EXPERIMENTAL STUDY OF THE KINEMATIC PARAMETERS OF MOVEMENT OF CARS FORCED IDLE MOTION

2018 ◽  
pp. 52-57
Author(s):  
Ivelin Kostov
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Experimental Research ◽  
Kinematic Parameters ◽  
Research Results ◽  
Software Product

In the work brought some experimental data of kinematic parameters of movement of cars forced idle, as the software product was used to diagnose 900 ATS, which recorded kinematic parameters of vehicle. On the basis of the conducted experimental research results are shown tabulated and analysed.

Highly Elastic Corrugated Cardboard and its Experimental Study on Strength Properties

2013 ◽  
Vol 469 ◽  
pp. 217-220
Author(s):  
Chun Ying Fu ◽  
Dong Sheng Jiang
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Strength Properties ◽  
Production Methods ◽  
Research Results ◽  
Actual Production ◽  
Corrugated Cardboard

In order to overcome weaknesses of the limited strength of the traditional corrugated cardboard, and the corrugated cardboard with alternative high and low corrugated sandwich cores was developed by someone, named highly elastic corrugated cardboard. The highly elastic corrugated cardboard has excellent rebound properties of cushioning . On the existing research results, according to Wang Dong-mei development of its production methods, the author can product highly elastic corrugated cardboard in the laboratory in order to study its Strength properties. These experimental data provide a basis for actual production.

The experimental research results of the influence of the shape of the contact surface of the basement to the deformable subgrade.

2016 ◽  
Vol 4 (2) ◽  
pp. 0-0
Author(s):  
Юлия Наумкина ◽  
Ulia Naumkina ◽  
Яков Пронозин ◽  
Yakov Pronozin ◽  
Дмитрий Рачков ◽  
...  
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Experimental Research ◽  
Contact Surface ◽  
Soil Deformation ◽  
Lateral Compression ◽  
The Core ◽  
Modulus Of Deformation ◽  
Deformed State ◽  
Core Base

The article presents the analysis of the results of field experimental study of the effect of the contact surface forms of the foundation on the deformability of subgrade. Experimental data show peculiarities of intensely deformed state of subgrade loaded on a curved concave contact surface. Stiffening of the base in this case is due to higher modulus of deformation of soil deformation in the core base, due to the additional lateral compression of soil, relating to a form of the contact surface.

Numerical Simulation and Experimental Research on Fatigue Strength of the Injector Guide Pillar under Complex Loads

2010 ◽  
Vol 118-120 ◽  
pp. 196-200
Author(s):  
Jin Guo Li ◽  
Xiao Gui Wang ◽  
Zeng Liang Gao
Keyword(s):  
Experimental Data ◽  
Mechanical Properties ◽  
Numerical Simulation ◽  
Experimental Study ◽  
Fatigue Life ◽  
Fatigue Strength ◽  
Numerical Analysis ◽  
Experimental Research ◽  
Contact Surface ◽  
Electronic Measurement

Under the complex loads, the injector guide pillar (IGP) used in injection machine was failure only after 1.5-year-service. In order to determine the cause of the fracture, the numerical simulation technology was applied to analyze the mechanical properties of the IGP. The contact between the mating surfaces of the clamping mechanism was modeled; nonlinear multi-region contact of surface-surface was applied to establish the contact model of FEA. The constraint of tie was used for modeling thread joint. The simulated results indicated that the smaller area of contact surface, the higher value of stress in the neck of IGP. Electronic measurement was also used to check the results of stress in IGP obtained by FEA. It was found that the experimental data agreed well with simulated results. Based on the numerical analysis and experimental study, the structure of IGP was improved by adopting a smoother double-round neck. The fatigue life of the improved structure was longer than that of the original machine.

scholarly journals Experimental Research on C60 Concrete Strength Evolution under Different Curing Conditions

2020 ◽  
Vol 198 ◽  
pp. 01002
Author(s):  
Zhu Ran ◽  
Xu Jun ◽  
Zhan Yijian ◽  
Zuo Zibo ◽  
Zhou Xiangyang ◽  
...  
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Compressive Strength ◽  
Experimental Research ◽  
Concrete Strength ◽  
Functional Relation ◽  
Maturity Models ◽  
Curing Conditions ◽  
Under Five ◽  
Strength Evolution

An experimental study on the C60 concrete was carried out under five different curing conditions based on the maturity theory. The influence patterns of the curing conditions on the increase of the C60 concrete strength were discussed. The experimental data were fitted using different strength-maturity models, the accuracies of which were then analyzed. The results show that the mapping relation between the compressive strength and maturity of the C60 concrete could be well characterized by the logarithmic functional relation.

