scholarly journals Entropy generation for MHD natural convection in enclosure with a micropolar fluid saturated porous medium with Al2O3Cu water hybrid nanofluid

2021 ◽  
Vol 26 (6) ◽  
pp. 1123-1143
Author(s):  
A. Mahdy ◽  
S.E. Ahmed ◽  
M.A. Mansour
Keyword(s):  
Natural Convection ◽  
Entropy Generation ◽  
Saturated Porous Medium ◽  
Convection Heat Transfer ◽  
Hybrid Nanofluid ◽  
Nusselt Numbers ◽  
Pure Fluid ◽  
Left And Right ◽  
Hybrid Nanofluids ◽  
Increasing Function

This contribution gives a numerical investigation of buoyancy-driven flow of natural convection heat transfer and entropy generation of non-Newtonian hybrid nanofluid (Al2O3-Cu) within an enclosure square porous cavity. Hybrid nanofluids represent a novel type of enhanced active fluids. During the current theoretical investigation, an actual available empirical data for both thermal conductivity and dynamic viscosity of hybrid nanofluids are applied directly. Numerical simulation have been implemented for solid nanoparticles, the volumetric concentration of which varies from 0.0% (i.e., pure fluid) to 0.1% of hybrid nanofluids. Heat and sink sources are situated on a part of the left and right sides of the cavity with length B, while the upper and bottom horizontal sides are kept adiabatic. The stated partial differential equations describing the flow are mutated to a dimensionless formulas, then solved numerically via the help of an implicit finite difference approach. The acquired computations are given in terms of streamlines, isotherms, isomicrorotations, isoconcentraions, local Began number, total entropy, local and mean Nusselt numbers. The data illustrates that variations of ratio of the average Nusselt number to the averageNusselt of pure fluid Num+ is a decreasing function of Ha and φ, while e+ is an increasing function of Ha and φ parameters of hybrid nanofluid.

scholarly journals Nanoparticle shape effect on the natural convection heat transfer of hybrid nanofluid inside a U-shaped enclosure

2021 ◽  
pp. 139-139
Author(s):  
Muhammad Asmadi ◽  
Zailan Siri ◽  
Ruhaila Kasmani ◽  
Habibis Saleh
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Convection Heat Transfer ◽  
Hybrid Nanofluid ◽  
Shape Effect ◽  
Natural Convection Heat Transfer ◽  
Convection Heat ◽  
Triangular Finite Element ◽  
Nanoparticle Shape ◽  
Nusselt Numbers

The effect of nanoparticle shape on the natural convection heat transfer of Cu-Al2O3/water hybrid nanofluid inside a U-shaped enclosure is presented in this paper. The governing equations are transformed into the dimensionless form using dimensionless variables. A three-node triangular finite element method is used with the Newton-Raphson method to solve the problem numerically. The streamlines and isotherms as well as the local and average Nusselt numbers are presented for the fluid flow with Rayleigh number of 104 to 106.It is found that blade nanoparticle shape produces the highest heat transfer rate while sphere is the lowest.

scholarly journals Natural Convection of Dusty Hybrid Nanofluids in an Enclosure Including Two Oriented Heated Fins

2019 ◽  
Vol 9 (13) ◽  
pp. 2673 ◽  
Author(s):  
Raizah
Keyword(s):  
Natural Convection ◽  
Volume Fraction ◽  
Simple Algorithm ◽  
Systems Of Equations ◽  
Nusselt Numbers ◽  
Pressure Distributions ◽  
Nanoparticles Volume Fraction ◽  
Hybrid Nanofluids ◽  
Volume Method ◽  
Present Simulation

In the current work, the natural convection of dusty hybrid nanofluids in an enclosure including two inclined heated fins has been studied via mathematical simulation. The inclined heated fins are arranged near to the enclosure center with variations on their orientations and lengths. The present simulation is represented by two systems of equations for the hybrid nanofluids that are dusty. The pressure distributions for the dusty phase and hybrid nanofluids phase are evaluated using a SIMPLE algorithm based on the finite volume method. The numerical results are examined using contours of the streamlines, isotherms for the hybrid nanofluids and velocity components for the dusty phase. In addition, the graphical illustrations for profiles of the local and average Nusselt numbers are presented. The main results reveal that an increase in the mixture densities ratio and dusty parameter reduces the rate of the heat transfer. Both the local and average Nusselt numbers are supported as the fins lengths increase regardless of the fins’ rotation. In addition, the nanoparticles volume fraction enhances the thermal boundary layer near the top wall.

