3D visualization of the fracture surface by the series of multilevel images

2020 ◽  
Vol 2020 (48) ◽  
pp. 79-85
Author(s):  
O.R. Berehulyak ◽  
◽  
R.A. Vorobel ◽  
I.B. Ivasenko ◽  
H.V. Krechkovska ◽  
...  

The method for visualization of details on the image of the still fracture surface of impact testing specimen on the base of the series of optical microscope images with the small focus depth is proposed. A series of images of a still object was obtained by successive change of the distance to focal plane with a certain fixed step. The local contrast maximum principle was applied to images in the sequence for construction of aggregated all-in-focus image. A level map was formed from the indexes of the image in the series, which at certain pixel indicates the most probable distance to the corresponding point of the object. The Chebyshev best approximation was used for estimation of the height of the relief to provide better 3-D visualization of a three-dimensional image of the fracture surface. The area of fracture surface was estimated by train-gulation of alpha shape.

2004 ◽  
Vol 12 (5) ◽  
pp. 46-49
Author(s):  
Nathan R. Greenhut ◽  
Victor A. Greenhut

SummaryFlicker stereo alternates two pictures (∼ 1 frame/sec.) of the same structure with views tilted 6° ± 1° about a vertical axis—Natural appearing stereo visualization results. A flicker stereo program to be used for viewing with a personal computer (PC) was developed by the authors. The two images are installed, adjusted for superposition and then alternated on the computer monitor or computer projection system. Flicker stereo can be applied to micrographs from the optical microscope, SEM, TEM, pictures or line drawings. Flicker stereo provides simultaneous three dimensional viewing for several individuals without special viewers, projection systems and/or glasses. Different flicker images may be retrieved and viewed on a PC in rapid succession. Flicker stereo facilitates technical discussion between collaborators and provides a convenient approach for 3D visualization by audiences using a digital LCD projection. The program is available to readers.


Metals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 25
Author(s):  
Zhiwei Wu ◽  
Maosheng Yang ◽  
Kunyu Zhao

The new generation of bearing steel has good comprehensive properties, which can satisfy most of the requirements of bearing steel in a complex environment. In the presented work, fatigue properties of 15Cr14Co12Mo5Ni2 bearing steel have been investigated by means of rotating bending fatigue tests on smooth bar specimens after carburization and heat treatment. Optical microscope, scanning electron microscopy, electron backscatter diffraction, and Image-Pro Plus software were used to analyze the fracture, microstructure, and carbides. The results suggest that the fatigue strength at room temperature and 500 °C is 1027 MPa and 585 MPa, respectively. Scanning electron micrographic observations on the fracture surface of the fatigue specimens at 500 °C show that fatigue cracks usually initiate from voids in the carburized case and oxide layer on the surface of steel. The failure mode in the carburized case is a quasi-cleavage fracture, and with the increase of crack propagation depth, the failure mode gradually changes to fatigue and creep-fatigue interaction. With the increase of the distance from the surface, the size of the martensite block decreases and the fracture surface shows great fluctuation.


2021 ◽  
Vol 7 (1) ◽  
pp. 540-555
Author(s):  
Hayley L. Mickleburgh ◽  
Liv Nilsson Stutz ◽  
Harry Fokkens

Abstract The reconstruction of past mortuary rituals and practices increasingly incorporates analysis of the taphonomic history of the grave and buried body, using the framework provided by archaeothanatology. Archaeothanatological analysis relies on interpretation of the three-dimensional (3D) relationship of bones within the grave and traditionally depends on elaborate written descriptions and two-dimensional (2D) images of the remains during excavation to capture this spatial information. With the rapid development of inexpensive 3D tools, digital replicas (3D models) are now commonly available to preserve 3D information on human burials during excavation. A procedure developed using a test case to enhance archaeothanatological analysis and improve post-excavation analysis of human burials is described. Beyond preservation of static spatial information, 3D visualization techniques can be used in archaeothanatology to reconstruct the spatial displacement of bones over time, from deposition of the body to excavation of the skeletonized remains. The purpose of the procedure is to produce 3D simulations to visualize and test archaeothanatological hypotheses, thereby augmenting traditional archaeothanatological analysis. We illustrate our approach with the reconstruction of mortuary practices and burial taphonomy of a Bell Beaker burial from the site of Oostwoud-Tuithoorn, West-Frisia, the Netherlands. This case study was selected as the test case because of its relatively complete context information. The test case shows the potential for application of the procedure to older 2D field documentation, even when the amount and detail of documentation is less than ideal.


2000 ◽  
Vol 6 (S2) ◽  
pp. 282-283
Author(s):  
Matthew Dougherty ◽  
Wah Chiu

Sophisticated tools are needed to examine the results of cyro-microscopy. As the size and resolution of three dimensional macromolecular structures steadily improve, and the speed at with which they can be generated increases, researchers are finding they are inundated with larger datasets and at the same time are compelled to expediently evaluate these structures in unforeseen ways. Integration of EM data with other types of information is becoming necessary and routine; for example X-ray data, 3D EM reconstructions, and theoretical models, must be evaluated in concert to discount or propose hypothesis. To create such tools, the developer must take into account not only the empirical and theoretical possibilities, but also they must master the human factors and computational limits. During the last five years, the National Center for Macromolecular Imaging (NCMI) has progressed from a remedial 3D visualization capability to a collection of visualization tools allowing researchers to focus on the discovery phase of biological research.


