Enhanced laccase activity of white rot fungi induced by different metal ions under submerged fermentation

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 8369-8383
Author(s):  
Qi An ◽  
Mei-Ling Han ◽  
Lu-Sen Bian ◽  
Zhi-Chao Han ◽  
Ning Han ◽  
...  
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Laccase Activity ◽  
Copper Ions ◽  
Copper Ion ◽  
White Rot Fungi ◽  
White Rot ◽  
Ferrous Ions ◽  
Mixed Metal ◽  
Manganese Ion

Submerged fermentation with single or mixed metal ions as inducers was used for laccase production from white rot fungi. Mixed metal ions were used for the first time as inducers for Pleurotus ostreatus and Flammulina velutipes to enhance laccase activity. The maximum laccase activity from P. ostreatus in basal media, metal ion media 1 containing copper ion, metal ion media 2 containing manganese ion, metal ion media 3 containing manganese and copper ions, metal ion media 4 containing ferrous ion, metal ion media 5 containing manganese and ferrous ions, metal ion media 6 containing ferrous and copper ions, and metal ion media 7 containing manganese, copper and ferrous ions were, respectively, approximately 21.5-fold, 4.7-fold, 14.9-fold, 16.9-fold, 4.0-fold, 11.0-fold, 12.7-fold, and 24.8-fold higher than that from F. velutipes. The combination of copper and manganese ions as inducers was superior to that of a single copper ion or manganese ion. The maximum laccase activity of P. ostreatus rose in media containing manganese and copper ions. The single copper ion as the inducer for enhancing laccase activity was more suitable for F. velutipes. These findings are helpful in selecting the appropriate single metal ion or mixed metal ions to enhance laccase activity.

scholarly journals Adsorption of Copper and Iron Using Low Cost Material as Adsorbent

2009 ◽  
Vol 6 (1) ◽  
pp. 161-168 ◽  
Author(s):  
Tariq S. Najim ◽  
Nazik J. Elais ◽  
Alya A. Dawood
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Copper Ions ◽  
Low Cost ◽  
Copper Ion ◽  
Freundlich Isotherm ◽  
Ferrous Ion ◽  
Initial Concentration ◽  
Solid Adsorbent ◽  
Pseudo Second Order

In this study, pine fruit was used as solid adsorbent for removal of ferrous and copper ions from aqueous solutions through batch equilibrium technique. The influence of contact time, pH of the solution and initial concentration of metal ions on adsorbed amount of metal ions were investigated. 90 minutes of adsorption time was found sufficient to reach equilibrium for ferrous ion and 120 minutes for copper ion. Adsorption of metal ions were pH dependent and the results indicate the optimum pH for the removal of Fe+2was found to be 5.0 and that of Cu+2was 7.0, the highest adsorption capacity was found to be 4.8 and 14.1 mg of metal ion per gram of adsorbent at initial concentration of 22.22 mg/L and 57.6 mg/L of ferrous and copper ions respectively and would be higher with higher initial concentration. Ferrous ion was removed by 96.3 - 97.3% and copper ion by 94.1-96% along the whole range of initial concentrations. Isotherm studies showed that the data were best fitted to the Freundlich isotherm model. The kinetic data corresponded well with the pseudo-second order equation, suggesting that the adsorption process is presumably a chemisorption.

scholarly journals An Investigation on Design and Characterization of a Highly Selective LED Optical Sensor for Copper Ions in Aqueous Solutions

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1099
Author(s):  
Sheng-Chun Hung ◽  
Chih-Cheng Lu ◽  
Yu-Ting Wu
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Copper Ions ◽  
Incident Light ◽  
Copper Ion ◽  
Intensity Change ◽  
Optical Absorbance ◽  
Sensing System ◽  
Optic Sensor ◽  
Cu Ions

The optical characteristics of copper ion detection, such as the photometric absorbance of specific wavelengths, exhibit significant intensity change upon incident light into the aqueous solutions with different concentrations of metal ions due to the electron transition in the orbit. In this study, we developed a low-cost, small-size and fast-response photoelectric sensing prototype as an optic sensor for copper (Cu) ions detection by utilizing the principle of optical absorption. We quantified the change of optical absorbance from infra-red (IR) light emitting diodes (LEDs) upon different concentrations of copper ions and the transmitted optical signals were transferred to the corresponding output voltage through a phototransistor and circuit integrated in the photoelectric sensing system. The optic sensor for copper (Cu) ions demonstrated not only excellent specificity with other metal ions such as cadmium (Cd), nickel (Ni), iron (Fe) and chloride (Cl) ions in the same aqueous solution but also satisfactory linearity and reproducibility. The sensitivity of the preliminary sensing system for copper ions was 29 mV/ppm from 0 to 1000 ppm. In addition, significant ion-selective characteristics and anti-interference capability were also observed in the experiments by the proposed approach.

