Suitability Analysis of Solar Tracking PV System in the Airport Based on Glare Assessment

Author(s):  
S. Sreenath ◽  
K. Sudhakar ◽  
A.F. Yusop

Due to the concerns with harmful emissions, airports have a great interest in solar photovoltaic technology. On the one hand, the vacant land areas in the airport can house solar PV arrays. On the other hand, there is an aviation safety issue due to the reflections from the solar PV arrays. This paper aims to perform a glare analysis of a conceptual solar PV array for three different solar tracking techniques. This suitability analysis is carried out for fixed-tilt, single-axis and dual-axis tracking techniques using ForgeSolar software. It is observed that a single-axis tracking solar PV system is a suitable tracking technique for the selected site. This can be attributed to zero minutes of glare duration and the highest value of energy generation. In addition to compliance with the FAA’s solar glare policy, the single-axis tracking solar PV system will generate 40 % more electricity than a fixed-tilt solar PV system. Unlike previously reported studies, the results of this study strengthen the theoretical support for tracking solar PV systems in airport locations. The findings provided in this study will be beneficial to energy professionals and serve as reference material for tracking solar PV in airports.

Author(s):  
Rakesh Dalal ◽  
Kamal Bansal ◽  
Sapan Thapar

Rooftop solar photovoltaic(PV) installation in India have increased in last decade because of the flat 40 percent subsidy extended for rooftop solar PV systems (3 kWp and below) by the Indian government under the solar rooftop scheme. From the residential building owner's perspective, solar PV is competitive when it can produce electricity at a cost less than or equal grid electricity price, a condition referred as “grid parity”. For assessing grid parity of 3 kWp and 2 kWp residential solar PV system, 15 states capital and 19 major cities were considered  for the RET screen simulation by using solar isolation, utility grid tariff, system cost and other economic parameters. 3 kWp and 2 kWp rooftop solar PV with and without subsidy scenarios were considered for simulation using RETscreen software. We estimate that without subsidy no state could achieve grid parity for 2kWp rooftop solar PV plant. However with 3 kWp rooftop solar PV plant only 5 states could achieve grid parity without subsidy and with government subsidy number of states increased to 7, yet wide spread parity for residential rooftop solar PV is still not achieved. We find that high installation costs, subsidized utility grid supply to low energy consumer and financing rates are major barriers to grid parity.


2012 ◽  
Author(s):  
Firdaus Muhammad Sukki ◽  
Roberto Ramirez Iniguez ◽  
Scott G. Mcmeekin ◽  
Brian G. Stewart ◽  
Barry Clive

Solar energy has become a matter of global attention in the past few years. This paper explores the use and benefit of solar concentrators in the solar photovoltaic (PV) systems. First, a short literature review of previous research on the usage of solar concentrators in improving solar PV system performance and reducing the cost of implementation is presented. This is followed by an overview of SolarBrane, an example of a Building Integrated photovoltaic (BIPV) system which uses an optical concentrator in the solar PV design. An optimised design of the SolarBrane is also discussed afterwards. A financial benefit study is conducted to compare the average return of investment of using the optimised SolarBrane and traditional solar PV installed in Malaysia’s environment. SolarBrane has proven to be a good alternative to achieve costeffective solar PV system. The financial analysis simulated under the new Malaysian Feed–In Tariff scheme indicates that the optimised SolarBrane could potentially reduce the initial cost of implementation by 40% and generate higher return, close to 20%, when compared to traditional solar PV systems. Key words: Solar photovoltaic; solar concentrator; solarBrane; dielectric totally internally reflecting concentrator; financial analysis


The need to electrify all rural areas in India is quite compelling. However, the focus has now shifted from traditional fuel-based systems to generate electricity to renewable sources for energy generation. Though there are subsidies and policies that encourage the use of solar Photovoltaic (PV) systems, there is a need for an appropriate framework. This framework could not only offer substantial directions but it would also act as grounds to enhance rural electrification in India using solar PVs. From this perspective, the current research attempts to structure an innovative framework for solar PV system that could facilitate rural electrification in India. In particular, the district of Damoh in Madhya Pradesh was chosen as there are many villages without electricity in this district. PVsyst software was utilized to simulate the outcomes that included mathematical models and diverse components based on PV, for simulation. Three designs were developed to facilitate the simulation. These included; PVs linked with microgrid devoid of battery, individual PV systems without microgrid link and solar PVs linked to microgrid with battey. The framework for rural electrification using solar PVs will offer policy makers with insights with regards to implementing PV systems. It will also offer inputs as to the feasibility of implementing a specific system on several parameters. These would comprise of; number of households within a village, detached households etc. Nonetheless, research in future is also warranted to explore the scope for other sources of renewable energy.


