scholarly journals Laccase production by Pycnoporus sp. W-9 using rose dregs and its application for phenol degradation

BioResources ◽  
2020 ◽  
Vol 15 (2) ◽  
pp. 2621-2629
Author(s):  
Xiaohui Liang ◽  
Dongliang Hua ◽  
Yuxiao Zhao ◽  
Hongyu Si ◽  
Bing Wang
Keyword(s):  
Phenol Degradation ◽  
Tween 80 ◽  
Laccase Production ◽  
Phenol Removal ◽  
Optimal Conditions ◽  
Disodium Hydrogen Phosphate ◽  
Box Behnken Design ◽  
Original Production ◽  
Triton X ◽  
Central Composite

Rose dregs were used for laccase production by the strain Pycnoporus sp. W-9 under liquid fermentation, and the obtained laccase was used for phenol degradation. The conditions for laccase production were optimized by Box-Behnken design, and the phenol degradation conditions using the crude laccase were optimized by central composite design. The optimal conditions for laccase production by the strain W-9 were as follows: rose dregs (40 g/L), KCl (0.144 g/L), KH2PO4 (1 g/L), K2HPO4 (0.699 g/L), NaCl (0.2 g/L), MgSO4·7H2O (0.3 g/L), CuSO4·5H2O (0.306 g/L), Tween 80 (0.2 g/L), and CaCO3 (1 g/L), at a pH of 6.0, incubated at 30 °C and 200 rpm for 7 d. The corresponding laccase yield reached 17.4 U/mL, which was approximately 1.8 times the original production. The optimal conditions for phenol removal by the crude laccase were as follows: laccase (12.2 U/mL), 0.1 mol/L citric acid-disodium hydrogen phosphate buffer (pH 3.5), phenol (100 μg/mL), and Triton X-100 (284 μg/mL), incubated at 45 °C for 2 h. The corresponding phenol degradation rate reached 86.6%. These results should be useful for utilization of rose dregs and bioremediation of soil and wastewater.

Computational simulation applied to improve fuel bioethanol distillation

2013 ◽  
pp. 645-650
Author(s):  
Fabio R.M. Batista ◽  
Antonio J.A. Meirelles
Keyword(s):  
Experimental Validation ◽  
Computational Simulation ◽  
Industrial Plant ◽  
Careful Study ◽  
Optimal Conditions ◽  
Liquid Equilibrium ◽  
Steam Consumption ◽  
Wine Composition ◽  
Standard Solution ◽  
Central Composite

Experimental validation of the process simulation a typical industrial bioethanol unit was conducted, comparing the obtained results with the information collected in an industrial plant. A standard solution containing water, ethanol and 17 congeners was chosen to represent the fermented must, whose composition was selected according to analyses of samples of industrial wines. A careful study of the vapour-liquid equilibrium of the wine components was performed. An attempt to optimise the industrial plant was conducted considering two optimising approaches: the central composite design (CCD) and the Sequential Quadratic Programming (SQP). The process was investigated in terms of bioethanol alcoholic graduation, ethanol recovery, energy consumption and ethanol loss. The results showed that the simulation approach was capable of correctly reproducing a real plant of bioethanol distillation and that the optimal conditions are slightly different from those used at the industrial plant investigated. Substantial fluctuations in wine composition were easily controlled for the two loop controls preventing an off-specification product. The optimised conditions indicate a distillation process able to produce bioethanol according to the legislation requirements and with appropriate steam consumption and loss of ethanol. However, for the production of alcohols with superior qualities, substantial changes in the production system may be required.

Accelerated Phenol Removal by Amplifying the Metabolic Pathway with a Recombinant Plasmid Encoding Catechol 2, 3 Oxygenase

1992 ◽  
Vol 26 (9-11) ◽  
pp. 2191-2194 ◽  
Author(s):  
M. Fujita ◽  
M. Ike ◽  
T. Kamiya
Keyword(s):  
Metabolic Pathway ◽  
Recombinant Plasmid ◽  
Removal Rate ◽  
Phenol Degradation ◽  
Wild Strain ◽  
Phenol Concentration ◽  
Phenol Removal

The metabolic pathway of the phenol degradation in Pseudomonasputida BH was amplified by introducing the recombinant plasmid containing catechol 2,3 oxygenase gene isolated fron the chromosome of BH. This strain could degrade phenol and grow much faster than the wild strain at the phenol concentration of 100mg/L. This strain seems to accelerate the phenol removal rate if it is applied to the treatment of wastewater containing phenol.