Second law analysis of magneto-natural convection in a nanofluid filled wavy-hexagonal porous enclosure

2020 ◽  
Vol 30 (11) ◽  
pp. 4811-4836 ◽  
Author(s):  
Seyyed Masoud Seyyedi ◽  
A.S. Dogonchi ◽  
M. Hashemi-Tilehnoee ◽  
D.D. Ganji ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Entropy Generation ◽  
Average Nusselt Number ◽  
Convection Heat Transfer ◽  
Natural Convection Heat Transfer ◽  
Content Type ◽  
Entropy Generation Number ◽  
Maximum Value ◽  
Generation Number

Purpose Natural convection heat transfer analysis can be completed using entropy generation analysis. This study aims to accomplish both the natural convection heat transfer and entropy generation analyses for a hexagonal cavity loaded with Cu-H2O nanoliquid subjected to an oriented magnetic field. Design/methodology/approach Control volume-based finite element method is applied to solve the non-dimensional forms of governing equations and then, the entropy generation number is computed. Findings The results portray that both the average Nusselt and entropy generation numbers boost with increasing aspect ratio for each value of the undulation number, while both of them decrease with increasing the undulation number for each amplitude parameter. There is a maximum value for the entropy generation number at a specified value of Hartmann number. Also, there is a minimum value for the entropy generation number at a specified value of angle of the magnetic field. When the volume fraction of nanoparticles grows, the average Nusselt number increases and the entropy generation number declines. The entropy generation number attains to a maximum value at Ha = 14 for each value of aspect ratio. The average Nusselt number ascends 2.9 per cent and entropy generation number decreases 1.3 per cent for Ha = 0 when ϕ increases from 0 to 4 per cent. Originality/value A hexagonal enclosure (complex geometry), which has many industrial applications, is chosen in this study. Not only the characteristics of heat transfer are investigated but also entropy generation analysis is performed in this study. The ecological coefficient of performance for enclosures is calculated, too.

Free convection of a hybrid nanofluid past a vertical plate embedded in a porous medium with anisotropic permeability

2019 ◽  
Vol 30 (8) ◽  
pp. 4083-4101 ◽  
Author(s):  
Aneela Bibi ◽  
Hang Xu ◽  
Qiang Sun ◽  
Ioan Pop ◽  
Qingkai Zhao
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Stability Analysis ◽  
Flat Surface ◽  
Saturated Porous Medium ◽  
Heat Energy ◽  
Hybrid Nanofluid ◽  
Anisotropic Permeability ◽  
Content Type ◽  
Hybrid Nanofluids

Purpose This study aims to carry out an analysis for flow and heat transfer of a new hybrid nanofluid over a vertical flat surface embedded in a saturated porous medium with anisotropic permeability at high Rayleigh number. Here the hybrid nanofluid is considered as the working fluid, with different kinds of small particles in nanoscale being suspended. Design/methodology/approach The generalized homogenous model is introduced to describe the behaviors of hybrid nanofluid. Within the framework of the boundary layer approximations, the governing equations embodying the conservation equations of total mass, momentum and thermal energy are reduced to a set of fully coupled ordinary differential equations via relevant scaling transformations. A flow stability analysis is performed to examine the behavior of convective heat energy. Accurate solutions are obtained by means of a very efficient homotopy-based package BVPh 2.0. Findings Results show that the linear correlations of physical quantities among the base fluid and its suspended nanoparticles are adequate to give accurate results for simulation of behaviors of hybrid nanofluids. Heat enhancement can be also fulfilled by hybrid nanofluids. A flow stability analysis suggests the heat-related power index m > −1/3 for satisfying the increasing behavior of convective heat energy. Originality/value Free convection of a hybrid nanofluid near a vertical flat surface embedded in a saturated porous medium with anisotropic permeability is investigated for the first time. The simplified hybrid nanofluid model is proposed for describing nanofluid behaviors. The results of this proposed approach agree well with those given by the traditional hybrid nanofluid model and experiment. It is expected that, by using different combinations of various kinds of nanoparticles, the new generation of heat transfer fluids can be fabricated, which possess similar thermal-physical properties as regular nanofluids but with lower cost.

scholarly journals Entropy Generation and Natural Convection Flow of Hybrid Nanofluids in a Partially Divided Wavy Cavity Including Solid Blocks

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2942 ◽  
Author(s):  
Ammar I. Alsabery ◽  
Ishak Hashim ◽  
Ahmad Hajjar ◽  
Mohammad Ghalambaz ◽  
Sohail Nadeem ◽  
...  
Keyword(s):  
Entropy Generation ◽  
Convection Flow ◽  
Hybrid Nanofluid ◽  
Bejan Number ◽  
The Finite Element Method ◽  
Governing Equations ◽  
Flow And Heat Transfer ◽  
Hybrid Nanofluids ◽  
Wavy Cavity ◽  
Rayleigh Numbers