2020 ◽  
Vol 41 (Supplement_2) ◽  
Author(s):  
T Fujiwara ◽  
N Takeda ◽  
M Hatano ◽  
S Nishimura ◽  
I Komuro

Abstract Background Pulmonary hypertension (PH) is characterized by increased pulmonary vascular resistance and right heart failure with progressive narrowing or occlusion of the pulmonary artery. However, the assessment of vascular remodeling is mostly limited to averaged increases in wall thickening, and even the role of vascular endothelial growth factor (VEGF), remains incompletely understood; Although abundantly expressed VEGF is expected to elicit angio-obliteration and the knockout of hypoxia inducible factor (HIF) prevents PH in mice, VEGF inhibitor Sugen exacerbates hypoxia (Hx)-induced PH model, which is referred to as VEGF paradox. Purpose To analyze three-dimensional (3D) spatiotemporal changes of pulmonary microstructure and function, which reflect the disease activity and lead to resolve the paradox. Methods and results We developed a novel 3D visualization system of microstructural networks in whole mouse organ with single-cell resolution, using combined tissue clearing technique called CUBIC and multiphoton excitation microscope. The system enabled the simultaneous 3D evaluation of microvascular structure, invaded macrophages and fibrosis with effective penetration of several mm (whole organ). Three-dimensional observations of PH mice models including Hx, Sugen/Hx, and human-like Alk1+/− hereditary PH models, revealed that not only inward (negative) microvessel remodeling with stenosis, but also marked elongation of microvascular ECs, was evident except Sugen/Hx model at the early phase, which had not been detected by 2D histological sections. Comparable transcriptome analysis revealed that PGC1α, which regulates HIF-independent VEGF expression and angiogenesis, plays an important role in the characteristic response for mitochondrial and microvascular maintenance. PGC1α was up-regulated in the early phage in Hx and Alk1+/− PH models with microvascular angiogenetic change, whereas Sugen/Hx-model did not increase PGC1α expression and did not show microvascular remodeling. Furthermore pulmonary ECs-specific PGC1α-deficient mice exacerbated Hx-PH model with decreased VEGF expression and microvessel density, and administration of Baicalin, a flavonoid enhancing PGC1α expression, ameliorated Hx-PH model with increased VEGF expression. Conclusions The 3D visualization system disclosed an unexpected change of angiogenic microvascular structure in the early phage of PH, which is regulated by EC PGC1α. Microvascular angiogenesis which is induced by up-regulation in PGC1α -VEGF pathway is a crucial factor for compensation of PH in the early phase, which provides a potential novel therapeutic target for PH. Figure 1 Funding Acknowledgement Type of funding source: Public grant(s) – National budget only. Main funding source(s): JSJP


Author(s):  
Maria E. Currie ◽  
Ana Luisa Trejos ◽  
Reiza Rayman ◽  
Michael W.A. Chu ◽  
Rajni Patel ◽  
...  

Objective The purpose of this study was to determine the effect of three-dimensional (3D) binocular, stereoscopic, and two-dimensional (2D) monocular visualization on robotics-assisted mitral valve annuloplasty versus conventional techniques in an ex vivo animal model. In addition, we sought to determine whether these effects were consistent between novices and experts in robotics-assisted cardiac surgery. Methods A cardiac surgery test-bed was constructed to measure forces applied during mitral valve annuloplasty. Sutures were passed through the porcine mitral valve annulus by the participants with different levels of experience in robotics-assisted surgery and tied in place using both robotics-assisted and conventional surgery techniques. Results The mean time for both the experts and the novices using 3D visualization was significantly less than that required using 2D vision (P < 0.001). However, there was no significant difference in the maximum force applied by the novices to the mitral valve during suturing (P = 0.7) and suture tying (P = 0.6) using either 2D or 3D visualization. The mean time required and forces applied by both the experts and the novices were significantly less using the conventional surgical technique than when using the robotic system with either 2D or 3D vision (P < 0.001). Conclusions Despite high-quality binocular images, both the experts and the novices applied significantly more force to the cardiac tissue during 3D robotics-assisted mitral valve annuloplasty than during conventional open mitral valve annuloplasty. This finding suggests that 3D visualization does not fully compensate for the absence of haptic feedback in robotics-assisted cardiac surgery.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mechiel van Manen ◽  
Léon olde Scholtenhuis ◽  
Hans Voordijk

PurposeThis study aims to empirically validate five propositions about the benefits of three-dimensional (3D) visualizations for the management of subsurface utility projects. Specifically, the authors validate whether benefits from 3D in the literature of building construction project management also apply to subsurface utility projects and map them using a taxonomy of project complexity levels.Design/methodology/approachA multiple case study of three utility construction projects was carried out during which the first author was involved in the daily work practices at a utility contractor. 3D visualizations of existing project models were developed, and design and construction meetings were conducted. Practitioners' interactions with and reflections on these 3D visualizations were noted. Observational data from the three project types were matched with the five propositions to determine where benefits of 3D visualizations manifested themselves.FindingsPractitioners found that 3D visualizations had most merit in crowded urban environments when constructing rigid pipelines. All propositions were validated and evaluated as beneficial in subsurface utility projects of complexity level C3. It is shown that in urban projects with rigid pipelines (project with the highest complexity level), 3D visualization prevents misunderstanding or misinterpretations and increases efficiency of coordination. It is recommended to implement 3D visualization approaches in such complex projectsOriginality/valueThere is only limited evidence on the value 3D visualizations in managing utility projects. This study contributes rich empirical evidence on this value based on a six-month observation period at a subsurface contractor. Their merit was assessed by associating 3D approaches with project complexity levels, which may help utility contractors in strategically implementing 3D applications.


Sign in / Sign up

Export Citation Format

Share Document