scholarly journals Effect of plant density on growth and yield in Barraganete plantain (Musa paradisiaca (L.) AAB cv. Curare enano) for a single harvest cutting in Provincia de Los Ríos, Ecuador

2017 ◽  
Vol 66 (3) ◽  
pp. 367-372 ◽  
Author(s):  
Santiago Miguel Ulloa Cortazar ◽  
Erick Daniel Wolf ◽  
Ignacio Armendáriz González
Keyword(s):  
Los Angeles ◽  
Plant Density ◽  
Block Design ◽  
Logistic Models ◽  
Variance Analysis ◽  
Growth And Yield ◽  
Musa Paradisiaca ◽  
Tukey Test ◽  
Randomized Complete Block Design ◽  
Density Treatment

The optimum plant density in Barraganete plantain (Musa paradisiaca (L.) AAB cv. Curare enano) was determined in Los Angeles-Provincia de Los Ríos, Ecuador. Treatments (sowing distance: T1 = 3m x 4m, T2 = 3m x 3m, T3 = 3m x 2m, T4 = 3m x 1.5m and T5 = 3m x 1m), were evaluated in a randomized complete block design with five treatments and three replicates per treatment. The number of hands per cluster, hand weight, weeks to flowering, weeks to harvest, production for export and weed incidence in plantain crop, were evaluated. Variance analysis was performed and means were submitted to the Tukey test at 5% probability (p = 0.05). The optimum sowing distance was 2m between plants and 3m between rows. The best density was 1666 plants. ha-1 and obtained the best average hand weight (14.5 kg), the best average number of hands (4.9), the best average in weeks to harvest after flowering (12.1 Weeks) and the best production (kg.ha-1) of export bunches (close to 22 t.ha-1). Analysis with logistic models show the higher densities, which present advantages in their use, fact related to the increase of the annual plantain production. For this reason, values between 2150 and 2500 plants.ha-1 are postulated as optimal densities. Weed decreases with increasing plant density to a minimum of 227.94 g.m-2 in the highest plant density treatment. 

scholarly journals Effect of Plant Spacing on the Growth and Yield of Rainfed Rice (Oryza Sativa) in the Bimodal Rain Forest Zone of Cameroon

2021 ◽  
pp. 48-59
Author(s):  
Melie Feyem Marie-Noel ◽  
Bell Martin Joseph ◽  
Tanzi Liliane ◽  
Foncha Felix ◽  
Malaa Dorothy ◽  
...  
Keyword(s):  
Plant Density ◽  
Agricultural Research ◽  
Block Design ◽  
Growth And Yield ◽  
Forest Zone ◽  
Yield Increase ◽  
Rainfed Rice ◽  
Randomized Complete Block Design ◽  
Cropping Seasons ◽  
Number Of Seeds

A study was carried out on plant density at the experimental field of the Institute of Agricultural Research for Development (IRAD) Nkolbisson, Yaoundé to determine the appropriate spacing to improve rainfed rice production in the bimodal rainfall forest zone of Cameroon. The experiment was conducted during the main cropping seasons of 2017 and 2018. The planting spacing used were 15cm x 15cm, 20cm x 20cm, 25cm x 25cm and 30cm x 30cm giving the plant populations of 444444, 250000, 160,000 and 111,111 plants / ha respectively using two varieties (Nerica 3 and Nerica 8). The experiment was laid out in a randomized complete block design with three replications. Significant differences were observed in the growth and yield across the years. Treatments were highly significant concerning the number of days to the appearance of the first flower, the number of days to 50% flowering, and the number of days to 50 % maturity. Plants were taller with more tillers and gave higher yields in 2017 than those of 2018. The spacing significantly affected the plant height, number of tillers, and panicle length for both varieties. The interaction of spacing and variety was significant for the number of tillers per m2 and the number of seeds per panicle, however, it was not for the weight of 1000 grains and the percentage of full bales. The yield components determining yield increase were the number of panicles / m2 and the number of seeds/panicles. Nerica 3 variety gave higher yields compared to the Nerica 8, the closer the spacing, the higher the yield. There were a strong significance and positive correlation between yield, number of panicles, and the number of grain per panicle. The spacing that gives the highest number of panicle per m2 was 15 cm X 15 cm and this spacing gave good yield in the region where the study was carried out.

