Mapping Population Distribution in Urban Areas: Using Sentinel-2A in Comparison with Landsat 8

The accurate and efficient extraction of urban areas is of great significance for better understanding of urban sprawl, built environment, economic activities, and population distribution. Night-Time Light (NTL) data have been widely used to extract urban areas. However, most of the existing NTL indexes are incapable of identifying non-luminous built-up areas. The high-resolution NTL imagery derived from the Luojia 1-01 satellite, with low saturation and the blooming effect, can be used to map urban areas at a finer scale. A new urban spectral index, named the Modified Normalized Urban Areas Composite Index (MNUACI), improved upon the existing Normalized Urban Areas Composite Index (NUACI), was proposed in this study, which integrated the Human Settlement Index (HSI) generated from Luojia 1-01 NTL data, the Normalized Difference Vegetation Index (NDVI) from Landsat 8 imagery, and the Modified Normalized Difference Water Index (MNDWI). Our results indicated that MNUACI improved the spatial variability and differentiation of urban components by eliminating the NTL blooming effect and increasing the variation of the nighttime luminosity. Compared to urban area classification from Landsat 8 data, the MNUACI yielded better accuracy than NTL, NUACI, HSI, and the EVI-Adjusted NTL Index (EANTLI) alone. Furthermore, the quadratic polynomial regression analysis showed the model based on MNUACI had the best R2 and Root-Mean Square Error (RMSE) compared with NTL, NUACI, HSI, and EANTLI in terms of estimation of impervious surface area. It is concluded that MNUACI could improve the identification of urban areas and non-luminous built-up areas with better accuracy.

Download Full-text

Estimating Visible Band Albedo from Aerial Orthophotographs in Urban Areas

Remote Sensing ◽

10.3390/rs14010164 ◽

2021 ◽

Vol 14 (1) ◽

pp. 164

Author(s):

Jaroslav Hofierka ◽

Katarína Onačillová

Keyword(s):

High Resolution ◽

Land Cover ◽

Urban Areas ◽

Landsat 8 ◽

Visible Band ◽

Energy Models ◽

Complex Morphology ◽

Gis Tools ◽

Satellite Sensors ◽

Sentinel 2A

Albedo is an important parameter in many environmental and renewable energy models. Satellite sensors can be used to derive broadband or narrowband albedos. However, the spatial resolution of such data can be insufficient in urban areas with complex morphology and land cover diversity. In this study, we propose the use of widely available aerial orthophotographs to derive visible band albedo in urban surfaces that can be effectively used in high-resolution applications. The solution is based on the estimation of the reflected irradiance captured by an RGB sensor and approximated by the brightness component in the hue-saturation-brightness (HSB) color model and incident solar irradiance modelled by the r.sun module in GRASS GIS. The visible band albedo values are calibrated by published reference values for selected land cover classes or, alternatively, by a spectroradiometer. The method is applied to the central part of Košice and compared to visible band albedo derived from the Landsat 8 OLI and Sentinel 2A sensors and previously published typical albedo values for various land cover classes, resulting in reasonable agreement. The proposed methodology is implemented using standard GIS tools that are easily applicable to any high-resolution urban data.

Download Full-text

Spatial-Temporal Land Use and Land Cover Changes in Urban Areas Using Remote Sensing Images and GIS Analysis: The Case Study of Opole, Poland

Geosciences ◽

10.3390/geosciences11080312 ◽

2021 ◽

Vol 11 (8) ◽

pp. 312

Author(s):

Barbara Wiatkowska ◽

Janusz Słodczyk ◽

Aleksandra Stokowska

Keyword(s):