scholarly journals Natural Batch Adsorption Operation to Remove Dissolved Copper (II) by Carbon Charcoal Rambutan

2021 ◽  
Vol 2129 (1) ◽  
pp. 012010
Author(s):  
B Haryanto ◽  
S E Saragih ◽  
R Tambun ◽  
H Harahap ◽  
K Manik ◽  
...  
Keyword(s):  
Metal Ions ◽  
Copper Ions ◽  
Copper Ion ◽  
Mesh Size ◽  
Total Weight ◽  
Batch Adsorption ◽  
Adsorbent Surface ◽  
Instrument Analysis

Abstract Carbon charcoal was made from rambutan rods and used as an adsorbent. A gram 70/100 mesh size of adsorbent was then used to adsorb 100 ml of copper ion solution with a 70 ppm concentration. In this investigation, the batch procedure was used without shaking (naturally). The charcoal carbon rambutan ability to remove the copper ion was measured by AAS. The percentage result was 48,135% or about 33,694 ppm. SEM and EDX instrument analysis have applied to confirm the presence of copper ions on the adsorbent surface. The copper ion was found at a concentration of 0.09 percent of the total weight. The carbon charcoal adsorbent in rambutan rods has the ability to purify the water contaminated by metal ions.

2,2î-Bipyridine Catalyzed Bleaching of Cotton Fibers with Peracetic Acid

1988 ◽  
Vol 58 (4) ◽  
pp. 198-210 ◽  
Author(s):  
James W. Rucker ◽  
David M. Cates
Keyword(s):  
Transition Metal ◽  
Metal Ions ◽  
Peracetic Acid ◽  
Metal Ion ◽  
Solution Treatment ◽  
Transition Metal Ions ◽  
Ferrous Ion ◽  
Cotton Fibers ◽  
Lauryl Sulfate ◽  
Ferrous Ions

Peracetic acid can be catalyzed to bleach cotton fibers at temperatures as low as 30°C by incorporating 2,2î-bipyridine in the bleach solution. Treatment of the fibers with HCl prior to bleaching reduces bleaching effectiveness by removing trace transition metal ions from the fibers. Sorption of individual ions (Cr+3 Mn+2, Fe+2, Fe+3 Co+2, Ni+2, Cu+2, and Zn+2) by HCl treated cotton fibers prior to bleaching indicates that the ferrous ion produces the greatest catalytic effect, and it is only effective when the metal ion is in the fiber as opposed to in solution. Ferrous ions in the fibers sorb 2,2î-bipyridine from solution to form the tris-2,2î-bipyridine ferrous ion complex that is associated with the fibers, and it is the trischelate associated with the fibers that catalyzes bleaching. The effects of pH, temperature, and concentrations of 2,2î-bipyridine, sodium lauryl sulfate, and transition metal ions (in the fibers and in solution) on bleaching effectiveness and peracetic acid decomposition have been studied, and a bleaching mechanism is proposed.

scholarly journals Excitation-Energy Transfer Paths from Tryptophans to Coordinated Copper Ions in Engineered Azurins: a Source of Observables for Monitoring Protein Structural Changes

2016 ◽  
Vol 230 (9) ◽  
Author(s):  
Giulia Di Rocco ◽  
Fabrizio Bernini ◽  
Marco Borsari ◽  
Ilaria Martinelli ◽  
Carlo Augusto Bortolotti ◽  
...  
Keyword(s):  
Energy Transfer ◽  
Excitation Energy ◽  
Metal Ions ◽  
Recombinant Proteins ◽  
Metal Ion ◽  
Structural Changes ◽  
Copper Ions ◽  
Excitation Energy Transfer ◽  
Ion Binding ◽  
Metal Ion Binding