Response of corn (Zea mays L.) to various organic-based fertilizers in marginal upland of Sta. Rita, Samar

2017 ◽  
pp. 31-43
Author(s):  
Berta Ratilla ◽  
Loreme Cagande ◽  
Othello Capuno
Keyword(s):  
Block Design ◽  
Management Strategies ◽  
Chemical Properties ◽  
Organic Fertilizers ◽  
Growth And Yield ◽  
Physical And Chemical Properties ◽  
Total N ◽  
Randomized Complete Block Design ◽  
Physical And Chemical ◽  
And Chemical Properties

Organic farming is one of the management strategies that improve productivity of marginal uplands. The study aimed to: (1) evaluate effects of various organic-based fertilizers on the growth and yield of corn; (2) determine the appropriate combination for optimum yield; and (3) assess changes on the soil physical and chemical properties. Experiment was laid out in Randomized Complete Block Design, with 3 replications and 7 treatments, namely; T0=(0-0-0); T1=1t ha-1 Evans + 45-30-30kg N, P2O5, K2O ha-1; T2=t ha-1 Wellgrow + 45-30-30kg N, P2O5, K2O ha-1; T3=15t ha-1 chicken dung; T4=10t ha-1 chicken dung + 45-30-30kg N, P2O5, K2O ha-1; T5=15t ha-1 Vermicast; and T6=10t ha-1 Vermicast + 45-30-30kg N, P2O5, K2O ha-1. Application of organic-based fertilizers with or without inorganic fertilizers promoted growth of corn than the control. But due to high infestation of corn silk beetle(Monolepta bifasciata Horns), its grain yield was greatly affected. In the second cropping, except for Evans, any of these fertilizers applied alone or combined with 45-30-30kg N, P2O5, K2O ha-1 appeared appropriate in increasing corn earyield. Soil physical and chemical properties changed with addition of organic fertilizers. While bulk density decreased irrespective of treatments, pH, total N, available P and exchangeable K generally increased more with chicken dung application.

Canola seed yield and phenological responses to plant density

2016 ◽  
Vol 96 (1) ◽  
pp. 151-159 ◽  
Author(s):  
Gan Yantai ◽  
K. Neil Harker ◽  
H. Randy Kutcher ◽  
Robert H. Gulden ◽  
Byron Irvine ◽  
...  
Keyword(s):  
Seed Yield ◽  
Plant Density ◽  
Block Design ◽  
Positive Association ◽  
High Yield ◽  
Western Canada ◽  
Flowering Period ◽  
Canola Seed ◽  
Randomized Complete Block Design ◽  
Plant Densities

Optimal plant density is required to improve plant phenological traits and maximize seed yield in field crops. In this study, we determined the effect of plant density on duration of flowering, post-flowering phase, and seed yield of canola in diverse environments. The field study was conducted at 16 site-years across the major canola growing area of western Canada from 2010 to 2012. The cultivar InVigor® 5440, a glufosinate-resistant hybrid, was grown at five plant densities (20, 40, 60, 80, and 100 plants m−2) in a randomized complete block design with four replicates. Canola seed yield had a linear relationship with plant density at 8 of the 16 site-years, a quadratic relationship at 4 site-years, and there was no correlation between the two variables in the remaining 4 site-years. At site-years with low to medium productivity, canola seed yield increased by 10.2 to 14.7 kg ha−1 for every additional plant per square metre. Averaged across the 16 diverse environments, canola plants spent an average of 22% of their life cycle flowering and another 27% of the time filling seed post-flowering. Canola seed yield had a negative association with duration of flowering and a positive association with the days post-flowering but was not associated with number of days to maturity. The post-flowering period was 12.7, 14.7, and 12.6 d (or 55, 68, and 58%) longer in high-yield experiments than in low-yield experiments in 2010, 2011, and 2012, respectively. We conclude that optimization of plant density for canola seed yield varies with environment and that a longer post-flowering period is critical for increasing canola yield in western Canada.

scholarly journals Hill drop sowing of soybean with different number of plants per hole

2018 ◽  
Vol 48 (5) ◽  
Author(s):  
Esmael Lopes dos Santos ◽  
Victor José Agassi ◽  
Alessandro Sartor Chicowski ◽  
Julio Cezar Franchini ◽  
Henrique Debiasi ◽  
...  
Keyword(s):  
Plant Density ◽  
Block Design ◽  
Agronomic Performance ◽  
Soybean Cultivars ◽  
Lack Of Information ◽  
Cropping Season ◽  
Randomized Complete Block Design ◽  
Cropping Seasons

