percentage seed germination. These results have shown that despite the strong effect of climatic conditions on seed production, the choice of the optimum stage for vegetative cutting and a well adapted cultivar are important aspects in successful seed production.Key words: Red clover, seed production, cultivar, stage of cutting

scholarly journals Small Diameter Tube Post-Weld Heat Treatment Process with Brinell Hardness and Microstructure Inspection

2021 ◽  
Vol 2083 (2) ◽  
pp. 022009
Author(s):  
Xiangqian Qi
Keyword(s):  
Heat Treatment ◽  
Constant Temperature ◽  
Welded Joints ◽  
Brinell Hardness ◽  
Lath Martensite ◽  
Small Diameter ◽  
Hardness Test ◽  
Post Weld Heat Treatment ◽  
Microstructure Observation ◽  
Weld Heat

Abstract The local post-weld heat treatment (PWHT) process test of 9Cr-3W-3Co small-diameter pipe welded joints was carried out using rope-type resistance heaters with different parameters, and the Brinell hardness test and microstructure observation were carried out on the welded joints after heat treatment. The results show that when the heating width was 200mm, the constant temperature was 790°C-800°C, and the constant temperature time was 2 hours, the Brinell hardness of the weld was in the range of 246HBW-265HBW, which had good performance. After tempering at 760°C-800°C, the welds all showed a clear tempered lath martensite.

scholarly journals Flowering, Fecundity, Seed Germination, and Seed Viability of Viburnum opulus L. Cultivars

2009 ◽  
Vol 27 (1) ◽  
pp. 31-36
Author(s):  
Janine R. Conklin ◽  
James C. Sellmer
Keyword(s):  
Seed Germination ◽  
Seed Production ◽  
Seed Viability ◽  
Biological Traits ◽  
Limited Information ◽  
Viable Seed ◽  
Invasive Potential ◽  
Short Term ◽  
Viburnum Opulus ◽  
Tetrazolium Test

Abstract Mature specimens of Viburnum opulus and cultivars ‘Leonard's Dwarf’ and ‘Roseum’ were assessed over 2 years for flower and seed production, seed germination, and seed viability as determined by a tetrazolium test to understand their invasive potential. ‘Aureum’, ‘Compactum’, ‘Losely's Compact’, ‘Nanum’, and ‘Xanthocarpum’ were also tested for germination and viability of seeds. Cultivars differed in flower and seed production, seed germination, and seed viability. ‘Roseum’ prolifically produced highly viable seed that germinated at moderate rates under greenhouse conditions (8,354, 100%, and 73%, respectively). Viburnum opulus and ‘Leonard's Dwarf’ produced fewer viable seed which showed moderate to low germination rates (609, 100%, and 53%; 712, 100%, and 5%, respectively). ‘Aureum’ and ‘Xanthocarpum’ seeds germinated at moderate rates (55 and 25%, respectively) and were highly viable (100%). ‘Compactum’, ‘Losely's Compact’, and ‘Nanum’ germinated at low rates or failed to germinate (0, 0, and 5%, respectively), yet seeds were moderately viable (37, 65, and 55%, respectively). Seeds of all cultivars germinated at low rates or failed to germinate at both outdoor sites (0 to 5%) which suggests these plants may be weakly invasive. Short-term studies on biological traits such as these provide only limited information to assess the invasive potential of cultivars.

Sign in / Sign up

Export Citation Format

Share Document