Spectrophotometric study of the complexation equilibria of cadmium ions with 5-bromo and 5-chloro derivatives of 2-(2-pyridylazo)-5-diethylaminophenol (BrPADAP, ClPADAP)

1983 ◽  
Vol 48 (1) ◽  
pp. 52-59 ◽  
Author(s):  
Vlastimil Kubáň ◽  
Miroslav Macka
Keyword(s):  
Equilibrium Constants ◽  
Spectrophotometric Study ◽  
Graphical Analysis ◽  
Optimal Conditions ◽  
Cadmium Ions ◽  
Brij 35 ◽  
Ethanol Medium ◽  
Triton X ◽  
Derivatives Of

The composition, optical characteristics, molar absorption coefficients and equilibrium constants of the reactions of formation of the ML and ML2 complexes of both reagents with cadmium(II) ions were determined by graphical analysis and numerical interpretation of the absorbance-pH curves by the modified SQUAD-G program. Optimal conditions were proposed for the spectrophotometric determination of Cd in 10% v/v ethanol medium in the presence of 0.1% w/v Triton X-100 or 1% w/v Brij 35. BrPADAP and ClPADAP are the most sensitive spectrophotometric reagents for the determination of cadmium(II) ions (ε = 1.28-1.44 . 105 mmol-1 cm2 at 560 nm and pH 8.0-9.5) with a high colour contrast in the reaction (Δλmax ~117 nm) and a selectivity similar to that of other N-heterocyclic azodyes (PAR, PAN, etc.).

Modeling of supercritical fluid extraction of flavonoids from Calycopteris floribunda leaves

2014 ◽  
Vol 68 (3) ◽  
Author(s):  
Xiong Liu ◽  
Dong-Liang Yang ◽  
Jia-Jia Liu ◽  
Kuan Xu ◽  
Guo-Hui Wu
Keyword(s):  
Supercritical Fluid Extraction ◽  
Supercritical Fluid ◽  
Extraction Process ◽  
Optimal Conditions ◽  
Fluid Extraction ◽  
Pressure Method ◽  
Organic Solvent Extraction ◽  
Drug Lead ◽  
Temperature And Pressure ◽  
Central Composite

AbstractThe aim of this study was to obtain flavonoids extracts from Calycopteris floribunda leaves using supercritical fluid extraction (SFE) with CO2 and a co-solvent. Pachypodol, a potential anticancer drug lead compound separated from the extracts, was examined. Classical organic solvent extraction (CE) with ethanol was performed to evaluate the high pressure method. HPLC analysis was introduced to interpret the differences between SFE and CE extracts in terms of antioxidant activity and the concentration of pachypodol. SFE kinetics and mathematical modeling of the overall extraction curves (OEC) were investigated. Evaluation of the models against experimental data showed that the Sovová model performs the best. The supercritical fluid extraction process was optimized using a central composite design (CCD), where temperature and pressure were adjusted. The optimal conditions of SFE were: pressure of 30 MPa and temperature of 35°C.

scholarly journals Improvement of the Culture Medium for the Dichlorvos-Ammonia (DV-AM) Method to Selectively Detect Aflatoxigenic Fungi in Soil

Toxins ◽  
2018 ◽  
Vol 10 (12) ◽  
pp. 519 ◽  
Author(s):  
Kimiko Yabe ◽  
Haruna Ozaki ◽  
Takuya Maruyama ◽  
Keisuke Hayashi ◽  
Yuki Matto ◽  
...  
Keyword(s):  
Culture Medium ◽  
Agar Medium ◽  
Carbon Sources ◽  
Tween 80 ◽  
Selective Medium ◽  
Selective Detection ◽  
Aflatoxigenic Fungi ◽  
Aspergillus Nomius ◽  
Rhizopus Sp ◽  
Triton X

The dichlorvos-ammonia (DV-AM) method is a simple but sensitive visual method for detecting aflatoxigenic fungi. Here we sought to develop a selective medium that is appropriate for the growth of aflatoxigenic fungi among soil mycoflora. We examined the effects of different concentrations of carbon sources (sucrose and glucose) and detergents (deoxycholate (DOC), Triton X-100, and Tween 80) on microorganisms in soils, using agar medium supplemented with chloramphenicol. The results demonstrated that 5–10% sucrose concentrations and 0.1–0.15% DOC concentrations were appropriate for the selective detection of aflatoxigenic fungi in soil. We also identified the optimal constituents of the medium on which the normal rapid growth of Rhizopus sp. was completely inhibited. By using the new medium along with the DV-AM method, we succeeded in the isolation of aflatoxigenic fungi from non-agricultural fields in Fukui city, Japan. The fungi were identified as Aspergillus nomius based on their calmodulin gene sequences. These results indicate that the new medium will be useful in practice for the detection of aflatoxigenic fungi in soil samples including those from non-agricultural environments.