Remote Sensing ◽

Land Use ◽

Land Cover ◽

Satellite Imagery ◽

Urban Areas ◽

Agricultural Land ◽

Urban Expansion ◽

Landsat 8 ◽

Rate Of Increase ◽

Management Procedures

Urban expansion is a dynamic and complex phenomenon, often involving adverse changes in land use and land cover (LULC). This paper uses satellite imagery from Landsat-5 TM, Landsat-8 OLI, Sentinel-2 MSI, and GIS technology to analyse LULC changes in 2000, 2005, 2010, 2015, and 2020. The research was carried out in Opole, the capital of the Opole Agglomeration (south-western Poland). Maps produced from supervised spectral classification of remote sensing data revealed that in 20 years, built-up areas have increased about 40%, mainly at the expense of agricultural land. Detection of changes in the spatial pattern of LULC showed that the highest average rate of increase in built-up areas occurred in the zone 3–6 km (11.7%) and above 6 km (10.4%) from the centre of Opole. The analysis of the increase of built-up land in relation to the decreasing population (SDG 11.3.1) has confirmed the ongoing process of demographic suburbanisation. The paper shows that satellite imagery and GIS can be a valuable tool for local authorities and planners to monitor the scale of urbanisation processes for the purpose of adapting space management procedures to the changing environment.

Download Full-text

Modeling Spatiotemporal Population Changes by Integrating DMSP-OLS and NPP-VIIRS Nighttime Light Data in Chongqing, China

Remote Sensing ◽

10.3390/rs13020284 ◽

2021 ◽

Vol 13 (2) ◽

pp. 284

Author(s):

Dan Lu ◽

Yahui Wang ◽

Qingyuan Yang ◽

Kangchuan Su ◽

Haozhe Zhang ◽

...

Keyword(s):

Spatial Distribution ◽

Relative Error ◽

Urban Areas ◽

Large Scale ◽

Population Distribution ◽

Spatial Optimization ◽

Distribution Data ◽

Mountainous Areas ◽

Mean Relative Error ◽

Nighttime Light

The sustained growth of non-farm wages has led to large-scale migration of rural population to cities in China, especially in mountainous areas. It is of great significance to study the spatial and temporal pattern of population migration mentioned above for guiding population spatial optimization and the effective supply of public services in the mountainous areas. Here, we determined the spatiotemporal evolution of population in the Chongqing municipality of China from 2000–2018 by employing multi-period spatial distribution data, including nighttime light (NTL) data from the Defense Meteorological Satellite Program’s Operational Linescan System (DMSP-OLS) and the Suomi National Polar-orbiting Partnership Visible Infrared Imaging Radiometer Suite (NPP-VIIRS). There was a power function relationship between the two datasets at the pixel scale, with a mean relative error of NTL integration of 8.19%, 4.78% less than achieved by a previous study at the provincial scale. The spatial simulations of population distribution achieved a mean relative error of 26.98%, improved the simulation accuracy for mountainous population by nearly 20% and confirmed the feasibility of this method in Chongqing. During the study period, the spatial distribution of Chongqing’s population has increased in the west and decreased in the east, while also increased in low-altitude areas and decreased in medium-high altitude areas. Population agglomeration was common in all of districts and counties and the population density of central urban areas and its surrounding areas significantly increased, while that of non-urban areas such as northeast Chongqing significantly decreased.

Download Full-text

Non-Binary Snow Index for Multi-Component Surfaces

Remote Sensing ◽

10.3390/rs13142777 ◽

2021 ◽

Vol 13 (14) ◽

pp. 2777

Author(s):

Mario Arreola-Esquivel ◽

Carina Toxqui-Quitl ◽

Maricela Delgadillo-Herrera ◽

Alfonso Padilla-Vivanco ◽

Gabriel Ortega-Mendoza ◽

...

Keyword(s):

Spectral Characteristics ◽

Ice Cover ◽

Landsat 8 ◽

Water Index ◽

Bare Land ◽

Snow Water ◽

Precision Assessment ◽

Normalized Difference Snow Index ◽

Sentinel 2A ◽

Water Vegetation

A Non-Binary Snow Index for Multi-Component Surfaces (NBSI-MS) is proposed to map snow/ice cover. The NBSI-MS is based on the spectral characteristics of different Land Cover Types (LCTs), such as snow, water, vegetation, bare land, impervious, and shadow surfaces. This index can increase the separability between NBSI-MS values corresponding to snow from other LCTs and accurately delineate the snow/ice cover in non-binary maps. To test the robustness of the NBSI-MS, regions in Greenland and France–Italy where snow interacts with highly diversified geographical ecosystems were examined. Data recorded by Landsat 5 TM, Landsat 8 OLI, and Sentinel-2A MSI satellites were used. The NBSI-MS performance was also compared against the well-known Normalized Difference Snow Index (NDSI), NDSII-1, S3, and Snow Water Index (SWI) methods and evaluated based on Ground Reference Test Pixels (GRTPs) over non-binarized results. The results show that the NBSI-MS achieved an overall accuracy (OA) ranging from 0.99 to 1 with kappa coefficient values in the same range as the OA. The precision assessment confirmed the performance superiority of the proposed NBSI-MS method for removing water and shadow surfaces over the compared relevant indices.