ABSTRACT: In the last few cropping seasons, some soybean producers have tested the application of a hill drop sowing method, usually from three to four seeds every 30 to 40cm. However, there is a lack of information in the literature about the effect of this practice on soybean performance. Thus, the objective of this study was to evaluate the effect of a hill drop sowing with different number of plants per hole on soybean performance. The study was conducted in Londrina - PR, Brazil, during the 2013/14, 2014/15 and 2016/17 cropping seasons. The experiment was a randomized complete block design with four replications and a 2x5 factorial scheme. The first factor consisted of two soybean cultivars, BRS 359RR and NK 7059RR analyzed in the first two cropping seasons and BRS 359RR and BRS 1010IPRO in the last cropping season. The second factor was constituted by five in-hill hole-spacing treatments (HS) (8, 16, 24, 32 and 40cm), with rows spaced 50cm apart. To maintain the same plant density in all treatments (270,000 plants ha-1), sowing was performed manually, being then thinned out. After thinning, the distribution was one plant per hole at HS8, 2 plants at HS16, 3 plants at HS24, 4 plants at HS32, and 5 plants at HS40. The agronomic performance of soybean in hill drop sowing with different number of plants per hole is similar to that of an equidistant distribution of plants.

Physiological attributes of mungbean (Vigna radiata L.) influenced by different sources of nutrients (NPK) in Madhupur tract region of Bangladesh

2021 ◽  
Vol 11 (01) ◽  
pp. 736-748
Author(s):  
M. M. Hossain ◽  
◽  
S. Yesmin ◽  
M. Z. Islam ◽  
M. A. Hossain ◽  
...  
Keyword(s):  
Plant Growth ◽  
Seed Yield ◽  
Block Design ◽  
Growth And Yield ◽  
Higher Plant ◽  
Npk Fertilizers ◽  
Straw Yield ◽  
Combined Application ◽  
Randomized Complete Block Design ◽  
Different Sources

An experiment was conducted at the Sher-e-Bangla Agricultural University farm from April to June 2017 in Kharif season to evaluate the performance of two mungbean varieties under different NPK fertilizers doses in field conditions. The experiment was laid out in Randomized Complete Block Design (RCBD), comprising six treatments with three replications. In the experiment, varieties used were BARI mung-6 and BARI mung-5 and the combination of the treatment were T0 = (control), T1 (10-40-25 NPK kg ha-1), T2 (10-60-45 NPK kg ha-1), T3 (20-50-35 NPK kg ha-1), T4 (30-40-25 NPK kg ha-1) and T5 (30-40-45 NPK kg ha-1), respectively. Mungbean cultivars responded noticeably to the supplementary NPK fertilizers as the crop characters were significantly influenced by different levels of NPK fertilizers. Data were recorded on plant height, leaves plant-1, branches plant-1, pods plant-1, seeds pod-1, 1000-seed weight, seed, and straw yield at different days after sowing. Of the two varieties, BARI mung-6 gave the highest seed yield (1.72 t ha-1) next to the higher plant growth and straw yield On the contrary, BARI mung-5 cultivar produced the lowest seed yield (1.57t ha-1), plant growth, and straw yield. The results showed that T3 (20-50-35 NPK kg ha-1) treatment was the best treatment as regards plant growth and yield parameters. The highest seed yield was produced by treated plot T3 (20-50-35 NPK kg ha-1) over the untreated control plot, T1, T2, T4, and T5, respectively. As for the combined effect, V1T3 (BARI mung-6 and T3 = 20kg N + 50kg P + 35kg K ha-1) performed the best results in all growth and development characters. Therefore, the combined application of 20-50-35 kg NPK ha-1 might be considered to be found optimal to get a considerable seed yield of mungbean variety BARI mung-6.

scholarly journals Drip irrigation in coffee crop under different planting densities: Growth and yield in southeastern Brazil

2014 ◽  
Vol 18 (11) ◽  
pp. 1116-1123 ◽  
Author(s):  
Gleice A. de Assis ◽  
Myriane S. Scalco ◽  
Rubens J. Guimarães ◽  
Alberto Colombo ◽  
Anderson W. Dominghetti ◽  
...  
Keyword(s):  
Plant Density ◽  
Block Design ◽  
Irrigation Management ◽  
Growth And Yield ◽  
Southeastern Brazil ◽  
Soil Water Tension ◽  
Randomized Block Design ◽  
Coffee Plants ◽  
Coffee Cultivation ◽  
Water Tension