2021 ◽  
pp. 1-32
Author(s):  
Mohammad Hamed ◽  
Adnan AlMasri ◽  
Zakariya Dalala ◽  
Raed Alsaleh

Abstract This paper addresses two key decisions by households to adopt rooftop solar PV systems and the length of time until the adoption. It is hypothesized that these decisions are controlled by different mechanisms and should be modelled independently. This is the first attempt to formally estimate the length of time until the adoption to the authors' knowledge. Two models are presented in this paper. The first is a mixed logit to model the respondents' intention to adopt a solar PV system, and the second is a random parameters ordered probit to estimate the length of time until the adoption. Estimation results show that the number of electrical appliances, the households' interest to harness economic benefits, and the type and characteristics of the dwelling motivate households to select a shorter duration until the adoption. Results also show that the majority (77.80%) of respondents with EVs are highly likely to adopt a rooftop system and select a shorter time duration until adoption. In addition, a significant proportion (83.23%) of respondents with high monthly electricity bills are more likely to adopt a rooftop PV system and select a shorter time duration. Results show that the average monthly electricity bill for households with a PV system has decreased by 74.04%. Reducing monthly electricity bills is a key instigator for adopting a rooftop PV system. Our results confirm the hypothesis that even if there is an intent to adopt a rooftop solar PV system, the length of time until the adoption is controlled by another mechanism.


2016 ◽  
Vol 5 (3) ◽  
pp. 179-185 ◽  
Author(s):  
Jeffrey Tamba Dellosa

The Renewable Energy Act of 2008 in the Philippines provided an impetus for residential owners to explore solar PV installations at their own rooftops through the Net-Metering policy. The Net-Metering implementation through the law however presented some concerns with inexperienced electric DU on the potential effect of high residential solar PV system installations. It was not known how a high degree of solar integration to the grid can possibly affect the operations of the electric DU in terms of energy load management. The primary objective of this study was to help the local electric DU in the analysis of the potential effect of high residential solar PV system penetration to the supply and demand load profile in an electric distribution utility (DU) grid in the province of Agusan del Norte, Philippines. The energy consumption profiles in the year 2015 were obtained from the electric DU operating in the area. An average daily energy demand load profile was obtained from 0-hr to the 24th hour of the day based from the figures provided by the electric DU. The assessment part of the potential effect of high solar PV system integration assumed four potential total capacities from 10 Mega Watts (MW) to 40 MW generated by all subscribers in the area under study at a 10 MW interval. The effect of these capacities were measured and analyzed with respect to the average daily load profile of the DU. Results of this study showed that a combined installations beyond 20 MWp coming from all subscribers is not viable for the local electric DU based on their current energy demand or load profile. Based from the results obtained, the electric DU can make better decisions in the management of high capacity penetration of solar PV systems in the future, including investment in storage systems when extra capacities are generated.Article History: Received July 15th 2016; Received in revised form Sept 23rd 2016; Accepted Oct 1st 2016; Available onlineHow to Cite This Article: Dellosa, J. (2016) Potential Effect and Analysis of High Residential Solar Photovoltaic (PV) Systems Penetration to an Electric Distribution Utility (DU). Int. Journal of Renewable Energy Development, 5(3), 179-185.http://dx.doi.org/10.14710/ijred.5.3.179-185