AbstractThe intrinsic fluorescence of recombinant proteins offers a powerful tool to detect and characterize structural changes induced by chemical or biological stimuli. We show that metal-ion binding to a hexahistidine tail can significantly broaden the range of such structurally sensitive fluorescence observables. Bipositive metal-ions as Cu

scholarly journals Produksi dan karakterisasi lakase Omphalina sp. Production and characterization of Omphalina sp. laccase

2016 ◽  
Vol 75 (2) ◽  
Author(s):  
. SISWANTO ◽  
. SUHARYANTO ◽  
Rossy FITRIA
Keyword(s):  
Oil Palm ◽  
Laccase Activity ◽  
Research Result ◽  
White Rot Fungi ◽  
White Rot ◽  
Partial Purification ◽  
Empty Fruit Bunches ◽  
Optimum Ph ◽  
Laccase Enzyme

SummaryOmphalina sp. a white-rot fungi (WRF)originated from oil palm plantation has abilityto degrade empty fruit bunches of oil palm(EFBOP) so that it is expected to producelaccase with high activity. The ability ofOmphalina sp. to produce laccase enzyme onliquid fermentation will be studied. The enzymewill also be partially purified andcharacterized. The research result showed thatthe highest enzyme activity (1.162 U/mL) wasobtained using glucose malt yeast (GMY)medium at room temperature for four days.The addition of 2,5-xylidine as an inducerproduced laccase earlier i.e two days, but theactivity of laccase was less active afterprolonged incubation compared to that ofcontrol. The laccase produced on mediumcontaining 2% EFBOP reached optimumactivity as much as 0.38 U/mL after 10 th daysof incubation. Partial purification of laccaseon Sephacryl S-200 HR column resulted58.23% of yield recovery with twice purity thanbefore. The optimum pH of laccase was 4.5.Laccase activity was stable even after heatedon 50 o C for 30 minutes, but then decreasedwhen heated until 60 o C. The laccase has K Mand V max as much as 0.15 mM and 0.56 U/mLrespectively.RingkasanOmphalina sp., adalah fungi pelapuk putih(FPP) hasil isolasi dari kebun kelapa sawityang diketahui mampu mendegradasi tandankosong kelapa sawit (TKKS) dengan cepatsehingga diharapkan mampu menghasilkanlakase dengan aktivitas tinggi. KemampuanOmphalina sp. menghasilkan enzim lakasepada fermentasi cair akan dipelajari. Selain itu,lakase yang dihasilkan akan dimurnikan secaraparsial serta dilakukan karakterisasi pH, suhu,dan konsentrasi substrat optimum. Hasilpenelitian menunjukkan bahwa Omphalina sp.menghasilkan lakase dengan aktivitas tertinggi(1,162 U/mL) pada medium glucose malt yeast(GMY) yang diinkubasikan pada suhu ruangselama empat hari. Penambahan 2,5-xilidinsebagai induser mempercepat produksi lakaselebih awal yaitu dalam waktu dua hari, namunaktivitasnya masih lebih rendah dibandingkandengan kontrol pada inkubasi lebih lanjut.Lakase dari Omphalina sp. juga dapatdiproduksi pada medium yang mengandung2% TKKS dan aktivitasnya mencapai0,38 U/mL yang diinkubasi dalam suhu ruangselama 10 hari. Pemurnian parsial pada kolomSephacryl S-200 HR menghasilkan rendemensebesar 58,23% dengan kemurnian dua kalinya.Aktivitas lakase optimum pada pH 4,5 dantetap stabil setelah pemanasan selama 30 menitpada suhu ruang hingga 50 o C dan menuruntajam pada suhu 60 o C. Lakase Omphalina sp.menghasilkan nilai K M dan V maks masing-masing sebesar 0,15 mM dan 0,56 U/mL.

scholarly journals Comparative study on laccase activity of white rot fungi under submerged fermentation with different lignocellulosic wastes

BioResources ◽  
2020 ◽  
Vol 15 (4) ◽  
pp. 9166-9179
Author(s):  
Qi An ◽  
Jie Qiao ◽  
Lu-Sen Bian ◽  
Mei-Ling Han ◽  
Xun-You Yan ◽  
...  
Keyword(s):  
Submerged Fermentation ◽  
Laccase Activity ◽  
White Rot Fungi ◽  
Industrial Applications ◽  
Culture Conditions ◽  
White Rot ◽  
Laccase Production ◽  
Poplar Wood ◽  
Lignocellulosic Wastes ◽  
Cottonseed Hull