Irrigation associated to reduction on planting spaces between rows and between coffee plants has been a featured practice in coffee cultivation. The objective of the present study was to assess, over a period of five consecutive years, influence of different irrigation management regimes and planting densities on growth and bean yield of Coffea arabica L.. The treatments consisted of four irrigation regimes: climatologic water balance, irrigation when the soil water tension reached values close to 20 and 60 kPa; and a control that was not irrigated. The treatments were distributed randomly in five planting densities: 2,500, 3,333, 5,000, 10,000 and 20,000 plants ha-1. A split-plot in randomized block design was used with four replications. Irrigation promoted better growth of coffee plants and increased yield that varied in function of the plant density per area. For densities from 10,000 to 20,000 plants ha-1, regardless of the used irrigation management, mean yield increases were over 49.6% compared to the non-irrigated crop.

scholarly journals EFFECT OF TRINEXAPAC-ETHYL ON GROWTH AND YIELD OF SUGARCANE

2015 ◽  
Vol 33 (3) ◽  
pp. 491-497
Author(s):  
A. T. FARIA ◽  
E. A. FERREIRA ◽  
P. R. R. ROCHA ◽  
D. V. SILVA ◽  
A. A. SILVA ◽  
...  
Keyword(s):  
Plant Growth ◽  
Growth Regulators ◽  
Plant Growth Regulator ◽  
Block Design ◽  
Growth And Yield ◽  
Bud Burst ◽  
Root Volume ◽  
Factor B ◽  
Randomized Complete Block Design ◽  
Sugarcane Yield

ABSTRACT Growth regulators can be used to further retard or inhibit vegetative growth. In this sense, the objective of this study was to determine the effects of age and number of trinexapac-ethyl applications on the growth and yield of sugarcane. The experiment was in a randomized complete block design with four replications. The treatments were in a 3 x 2 + 2 factorial arrangement, where factor A corresponded to the application times of the plant growth regulator (120, 200 and 240 days after bud burst (DAB) of sugarcane) and factor B to the number of applications (one or two applications). In addition, two controls (one with three applications and another application without the regulator) were added. The application of trinexapac-ethyl decreased the number and the distance between buds, height, root volume and sugarcane yield. The sequential application (2 or 3 times) induced an increase in stem diameter and three applications of the product increased the number of plant tillers. The use of growth regulators applied at 240 DAB has reduced plant height, however without changing the number of buds. It can be concluded that trinexapac-ethyl changes sugarcane growth and yield, regardless of season and number of applications.

scholarly journals Effect of Zinc and Boron on Growth and Yield of Okra (Abelmoschus esculentus L.)

2020 ◽  
pp. 41-47
Author(s):  
Nusrat Jahan ◽  
Md. Ashabul Hoque ◽  
Md. Rasal-Monir ◽  
Sumya Fatima ◽  
Mohammad Nurul Islam ◽  
...  
Keyword(s):  
Dry Matter ◽  
Block Design ◽  
Fruit Weight ◽  
Fruit Yield ◽  
Growth And Yield ◽  
Area Index ◽  
Spad Value ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Fruit Diameter

The study was carried out to find out the effect of zinc (Zn) and boron (B) on growth and yield of okra (BARI Dherosh 1). The experiment was laid out in Randomized Complete Block Design (RCBD) with three replications. The treatments of the experiment were, T0 (without Zn or B), T1 (20 kg Zn ha-1), T2 (30 kg Zn ha-1), T3 (10 kg B ha-1), T4 (20 kg B ha-1), T5 (20 kg Zn ha-1 + 10 kg B ha-1), T6 (20 kg Zn ha-1 + 20 kg B ha-1), T7 (30 kg Zn ha-1 + 10 kg B ha-1) and T8 (30 kg Zn ha-1 + 20 kg B ha-1) were undertaken to evaluate the best results of the study. The highest plant height was found in T8 (30 kg Zn ha-1 + 20 kg B ha-1) but the highest number of leaves plant-1 was recorded from T7 (30 kg Zn ha-1 + 10 kg B ha-1). On the other hand, the maximum leaf area index, SPAD value, mean fruit weight, fruit length, fruit diameter, fruit dry matter (%), number of fruits plant-1, fresh fruit weight plant-1 , fruit yield plot-1 and fruit yield ha-1 were found in T7 (30 kg Zn ha-1 + 10 kg B ha-1), while the control (T0) showed lowest performance for the respected parameters. It is strongly concluded that 30 kg Zn ha-1 with 10 kg B ha-1 combination may be helpful for okra cultivation in the field level to increase okra production.