This paper presents a thorough audit on various techniques of Photovoltaic (PV) framework under Partial Shading Conditions (PSC) which improves the yield voltage and power. Various productions report on PV with respect to control upgrades and its execution. In any case, perplexity emerges while choosing an approach that performs under every climatic circumstance. In this way, a fundamental audit of PSC systems is considered, which depends on most extreme power point following (MPPT) at Standard Test Conditions (STC). These MPPT strategies can follow the Global Peak (GP) at PSC. Broad research has been investigated in this field and numerous systems have been accounted for. In this paper, a point by point portrayal and order on various procedures of PV at PSC have been made as far as control factors, structure and hardware utilized in down to earth and business applications. Incomplete Shading is a significant test in photovoltaic (PV) frameworks which influences the quality and amount of the output power. The ordinary change of condition and the diminished profitability of PV Array is a significant obstruction in the brisk advancement of the sunlight based power age. A Solar PV system involves PV cluster connected with an Inverter through a dc-dc converter and the yield of the Inverter is associated with the heap. In any case, expansion to PV modules, and exhibit design, control electronic converters are in like manner fundamental parts for a sun oriented based power generation. It is basic to fathom the effect of fractional concealing to make compelling and strong Photovoltaic vitality transformation structure. PV exhibit course of action, converter arrangement and MPPT control strategy are the three basic districts where the vitality extraction from PV bunch can be improved under incomplete concealed condition. A point by point assessment study is coordinated among central and Micro-Inverter based PV systems and particular MPPT control techniques were pondered and considered under fractional concealed condition using MATLAB/Simulink.


Author(s):  
David A. Torrey ◽  
James M. Kokernak

State-sponsored incentives have played a significant role in driving the demand for residential and small commercial photovoltaic (PV) systems. All state incentive programs are tied to the power rating of the system, though some states also offer energy production incentives. Unfortunately, there is a disconnect between the power rating of a PV system and the energy that system produces over its lifetime. It is extremely important to consider system productivity, which goes well beyond the efficiency of the components. System productivity is tied directly to the structure of the array, not just the efficiency of the components and the quality of the installation. This paper examines the issues associated with improving solar PV system productivity. The focus is on comparing a series-parallel array configuration to a series-string array configuration and the impact on energy production. Partial shade is used to highlight substantial differences between the operation of the two array configurations.


Solar Energy ◽  
2002 ◽  
Author(s):  
Kenneth W. Stone ◽  
Vahan Garboushian ◽  
Herb Hayden

Amonix has designed, manufactured, installed, and tested over 500 kW of high concentrating PV systems based around a concentrating silicon cell that set a new world efficiency record in 1992. This paper describes the development of this product as well as the physical and operating characteristics of the system. The operating characteristics that make this system attractive for grid, distributed, and off-grid are discussed. Data is presented that demonstrates the high daily power generating capability and the energy performance of the concentrating PV system. Other attributes of the system are also discussed such as the automatic/unattended operation, the short installation time, etc. An array installed at Pomona, CA is described, it has operated unattended for over 3 years and is still producing power today.


Author(s):  
Bharosh Kumar Yadav ◽  
Pankaj Kumar Rauniyar ◽  
K Sudhakar ◽  
Tri Ratna Bajracharya ◽  
S Shanmuga Priya

ABSTRACT In today’s world, where global warming is one of the greatest human challenges, sustainable energy generation is becoming increasingly relevant. The use of green and clean energy sources is the best way to minimize CO2, CO, NOX and other emissions of conventional energy usage. Solar photovoltaic (PV) systems are more beneficial and an exciting application to set up an eco-friendly green educational campus. In this regard, the potential sites within Tribhuvan University, Institute of Engineering, Purwanchal Campus, Dharan city, Nepal are analysed for grid-tied solar PV power plant installation to meet the 100% energy demand of the campus using energy, economic and environment-friendly analysis. The daily, monthly and annual load and solar irradiance data of past years of the campus have been analysed to estimate the solar PV plant’s capacity and system performance using PVSYST V7.0 software analysis tools .The simulation results show that 110 kWp of solar PV power plant will be sufficient for the entire campus to qualify for the first fully green-powered campus in Nepal, which corresponds to fulfill 66.4 MWh/year daytime energy demand out of total 161 MWh/year energy consumption of the campus with a capacity to generate a total of 181.5 MWh/year energy from the designed solar PV system. The result also shows that 115.1 MWh/year of surplus energy produced from the PV power plant can be injected into the utility grid to yield considerable savings in utility cost. On the basis of these results, campus authorities and stakeholders may commit to investing and implementing of this project to ensure that the campus is completely green.


Sign in / Sign up

Export Citation Format

Share Document