Influence of Surfactants on Biodegradation of Chlordane by Wood-Rotting Fungus

2013 ◽  
Vol 361-363 ◽  
pp. 908-911
Author(s):  
Peng Fei Xiao ◽  
Tie Xue You ◽  
Yu Zhen Song ◽  
Shan Ying ◽  
Jian Qiao Wang
Keyword(s):  
Liquid Medium ◽  
Degradation Rate ◽  
Solid Medium ◽  
Fungal Growth ◽  
Tween 80 ◽  
Positive Effects ◽  
Lower Effect ◽  
Triton X

Wood-rotting fungus,Phlebia lindtneriGB 1027, was tested in toxicity assays with three surfactants in order to select surfactants for degradation assays of chlordane. Tween 80 and Triton X-100 appeared to have lower effect on the fungal growth on solid medium, while higher effect of fungal growth was observed in solid medium with SDS. Tween 80 had positive effects both on the chlordane degradation and the fungal growth. When fungus was incubated on PDB liquid medium with Tween 80 of 10 CMC after 20 d, 78.6% of chlordane was removed. In the treatments with Triton X-100, this strain showed comparatively greatest degradation rate (70.8%) of chlordane at a concentration of 2 CMC. However, when Triton X-100 concentration was higher than 2 CMC (5 and 10 CMC), the enhancement for the biodegradation of chlordane decreased.

scholarly journals OPTIMIZING THE PROCESS OF TRANSFORMING COFFEE HUSKS INTO BIOCHAR BY MEANS OF HYDROTHERMAL CARBONIZATION

2018 ◽  
Vol 54 (4B) ◽  
pp. 138
Author(s):  
Tran Thi Hien
Keyword(s):  
Maximum Yield ◽  
Hydrothermal Carbonization ◽  
Optimal Conditions ◽  
Coffee Husk ◽  
Optimal Value ◽  
Face Centered ◽  
Composite Face ◽  
Temperature Time ◽  
Central Composite ◽  
Water Ratio

The conditions of the hydrothermal carbonization process to produce biochar from coffee husk will be optimized for maximum yield. Besides, response surface methodology (RSM) and central composite face-centered (CCF) method will be used in designing experiments. Also, the optimal value of factors such as temperature, time and biomass: water ratio which can provide a maximum yield of biochar will be worked out using Modde 5.0. As a result, the optimal conditions for maximum yield of biochar was obtained as temperature of 180 oC, 3.5 h and biomass: water ratio of 15 %. It can also be concluded that temperature has greater impact on the transformation of biochar than time and biomass: water ratio.

scholarly journals Pineapple Bark Performance in Dyes Adsorption: Optimization by the Central Composite Design

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Ahlam Fegousse ◽  
Abdelali El Gaidoumi ◽  
Youssef Miyah ◽  
Rabea El Mountassir ◽  
Anissa Lahrichi
Keyword(s):  
Central Composite Design ◽  
Design Methodology ◽  
Brilliant Green ◽  
Optimal Conditions ◽  
Initial Concentration ◽  
Dyes Adsorption ◽  
Experimental Design Methodology ◽  
Central Composite ◽  
Adsorbent Dose ◽  
Scanning Electron

This work is concerned with the study of the adsorption in aqueous medium of a three-dye mixture which contains Methylene Blue, Brilliant Green, and Congo Red on the pineapple bark. This adsorbent material has been characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR). The experimental design methodology, based on the response surface methodology (RSM) by the central composite design (CCD), has been applied for the optimization of the parameters, namely, the temperature, dose of the adsorbent, and pH. The yield reached 98.91% under optimal conditions (T = 30°C; adsorbent dose = 2.5 g·L−1; pH = 9.8) at an initial concentration of 20 mg·L−1.

scholarly journals Oil sludge washing with surfactants and co-solvents: oil recovery from different types of oil sludges

2020 ◽  
Author(s):  
Diego Ramirez ◽  
Liz J. Shaw ◽  
Chris D. Collins
Keyword(s):  
Oil Recovery ◽  
Sodium Dodecyl ◽  
Tween 80 ◽  
Selective Extraction ◽  
Oil Sludge ◽  
High Effect ◽  
Recovery Techniques ◽  
Different Types ◽  
Triton X ◽  
Different Sources

Abstract Different physicochemical and biological treatments have been used to treat oil sludges, and oil recovery techniques are preferred such as oil sludge washing (OSW) with surfactants and co-solvents. Toluene is commonly used as co-solvent, but it is non-benign to the environment. This study tested alternative co-solvents (n-pentane, n-hexane, cyclohexane, and isooctane) at 1:1 and 2:1 C/OS (co-solvent to oil sludge ratio). Also, this study evaluated the effect on the oil recovery rate (ORR) of three main parameters in the washing: type, concentration, and application ratio (S/OS) of surfactants to oil sludges. To date, no study has assessed these parameters in the washing of oil sludges from different sources. Four types of oil sludges and five surfactants (Triton X-100 and X-114, Tween 80, sodium dodecyl sulphate (SDS), and rhamnolipid) were used. The results showed that cyclohexane had high ORR and could be used instead of toluene because it is more benign to the environment. The S/OS ratio had a high effect on the ORR and depended on the type of oil sludge. Rhamnolipid, Triton X-100, and Triton X-114 had the highest oil recovery rates (40 – 70%). In addition, it was found that the surfactant concentration had no effect on the ORR. Consequently, the addition of surfactant was not significantly different compared to the washing with no surfactants, except for one sludge. The use of the surfactant in the washing solution can help in the selective extraction of specific oil hydrocarbon fractions in the recovered oil to assess its potential reuse as fuel. Further recommendations were given to improve the OSW process.

Sign in / Sign up

Export Citation Format

Share Document