scholarly journals Effect of Seeding Rate On Growth And Yield Of Okra (Abelmoschus Esculantus) In Zuru Northern Guinea Savanna Of Nigeria

2018 ◽  
Vol 6 (02) ◽  
Author(s):  
Yohanna J, A. ◽  
Muhammad A, M.
Keyword(s):  
Block Design ◽  
Total Yield ◽  
Growth And Yield ◽  
Land Resource ◽  
Seeding Rate ◽  
Randomized Complete Block Design ◽  
Number Of Leaves ◽  
Resource Space ◽  
Plant Stand ◽  
The Mean

Field experiment was carried out during 2010 rainy season to find the effect of seeding rate on the growth and yield of okra (Abelmuschus esculentus) in Zuru Northern Guinea Savannah. Zuru is located in Zuru Local government area of Kebbi State (Latitude 11o 251 to 11o 551 North and Longitude 4o 51 to 5o 251 East of the equator). The experiment consisted of three treatments that is planting okra at one plant per stand (S1), two plants per stand (S2) and three plants per stand (S3). The experiment was laid out in randomized complete block design (RCBD) and the treatments replicated three time. The result of the experiment has shown that plant height and number of leaves/plant at 3, 6 and 9 weeks after planting (    WAP) were significantly influenced by seeding rate (P<0.05). At 3, 6 and 9 WAP tallest plants were obtained from okra plants planted at three plants/stand (27.83, 54.0 and 77.0cm) respectively followed by okra planted at two plant/stand (24.77, 50.67 and 74.33 leave/plant respectively ). However, more number of leaves/plant were obtained from okra plant at one plant/stand (9.67, 24.67 and 48.0 leaves/plant respectively) followed by okra planted at two plants/stand (8.33, 18.33 and 36.33 leaves/plant respectively). Seeding rate had significant influence on time of 50 percent flowering with one plant/stand first attaining 50 percent flowering stage just within 36.33 days followed by okra planted at two plants/stand (38 days). The mean fresh fruit yield of okra was also significantly influenced by seeding rate with the highest yield of fresh fruits obtained from three plants/stand (83.34/ha) followed by okra planted at two plants/stand (55.56/ha). However, the result of the findings recommends that, okra should be planted at two plants/stand for medium sized and marketable okra fresh fruits since at three plants/stand leads to the production of undersized fresh fruits which do not often attract customers. At one plant/stand, there seemed to be early fruiting and bigger sized fresh fruits but low total yield due to underutilization of land resource/space. Planting at one plant/stand should therefore be avoided

scholarly journals GROWTH AND YIELD EVALUATION OF MUSTARD VARIETIES GROWN IN A MEDIUM HIGHLAND OF KHULNA REGION

2021 ◽  
Vol 18 (1) ◽  
pp. 1-8
Keyword(s):  
Seed Weight ◽  
Harvest Index ◽  
Block Design ◽  
Growth Yield ◽  
Growth And Yield ◽  
Rabi Season ◽  
Yield Attributes ◽  
Randomized Complete Block Design ◽  
Stover Yield ◽  
Number Of Seeds

The present research was conducted at the experimental field of Agrotechnology Discipline, Khulna University, Khulna during Rabi season 2016-17 to investigate the growth and yield performance of mustard varieties. The experiment was arranged in a randomized complete block design consisting of eight mustard varieties (viz. BARI Sarisha-8, BARI Sarisha-11, BARI Sarisha-13, BARI Sarisha-14, BARI Sarisha-15, BARI Sarisha-16, Rai and Tori-7) as treatment and replicated thrice. All the growth, yield attributes and yield were substantially influence among the mustard varieties except the phenological parameters. Results of the experiment showed that the highest plant height (131.33 cm), seed yield (1813.33 kg ha-1) and stover yield (3876.67 kg ha-1) were found in BARI Sarisha-16. BARI Sarisha-11 was found better in respect of maximum siliqua plant-1, weight of seeds plant-1, 1000-seed weight and harvest index. Besides this, BARI Sarisha-14 showed the maximum number of seeds siliqua-1. Therefore, findings of this study suggested that BARI Sarisha-16 would be suitable for better productivity and recommended for cultivation in the medium highland of Khulna region of Bangladesh.

Sign in / Sign up

Export Citation Format

Share Document