Improvement of Stamping by Rolling Processes of Pipe and Cylindrical Blades on Experimental Research

2020 ◽  
Vol 844 ◽  
pp. 168-181
Author(s):  
Andrii Shtuts ◽  
Mykola Kolisnyk ◽  
Andrii Vydmysh ◽  
Oleksandr Voznyak ◽  
Serhii Baraban ◽  
...  
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Mathematical Models ◽  
Experimental Research ◽  
Lateral Surface ◽  
Side Surface

During the experimental study, a pronounced beating and sealing of the side surface of the tubular, cylindrical blanks was recorded. It is established that cracks appear and develop in the central part of the lateral surface, i.e., it are destroyed. This fact confirms the claim that the destruction of tubular, cylindrical blanks of some materials begins on the side surface. It is established that the bases of analytical dependencies between the components of deformations describe the obtained results of the experimental study of SR tubular, cylindrical blanks within the error of the experimental data, which made it possible to construct a number of mathematical models for the purpose of further study of the SDS and the method of their determination.

The Stress Analysis and Experimental Research of Tubular K-Joints With Overlap

1987 ◽  
Vol 109 (4) ◽  
pp. 375-380
Author(s):  
Tie-yun Chen ◽  
Wei-min Chen
Keyword(s):  
Experimental Data ◽  
Stress Concentration ◽  
Variational Method ◽  
Stress Analysis ◽  
Experimental Research ◽  
Hot Spot ◽  
Intersection Point ◽  
Tubular Joints ◽  
Photoelastic Experiment ◽  
Intersection Curves

The geometry of overlapping tubular joints, the equations of intersection curves and the coordinate of the intersection point are introduced first. The variational method for simple tubular joints is extended to the stress analysis of tubular K-joints with overlap. The computer program is compiled. The stress concentration factor and the position of the hot spot of an overlapping joint are found. For the sake of proving the feasibility of our analysis and program, the computed results are compared with experimental data of our photoelastic experiment and other experiments.

Experimental Study on Concentrating Scandium by Leaching from Associated Scandium Ore

2013 ◽  
Vol 734-737 ◽  
pp. 1033-1036
Author(s):  
Gui Fang Zhang ◽  
Peng Yan ◽  
Qing Rong Yang
Keyword(s):  
Experimental Study ◽  
Particle Size ◽  
Hydrochloric Acid ◽  
Acid Concentration ◽  
Hydrochloric Acid Concentration ◽  
Leaching Rate ◽  
Optimal Conditions ◽  
Research Results ◽  
Solid Ratio ◽  
Leaching Residue

Based on the benefication of the complex silicate ore containing scandium, the research about aid-leaching agent used in the leaching of the scandium concentrate was been conducted. And the suitable leaching agent and aid-leaching agent which the useful ions entered into leaching liquid and the harmful ions were kept in leaching residue were been found according to the experiment results. For the scandium of sample existed various complex silicate ore as isomorphism form, the research has adopted hydrochloric acid with aid-leaching agent to dissociate the silicate ore and make scandium entering into solution. The research results has shown that the scandium leaching rate could reach 92.06% under the optimal conditions which the hydrochloric acid concentration is 22.8%, the dosage of aid leaching agent is 6%, liquid solid ratio is 4:1, particle size of leaching material totally is less than 0.15mm and leaching time is 8h.

Experimental study of hypochloremia

1935 ◽  
Vol 31 (8-9) ◽  
pp. 1112-1112
Keyword(s):  
Experimental Data ◽  
Experimental Study

Analyzing clinical and experimental data on hypochloremia, the authors show that both during vomiting and when giving diuretica, it is not only about the loss of chlorine, but at the same time a large amount of water is lost.

Results of an experimental study of hydrogel drainage containing ranibizumab in antiglaucoma operations

2021 ◽  
pp. 63-67
Author(s):  
I.I. Khusnitdinov ◽  
Keyword(s):  
Experimental Study ◽  
Hyaluronic Acid ◽  
Key Words ◽  
Experimental Research ◽  
Experimental Studies ◽  
Glaucoma Surgery ◽  
Control Group ◽  
Morphological Studies

Purpose. Еxperimental substantiation of the effectiveness of biocompatible biodegradable hydrogels based on hyaluronic acid and chitosan succinate as a carrier of ranibizumab in antiglaucoma operations. Material and methods. Hydrogel drainage (HD) was obtained immediately before surgery. A solution of ranibizumab (0.23 ml) was mixed with a solution of hyaluronic acid dialdehyde (0.5 ml), then a solution of chitosan succinate (0.5 ml) was added. Experimental studies were performed in 12 (12 eyes) healthy rabbits. The first group consisted of 6 eyes – 0.187 ml of ranibizumab per 1 ml of gel. In the control group, HD was used intraoperatively without the addition of ranibizumab (6 eyes). Morphological studies were performed on 7th, 21st, and 42nd days. Results. In experimental studies in vitro and in vivo, it was proved that ranibizumab, administered as a part of 0.1 ml of hydrogel drainage in the antiglaucoma surgery area is released within 3 weeks and suppresses vascularization, scarring of the operating area, and preserves the intrascleral cavity. The optimal concentration of ranibizumab was selected-0.02 ml in 0.1 ml of gel. Conclusion. The safety and effectiveness of the use of hydrogel drainage with ranibizumab based on hyaluronic acid dialdehyde and chitosan succinate in anti-glaucoma operations has been proven. Key words: experimental research, hydrogel drainage, ranibizumab, glaucoma surgery.

Sign in / Sign up

Export Citation Format

Share Document