Download Full-text

A Modified Bare Soil Index to Identify Bare Land Features during Agricultural Fallow-Period in Southeast Asia Using Landsat 8

Land ◽

10.3390/land10030231 ◽

2021 ◽

Vol 10 (3) ◽

pp. 231

Author(s):

Can Trong Nguyen ◽

Amnat Chidthaisong ◽

Phan Kieu Diem ◽

Lian-Zhi Huo

Keyword(s):

Remote Sensing ◽

Land Cover ◽

Urban Areas ◽

Near Infrared ◽

Urban Landscape ◽

Bare Soil ◽

Critical Element ◽

Landsat 8 ◽

Climate Conditions ◽

Fallow Period

Bare soil is a critical element in the urban landscape and plays an essential role in urban environments. Yet, the separation of bare soil and other land cover types using remote sensing techniques remains a significant challenge. There are several remote sensing-based spectral indices for barren detection, but their effectiveness varies depending on land cover patterns and climate conditions. Within this research, we introduced a modified bare soil index (MBI) using shortwave infrared (SWIR) and near-infrared (NIR) wavelengths derived from Landsat 8 (OLI—Operational Land Imager). The proposed bare soil index was tested in two different bare soil patterns in Thailand and Vietnam, where there are large areas of bare soil during the agricultural fallow period, obstructing the separation between bare soil and urban areas. Bare soil extracted from the MBI achieved higher overall accuracy of about 98% and a kappa coefficient over 0.96, compared to bare soil index (BSI), normalized different bare soil index (NDBaI), and dry bare soil index (DBSI). The results also revealed that MBI considerably contributes to the accuracy of land cover classification. We suggest using the MBI for bare soil detection in tropical climatic regions.

Download Full-text

Predicting Aedes aegypti infestation using landscape and thermal features

Scientific Reports ◽

10.1038/s41598-020-78755-8 ◽

2020 ◽

Vol 10 (1) ◽

Author(s):

Camila Lorenz ◽

Marcia C. Castro ◽

Patricia M. P. Trindade ◽

Maurício L. Nogueira ◽

Mariana de Oliveira Lage ◽

...

Keyword(s):

Remote Sensing ◽

Aedes Aegypti ◽

Vector Control ◽

Land Surface ◽

Urban Areas ◽

Negative Binomial ◽

Control Strategies ◽

Winter Season ◽

Landsat 8 ◽

Thermal Features

AbstractIdentifying Aedes aegypti breeding hotspots in urban areas is crucial for the design of effective vector control strategies. Remote sensing techniques offer valuable tools for mapping habitat suitability. In this study, we evaluated the association between urban landscape, thermal features, and mosquito infestations. Entomological surveys were conducted between 2016 and 2019 in Vila Toninho, a neighborhood of São José do Rio Preto, São Paulo, Brazil, in which the numbers of adult female Ae. aegypti were recorded monthly and grouped by season for three years. We used data from 2016 to 2018 to build the model and data from summer of 2019 to validate it. WorldView-3 satellite images were used to extract land cover classes, and land surface temperature data were obtained using the Landsat-8 Thermal Infrared Sensor (TIRS). A multilevel negative binomial model was fitted to the data, which showed that the winter season has the greatest influence on decreases in mosquito abundance. Green areas and pavements were negatively associated, and a higher cover of asbestos roofs and exposed soil was positively associated with the presence of adult females. These features are related to socio-economic factors but also provide favorable breeding conditions for mosquitos. The application of remote sensing technologies has significant potential for optimizing vector control strategies, future mosquito suppression, and outbreak prediction.

Download Full-text