The present investigation addressed the entropy generation, fluid flow, and heat transfer regarding Cu-Al 2 O 3 -water hybrid nanofluids into a complex shape enclosure containing a hot-half partition were addressed. The sidewalls of the enclosure are made of wavy walls including cold isothermal temperature while the upper and lower surfaces remain insulated. The governing equations toward conservation of mass, momentum, and energy were introduced into the form of partial differential equations. The second law of thermodynamic was written for the friction and thermal entropy productions as a function of velocity and temperatures. The governing equations occurred molded into a non-dimensional pattern and explained through the finite element method. Outcomes were investigated for Cu-water, Al 2 O 3 -water, and Cu-Al 2 O 3 -water nanofluids to address the effect of using composite nanoparticles toward the flow and temperature patterns and entropy generation. Findings show that using hybrid nanofluid improves the Nusselt number compared to simple nanofluids. In the case of low Rayleigh numbers, such enhancement is more evident. Changing the geometrical aspects of the cavity induces different effects toward the entropy generation and Bejan number. Generally, the global entropy generation for Cu-Al 2 O 3 -water hybrid nanofluid takes places between the entropy generation values regarding Cu-water and Al 2 O 3 -water nanofluids.

scholarly journals Free convection heat transfer of MgO-MWCNTs/EG hybrid nanofluid in a porous complex shaped cavity with MHD and thermal radiation effects

2019 ◽  
Vol 29 (11) ◽  
pp. 4349-4376 ◽  
Author(s):  
Mohammad Ghalambaz ◽  
Mahmoud Sabour ◽  
Ioan Pop ◽  
Dongsheng Wen
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Porous Medium ◽  
Complex Shape ◽  
Convection Heat Transfer ◽  
Hybrid Nanofluid ◽  
Convection Heat ◽  
Governing Equations ◽  
Content Type ◽  
Hybrid Nanofluids

Purpose The present study aims to address the flow and heat transfer of MgO-MWCNTs/EG hybrid nanofluid in a complex shape enclosure filled with a porous medium. The enclosure is subject to a uniform inclined magnetic field and radiation effects. The effect of the presence of a variable magnetic field on the natural convection heat transfer of hybrid nanofluids in a complex shape cavity is studied for the first time. The geometry of the cavity is an annular space with an isothermal wavy outer cold wall. Two types of the porous medium, glass ball and aluminum metal foam, are adopted for the porous space. The governing equations for mass, momentum and heat transfer of the hybrid nanofluid are introduced and transformed into non-dimensional form. The actual available thermal conductivity and dynamic viscosity data for the hybrid nanofluid are directly used for thermophysical properties of the hybrid nanofluid. Design/methodology/approach The governing equations for mass, momentum and heat transfer of hybrid nanofluid are introduced and transformed into non-dimensional form. The thermal conductivity and dynamic viscosity of the nanofluid are directly used from the experimental results available in the literature. The finite element method is used to solve the governing equations. Grid check procedure and validations were performed. Findings The effect of Hartmann number, Rayleigh number, Darcy number, the shape of the cavity and the type of porous medium on the thermal performance of the cavity are studied. The outcomes show that using the composite nanoparticles boosts the convective heat transfer. However, the rise of the volume fraction of nanoparticles would reduce the overall enhancement. Considering a convective dominant regime of natural convection flow with Rayleigh number of 107, the maximum enhancement ratio (Nusselt number ratio compared to the pure fluid) for the case of glass ball is about 1.17 and for the case of aluminum metal foam is about 1.15 when the volume fraction of hybrid nanoparticles is minimum as 0.2 per cent. Originality/value The effect of the presence of a variable magnetic field on the natural convection heat transfer of a new type of hybrid nanofluids, MgO-MWCNTs/EG, in a complex shape cavity is studied for the first time. The results of this paper are new and original with many practical applications of hybrid nanofluids in the modern industry.

scholarly journals Simulation of natural convection heat transfer using nanofluid in a concentric annulus

2017 ◽  
Vol 21 (3) ◽  
pp. 1275-1286 ◽  
Author(s):  
Keivan Fallah ◽  
Atena Ghaderi ◽  
Nima Sedaghatizadeh ◽  
Mohammad Borghei
Keyword(s):  
Natural Convection ◽  
Rayleigh Number ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Convection Heat Transfer ◽  
Thermal Characteristics ◽  
Width Ratio ◽  
Nusselt Numbers ◽  
Boltzmann Method ◽  
Gap Width

In the present study, natural convection of nanofluids in a concentric horizontal annulus enclosure has been numerically simulated using the lattice Boltzmann method. A water-based nanofluid containing Al2O3 nanoparticle has been studied. Simulations have been carried while the Rayleigh number ranges from 103 to 105 and solid volume fraction varies between 0 and 0.04. The effects of solid volume fraction of nanofluids on hydrodynamic and thermal characteristics such as average and local Nusselt numbers, streamlines, and isotherm patterns for different values of solid volume fraction, annulus gap width ratio and Rayleigh number are investigated and discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document