Different Pleurotus ostreatus and Flammulina velutipes species were compared relative to their ability to produce laccase in submerged fermentation of various lignocellulosic wastes. Fungi cultivation in identical culture conditions revealed wide differences among both species and strains of the same species. The laccase secretion ability of P. ostreatus strains was superior to F. velutipes strains. Maximum laccase production on cottonseed hull, corncob, and poplar wood was secreted by P. ostreatus CY 568, P. ostreatus CCEF 89, and P. ostreatus CY 568, respectively. The nature of lignocellulosic materials played an important role in determining the expression of laccase potential of fungi. The presence of cottonseed hull improved laccase activity and accelerated the rate of enzyme production. Maximum laccase production on cottonseed hull was nearly 1.29-fold and 1.53-fold higher than that on corncob and poplar wood, respectively. Laccase activity was detected in almost all tested strains on cottonseed hull on the first day, while only a few strains on poplar wood and corncob were detected on the first day. These findings will be helpful for selecting the appropriate strain in industrial applications and for optimization of integrated industrial laccase production.

scholarly journals Biosorpsi ion tembaga dalam limbah tailing menggunakan jamur pelapuk putih amobil Biosorption of copper ion in tailing mining effluent using immobilizede white-rot fungi

2016 ◽  
Vol 83 (1) ◽  
Author(s):  
Firda DIMAWARNITA ◽  
. SUHARYANTO ◽  
. TRI-PANJI1 ◽  
Nur RICHANA ◽  
Achmad ZAINUDIN
Keyword(s):  
Heavy Metals ◽  
Agricultural Land ◽  
Mining Industry ◽  
Copper Ion ◽  
White Rot Fungi ◽  
Ligninolytic Enzymes ◽  
Absorption Capacity ◽  
White Rot ◽  
Pollution Level ◽  
Empty Fruit Bunches

Abstract         Copper and gold mining industry produce large amount of tailings effluent containing heavy metals such as Cu and Hg that will polute  environment and agricultural land, if it is not properly treated.  Effort in reducing pollution level and recovery of metal in tailing could be conducted with biosorption process using microbial cell as an absorbent agent. This study aims to determine the ability of selected white rot fungi (WRF) immobilized on empty fruit bunches of oil palm (EFB)  to absorb Cu (II) metals in tailing. Based on growth rate, ligninolytic enzymes activity, and the absorption capacity of heavy metals, the superior WRF candidate was Omphalina sp. The ability of biomass Omphalina sp. to decrease the con-centrateion of Cu (II) with an initial concentration of 150 ppm, up to 63%. Omphalina sp. that immobilized on TKKS was able to reduce Cu (II) as much as 66-77% at pH 4.0 for 60 minutes. Abstrak                Eksploitasi tambang tembaga dan emas banyak menghasilkan limbah tailing yang masih me-ngandung logam berat seperti Cu (II) dan Hg (II). Limbah tersebut berpotensi mencemari perairan dan lahan pertanian bila tidak ditangani dengan baik.  Usaha untuk mengatasi limbah tailing dan sekaligus memekatkan (recovery) logam di dalam-nya dapat dilakukan dengan proses biosorpsi menggunakan sel mikroba. Penelitian ini bertujuan menetapkan kemampuan biomassa jamur pelapuk putih (JPP) yang diimobilisasi pada tandan kosong kelapa sawit (TKKS) dalam mengabsorpsi ion logam Cu (II). Metode biosorpsi logam yang digunakan dengan sistem batch dengan kadar logam 300 ppm, 200 ppm,dan 150 ppm. Hasil seleksi JPP berdasarkan laju pertumbuhan, aktivitas enzim ligninolitik, dan penyerapan logam berat telah  diperoleh   kandidat   JPP   unggul  yaitu Omphalina sp. Dalam media PDB,  Omphalina sp. toleran terhadap Cu (II) hingga konsentrasi 150 ppm. Kemampuan biomassa Omphalina sp. untuk penurunan konsentrasi Cu (II) dengan konsentrasi awal 150 ppm yaitu mencapai 63%. Omphalina sp. yang diimobilisasi dengan TKKS mampu menurun- kan kandungan Cu (II) sebesar 66-77%  pada pH 4.0 selama 60 menit. 

Sign in / Sign up

Export Citation Format

Share Document